Cannot install XP updates in a new virtual machine

Similar Questions

• Cannot install VMware vCenter Server on a virtual machine

  Hello world

  I'm new to the forum. I try to install the vcenter server in a virtual machine.

  Configuration of the VM: 10G VMDK, used 7G... 2G memory... guest operating system is win XP Pro.

  When I run the Setup it says:

  This installation package could not be opened!

  I have attached a JPG of the error. Can someone please!

  Kind regards.

  64 bit is not supported as a host to vCenter operating system, see the compatibility guide posted above.  I would try to mount the ISO using the client machine instead of starting from the ESX host, it could be that your DVD image is not good.

• Windows 7 Edition Home Premium (student edition) x 64: how to do a clean install into a new virtual machine?

  After downloading Windows 7 Home Premium 64-bit student supply store online, I have now three files: Win7-HP-Retail-en-us-x64.exe, Setup1.box, Setup2.box.

  How to create an installation disk or an ISO image of these files, so that I can do a clean install of Win7 in a new virtual machine?

  It turns out that it's a known issue:

  http://www.mydigitallife.info/2009/10/23/how-to-create-and-make-bootable-Windows-7-ISO-from-exe-plus-Setup1-box-and-setup2-box-files/

  I hope this helps.

  Please give the points if you found it useful.

  http://www.1zero1.NET

• URGENT! After installing 6 Fusion and creation of new virtual machine with Windows 7, I get a message "VMware Fusion cannot enter the unit". WHAT SHOULD DO?

  After purchase, installation and activation Fusion 6 with the license key, I had a library of VMS showing 2 Boot Camp partitions. It's strange that I only have 1.
  I tried to activate them but received a message that it is out of date in 2 cases. (see annex 1)

  I started a new virtual machine with a Windows 7 installation disc directly on my HD. I have provided a way to do this and followed the instructions of Fusion to the screen.

  Apparently, everything went well and after several restarts, the installation appears to be over (see annex 2) I tried to open and run the installed Windows 7. I had however a window with the following message:

  "Pending the unit.

  "VMware Fusion cannot enter the unit. Please wait until the unit starts automatically, or interact with the virtual machine below. ' (see annex 3)

  Here Windows 7 seems to start but after a while with the home screen and of the Øresund finishing this window closed and open a new window called library Virtual Machine on the left showing the partitions of Bootcamp and the Virtual Machine Windows 7 x 64 and in the middle gray a representation of what is supposed to be the Windows 7 desktop. (see Exhibit 4). When I opened the settings button a window with different setting options pops up. This mark means to me that Windows is installed but the final opening isn't the case

  When you quit Vmware Fusion indeed Windows seems to be close (see part 5)

  What is going on? What has gone wrong? What should I do? I don't know how to solve the problem.

  I should f.i. remove the virtual machine from Windows 7 and is free automatically made partition on my HD as the reboot with the Windows installation disc? or y at - it another way to enter the UNIT?

  Help, please!

  Thanks in advance

  Your virtual machine is running. It is in the unit - which each windows gets its own window of Mac - and you have no application Windows running, there is no visible windows. You can start a Windows application in the start of Fusion menu in the menu bar at the top right, or turn on the Windows task bar on the view menu and start applications from there. Or use the view menu to switch to the Single mode or full-screen, which puts all of your Windows desktop in a window separate from Mac.

  You do not have two partitions to Boot Camp on your Mac, you have two virtual machines named "Boot Camp partition".

  The message about it being unable to enter the unit arrives while the merger is pending for the tools begin to run, because the tool is necessary for the unit.

• Users cannot install the update of my application and impossible to reinstall the application.

  I have an App World app, the first time, it's a free app (ver: 0.9), but later I changed it for a paid app. recently, I published a new version of this app (ver: 1.0) and free package upgrade.

  But users who have installed my app when it's free cannot install the update!

  I Can't download the update. I keep getting the following error "There was a problem installing...please try again." I've retried many times and reset my device but nothing works.
  

  software shows an update to Version 1.0 from .9 however,
  the update errors out and fails to download.
  

  They tried to delete the app first, but they can not reinstall it, even if they want to buy, but App World allow them to do!

  I tried uninstalling it and now I can't reinstall it. ???
  

  I can not even reinstall from appworld.
  Let alone purchase.
  

  but i try to paid for it and when i go to do it, it dont allow me
  

  It is really strange, what do I do?

  I feel your pain, but you can't do much. This is a known issue with AppWorld during the passage of the free paid, thats why this option is no longer available for providers.

