Similar Questions

• join several swf files into a swf file

  Hello everyone

  I've been dealing with this problem for too long and decided to ask for help - how can I gather 15 swf files placed in a folder in a SWF one?

  I tried all kindes of the merger of programs like "Join (Merge, handset) several SWF Files Into One Software" and "WinMerge" without success and I tried to convert swf to flv (cause I found other software merging for flv files), but once again...

  I have CS5, so if I have to open Flash to do this I will, Although I try to avoid it, and even in this case I'll need complete instructions.

  All I need is this simple thing, so I'll thank very much any help

  Thank you & good day

  Keren

  To stay a bit brief, cannot join several swf files in a folder and have still things work if the files involve actionscript.  You need to have the fla files, and then you can copy the timelines of each fla in movieclips into one main file.  What you need to do if you don't have the source fla files is to dynamically load the separate runtime files.

• Friends of Hy. I want to ask that I am looking to get a pdf split software to split a pdf file into several PDF files with my set of pages specified. As if a document is 22 pages then I will specify the number of pages that must be cut in half to separate

  Friends of Hy. I want to ask that I am looking to get a pdf split software to split a pdf file into several PDF files with my set of pages specified. As if a document is 22 pages then I will specify the number of pages that must be cut in half in separate PDF files. for example I entered that do three pdfs of 1-5, 5-7, 8-10 pages and it will result in me

  first pdf = 1-5 pages

  second pdf = 5-7 pages

  Third pdf = 8 to 10 pages.

  Y at - there no way to do it with adobe acrobat or any other software? I tried many software including adobe with extract and split option, but I did not get the results you are looking for. so please:

  I would like to know if any of you have any knowledge about it. I have

  Thnanks in advance!

  Hi minixain,

  Yes, you can do it using Adobe Acrobat application (Adobe Acrobat free trial downloadversion |) Acrobat Pro DC), please refer to this document for help KB split a PDF | Adobe Acrobat DC tutorials.

  Kind regards

  Nicos

• Cannot open the project file with write access.

  I saw that this problem has been reported before, but have yet to find a solution.

  I have my project file in an external hard drive.  When I plug the hard drive to another computer and want to save it, I get this message:

  "Cannot open the project file with write access.  The file may be locked, or you don't have permission to write to this location.  Select Save as... »

  I don't want to register as because other projects refer to this file and also my file is still going to be ruined.

  FYI two computers use Windows 7.

  All solutions?

  Right-click on the folder in Question and select Properties. Select tab security make sure you that you then add everyone to the list of users. Do you this by selecting edit and then add. Type in all members of the section of the object, and click ok. Then select all the user and check full control. Press Apply and we'll adjust the permissions for the folder and subfolders and files.

  Eric

  ADK

• external loading of several swf files

  I am trying to load several swf files in my flash project. I have it where it will charge but when I write the code for others it still load them. Here is my code

  Stop();

  Btn1.addEventListener (MouseEvent.Click, f);

  var loader_mc: Loader = new Loader();

  var urlRequest: URLRequest = new URLRequest("swf/graphics.swf");

  function f (e: Event) {}

  loader_mc. Load (urlRequest);

  addChild (loader_mc);

  }

  logos.addEventListener (MouseEvent.CLICK, g);

  var myloader_mc: Loader = new Loader();

  var myurlRequest: URLRequest = new URLRequest("swf/logos.swf");

  function g (e: Event) {}

  loader_mc. Load (urlRequest);

  addChild (loader_mc);

  }

  brochures.addEventListener (MouseEvent.CLICK, h);

  var myotherloader_mc: Loader = new Loader();

  ("var myotherurlRequest: URLRequest = new URLRequest("swf/BROCHURES/brochures.swf ");

  h function (e: Event) {}

  loader_mc. Load (urlRequest);

  addChild (loader_mc);

  }

  the logos.swf and brochures.swf code always loads the graphics.swf. How can I fix?

  While you seem to be creating new loaders, you do not use them.  The functions use the same lines of loading...

  loader_mc. Load (urlRequest);

  addChild (loader_mc);

• Loading of local swf files with actionscript on air for iOS

  I apologize if this seems like it has already been asked, but I'm not sure that having understood the answer, not on the Adobe site, or elsehwere.

  I am developing an app for iOS, targeting the last 3.9 SDK

  I have a main swf file that loads the local swf files. These local swf files have code actionscript in them. I use Flash Professional CS6.

  I publish the application successfully and everything's fine. When I start the app on the iPad, is the main swf and all is well. When I click on the button that loads the local SWF files, nothing happens. They are not loaded.

  It seems that this has been answered, but I'm losing my mind. I don't know what the problem is. I know that, in version 3.9 Air, it is now possible to load local SWF files are actionscript.

  Air for the Android version works perfectly with these local files loaded and unloaded like a charm.

