Cannot open the hyperlink to an email in Outlook

Similar Questions

• cannot read the body of my email in outlook express 6

  02 days now, I try to read the body of my email in outlook express 6, I use Windows XP

  I try a lot of things like write running but not using regsvr32 inetcomm.dll
  I wish you could help us
  Concerning
  Faustina

  Hello

  I've had this problem twice now and have gotten the final solution:
  It's all about your Temp files. To delete them. The best way is to use a software called . He basically cleared your PC but also get rid of Temp files. It is very clean, simple and safe. It just does the job perfectly for me.
  The link is here:
  See you soon.

• Cannot open the document scanned to email

  I have a HP Photosmart 7525 and when you scan a document or photo to email, I can't open it. Box pop up saying Windows cannot open this file, select open with program and none don't.

  Hello people,

  I'm sorry to hear about the problems with scanning to email. I recommend contacting the Cloud service for this specific problem.

  Please see this post by TwoPointOh - Cloud Services of Information.

  I hope it's resolved for you all soon!

  Kind regards

• I am currently using Internet Explorer 8. I can't open the hyperlinks in my Outlook emails and receive the following error message: "this operation has been cancelled due to restrictions on this computer. Please contact your system administrator. » ____

  I use Vista and Internet Explorer 8.  My Outlook emails not let me open the hyperlinks.  I get the same error message other inquisitive got solutions for IE6 and IE7: "operation has been cancelled due to restrictions on this computer.  Please contact your system administrator. »

  The solutions proposed in this forum for the error message are excellent and detailed.  However, they apply to IE6 and IE7, so I'm not able to follow the action steps.

  Can someone tell me how to solve this problem, because I use Internet Explorer 8?

  Thank you.

  Steve

  It is generally a problem of default browser:

  "This operation has been cancelled due to restrictions in effect on this computer."
  You receive an error message when you click a hyperlink in Outlook
  Operation cancelled error when opening a link
  Outlook tips: Tip 540: operation cancelled due to Restrictions

  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• Cannot use the hyperlink in word or outlook

  I get the message below everytime I click on a hyperlink in a word document or email in outlook.

  This operation has been cancelled due to restrictions in effect on this computer. Please contact your system adminastrator

  Do you have google Chrome installed then remove it?

  Hypertext links disabled in Outlook 2003
  Cannot open all hyperlinks. (This operation has been cancelled due to restrictions in effe...

  Restrictions in outlook
  I can't open a link from MS Outlook 2003 due to an error message
  Click on a web link says contact administrator
  Outloook hyperlink problem
  New issue of Outlook
  By clicking on a hyperlink in Office 2007, rejected by the administrator?
  System administraition

  Steve Hebert - MVP Microsoft Internet Explorer

• recover my system. used to install Windows Vista. get the message cannot open the file E:\Sources\Install.wim. Also the code error 0 x 80070002

  So all this started because I tried to clean my computer to give to a friend. I tried refomatting the hard drive, but something was wrong here. After that, when I turn on the computer I get a black screen with message Bootmgr missing. I read a little inside and saw that I could download a Windows Vista recovery disk because my computer did not come with one.
  After that I downloaded and burned the ISO image to a CD, things started looking better. I got to the screen when you select the language and keyboard. Then install windows screen. My options there were 'Install now' and 'repair your computer '. When I try to install, I put in my product key that seems fine. The next message I get is "Windows cannot open the required file E:\Sources\Install.wim. The file does not exist. Make sure all files required for installation are available, and restart the installation. "Error code: 0 x 80070002.
  When I try to repair, he said "select an operating system to repair, and then click Next."
  Operating System: Windows Vista (TM) Home Basic (recovered)
  Partition Size: 34318 MB
  Location: (D :) ACER
  If you do not see your operating system listed, click on load drivers to load the drivers for your hard drives. I try to select Windows Vista retrieved and clicked Next, but what is said "this version of system recovery options is not compatible with the version of windows that you want to repair" or get a recovery of tools such as repair system, System Restore, complete pc windows, tool windows and command promy memory diagnostic restoration. the only problem is he says operatins system: (unknown) unknown local disk...

