Cannot perform the recovery of the space and another Question

Similar Questions

• Adding a RAID card to help speed up the export (and another question reader) in first Pro CC

  First of all, I read the Page Tweakers export section because that is my main concern is. First my questions, then the background and my current and proposed configurations:

  Question 1: Adding a hardware RAID controller, for example an LSI MegaRAID will sufficiently remove the burden of parity management CPU on my RAID 5 software that the CPU will jump of joy and export faster?

  Question 2: If true for above, then compare thoughts on adding smaller SSD for either a RAID 0 or less two RAID 0 volume volume complete HDD RAID 5. In other words, I think the purchase of four Samsung 850 Pro 128 GB SSD to put in a four disk volume to handle everything (projects/media, media, previews, export cache), or split it into two volumes of two disks of each and divide the tasks, or keep the idea of volume four disc and previews and exports on my drive HARD RAID 5 array.

  The 850 are valued at SEQ write: 550 / 470 MB/s so I could get around 2000 / 1500 MB/s read/write to a disk four RAID 0 or 1/2 who, if I divided in two volumes to minimize the volume of read/write at the same time, if it really matters with these SSD?

  The Tweaker page made some comments. A split is carried out the tasks between different drives, rather than a large effective RAID can really slow things down. Because SSDS are much faster than a single HARD disk, I think its more accurate than so I'm leaning towards the configuration of four discs put OS & programs on the C drive, media & projects on media on SSD (2 disks RAID 0) Cache and D (HDD RAID 5), file exchange & Previews & export on 2nd SSD RAID 0 (or combine the two RAID 0 and their functions).

  Just trying to get a point of view here, since I have not bought anything yet. Any experience/stories, I would be grateful.

  My current setup of training:

  My D drive is a software RAID 5 consisting of four 1 TB Western Digital RE4 (RED) 7200 RPM hard drives with CrystalDiskMark SEQ read/write of 339 / 252 MB/s.

  The C drive is 500 GB SSD (Samsung 840 (not Pro) and fact 531 / 330 MB/s.) My OS, Program Files and Page file are on C and media data/files/projects, etc. that are all about the RAID drive.

  Problem:

  Current configuration allows for smooth installation, just export seems slow, usually taking between two and two and a half times the video length to export. Thus, a 10 minute video takes 20-30 minutes for export. 15 minute video can take 30-40 minutes to export. The first 10% of the export of re-encoding takes less than a minute (seems fast), but it becomes slower when the final 10 or 20 percent may hang for several minutes as my system is running out of steam. So, where's the waste?

  I activated the hardware acceleration (because the GPU hack my GPU is not listed) and it can break through to 25% use a few times and eat up to 600 MB of VRAM (I have 2 GB of VRAM), otherwise it is slowed down export set. The CPU can boost at 50%, but it seems either too busy.

  Our calendar is simple with two video and two audio streams (a little music and especially the voices), with simple transitions (jump cuts or cross dissolves). Sometimes, we fast correct color, so that could use the GPU? Also, given that we are filming in 1080 P 60 p and 1080 export 29.97 FPS, I think who is scaling and using the GPU. I know that without the GPU, it takes much longer. I excluded buy a faster GPU because it doesn't seem to be breaking a sweat. I just need to know if my system is a bottleneck at the level of the disk hard because I am using software RAID and my disks are slow and hardware RAID will considerably reduce the processor load so it can export more quickly.

  Our files are not huge in nature. Most of our clips are several MBs each. Total files in the project are between 5 GB and 10 GB for each video with Windows Media File export being 500 MB to 1.2 GB on average. Look using Panasonic Camcorders, so the original files are AVCHD, I think (.) MTS files?).

  Considerations:

  1. I think to buy (and future proofing) a LSI Logic MegaRAID 9361-8i is 12 Gb/s SAS and SATA (because some SSD current can exceed the standard 6 Gbps).

  2. I will not replace my current HDD RAID 5 as not in my budget to spend 6 or more large SSD. These discs are more important to me for temporary storage because I delete files saved once. I don't mind a few smaller SSD inexpensive if they can make a significant difference for editing and export.

  I can only guess my RAID HDD is slow but the CPU is burdened by parity. I guess running RAID 10 would not really help.

  My configuration:

  my configuration:

  CPU - CPU i7 - 3930K @4.5 GHz

  RAM - G.SKILL Ripjaws Z Series 32 GB (4 x 8 GB) DDR3 2133 @2000

  Motherboard - ASUS P9X79 WS LGA 2011

  GPU - Gigabyte GeForce GTX 660 OC 2 GB (performed the hack of compatibility list to activate hardware acceleration).

  Drive C - 500 GB Samsung SSD (programs and Windows 7 Pro 64-bit) 840.