  The only way to mitigate the damage, push a paid upgrade, say version 1.1. Make sure that the upgrade price paid matches the original price of app, otherwise it would be confusing to users.

  Advantages of such an approach:

  -Users who want to pay will be able to download the upgrade, you get the money

  Disadvantages:

  -You will get a lot of negative comments from users who have as free version

  -Those who have already purchased as paid app will have to pay to upgrade too

• New virtual machine cannot reach gateway all-in-olders Yes

  Hi, I'm using ESXi for a year with no problems, but now I'm having a very strange situation. New virtual machine cannot reach the front door, while the 'old'. New virtual machine can ping olders VM and vice versa, but new looks as private. I tried different OS and still have the same question.

  That's what I have:

  Reference DELL R610 with RAID - 1 and RAID-5

  ESXi free 348481 4.1.0

  1 card NETWORK connected

  IPs public 16

  4 VM (W 2008 32bits, W 2008R2 64, 32 2008 W, W 2008 64) works perfectly

  All VM are stored on the local Datastore2 (raid-5)

  Last week, I installed:

  1 Openfiler ESA (gateway problem)

  1 W 2008 R2 (gateway problem)

  1 W XP 32 (gateway problem)

  1 W 2008 32 (gateway problem)

  Older VM never lose connection with gateway and beyond

  New never manage to bridge

  I can't manually add gateway IP/mac address (error 5) in the new.

  Anyone can figure it out and how to solve? I'm really lost.

  Thank you

  New virtual machine can ping olders VM and vice versa...

  This excludes actually questions 'virtual '. The vSwitch has no restrictions.

  What kind of physical switch are you using? If this is a CISCO switch to ensure that the port is configured as a port of access (or trunk port) and spans tree portfast is. Some CISCO switches have a "macro"set desktop on their ports which limits the number of MAC addresses that are allowed on the port.

  André

  PS: Please don't ask me. Did you check the address of the gateway AND subnet mask are correct for the new virtual machines?

• Failed to create new virtual machines on a new install of Vmware Server2

  We just got a new host, a HP DL980 G7, with hearts 62 x 2 GHz and 512 GB of ram.

  We installed RHEL 5.6 and ran yum update to make it current.

  Installation of Vmware Server 2 and open ports in firewall for 8222/902/8333.

  Created an account vmadm and pointed the VM directory here.

  IM able to connect to the infrastructure of the web and go through the motions of creating a new virtual machine.

  Infrastructure establishes a new directory and the files of the virtual machine.

  However, when I try to start the virtual machine, it just stops after a few seconds.

  I get the following information:

  Description:

  " Message from host: * error internal monitor VMware Server * vcpu - 0:Platform MPN check failed: mpn = 0xefff009Please report this problem by selecting the menu item help > VMware on the Web > request support, or by going to the Web page" http://VMware.com/info?ID=8 & logfile=/DB6/VMS/VM0/VMware%2elog & coreLocation=/DB6/VMS/VM0/VMware%2dcore%5B0%2D1%5D%2egz ". Please provide us with the log file (/ db6/VMs/VM0/vmware.log) and the core files (/ db6/VMs/VM0/vmware-core[0-1].gz). If the problem is reproducible, please set "Logging level" to "Debug" in the Panel of "Miscellaneous" settings of the Virtual Machine. Then reproduce the incident and submit it according to the instructions. To collect the data to submit to the VMware support, select help > topic and click 'collect support data. You can also run the script 'vm-support' in the folder my computer directly. We will respond on the basis of your entitlement to support. Thank you for your feedback-VMware Server team.

  I can't find anything on the server 2 and esx limits can be found here:

  http://www.VMware.com/PDF/vSphere4/R40/vsp_40_config_max.PDF

  I don't know what is your experience with this database, but from what I've seen performance problems of database in the virtual machines are usually caused by bad disk i/o. CPU or memory must not be the problem in a virtual machine.

• New virtual machine cannot see host DVD rom

  I installed VMware ESX 3i 3.5.0 Build 123629 on a new Dell PowerEdge 2900 and began the process of adding new virtual machines. The Issus is that when I start the virtual machine and intsaller attempted the BONE of the guest virtual computer does not see the DVD, even if it is the setup of the virtual machine. When I go in the settings of the virtual machine and try to set up DVD to use the host device, I get the message that no device is available. Help...

  

  SATA has always been a little flakey when it comes to ESX.  You should maybe update your BIOS or make some small changes in the BIOS for him to see the player.  A quick fix would be to create an ISO of the DVD that you want to use and upload it to your data store to use until you get the problem solved.

