Cannot parse after changing routers (MF229)

Similar Questions

• OfficeJet 8500: Cannot parse after upgrade Windows 10

  After the upgrade to 64-bit Windows 10 Pro, I can't scan my OfficeJet 8500 909n.  I get this message:

  "The analysis cannot because another program or computer using the networked HP imaging device. Try again later. »

  I have a / re installed HP Solution Center 5 times.  I restarted routers.  I'm power cycling my PC and the printer several times.

  I can print to this printer from three PC.  I can't get the scan to work as before.  This has been driving me crazy for more than 5 hours.  I'm honestly ready to go back to Windows 7.  The printer is connected via the cable network.

  Can someone please help?

  Thank you.

  Kind regards

  Jim

  Hello

  Thanks for the comments, you can try this alternative software:

  HP extended Scan
  
  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi
  
  Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.
  
  Let us know if it works.

• iCloud cannot connect after changing email on the account of Apple

  I changed the e-mail address on my account Apple ID. Now I can't access iCloud, iTunes or music on my iPad Mini. I have two devices, a MacBook Pro and iPad. I finally got the MacBook Pro works after much tinkering, but the iPad refuses to acknowledge the new e-mail address. Instead, he continues to ask the password on my old email address, and I can't get to all settings where I can change it.

  In the settings of the iPad where it shows iCloud in the list, it always shows the old email address. Because the new password does not match the old email address, I can not connect. I tried turning iCloud market even once tried to re - start the iPad. He removed from my list of devices in the iCloud settings page when you use Safari on the MacBook Pro. Not good. I also can't sign my apple account in music on the iPad either. The iTunes and App Store always show my old email as my Apple ID account too.

  Help someone?

  For the cloud, if settings > iCloud > Sign Out requires your password (i.e. you find my active iPad) and he does not accept it then try: If iCloud asks you the password to your old Apple - Apple Support ID

  To disconnect from the old version of your account for stores, tap your id in settings > iTunes & App Store and then press "Logout" on the context menu, and you can then connect with the updated release of the account.

  For even if using this account for messages, tap your id in settings > Messages > sending & reception and log out and back in and for FaceTime tap your id in settings > FaceTime

• Cannot parse after loading Office 2007

  It seems that the installation of the new version of OFfice 2007, my scanning capabilities have since disappeared.  I think that would be the problem.  I have a HO Officejet 7210 all in one.  I usually use Corel Draw or Corel Paint to scan the acquired scanner still appears as the HP twain but when I try to scan I get the windows Setup window and it calls for an installation disc.  I have DL all the current drivers.  but it can not find the scan.msi file.   Any help is appreciated.  Windows XP Pro

  The problem of not being able to scan after that loading Office 2007 has been addressed through an online chat with an HP technician.  It took 40 minutes.  For the record I have an XP, a Vista and Mac work all through my HP All in One 7210-no has ever had a problem with any impression.  It turns out that the scan.msi file disappeared after Office 2007 installed on the HP > after too long to try as many bugs that didn't work, the tech finally proposed I put in the original installation disc find the scan.msi file and copy it to the folder C/programs/HP and/or the program in C/Hewlett Packard.  That fixed it!  All right.  I do not understand then that when I told him I kept getting the error message was to locate the missing .msi file, it didn't suggest the obvious solution first.  They are paid by the minute?  In any case, it works now, FYI - any any graphics program, CoreDraw, Corel Photopaint, Photoshop Design and Word, I think has a "select him scanner-usually a Twain and then a command image acquisition."  You do not have to go through HP Director, although some of these programs scan to the Director.  The function of chat line, although long was a good immediate response to a problem.

• HP Officejet Pro 8620: Cannot parse after upgrade to Windows 10

  After switching to Windows 10, I found that I could not scan to my computer using a USB connection.  I ran HP print and Scan doctor and he said that everything was OK and I could actually scan a document into my computer using the "scan test" function of the program.  However, the normal scan would not work with the error msg 'connection to computer is lost.  So I uninstalled the current HP printer driver software and downloaded the recommended replacement.  The scan does not always for the same reason.  Still printing HP and Scan doctor said that everything is perfect with the scanner but now when I try to do a 'test' scan I get the message "HP Officejet Pro 8620 is not found".