  D drive - four 1 TB WD RE4 enterprise hard drives 7200 rpm in RAID 5 software

  Box - Cooler Master HAF X

  CPU fan - Cooler Master Hyper 212 EVO with 120 mm fan

  Power - series Pro Corsair AX 850 watts 80 Plus Gold

  Optical drive - Pioneer BDR - 208DBK

  Thanks in advance,

  Eric

  OK, after overload of information on everything I tried (free), which might be my answer here. I went from codecs to export. When you use Windows Media File, Premiere Pro seems chugging along much slower than when you use the h.264 (not h.264 Blu - Ray). I don't know if it's because Microsoft has found a way to break it or what. But I'm the CPU usage of 70-85% on the 2 Pass of 2 as well as the use of the memory of 40% (or 12 GB). It exported in 14 minutes. Woo - hoo. I then did a similar test using Windows Media File. It took 31 minutes to export. The CPU has spent much of his time in the 30%, especially down in the 1930s mid-1940s with spike for memory usage was only 24% to 35% and 50%. Since then, I've read how h.264 codec is 'plu' for online files. It compresses better with less compression artifacts. He seems better, etc. Well, they both seemed on the same thing for me. I play both on my TV 70 "before I could comment further. In the future, I will consider a RAID controller and upgrade the HDDs to SSDS.

• Cannot perform the iTunes update

  Hello
  Try to update iTunes, I received the message (attached, in German):

  "There is a problem with the Windows Installer Package. As a result, cannot perform the update of iTunes. Contact the technical support. »

  What can I do?

  Thanks in advance for the help.

  Best regards, Alpe1

  Try to repair the Apple Software Update of the programs and features Control Panel, and then reinstall iTunes.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  If the problem persists and you have a 64-bit system try for the old version of video cards which is a 64-bit Installer for most of the 32-bit code, similar to all 64 bit iTunes up to 12,1 versions.

  TT2

• Cannot open a file error where zip is a "compressed (zipped) folders error". Windows cannot perform the extraction.

  Original title: loading with a password required

  I'm trying to open a zip via windows 7.  Same error occurs on windows xp.  There is a "compressed (zipped) folders error" error  Windows cannot perform the extraction.  The destination file could not be created.

  I recently got 8 deleted window and window 7 set in... I've never had a problem before

  Hello

  1. Using default Windows 7 application or any other 3rd party application?
  2. What type of file you are trying to open?
  3. You try to extract the zipped file documents? If so where are you trying to save?

  I suggest you try these methods and check the status of the issue.

  Method 1

  Try using Windows to extract the zipped files

  http://Windows.Microsoft.com/en-us/Windows7/compress-and-uncompress-files-ZIP-files

  Method 2
  Perform the check and the boot if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

• Cannot perform the operation while the host belongs to a Windows domain.

  Hello

  I'm trying to change recording alter DNS for a host of esx5.1 via vCenter but the following error;

  Cannot perform the operation while the host belongs to a Windows domain.

  The host is joined to the domain, but has a static IP configuration. I prefer to change registration without disrupting the VM on the host.

  Any advice would be appreciated

  Thank you

  M

  FYI, I got this problem by leaving the field, change the DNS settings, and then join the domain.

• Cocomputer cannot find the printer and I do not have a disk for it

  Original title: printer SUPPORT

  my computer cannot find the printer and I do not have a disk for it

  Then, download and install the appropriate drivers on the printer manufacturer's support web site.

• Partition question - what would be the best way to increase its space and take part of the space from another partition

  Hello, I have my 500 GB SATA broken down into 3 partitions. Vista and 2 others. The problem is the process of using Partition Magic, Vista has been given only 30 GB, now its operation with 1-2 GB of free space. I want to know what would be the best way to increase its space and take part of the space from another partition, but I don't want to have to reinstall or do I want to lose all the data like photos, browser, documents and news ect.

  -Thank you

   

  You can read more details on "How to move from one partition to the other sapce without loss of data.

• I have published my muse built Business Catalyst site and all from the 'Site in the web browser view' function in the program of the Muse does not work. Screen comes up with a message that it cannot locate the page and suggests I check the ip address.

  I recently published my muse built the Business Catalyst site for preview and all from the 'Site in the web browser view' function in the program of the Muse does not work. Screen comes up with a message that it cannot locate the page and suggests I check the ip address.

  Hello Jimw93000314,

  Are you preview site in the edge browser? When you preview the page in the browser Muse create a local server to give you the preview in the browser. With the edge browser, there was a reported issue to access the local server.

  Please click the link below that shows the steps to enable the browser to edge.

  http://StackOverflow.com/questions/30334289/cant-open-localhost-in-Microsoft-edge-project-spartiate-dans-Windows-10-APER cu

  I'm sure this will help.

  Kind regards

  Vivek

• good when I have several pictures im by clicking between the spaces and the 2Installez them but theres a lot so I was wondering if there is a way to select and make snap toghter I looked online but no help

  good when I have several pictures im by clicking between the spaces and the 2Installez them but theres a lot so I was wondering if there is a way to select and make snap toghter I looked online but no help

  Yes, you can select a group of items in the project Panel, use of the PLC to the sequence option.