  • Kyle

• Cannot install the update error

  I'm trying to update my iPhone 6 16 GB running iOS to iOS 9.3.1 9.2.1 but when I try to install the OTA update it says "cannot install the update." How could I solve this problem? The contact ID is not available because the unit is gray with a white screen and a contact ID button or space, which affects the update process?

  I would try to update via iTunes

  Connect the device using a cable to a computer (PC or Mac) running the latest version of iTunes 12.3.3

  The time that the phone is detected, choose software update

  If the phone is not detected - see here

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

  OR

  Please take a genius appointment at an Apple Store, or select another authorized service provider.

• Cannot install Windows updates (has no status) on the computer desktop and laptop

  Desktop               (Purchase date: 13/07/2010)

  Model: Pavilion p6402f or 6402f

  Product: BK275AA #ABL

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 1 64-bit

  Product ID: {removed privacy}

  Portable               (Purchase date: 14/07/2011)

  Model: Pavilion g6 Notebook PC

  Product: QD317UA #ABC

  Serial No.: {removed privacy}

  OS: Windows 7 Home Premium Service Pack 164-bit

  Product ID: {removed privacy}

  Description of the problem: same problem on the computer desktop and laptop at the same time began: cannot install Windows updates (has no status)

  No hardware changes or software recently made to the system: I followed the usual procedure to install Windows updates.

  Method of connection: wireless

  Technical expertise: intermediate level

  Performed troubleshooting: because the error # 80071 A 90 type indicated by the system, I followed the instructions of Windows Help and Support, for example to run Microsoft Fix it which did not work; a more advanced method has also been used, who recommended to start Windows Update in Mode safe, then open Windows Update and install the updates and then restart normally. At this point, the problem was that any stage of Windows Update was available.

  Hello amib004,

  As much as I know, only Windows Update cannot be run in safe mode. That being said, I saw where install several updates may conflict with each other. Try to disable all updates installation and install the updates failed one at a time.

• My laptop cannot install windows update. Error found: 646

  My laptop cannot install the update to windows. Error found: 646

  For error 646, it's popular-

  http://support.Microsoft.com/kb/2258121

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Cannot use windows update after the new installation of xp sp2

  Cannot use windows update after the new installation of xp sp2

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Cannot install window updates 14 altogether 646 of the code

  Cannot install window updates 14 altogether 646 of the code

  luckyslap,

  read the problems known in this page, they explain what to do. There is a link to a fix the article.

  http://support.Microsoft.com/kb/2258121

  Let us know if this helped.

• Cannot install the update properly

  Hello. I use Windows vista basic and I've updated my com on a regular basis. However, there is a particular update, I'm unable to install KB955430, which release date is 05/15/09. It comes with a bunch of other updates on the same day, I have install successfully. However, it fails each time, which gives the error code: 800F082F, asking me to restart the computer. I get the configuration update message every time I stopped the com and launch it. Although it doesn't matter how many times I tried, the update fails. I also tried to download the update from microsoft web itself, "Windows6. 0-KB955430 - x 64. However, it is said that it is not intended for my com. Please help, thanks.

  Hi kuchimeh,

  Thank you for visiting the Microsoft Vista answers Forum!

  This is a known, problem if you install this update through Windows Update, you receive the 800F082F error.

  Cannot install this update with the other updates. Therefore, if you have already installed other updates without rebooting, and then you try to install this update, you may receive error 800F082F. To resolve this issue, restart your computer, and then install this update again.

  To install this update, please follow this knowledge base:

  Description of the Windows Vista and Windows Server 2008 installation feature software update released April 28, 2009:

  http://support.Microsoft.com/kb/955430

  I hope this helps.

  Let us know if you need more assistance.

  Kind regards.

  Nicolas Mathieu

  Visit ourhttp://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• XP - cannot install security update KB979683

  Cannot install the update of security for Windows XP (KB979683) - for several weeks now

  The error codes? Windows XP sp level?

  This update: http://support.microsoft.com/kb/979683

  • On some Windows XP systems, this security update can be reaffirmed. This problem occurs because certain binaries are in a State "unsigned". To resolve this issue, follow the steps in the "method 3: rename the Catroot2 folder" section of the following article in the Microsoft Knowledge Base:
  822798 (http://support.microsoft.com/kb/822798/) you cannot install some updates or programs

  TaurArian [MVP] 2005-2010 - Update Services