  This same package worked for many other clients, so I don't feel the driver/software it is, on the contrary, I suspect that the question has something to do with the computer.  I'm always happy to do everything that I can to help if you want.

  I suggest running the tool (SFC.exe) System File Checker. If you do not know how, you can use the following link for instructions: System File Checker: run sfc/scannow & analyze its logs in Windows 10 / 8 / 7.

  Another thing we can do to help isolate the problem is to perform a WebScan.

  I made some screenshots for you that might help, I know that sometimes it is easier when you have a Visual. You will need to get the printers IP address from the front panel of the printer. You can touch the wireless network icon and view in the menu wireless settings. Take the IP address and enter the address of a browser bar.

  In the embedded Web server, click settings

  

  On the left side, click the administrator settings

  

  You will see the following message will appear, click OK

  

  You can now select continue on this site

  

  It may take a few minutes for the next page load. You might even see get a message that says: "Internal system error", if this happens please just refresh the page. (you can tap F5 on the keyboard to refresh)

  

  Once the WebScan is enabled you can click the WebScan tab above and do a scan. Please let me know if it works or not.

• Cannot parse after installation of new Mac OS 10.6.3

  I had no problem with my old OS 10.5 to scan.  The first scan after update 10.6.3 I received the diagnosis, 'Scanner could not be initialized. Scanner not found. "Printer worked fine.  I then reinstalled the CD software HP and now I get diagnosis "failed to open a session on this unit. No scanner found. "Printer still works.  What should I do next?

  I can now scan with OS 10.6.3 after downloading the drivers for the HP customer service > all-in-one printer, HP OfficeJet J4680 > Software and Driver Downloads.  The Apple software update did not work, but this driver is HP.

• Cannot reactivate after changing the motherboard on Windows 7

  Original title: not one thing he, s the next...

  Hi I recently changed my motherboard due to problem with formar with old mother... so now I have to activate windows again, I got my product key but it propmts me re - activate by telephone, even if the number is not working is there anyway I can do this online or another solution?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  or

  Direct activation number: (888) 725-1047

  1-800-936-5700

• Always said "Cannot print" after changing the cartridge twice.

  It is an Officejet Pro 8500 has.  He gave me a message saying "Unable to print" and meant to replace the following depeleted cartridges to resume printing.  I ran the animated illustration which stated that it was the cyan cartridge.  I got a replacement and installed.  He gave me the same message.  I got another cartridge and tried again, even once he gave me the same message.

  I am at a loss.  What should I try then operate?

  Here a link to a document that deals with the error you get on the printer. It will give troubleshooting steps to try to solve the problem it produces. I hope this helps.

  If you reach the end of the document and find that the printer still does not work. Sought to be the replacement of the product.

  If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  HP Technical Support call case form:
  https://h10025.www1.HP.com/ewfrf/wc/phoneInput?cc=us&DLC=en&LC=en&product=5061082

• AIO 810 cannot parse after re - install

  My PC is a Dell Dimension 9100, 4 GB of RAM, XP Pro SP3-500 GB HD.

  I'm extremely frustrated with my 810. For years, he has worked without problem. A few weeks ago, I replaced the C:\ drive with a new drive and reinstalled the 810 since the Dell that accompanies the 810. I think that it's all in a folder called C:\DELL.

  It prints normally and a copy of its Panel 'copy' button but will not scan or copy from the menu screen (or whatever the thing that appears when you double-click on its icon).

  Try to get it to scan or copy computer throws an error screen that explains, in part, "Scan was not seuccessful" and blames me for check cables, recycle, power, etc. No joy.

  I then downloaded new drivers from Dell, still no joy. I reinstalled several times with the same result.

  Someone at - it a fix for this situation? Thanks in advance for any help!

  Terry

  Terry,

  Try the steps below and see what happens.

