Cannot log on to user accounts

Similar Questions

• Error message: "cannot run from limited user account" using flight simultor 2004

  Original title: have been using flight simultor 2004 for several years, all of a sudden FS9 does not start. Windows XP - e

  use for several years, that all of a sudden FS9 does not start. error message says cannot run a restricted user account, log in as an administrator, but I am administrator and we tried to switch users without result. -any ideas please? Windows xp

  Hi Sethshaw,

  1. did you of recent changes on the system?

  You can create a new user account and check if the game works.

  How to create and configure user accounts in Windows XP

  If you are not faced with the question, you can visit the following link to resolve the damaged user account.

  How to recover damaged Windows XP user profile

  Hope this information is useful.

• Cannot create a new user account, the user profile service service does not log and cannot install a program

  I can't create a new user account (Windows 7): the user profile service service has no logon.

  I have an administrative account which is the only account. I have problems with the installation of Autodesk Inventor so I need to create another user to see if I can solve the problem. But when I want to make a new user account and I get the following message: I can't create a new user account (Windows 7): the user profile service service has no logon.

  I haven't added new programs in a long time and I don't know when this question has been raised as I've had my laptop for 3 years and this is the first time I create another account than my original. I don't want to reset my computer manufactured settings.

  I also followed the http://support2.microsoft.com/kb/947215/en-us but I can't find any registry master in the list of profiles. In fact, I am the only user in there...

  It seems that my computer does not have a record in the system registry.

  In fact, the problem started when I tried to fix the "C:\windows\system32\config\systemprofile\desktop refers to a location that is unavailable. It could be on a hard drive on this computer.or on a network. Check to make sure that the disc is inserted correctly, or that you are connected to the Internet or your network, and then try again. If he can't always find the information could have been moved to another location. "I was at least able to connect in the new user but will load a default profile and therefore do not load the profile properly. It seems I've done worse the problem after doing

  gpupdate/force

  at the prompt as an administrator.

  The very initial problem started all this was when I was running from Autodesk Inventor, it gives me the following error: Mismatched Ole32.dll and Comcat.dll. And the support2.microsoft.com/kb/201364/en-us is to say that since I am under Win7, the solution is not applied. So I'm stuck. And the next move was trying to see if a new user profile may solve the problem.

  Any suggestions will be greatly appreciated.

  And if possible, please also suggest a "repair" method so I can get Win7 function correctly without reinstalling the whole machine. "" I use a laptop so I do not have installation media.

  Thank you.

  Hello

  Thank you for your update on the issue.

  I suggest that you try to run the file system (CFS) Checker scan to check all the corruption of .dll files.

  1. Go to Start, click all programs and open the Accessories.
  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.
  3. In the command prompt, type the following command and press ENTER:
     sfc/scannow

  For more information, see this link:

  http://support.Microsoft.com/kb/929833/en-us

  Please post back your results for assistance.

• Lockout C drive. Cannot change the permissions, cannot not disable the user account control, unable to open the access control editor, cannot change the property.

  While trying to change the folder permissions for a second user on my computer, I did something that I lock my C drive.

  When I log in with the administrator account, I get the following popup:

  C:\Windows\System32\SystemPropertiesComputerName.exe
  Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.

  I am not able to access denied drive from C to all 'access '.

  When I right click on the C drive and select Properties > Security tab > go on, said the popup "cannot open the access control editor. Access is denied. »

  When you select Properties > Security tab > advanced > owner tab > continue, current owner says "unable to display current owner. Can not change, cannot be changed.

  I can't turn off user account control, nothing happens when I click the icon or the text.

  I was able to create the 'hidden' administrator account, but I can't do anything from there, either.

  Any suggestions?

  Hello

  Recovery disk will not help you perform the upgrade on the spot. I suggest to organise a Windows Vista DVD and try to perform the upgrade in-place.