  Any help would be greatly appreciated

  from the air, 3.6, you can load swf with actionscript and that run actionscript.  before 3.6 air that was not allowed (without additional work).

  but your charger must provide a loadercontext object that uses the current applicationdomain:

  var lc:LoaderContext = new LoaderContext(false,ApplicationDomain.currentDomain,null);

  yourloader. Load (yourexternalswf.swf, LC);

• Load the local swf file with flash

  Dear my friends

  I have a big problem with as3. I have two .swf file: Index.swf - 1 and 2 - page1.swf. Index file has a frame with the following measures:

  var loader_mc:Loader = new Loader();

  addChild (loader_mc) ;// add the loader to the display list
  loader_mc. Load ("d:\\page1.swf"));// loads the file

  I have download the Index file in my site and it can't load page1.swf.

  Please help me.

  Best regards

  For that you must have a web server if you are using Windows you can have IIS or you can choose a free like Apache

  You start the Web server and place the swf file in the wwwroot directory, then you will be able to access using

  http:// page1.swf

• Published .htm does not open the SWF file with the exception of the published folder

  Using Captivate 2: my stand-alone files work fine for all users, no matter where I place them on the network, but I just published as SWF with export HTM and the HTM opens only the skin and SWF files if I open it in the folder where it was published. If I copy the files (all three) to another location, the HTM opens empty. I do not see a path when I discover the HTM in Notepad, so I can't understand why the browser window is empty. Anyone have any ideas? I have attached the .htm code (I think).

  I should have waited a little more forward: the standard.js file must move with the other files, as it is called in the .htm. If I had published in a clean folder I would have saw that immediately. Sorry...

• Try to get _totalframes several swf files

  Hello people,
  
  I have a list of swf files and I need to know the quantity of frames of each of them. I tried the following:
  
  1. I created an xml file called "data.xml" (an example with 5 files - lesson1.swf, lesson2.swf, lesson3.swf, lesson4.swf and lesson5.swf):
  <? XML version = "1.0" encoding = "iso-8859-1? >
  < course >
  < id lesson = "1" > < Lesson1 name > < / name > < / lesson >
  < id lesson = "2" > < lesson 2 name > < / name > < / lesson >
  < id lesson = "3" > < Lesson3 name > < / name > < / lesson >
  < id lesson = "4" > < lesson4 name > < / name > < / lesson >
  < id lesson = "5" > < name > lesson5 < / name > < / lesson >
  < / course >
  
  2. I wrote this script on Flash:
  
  System.useCodepage = true;
  var MyXML:XML = new XML();
  MyXML.ignoreWhite = true;
  
  MyXML.onLoad = {function ($success)}
  {if ($Success)}
  for ($i = 0; $i < MyXML.firstChild.childNodes.length; $i ++) {}
  lessonloaded = MyXML.firstChild.childNodes [$i].firstChild.firstChild.nodeValue;
  loadMovieNum (lessonloaded + ".swf", 10); lesson n .swf on _level10 charges
  _level10. Stop();
  trace (_level10._totalframes);
  unloadMovieNum (10);
  }
  } else {}
  trace ($Success);
  trace ("Error!");
  }
  }
  MyXML.load ("data.xml");
  
  The trace (_level10._totalframes) of undefined five times results command. So I tried the onEnterFrame function, believing that, after some loops, Flash would recognize the amount of frames of the lesson n .swf file loaded on _level10:
  
  for ($i = 0; $i < MyXML.firstChild.childNodes.length; $i ++) {}
  lessonloaded = MyXML.firstChild.childNodes [$i].firstChild.firstChild.nodeValue;
  loadMovieNum (lessonloaded + ".swf", 10);
  _level10. Stop();
  onEnterFrame = function() {}
  If (_level10._totalframes! = undefined) {}
  trace (_level10._totalframes);
  unloadMovieNum (10);
  delete this.onEnterFrame;
  }
  }
  }
  
  But, onEnterFrame function is called only once, after the loading of lesson 5.swf. So I get the amount of images of the last file only.
  
  Now, I am a bit lost... I don't know what to do to improve this script, and I wonder if there isn't a better way to get the _totalframes of a list of swf files...
  
  Any suggestions will be much appreciated!
  
  Thanks in advance,
  Zenho

  Woo - hoo! Now I got it! The problem is where was called loadClip... I moved it just below the loop for, and now it works!

• Cannot open the PDM file with excel 2016

  Hey guys,.

  I have Office 2016, LV 2015 and (I checked my "TDM Excel Add-in" file) the Excel Add-in 2015 of CT.

  I have attached a picture of what I get when I try to open the PDM file with excel.

  So, I found something strange. I checked active supplements under the excel options and the TDM Excel Add-in is listed as inactive (and is called a COM-add-in). I tried to activate it, by checking the box (see the second picture), but that does not change. Interesting is the last line of my second attached photo:

  Translated it means: ' loading behavior: a runtime error occurred when trying to load this Add-In.

  I have 10-64 bit operating system like windows.

  Someone at - it a solution?