  First run, delete print jobs to eliminate any print job stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal

  Download the correct drivers or use the diskette from the Dell printer.

  You will find links to the patch/drivers to...

  All-in-One printer, Dell 810 owners thread

  Don't forget the programs anti-virus and firewall will block communications.

  Rick

• Cannot parse after upgrading to Snow Leopard - C4580

  I have the HP all in one single C4580. No problems of printing or scanning up to that I've upgraded to Snow Leopard. I can still print but I can't scan unless I have used Image Capture. The printer does not appear in the window HP all in one device selector. I did set up the wizard again but my home network says that the server has failed and will not recognize the scanner. Anyone with the same problem?

  [title edited for clarity]

  You still have the HP software for 10.5 installed.  It does not play well with 10.6.  Let's remove this way:

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Now run a software update.

  Then, remove and reinstall the printer in System Preferences, Print & Fax.

  You do not have the software now since Snow Leopard as well print & scan drivers built-in. scan from Preview apps or Image Capture. Scan from the front panel of the printer does not work yet.

• After changing Windows 8.1 for Windows 10 my photoshop 6 is not working properly: layers styles cannot be applied to the objects in the layer

  After changing Windows 8.1 for Windows 10 my photoshop 6 working properly: layer styles can be applied to the object in the layer.

  Thanks much for the reply, thank you very much more useful.

  The letter appears to be part of the layer - not an object separate pixelated. One thing you could do is make a layer duplicated, select the letter and make a layer of the mask. Then you could add a style to the copy, and the rest of the initial layer will be hidden.

• HARD does not work after changing the disk partitions recovery media creator

  Hello world

  After installing windoows 8.1 April major upgrade (win 8.1 presents as OEM), and have shrunk C partition to create a data partition "D", "Troubleshooting" option under advanced start menu is no longer available.

  Toshiba Recovery Media Creator does not work, too (it can not find any hard disk recovery partion).
  I got in the OEM recovery partition.
  I am also able to create a recovery using the Windows tool unit.
  You have no idea about it?

  Thank you very much!

  Hello

  Sorry to hear about all this. Unfortunately, you now have a big problem. I don't understand why you didn't create support of recovery before you started to change the factory settings, including to change the structure of the partitions of HARD drive.

  Mobile offered with factory settings a structure specific partitions and recovery recorded image is saved on the partition of drive specific and marked with invisible markers. These markers are visible for preinstalled Toshiba recovery media creator tool and when you start the tool can find points of reference and has full access to specific files.

  Unfortunately, after changing the original scores structure Toshiba tool cannot find these markers more and is not able to copy files from recovery media recovery. What you need now is the original recovery disk. Using this disk, you can install original recovery image and after doing this, you will have new factory settings.

  I know it sounds stupid now but you must order the original recovery disk and it can be done on https://backupmedia.toshiba.eu/landing.aspx

  If you have any other questions you are welcome.

• Win 7-64 not start after change of motherboard. Win 7-64 has tried to repair without success. Message is

  Win 7-64 not start after change of motherboard.   Win 7-64 has tried to repair without success Message of Win7 installed "Cannot automatically repair the start" Message from the repair option DVD Win7-64 install is "this version of the Recovery Options is not compatible with this version of Windows".

  If Win 7-64 don't update the hardware changes and this prevents the start.

  Is there a solution for this problem of resettlement and thus destroy all previous program files and configurations?

  Hello

  As you mentioned that you have "hard disk 500 GB (previously there were two HD in the old mobo)" which means the HD is also changed

  Then I suggest to clean install to solve this problem, please follow the link to clean, install the windows

  http://Windows.Microsoft.com/en-us/Windows/installing-reinstalling-Windows#1TC=Windows-7

  Note: data loss caveat:

  Converting a hard disk partition or volume from NTFS to FAT32 requires that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

  Thank you

  Er.Mayank Chadha

  Thanks for your response

  I solved this problem in BIOS Advanced\SATA config\SB SATA config.  as follows

  SATA port 1-4 = AHCI initially

  SATA port 1-4 = new IDE

  SATA port 5-6 = IDE these ports used with DVD, a comic book should be like ports 1-4

  This because I've done a typical mistake of mine.   I did not save the configuration with the entry of FDI

  Good bye

  Huemul

• Service does not start after change of IP address on the server of SRM

  Here is the log.  The IP address has been changed, but I don't know how to take the side of MRS.?