• Cannot open my other user accounts... Download the message, that the user profile service service has no logon. cvannot loaded user profile

  Having only one administrator user account. All my other user accounts will get the above message. Help, please.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• cannot connect to my user account

  When I try to log in to my user account, I get the following message: "the service user profile Service could not connect..." User profile cannot be loaded. My fiance ' has no problem connecting to his account. Can someone help me solve the problem?

  When I try to log in to my user account, I get the following message: "the service user profile Service could not connect..." User profile cannot be loaded. My fiance ' has no problem connecting to his account. Can someone help me solve the problem?

  You haveanother admin account , you can connect?
  If so, please do and do a system restore, if no help, run the Microsoft Support tutorial below.

  If you don't have another admin account, go into safe mode.
  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and select Safe Mode with network.

  In the window of logon in safe mode...
  1 can connect to your account administrator in safe mode?
  If so, do a restore system first, if no help, run theMicrosoft tutorial support listed below.

  2. If you can't log into your own account, you see another admin next to your account in the logon screen?
  If you do, that one is the built-in Administrator account. By default, there is no password. Connect to it and new do a first system restore, if not help, run the Microsoft tutorial support listed below.

  If you are able to log on in safe mode, do a system restore. Choose a date when you were able to log in NORMAL MODE as your restore point.
  How to do system restore: http://www.vistax64.com/tutorials/76905-system-restore-how.html

  Tutorial from Microsoft support :
  http://support.Microsoft.com/kb/947215
  There are several methods,go through one by one.
  Method 3 has a "fix it for me" application
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• The administrative user cannot Log in, "the user profile Service has no logon. Pfoile user cannot be loaded.

  OP: Administrative user unable to Log in
  Dell Bostro 1000 using Vista.  When you try to open a session as long as the message from the administrator that is displayed is "the user profile Service has no logon.  Pfoile of the user cannot be loaded.  The administrator can connect to a different user account.  When she tries to reinstall Vista she gets the following message: must remove the power cell.

  Any suggestions?  Thaks

  Rick

  Hi Rick Ramza,

  I suggest you to follow the steps described in the article below and check if this solves the problem.

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. User profile cannot be loaded:
  http://support.Microsoft.com/kb/947215

  Kind regards
  Manasa P-Microsoft Support.

• Cannot create a new user account account & comments pasted as an administrator. How can I activate built-in Administrator?

  It's a long story, but it is a case of me not having only not the slightest idea of what I was doing and the things themselves are mean. I tried to access the built-in function

  Administrator on my laptop, so I could create a password for it and to transform my only other account user in a standard account. The only way I knew a bit about this world work (at the time) was going to safe mode (already did this on another laptop of mine and it worked,) but the built-in administrator is not. Unfortunately, when I do my first mistake a lot of errors, I decided that I could force the built-in Administrator"is displayed by the guest in an administrator account so I could turn off my main user account. I realized that I couldn't change guest in standard account so I turned it off as an administrator. When I'm home in safe mode I finally see the built-in administrator so I put my password for it, but I noticed the UAC did not have a password field to type and 'yes' is gray. Thinking that it was because I left the account called Administrator, until I turned it off I go to reactivate it if I could go back to the standard, but the guest account would not change back or extinguish again causing the built-in Administrator "to disappear from the safe mode and therefore, preventing me from the question of fixing.

  I've tried so far of troubleshooting:

  (Start, typed the CDM, run as administrator, typed user administrator / Active: Yes) Having failed, I got msg "System 5 error has occurred. Access denied. "

  (Start, typed the CDM, run as administrator, typed net users) see three accounts on my computer administrator, guest, and my main account.

  (Start, typed the CDM, run as administrator, typed 'Jack' xxyyzz net user / add) Having failed, I got msg "System 5 error has occurred. Access denied. "

  I tried to create a new account, but it still says "the specified account name is not valid, because account names cannot contain the following characters / \ []" :;|<>+=,? ". ' * ' , but I don't use any of these at all!