  Any help would be appreciated. Really want to give my friend a laptop that wont even turn on. Laughing out loud

  Was it Neosmart?

  This isn't an installation disc. It's a record of startup repair!
  You use the repair disk option, not Install.

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11; Acer is in some models Alt + F10 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon. Mick Murphy - Microsoft partner

• Q10 blackBerry download full - cannot open the file

  My previous Blackberry Curve 8330 (using version 4.0 of the software), I had an eSecure app that I downloaded from a text message sent to my phone.  With my new Q10, I "ve done to transfer the data from my old phone again, but the apps has not been transferred.  All lists of contacts, emails, etc. worked well.

  I logged on the site where I can go to request a new message text for the app, but the OS Q10 is not an option, the highest available Blackberry version is 7.0.  When I select 7.0 and receive this new text message on my phone, I open it and the link download, but when I click on the downloaded file I get a popup message that says: "Cannot open the file."

  Please notify

  Applications BlackBerry OS7 (and OS4) do not work on OS10. OS7 (and the previous operating system) is based on Java, OS10 is completely different (QNX based). So if the seller does not level its app to OS10, there is nothing you can do.

• BlackBerry Smartphones connected to the Internet, but cannot open the web browser, facebook...

  My Blackberry Bold 9900 connects to internet with wi - fi and 3 G/edge connection (w / caps) and receive emails, but cannot open the web browser, facebook, twitter, bbm, app world... for the last two days (I think that I have improved some applications). Everyone knows the same?
  Can someone help me pls? Thank you!!

  OK, at least you get the signal necessary for many applications work.

  Please remove your battery while your phone is on, and then replace it.

  Let us know if that helps you.

• Cannot open jpeg images in my email. They are deformed with a grey block.

  Cannot open jpeg images in my email.  They are deformed with a grey block. I see only a tiny portion of the upper part of the image.  Tried to save the image on my disk hard but could not be opened.  For example: If the size of the image, I'm saving about 800 K, I'll save the image (that I can not open) in a folder on my hard drive.  When I check the properties of the image, it is much smaller, around 8 or 9 K.  Spent an hour on the phone with HP, but couldn't find a solution.  When starting my computer in Mode without fail and go to my email account, I can see the full image.  Would appreciate suggestions in deca a system recovery.  Thank you

  Larry D.

  Hi Larry,

  Cannot open any jpeg full image. I'll help you with this problem.

  1. have you made changes on the computer recently?

  2. what security software is installed on the computer?

  3. are you able to open any image with other file extensions?

  4. what application you use to open the images?

  As you can see the full image in safe mode, let's try the following steps.

  Method 1.

  A clean boot to test if any element of service or third party application startup is causing this issue.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:http://support.microsoft.com/kb/929135

  Note: Once you have finished troubleshooting, follow step 3 in the article to start on normal startup.

  Method 2.

  You can also try disabling the firewall and check if that helps.

  Turn the firewall on or off Windows: http://windows.microsoft.com/en-US/windows7/Turn-Windows-Firewall-on-or-off

  Note: You should not turn off Windows Firewall unless you have another firewall enabled. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.

  Method 3.

  You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  I hope this helps.

• Cannot open the e-mail from Adobe Acrobat application

  First of all, let me say that was exceptionally difficult to find somewhere I might actually post. I don't think it should be that hard, either I've missed the easy way. Eitherway, let me know if this is in the wrong place, because I am posting this now that I finally found somewhere I can actually post.

  I use adobe acrobat X standard v10.1.2 (I think, should be fully updated without worrying) on windows 7 pro - x 32. I can open a pdf file and then click on the envelope to send by e-mail, and it brings up a side panel. When I tell the email attachment, it seems that if she does something and then disappears without notice. I tried as admin and same result, I troubleshoot compatibility and it came with xp sp2 and when I did, it says "cannot open the e-mail software" and when I run in administrator mode and xp mode it says always 'impossible to open the email software' on other computers it would be perfectly fine without a hitch, even if they are 64-bit could this be the cause? Also already tried to reinstall Acrobat and it did not help and tried to do a "repair" and that did not help either. So I'm really at a lost, unable to find any documentation on this error if were just troubleshooting using my typical procedures. I hope someone can help out me.

