Cannot install Windows updates and cannot install new programs due to Error Codes: CODE C355, Code 80070652

Similar Questions

• Installed a Windows Update and now 5 Lightroom keeps showing an error message, and then exits.

  Windows Update and now when I try to open Lightroom it gives me a message that says "Lightroom has encountered an error when reading it is an overview of the cache and will try again during the reboot" reboot is not good at all.

  The problem you are experiencing is not related to an update of Windows. The preview cache is corrupt. You must use Windows Explorer or the Finder to open the folder that contains your catalog. Find the folder that has the extension .lrdata and delete the entire folder. Then, launch Lightroom as you normally would. Lightroom will be in the construction of a new Preview file and you should be able to continue normally.

  I don't know the reason, but a lot of people have experienced this same problem. Take a look at the more "like this" list to the right of this message. It is more common than you might expect.

• I can't install Windows updates security for Microsoft Office System 2007: 646 error Code

  I can not install the following Windows updates:
  Update for Microsoft Office System 2007 security:

  Update of security for Microsoft Office Excel 2007 (KB982308)
  Update of security for Microsoft Office InfoPath 2007 (KB979441)
  Update of security for Microsoft Office PowerPoint 2007 (KB982158)
  Update of security for Microsoft Office Word 2007 (KB982135)
  Update of security for Microsoft Office System 2007 (KB982312)
  Update of security for Microsoft Office System 2007 (KB982331)

  I get the error code 646.  If someone could help me, I would appreciate it.

  Hello

  Here's what I recommend you do:

  1. disable UAC (do this if you are using Vista or Windows 7, otherwise, go to step # 2). Comes down

  restrictions - turn it off completely.
  2 restart your computer for the change to take effect.
  3 re - download the update of security for Microsoft Office System 2007 (KB982331) from the link below:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=7f89a734-cda4-4abb-9a10-f6dfe560e8d0&displaylang=en
  4. install. It should work fine.
  5. If it still does not work, try to open all or part of your MS Office applications (such as MS Word, MS Excel, etc.).
  6. follow steps 3-4.
  7. If it still does not work, follow step # 3 again. After you download it, try unplugging your computer from

  Internet (unplug the internet cable or turn off the modem). Then, try to install the downloaded file

  (KB982331). It should work this time.

  Do the same for all the updates that come with KB982331, IF ANY.
  Let me know your results.

  WARNING: This is only a WORKAROUND and not a RESOLUTION. The resolution is displayed as soon as we have it.

• Windows update fails on XP Pro SP3 with 0x8007F064 error code.

  Windows update fails repeatedly on XP Pro SP3 with 0x8007F064 error code:

  Update security for Windows XP (KB2661637)
  A security update cumulative for Internet Explorer 8 for Windows XP (KB2647516)
  Update security for Windows XP (KB2660465)

  Update works fine until yesterday. Microsoft tool ran (no change), reloaded Windows Update (no change), a tool for malware own virus check comes to nothing. Any ideas?

  Since it is a Dell computer, chances are a Norton or McAfee free trial is preinstalled. When you have done the clean install, the free trialware would have ALSO reinstalled (but not valid now).  Let's see if the execution of two removal tools & a few tweaks resolves the behavior.

  [You can print these instructions for reference offline. [If a step said to restart, restart! ]

  1. click right on the following link to download the Norton removal tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. right click on the following link to download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. double-click on the file that you saved in # 1 a above, to run the utility. DO TAP not your keyboard until the race ends, then restart.

  3. double-click the file that you saved in # 1 b above to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  4 start | Settings | Control Panel | Add/Remove programs. Set Program Access and Defaults: select (check) the CUSTOM [<>] configuration option, and then click the arrows pointing to the far-right | Browser: select "Internet Explorer" here (to not "use my current... »). [1]

  Illustration: http://teamtutorials.com/wp-content/uploads/2007/05/set-program-access-defaults-02.jpg

  If you return to check the out parameter #1 above, it'll be "Use my current..." "but now it's going to be"point"to IE so that you don't need to change anything or reset. [Think of it.]

  5. now check your settings here: IE tools | Internet Options | Programs | Default web browser: If the make default button is NOT dimmed, click/press it.

  6. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 & run the difficulty.

  Note => for best results, check the option Remove personal settings .

  7. IMPORTANT - don't SKIP THIS STEP! Open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 of => [ignore the title & symptoms].