  Change the Standard user account to administrator did not

  I tried to disable the guest account, but that didn't work either

  If anyone has ideas or definitive answers to how to help me solve this problem would be very useful, thx!

  The guest on my computer account has administrative authority.

  If your guest account has administrator privileges (why?) then you can do this:

  1. Log in under the guest account.
  2. Click the start planet.
  3. Type cmd.exe in the search box.
  4. Press Ctrl + Shift + Enter
  5. Click on "Run as Administrator".
  6. Type the following commands and press ENTER after each:
     NET user administrator / Active: Yes
     NET user administrator 123456
     (to set the password to 123456)
  7. Log in as administrator.
  8. Plan ahead a little and create, test, and document an alternative admin account, even though you have a spare House key. This will save you a lot of trouble.
  9. Demote, then disable the guest account. There is a security risk.

• Cannot remove the old user account (admin)

  I'm on a MacBook Pro 15 "the retina with OS X Yosemite 10.10.5.

  I have two admin accounts, an 'old' I do not use and a more current that I use.

  I want to delete the 'old' admin account, but I get an error message: "cannot delete user... account error backup in the home folder for this user."

  Here are the steps I followed:

  1. System Preferences-> users and groups

  2. click on unlock icon; authentication with username and password

  3. click on the 'old' user account and click on the button "-" to remove it.

  4. Select the option "save the home folder in a disk image", then click on remove the user

  5. for the moment, he says 'delete account '.

  6 then I get the error message.

  I know that I could choose the second option (in step 4), but I really want to move the old files of the user users users/Deleted.

  Any advice or ideas would be greatly appreciated

  

  The first thing that comes to mind is the following: is there enough room for the disc to be created image and put in files? The files are not moved from the reader to the disk image, they are copied. Then for a time in the account to be deleted files will be on the computer two times. The second thing that comes to mind is that there is a directory of the hard drive problem. If you do not have enough space and is my first problem, start the recovery partition and use the directory of disk to repair the drive. And the third thing that might be the cause of the problem is a bad file that cannot be copied to the disk image. It will be difficult to understand because basically, you will need to open each file to find the one that is perhaps incorrect.

• Cannot create a new user account

  Hello and good evening,

  I have a laptop HP Pavilion I've had for about a month. I was creating a HP recovery disk. As I didn't have the right amount of available disks, I cancelled it. The next time I went to do the same thing, there was a message in the HP support assistant saying that the recovery disk was no longer available.  So I created an image of the system in case I ever needed to recover my OS. It was stored on drive C. I copied and pasted into the recovery d drive [I don't know if you can do].

  Anyway, some things have changed after I created the image of the system. The C: disk OS folder has been renamed Windows C:.

  I felt a little uncomfortable about the whole, so I thought that I create another user account. Hoping that this would also restore my HP Recovery disk.

  In any case, I went to do this and all seems to be OK, install applications and so on, until he came to a blue screen that says "Please wait". He remained on the screen for about 2 hours, after which the battery was flat. I repowered it and he started upward. He returned the same screen. I took the battery and plugged a USB based recovery disk. This led me to the Welcome screen, and I could log into my original user account.

  I'm not game to try again to create another user account in case something terrible happens and it does not restart.

  What should I do?

  1. create another user account give back me my recovery drive originalHP?

  2 could have another go to make him a corruption on my hard drive?

  I don't know if it's an HP or a problem of Windows 8, so I posted both.

  I hope someone can help

  Chris

  Hi jcdck,

  I see that you have some problems with your recovery disk. Create a new user account won't get your recovery disk. The same file structure will be implemented regardless of the user account. You should not generally be copy or save anything on the recovery disk.

  You should be able to restore your PC to factory settings , but you need to back up personal files on an external drive or burn to a CD. It might not get your recovery back disc because this isn't the Windows function of HP.