  Neil

• I want to cut out spaces (bottom) of a ramp, so when I move the ramp to another location, you will be able to see through the cutting of the spaces and see the new view behind the railing

  I want to cut out spaces (bottom) of a ramp, so when I move the ramp to another location, you will be able to see through the cutting of the spaces and see the new view behind the railing

  marvwfactor

  What version of Premiere Elements and on what operating system works - it?

  Video or?

  Waiting for more information, you can apply ChromaKey (an effect of overlay of the effects of the program) to convert the solid color background areas in transparency. The success will depend on the nature of the solid color and how his strong colorrelates to the rest of the colors in the image.

  Please review and consider and provide more information, so that we can give you an answer with substance.

  Thank you.

  RTA

• Hi all, impossible to download the photos out of Lightroom 5 - I get a ' cannot read the message ' and 496 of the code ".". "  Help, please!

  Hi all, impossible to download the photos out of Lightroom 5 - I get a ' cannot read the message ' and 496 of the code ".". "  I previously used the crd of memory and it works ok.  It also displays images must be downloaded but just let me download them.  This is the message I received:

  The following files were not imported because they could not be read. (496)

  So what I did is launching a new catalog that then wiped out all the records and traces of my previous photos!

  You talk of out of the frying pan and into the fire!  Can someone help me with this?  I have an important project to present - I'm Freelancer and looking quite the fool.

  E.

  Your old catalog is still there, use the file-> open the recent item

  The error "cannot be read" indicates that the folder where your photos are to be copied in has no WRITE permission. Change your permissions on this folder.

• Error #3200: Cannot perform the operation on the window closed.

  Hello

  I am trying to open a new window in an extension of CS, but when the test inside the first as an Illustrator, it gives me the error

  Error #3200: Cannot perform the operation on the window closed.

  When I test as a stand-alone desktop application, it works very well.

  I tried it with a window pane mxml, as well as with the code, such as:

  var newWindow:Window = new Window()

  newWindow.title = "new window";

  newWindow.width = 200;

  newWindow.height = 200;

  newWindow.open (true);

  I use a WindowedApplication.

  Flex 3.5

  2.7 AIR

  Flash Builder 4.5 (do not use the Extension Builder)

  Thank you!

  Jeff.

  I'm sorry. I answered from memory. I remembered a little trouble. You did, but you must set the type.

  Here's how:

  victory: MyCustomWindowType = new MyCustomWindowType;

  win.showStatusBar = false;

  Win.type = CSXSWindowType.MODAL_DIALOG;

  Win.Open ();

  You probably want to create a component based on the window.

  In addition, you must use CSXSWindowedApplication. It is possible that it took for this...

• Remove the spaces and special characters to a form field

  Hello

  I am tragically new to all this, but I'm trying to create a form in Adobe Acrobat 9.  I am trying to use a custom script Format to make entries in a form field and automatically remove the spaces and special characters (hyphens specifically).  For example, if a user 'RAN - 99 06' entries I want to change it to "RAN9906."  I found this script that does not allow users to input special characters

  If (! event.willCommit) {}

  
  Event.change = event.change.replace (/ [------$# ~ %------*------*------^-------------(\)------+=------[\]------{\}; \ "\ <>\ \?"]) \ | \\\ !] /g, "");

  }

  And it's OK, but I can't understand how to prohibit the spaces.  In addition, the perference would be a script to allow users to enter data as they wish, but to clean after leaving the text field.

  Thanks in advance!

  Yes, there are a few changes during the passage of the code of the event in the sequence of keys to the Validate event.

  First of all, you need not try the willCommit. In fact, when the sequence of events of field reached the Validate event, the field is already committed. The Validate event does not therefore the property of willCommit.

  Secondly, in the Validate event, you work on the event.value and either event.change. Thus, you will replace accordingly.

  And who should actually do.

  I hope this can help.

  Max Wyss.

• Remove the spaces and characters not a calculated field standard

  Hello

  I am fairy new forms Adobe script, but I managed to do that day. I am currently working on a form that we send to the suppliers to implement in our systems.

  One of the fields is called "Name of organization", which has a custom format script that modifies the text entered in uppercase in the field output:

  Event.Value = event.value.toUpperCase ();

  I have a hidden field "Own name branch" which is a code of calculation organistion which allows us to identify the organization within our systems (which can use letters). I need 'Own organization name' to be a calculation of "Name of organization" with all the spaces and non-standard characters deleted (", ([]) @$' &... etc").

  Could someone help me with this?

  Thanks in advance

  Chris

  This should do the trick:

  Event.Value = this.getField ("Organization Name").valueAsString.replace(/[\W,_]/g,"" ");

• a pc that is sharing the printer and another pc does not accept the same network printer on xp pro sp3

  a pc that is sharing the printer and another pc does not accept the same network printer on xp pro sp3
  What is the solution?

  Check out these links

  http://TechNet.Microsoft.com/en-us/library/bb457001.aspx

  http://UIs.Georgetown.edu/software/documentation/WinXP/WinXP.network.printer.html