  7B. do disappear/close the troubleshooter automatic pop - up; then...

  7 c. run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [2]

  8 restart once more.

  9. open Internet Explorer (only!) at http://windowsupdate.microsoft.com . Select CUSTOM and scan | See if you can install all the available now security updates (i.e., KB2660465, KB2647516 or KB2661637).

  -Online if an update of root certificates is listed under the category of updates software optional on the left side of the window of scan results, install it to enjoy greater security of IE8. [3]

  Tip: Do NOT install any other updates software optional or any updated material in option .

  10. in response to this post with a status report.

  Good luck!

  ==================================================
  [1] once you get the missing updates installed, do not hesitate to make Firefox default browser.

  [2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove programs.

  [3] MS provided the distribution of a new version of update root certificates on Tuesday, 28 Feb-12. Until then, the update root certificates , released on 22 Nov-11 will be offered. MS usually new versions of root certificates update releases every 3 or 4 months.

  [Last updated - 24 Feb-12, 19:47 UTC]

• Code 10: Your device cannot start - CD/DVR. It was working fine until I did a windows update and it stop working.

  Code.10; Cannot start your device - CD/DVR, it was working fine until I did a windows update and it stop working.

  Original title: code 10

  Hello

  Read this link which has also a few solutions:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  --------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I try to install in Windows update and they fail. He said cannot acess Windows install.

  I tried all the solutions I've seen displayed and nothing has worked.  It was working fine and then 2 weeks ago everything just stopped. I get a code error 80070641 and a code 0641... There must be something out there.  The PATCH program says it fixed and it really didn't.  My System mechanic says he has set and he didn't.  I download a lot just impossible to install anything.

  Here, any help would be greatly appreciated!

  Lisa

  tried this and when I right click on it the registry open in Notepad, and nothing happened.

  So not real - you what to try next.

  Lisa

  NOT continue using System Mechanic until there is a permanent fix of Iolo.

  Contact Iolo (iolo.com) support

  System Mechanic "cleaning the registry" has put a double whammy on your system in having abducted two registry keys.

  The following will set things in order for the registry {at least for service setup}, so that you can then move on to redo the update of Windows.

  These are for VISTA systems<>

  Download this file from Ramesh S http://www.winhelponline.com/fileasso/regfix_vista.zip

  Save it to your DESKTOP.

  Extract the contents to your DESKTOP.

  Click Start, type

  REGEDIT and press ENTER key

  from the main menu, select file

  then Select IMPORT

  Access the dialog box (click the icon on the DESKTOP on the left to select)

  type regfix_vista.reg in the file name text box and click on the Open button.

  Once the merger is completed, you will see a confirmation message.

  Click OK when finished.

  Then download this second registry-fix

  Download and SAVE on your system (on the desktop or in a single folder) following the registry-fix file
  http://download.bleepingcomputer.com/win-services/Vista/msiserver.reg

  Right click on the msiserver.reg file and select MERGE

  Allow him to merge into registry.

  If you are prompted by User Account Control UAC, allow to go forward.

  If and only if the Merge option is not available, and then double-click the file and allow it to merge into the registry.

  IF and file '.reg' appears in REGEDIT, when you are prompted whether to merge answer Yes.

  When finished with two registry patches, leave / close REGEDIT.

  then the costs of closing of session and restart Windows.

  Now try Windows Update again in a new race.

  Only a custom scan.

  Simply select the critical or important updates. (non - select all those in option).

  Let me know if it helps. and if so, please click the Green useful icon to the left.

  If this solves the problem of the installer, please click MARK it on the right.

• Cannot install Windows updates and updates Antivirus on Windows Vista

  Original title: laptop computer started to freeze on virus scan always on the same folder.carried on the full recovery of the system partition on laptop, then only left with factory shipped programs. Unable to download windows updates or antivirus updates.

  OS Vista Home premium version 6. No display service pack not installed? THAT IS TO SAY 7. After the system recovery, I had 2 anti-virus bootable and performed analytical full but neither anything picked up.

  Hello

  ·        What happens when you try to update windows? You get the error message?

  ·        What are the updates you are trying to install (KB number)?

  ·        What security software you use?

  I suggest to disable the security software and then try to install windows on the system updates and checks to see if you are able to install or not.

  Note: Activate security software once you've done the test.

  Check in the window update and we do know are the updates that you try to install on the system. See the article mentioned below.