  Thank you

  HannersR

  You are most likely in a problem with Win7 email client number. I'm not sure about AAX, but for older versions, the e-mail was through the interface MAPI Ms. Most of the time you simply make sure that your default e-mail client is specified in the default Windows programs. For some clients, you must enable their ability to use MAPI.

  Not sure if this will help, but it is typically a Windows problem to solve because of the way Acrobat trys to interact with mail.

• Cannot open the application "Mail" because PowerPC applications are no longer supported

  I work on a MacBook Pro mid 2012

  Intel Core i5 2.5 GHz

  OS X El Capitan 10.11.6

  The Mail app suddenly quit and when I tried to resume, I got this message

  "Cannot open the application"Mail"because the PowerPC applications are no longer supported."

  This also happens with the "Maps" app

  All Mac software are up to date, but "Mail" has been working fine since my last update that was awhile ago.

  I am confused to say the least. Suggestions? Thank you!

  If you do a Get Info (command - I) on Mail and Maps applications, what version numbers do you see?

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• ID but cannot open the phone

  معرف ولكن لا يمكن فتح الهاتف

  I know that ID but cannot open the phone

• Cannot open the application "Adobe Installer" because PowerPC applications are no longer supported.

  I'm trying to install Adobe Creative Suite 2 Premium on my MacBook Pro (OS X El Capitan).  When I click on the install icon, I get the following message: cannot open the application "Adobe Installer" because PowerPC applications are no longer supported.  Can I do to solve this problem?

  Try to install mode without failure. Hold the SHIFT key while rebooting.

• Satellite A300-M01 - fingerprint - cannot open the sensor with Win XP

  Hello

  I got a Satellite A300-M01 with Windows Vista but my my software is very slow, so I'm a Windows XP Installer to put in. After that, the fingerprint reader no longer works the registration of fingerprints he'll only say 'Cannot open the sensor' and if you access the service of this device it says "specified device instance handle does not match this device."

  I already downloaded the driver for this sensor of isd.toshiba.com.au, but after the installation, the problem is the same. Any info is much appreciated.

  Thank you.

  Ray

  Hello!

  Have you installed the tools and all the other drivers of Toshiba?

  Search on the Toshiba site for a BIOS update.
  Maybe this can solve the problem.

  Good bye

• 9.1 Safari cannot open the page after el capitan 10.11.4 updated updated

  have an imac (retina 5 k, 27 ", end of 2014)

  4 GHz of processor intel core i7

  8 GB 1600 Mhz DDR3

  1 TB of flash storage

  running Safari 9.1 (11601.5.17.1)

  Safari opens but does not open the page - get - Safari cannot open the page - safari can't open the page because the server dropped the connection unexpectedly.

  Journal of the console after repeated attempts-

  

  appreciated all help to solve them.

  Go step by step and test.

  1. turn off the power to the router. Unplug it from the wall. Wait a while.

  Plug it in, back to the wall. Turn on the router. Wait for all lights are light up properly. It will take a while.

  Restart the computer.

  Boot mode safe.

  https://support.Apple.com/kb/PH18760?locale=en_US

  2 remove Caches.db

  Close all windows and close all applications.

  Hold down the 'option' key, then click on the "Go" menu in the Finder menu bar.

  Select 'Library' in the menu dropdown.

  Library > Caches > com.apple.Safari > Caches.db

  Right-click on the Caches.db file and select "move to trash".

  Close the windows.

  Restart and restart Safari.

  3 empty Caches

  Safari > Preferences > advanced

  Tick the box "Show develop menu in menu bar."

  Develop menu will appear in the Safari menu bar.

  Click on develop and select 'Empty cache' in the menu dropdown.

  4. remove the Cookies

  Safari > Preferences > privacy > Cookies and other data from the website:

  Click on the button "Details".

  Delete all cookies except those from Apple, your internet service provider and the banks.

  5 Disable Extensions and test them.

  Safari > Preferences > Extensions

  Uncheck 'Enable the Extension' and test.

  Enable the Extensions one by one and test.

  To uninstall any extension, select it and click the "Uninstall" button