  Your only other option is to order the recovery CD for your model. If you can provide me with your product number I should be able to get your link to order. Are which country you located?

  Thank you

• When I try to log on my user account, it tells me that the client group policy has no connection

  I have two separate user accounts on my computer. one of the accounts that I can not connect because it tells me that the client group policy has no connection.

  Hello Monica,.

  -What is the exact error message you get?

  -Is your computer connected to a network of area?

  Follow the instructions on the article below to perform a system restore.

  How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account
  http://support.Microsoft.com/kb/940765/en-us

  Hope this information helps.

• Win Vista Home, will not let me log on to user accounts

  Whenever I try to log on to an account other than the administrator account user, I type the password, but then he says "Logging Off". I tried this for the other user accounts, and it keeps giving the same message. The only account that I am able to connect to, is the admin. I also tried to delete accounts while keeping the files, and in another case, completely remove the account and all the files associated with this account. Yet, the same message appeared. Im not sure what to do from this point. It's a laptop Toshiba, so it comes with a recovery disk, but I don't want to lose all the information I'm currntly installed on your computer.

  There was no other Off other than "Logging" error message?

  Is there a date when you have not had any problems to connect to other users accounts?
  If so, do you remember what date it was?
  If Yes, is this correct date more than 15 days ago?
  If no, and she was less than 15 days, then use this good as your restore point date and do a system restore.
  Start button > Search box, type System Restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Cannot remove a disabled user account

  Hiya!

  When I start my laptop I have three accounts, the one I use for my family when they really need to use, special guests and another account. That other account still connect for some reason, but when I click it, it said: your account has been disabled, please consult your system administrator.

  Now, I wanted to delete this account because it is causing trouble, but it does not appear in Control Panel. What can I do?

  Well I close my laptop, it brought on the day before, and then when I open it it will show me to select the account (as you would with any account that has a password), and underneath it says connected. I don't think this is supposed to be like that tho.

  If I turn my phone it will say: there are other connected users, they might lose data and whatever.

  OK, we're going to investigate this mysterious account. Please follow these steps:

  1. Click the start planet.
  2. Type cmd.exe in the search box and press enter
  3. Type the following commands exactly and press ENTER after each one:
     Set Log="%UserProfile%\Desktop\Log.txt".
     setting user > Log %
     NET users > Log %
     net users
     (now remember the name of the account involved in the list. "I'll call it xxx.)
     NET user "xxx" > Log %
     net localgroup administrators > Log %
     c:\Users dir > Log %
     Log %
  4. Mark and copy the text that you see and then paste in your response.
  5. Restart in Mode safe mode and check if the problem persists.

• Cannot cross the window user account controls

  When I download Firefox on Windows 8, I can't go past the control window user account. I answered Yes and no. It shows Firefox in my downloads, but it doesn't start. Any ideas?

  The downloaded file contained the word "stub" in its name? This Setup needs to connect to the Internet to download additional files, which may get blocked. You could try the 'full' Downloader instead. Scroll to your language:

  https://www.Mozilla.org/Firefox/all/

• Cannot connect to the user account

  Hello

  I have a Mac Mini end of 2012 running OXS El Capitan, while downloading the movies I did spill over from my hard drive, while this isn't a problem in itself when I restarted I am able to connect to my user accounts.

  Specifically what I see, this is the option normal user with the available accounts login screen - I select a configured account (I have 2 of them) enter the word of past (rightly), then instead enter the account, I get the login screen again.

  Strangely enough, when I select the guest account, I can get in.

  Any ideas how do past this and on the accounts?

  I tried to reset the NVRAM that allowed me to access disks and do first aid, it has not shown any questions or help, unfortunately.

  I have access to the Mac using a Windows PC, which allowed me to make space on the hard disk drive by removing some of the movies.

  Thank you very much

  Keith M

  Try to start in safe mode and then open a session and try to delete files to free up disk space.

  Try safe mode if your Mac does not end commissioning - Apple Support