  Journal of VMware Site Recovery Manager, pid = 4064, version = version 1.0.1 build-128004 =, = release, section = 2 option

  Cannot create the writer console

  Value flush dir "C:\Documents and Settings\All Users\Application Data\VMware\VMware Site Recovery Manager\DumpFiles"

  The initialization of the DBManager

  Current working directory: C:\Program VMware Site Recovery Manager\bin

  TaskMax = 10, IoMin = 1, IoMax = 21

  Try DrExternalRecoveryApi

  Plugin path 0: dr-external-recovery - api dll

  Absolute path of the plugin 0: C:\Program VMware Site Recovery Manager\bin\dr-external-recovery-api.dll

  Try RecoverySecondary

  Plugin path 1: dr-secondary - recovery.dll

  Absolute path of the plugin 1: C:\Program VMware Site Recovery Manager\bin\dr-secondary-recovery.dll

  Try SanProvider

  Plugin path 2: dr - san - provider.dll

  Absolute path of the plugin 2: C:\Program VMware Site Recovery Manager\bin\dr-san-provider.dll

  Try TestProvider

  Plugin 3 path: dr-test - provider.dll

  Absolute path of the plugin 3: C:\Program VMware Site Recovery Manager\bin\dr-test-provider.dll

  DrExtApi Instance of Service is initialized.

  Plugin has started.

  'SanProvider' provider has MoRef 'dr.primary.SanReplicationProvider:PrimarySanProvider '.

  Registered provider 'SanProvider '.

  'SanProvider' provider has MoRef 'dr.secondary.SanReplicationProvider:SecondarySanProvider '.

  Registered provider 'SanProvider '.

  Plugin has started.

  ' Provider 'TestProvider' has MoRef ' Dr. PrimaryTestProvider:primary - test provider.

  Registered provider 'TestProvider '.

  ' Provider 'TestProvider' has MoRef ' Dr. SecondaryTestProvider:secondary - test provider.

  Registered provider 'TestProvider '.

  Plugin has started.

  LocalSite already installed - good!

  Vmacore::InitSSL: doVersionCheck = true, handshakeTimeoutUs = 120000000

  VC connection: connection as the user "administrator."

  VC connection: logged in session F5EDC747-1344-4F98-82FB-038BB9D42933

  The specification of proxy for extension com.vmware.vcDr points to 172.20.0.168, not to this host

  Check with the local VC server is not valid

  Initialization of service content: unexpected exception 'class Vmacore::Exception' record with the local VC server is not valid

  Application error: check with local VC server is not valid. Closing...

  Unable to send the request. A new attempt. Error: class Vmacore::CanceledException (operation has been cancelled)

  VMware-Dr. service stopped

  Z OS

  I tried this on my own server and that you couldn't make it work.  I ended up just reinstall SRM, keeping the same database - NBD since most of the settings are there anyway.  Later, I came across a blog (which I can't find now) that said that VMware supports only a reinstall after changing the IP address.

• inspect element - how to save the report after change

  Hello
  
  When I create an interactive report and apply "leap control" option it interrupts the report according to the requirements of the standard with a button (+/-sign) on top for show/hide selection... I need to show the report with "Control Break", but don't want to show (option button at the top + /)
  
  When I inspected the element (using internet explorer) and deleted the text and gif file... the report displayed exactly how I wanted it...
  
  My question is how to save this report after making the changes in HTML format (with the help of inspect option element)... I did tried to register under default report, but the report got refreshed and +/-sign came back...
  
  Please advice

  Hello

  When you look at the page source and modify it, it only affects your active HTML document.
  You cannot save those changes to Apex.

  You must use JavaScript and example dynamic action to change HTML each time when the report is rendered or refreshed.

  Kind regards
  Jari