  Kind regards

  Slev1n

  
  

• Cannot create a data file with a size of less than 1000 M

  Hello

  I have a problem that I can't solve. Whenever I try to create a DATA file with a size of less than 1000 MB, I get an ORA-03214

  Example:

  Select * from version of v$.

  Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production

  PL/SQL Release 11.2.0.4.0 - Production

  "CORE 11.2.0.4.0 Production."

  AMT for IBM/AIX RISC System/6000: Version 11.2.0.4.0 - Production

  NLSRTL Version 11.2.0.4.0 - Production

  -----

  ALTER TABLESPACE "IDX_PRETR1".

  ADD DATAFILE ' / appli/oracle/PR3/data4/TEST.dbf'

  SIZE 500 M;

  XXIX error on line 1 of the command:

  ALTER TABLESPACE "IDX_PRETR1".

  ADD DATAFILE ' / appli/oracle/PR3/data4/TEST.dbf'

  SIZE 500M

  Error report:

  SQL error: ORA-03214: the file size is less than the minimum required

  03214 00000 - "specified file size is smaller than the minimum required.

  * Cause: Specified for add/resize datafile/tempfile file size does not work

  provide the minimum required of an allocation unit.

  * Action: Increase the size of the file specification

  Thanks for the help and sorry for my English

  Hello

  The answer may lie in the INITIAL_EXTENT configuration in your space of tables, check DBA_tablespaces view.

  Also, try to use autoextend on and maxsize in your file data creation but better try with the highest value during the action of the mentioned error.

  Kind regards

  Juan M

• Cannot save a PNG file with alpha channel transparency format

  I try to send a PNG file with transparency channel alpha on my Zenfolio web page. It is a custom application of copyright law that I do.  When I save the file, cs5, and I select Save in PNG, in the window, I get a message error/alert that says "the file should be saved as a copy with this application.  I'm not allowed to select the Alpha channel option.

  I think that I have a setting in CS5 that is making this happen, but I'm not smart enough to understand.

  What happens when I have when even save it and upload this file to my Zenfolio website is copyright logo has a cloud of sorts with it. It's the rest of the House generated page which should be, but is not transparent.

  PNG does not support alpha channels, only one channel of transparency.

  Just make the image with transparency and save in PNG.

• With the help of a ClassLoader to load several SWF files?

  Hello community,
  
  Pulling my hair out on this one. I want to use a single charger (from the class Loader) to, in order, load a SWF to a single movieclip on the stage. I have a charger that I want to load external files: 'peel0.swf', 'peel1.swf',..., 'peel9.swf' in 10 corresponding clips (that already exist on my scene): 'peel0_mc', 'peel1_mc',..., 'peel9_mc '.
  
  The problem with my code is that it does not load, but the last peel. Everything seems to be cranking away as you like, until I have look at the contents of my peeling - only the 'peel9_mc' Gets the external file "peel9.swf" in charge. When I slow down things with 'Simulate download' I see the 0-8 "peelX_mc" loaded with the correct SWF but when the 'loop' moves to the next line, it disappears from the mc. It's as if the *.addChild method does not stick.
  
  Any input would be greatly appreciated,
  
  -john
  
  

  VarioPegged!

  Yes! It worked like a charm. I do * love * this community.

  I sincerely appreciate your time and efforts to help me.

  Kind regards

  -john

• Cannot select several folders & files on external hard drive

  Hello
  On my main hard drive to C: and my DVD, I am able to select several files and folders by practice
  SHIFT + left-click. Hovever, on my external hard drive, that it does not work - everything that happens that the next thing that I shift + left click is selected and that the previous is deselected.

  I use Win7 Home Premium (64-bit). My external hard drive is a Freecom 500 GB (there are no exact model No.) USB in NTFS format

  Thank you
  Jetta

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

  Hi Jetta48,

  This can happen if the external drive is affected with virus\malware. An analysis online for the same thing. Follow the link given below for removal of virus\malware tools.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Follow the link below for more information on the selection of multiple files.

  Select multiple files or folders

  http://Windows.Microsoft.com/en-us/Windows7/select-multiple-files-or-folders

  You can also check what is happening with a new user account.

  To create a user account

  1. To open user accounts, click the Start button, select Control Panel, click user accounts and family safety, and then click user accounts.
  2. Click Manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Click create a new account.
  4. Type the name that you want to assign to the user account, click an account type, and then click create an account.

  If the new user account works fine then the old account has been corrupted, you can follow the link given below to fix the corrupted user profile.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot retrieve downloaded VeohWebPlayerSetup file with Unarchiver... How can I fix this problem?

  Hi all.

  To download my videos on Veoh, I had downloaded their web player for Mac. But Unarchiver declares that it cannot extract this program. Opening of the finger on the button control too gives no results. What should I do?

  Thanks in advance.

  Dr. Christophe

  If you mean Veoh 3.0 there is nothing to extract. It comes as a .dmg file. DBL-click on the file and run the package.

  Unless of course you have downloaded version .exe Windows that will not be installed at all.