  Updates: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

  Step 1:

  It may be that some third party software is running in the background which is interrupted, I suggest you do a clean boot and check. To perform a clean boot follow the steps mentioned in the link given below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you have finished installing, follow step 7 to start the computer in normal startup.

  Step 2:

  Reset windows update components and check. Follow the steps mentioned in the article below.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

  Step 3:

  I suggest you to run some Surinamese check check the article mentioned below.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821/en-us

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Code 80070241 in Windows update and "Windows cannot verify the digital signature for this file" when you try to run any program.

  Windows Update has appeared today when we started one of our machines, informing us that there are some installed updates. After reviewing the updates, we clicked on the "Install now" button, and immediately, it failed with the above error code.

  I tried to run regedit a reason unrelated, and it came with a dialog box error with "Windows cannot verify the digital signature for this file. A recent hardware or software change might be installed a file that is signed incorrectly or damaged or maybe it's a malicious software from an unknown source. »

  After researching here and elsewhere on google and did not find anything suitable, put us in the Win7 disk, recovery tools and tried to go back to a previous system restore point (3 days).

  The restoration went well, restarted, but the problem persists.

  Then, we just tried to install anti-malware software, but when trying to run the installer, we get a different error message indicating 'ShellExecuteEx failed; Code 577 "and then the same message on the verification of the digital signature.

  The computer is running fine all yesterday and has worked very well since just after the new year when he has been upgraded to Windows 7. No material changes have been made, and no software changes were made by users in the course of last week.

  The computer is an AMD Athlon II X 4 with 4 GB of RAM on a motherboard Asus M4A78-EM, linking a 64 GB SSD, with a 250 GB drive SATA data/programs. GPU is a Nvidia 260, and it has a CD and DVD player as well. It is connected to our router using the gigabit ethernet interface motherboards.

  It was under windows 32 - bit XP SP3 up just after the new year. When we put in place the new SSD to replace a hard drive older than we have did a new install of XP (slipstreamed with SP3) and then used the upgrade 32-bit W7 Home premium DVD version to upgrade the system. Since then, the system runs flawlessley.

  On the machine is MS office XP, Firefox 3.6.3, AVG 8.5 and a few games such as the Turbine DDO.

  The main user account used to try to solve these problems and to run Windows Update and try installing programs is a member of the Administrators group.

  Firefox works fine, serve, and he plays the games installed very well also. AVG reports to date, with no problems and has detected no threat.

  However, try to view the registry with regedit, or start Viewer event or compmgmt.msc that all do appear the message "cannot verify the digital signature.

  ***************************************************

  Can anyone offer an opinion on what might be wrong with this facility please, and how we could do to solve?

  Cannot run chkdsk/scandisk as he bought the message "cannot verify the digital signature" etc etc.

  This morning, the machine began to behave differently - stop playing back badly, refused to start Device Manager, open Control Panel correctly etc.

  So, I reset the BIOS to boot from the CD-ROM, slapped XP SP3 in reinstalled, then upgraded to Win 7 again.

  Still have no idea what caused the problem, but it seems to be gone now - reinstalled the same applications, AV / programs anti-malware, games, etc and everything seems to go fine now.

  * shrug *.

  Computers.

• I am trying to install Windows Update and get 800F080D for IE9. Why?

  I am trying to install Windows Update and get 800F080D for IE9.  Why?

  Hi KevinMiller

  
  1. don't you get the error only during the installation of internet explorer 9?
  2. when exactly you get the error message?
  3. that you get an error when installing other windows updates?

  I suggest you to check if you have all the prerequisites installed for internet explorer 9.

  http://support.Microsoft.com/kb/2399238

  
  Refer also to the links below and check if you did all requirements before installing internet explorer 9.
  http://support.Microsoft.com/kb/2409098

  http://Windows.Microsoft.com/en-us/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9

   

  I hope this helps.

• I accidentally deleted the windows installation program and I am unable to install new programs

  Original title: windows setup

  I accidentally deleted the windows installation program and I am unable to install new programs. Is there one solution other than reinstalling windows?

  Please start the prompt with admin rights [1] and run sfc [2]:

  sfc.exe/scannow

  CFS was able to reinstall Microsoft Installer?

  Best regards
  Amdre

  [1] http://windows.microsoft.com/en-US/windows7/How-do-I-run-an-application-once-with-a-full-administrator-access-token
  [2] http://support.microsoft.com/kb/929833 "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Cannot install updates - error Code 80070652

  I get error Code 80070652 when you try to install the following updates:

  1 ~ update of security for Microsoft Office System 2007 (KB982312)
  2 ~ update of security for Microsoft Office Excel 2007 (KB982308)
  3 ~ update of security for Microsoft Office InfoPath 2007 (KB979441)
  4 ~ update of security for Microsoft Office PowerPoint 2007 (KB982158)
  5 ~ update of security for Microsoft Office System 2007 (KB976321)
  6 ~ update of security for Microsoft Office System 2007 (KB982331)
  7 ~ update of security for Microsoft Office System 2007 (KB2277947)
  8 ~ update of security for Microsoft Office Word 2007 (KB2251419)

  Help, please. Thank you.

  The error code means that there is an installation that is already running.

  Try to restart and then try to install the updates.

  TaurArian [MVP] 2005-2011 - Update Services

• I can't install new programs. Installation window seems to have been lost.

  I can't install new programs. I get a sayijng error message windows setup program cannot be found. I think I might be errased accidentally a dll file when I uninstalled it a pogram and I don't know how to get it back. I do not have a windows disk anc I lost my disc of p of departure.

  To unregister and re-register Windows Installer:
  Click Start and then click Run.
  Type in the Open box: msiexec / unregister, and then click OK.
  Click Start and then click Run.
  Type in the Open box: msiexec/regserver, click OK.
  Type the commands exactly, including the space between c and /.
  This will not affect programs that use Windows Installer that are already installed.

  and/or

  Windows Installer 4.5 is available
  http://support.Microsoft.com/kb/942288

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Just installed Windows 7. Windows udate watch 21 important security updates but they will install. I get the error code 80070539. Tried to install the updates but the shut down the computer, but the computer stops until they install.

  Just installed Windows 7. Windows udate watch 21 important security updates but they will install. I get the error code 80070539. Tried to install updates by shutting down the computer, but the computer stops until they install.

  Hello Tallydupp, welcome.

  Do you by chance have Google Desktop? Some users have reported interference problems in Winodws 7 while using an older version of Google Desktop.
  Try to uninstall it if it exists.

  Let us know what happens

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I use Vista SP2 and updates continuously fail to install. I now get error code 800719E4. Can anyone help?

  I got different error codes and followed the advice online for each of them. I renamed my temporary folder updated and deleted all temporary update files and folders as suggested advice. The problem is not yet solved. Updates install fine, but then once I reboot they fail and windows reverts the changes. I now get error code 800719E4. Can anyone help?

  . Unfortunately that has not fixed.

  what application anti-virus or security suite is installed and your current subscription?

  What third-party firewall?

  It's what you tried, if not, please do it might help

  The first thing we do is to disable all firewals / anti virus running. This can sometimes block windows update and therefore cause errors like the one you describe.

  How to ask a question
  http://support.Microsoft.com/kb/555375 >

  It helps those answering questions if you provide:

   

  you use what browser (exact version).

  what application anti-virus or security suite is installed and your current subscription?

  What third-party firewall

  What other software products anti-malware are installed and running?

  What updates you trying to install? (Number of KB)

  Please do it in your next reply.

  Information you provide will help someone to provide you with a relevant solution.

  UTC/GMT is 17:28 Thursday, September 8, 2011

• How to prevent users from installing new programs in Windows 7

  Hello

  I need to prevent users to install (and download) of new programs in Windows 7. I am responsible for three computers. They are not on one network (other than the internet, of course).

  I read the article "How to prevent users from installing new programs in Windows 7" but I'm not sure what choice to make when I get to the choice of Windows Installer. I'm also not quite know how to cancel that so I can install the software when I have to. I've never done this if I want to be very careful.

  Can anyone help?

  Many thanks,

  KK

  Are their accounts 'Administrator' or 'Standard' user level?

  If they are directors of the machine, and then create a new Admin account (only you know the password) and then lower their Standard user accounts. If they attempt to install programs now it should be prompted to enter the Admin password that they won't.

  User accounts - https://support.microsoft.com/en-us/kb/2663817

  Also see http://www.sevenforums.com/tutorials/299-user-account-control-uac-change-notification-settings.html for info UAC - and adjust the required level.

  If their accounts are accounts administrator and for some reason must be a competent user, then will probably be able to undo everything you put up anyway.

  PS - what specific article?