Cannot perform the upgrade on the spot. Needs winxpCD with SP3 slipstreamed.
Original title: REINSTALL required W - XP, Original CD SP1, SP3
I am trying to reinstall my windows xp operating system to repair errors with my laptop, I bought in 2004 and when I insert the disc indicates that the disk of Windows XP is SP1 and I need the Windows XP SP3. How can I install SP3 while my original CD's with SP3..? Can I install SP1 and then to download SP3, now that my system is installed with SP3 to date. OR can I do a CD of SP3, which is already in my system, if so where can I find the SP3 files. My system freezes too and sleeves to the top; I have not k now what to do. It is Compaq Presario R3000 Intel P4 3.0 Ghz, 80 GB HDD with ATI graphics card,
512,00 MB of memory.
Please help. Cordially. MEERA
You can just go place of origin of the manufacturer of the computer.
given that it is hp, then go to hp.com and look for your computer model number. HP will then give you a number of Web pages on your computer, including free patches, patches, downloads, software and fyi.
in any case, if you format the hard drive and reinstall xp sp1, then you should immediately go to hp and install new updates for your computer.
However, my suggestion at the moment is to reinstall sp1 at this time.
Although I don't know all the details on the problems you encounter, there are some steps to take to make sure if the reinstallation of the OS, in fact the problem will be solved.
for example, if you hardware is defective, reinstall it the OS will not overcome this type of problem.
so my first suggestion and the method is to start in safe mode and see if windows works well or not in this mode.
Here are the instructions:
If windows safe mode works ok, then you're in luck because this means that the core system files are ok. Therefore, we can launch a clean boot operation to help windows in normal mode to stabilize.
Here are the instructions:
http://pcsmarties.WordPress.com/CleanBoot/
Another method, that you can use to work around the reinstallation of the OS is called "repair installation".
the repair facility will compare the system files on the hard disk for the file system on the xp pro cd.
and if one of the system files on the hard drive is missing or damaged, they will be replaced by those who are genuine CD.
you mentioned that you couldn't do an inplace installation, i.e. repair installation. then we should take a peek on what could be the problem, especially if you have entered the product key for xp pro when that leveling and xp pro is officially activated and authorized by microsoft.com
Another method would be to add the RAM in the system, since 512 is minimal. my suggestion would be to increase my other 512 megs. with low memory can be problematic as well.
Tags: Windows
Similar Questions
-
Cannot perform the iTunes update
Hello
Try to update iTunes, I received the message (attached, in German):"There is a problem with the Windows Installer Package. As a result, cannot perform the update of iTunes. Contact the technical support. »
What can I do?
Thanks in advance for the help.
Try to repair the Apple Software Update of the programs and features Control Panel, and then reinstall iTunes.
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.
Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.
More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.
Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.
If the problem persists and you have a 64-bit system try for the old version of video cards which is a 64-bit Installer for most of the 32-bit code, similar to all 64 bit iTunes up to 12,1 versions.
TT2
-
Original title: loading with a password required
I'm trying to open a zip via windows 7. Same error occurs on windows xp. There is a "compressed (zipped) folders error" error Windows cannot perform the extraction. The destination file could not be created.
I recently got 8 deleted window and window 7 set in... I've never had a problem before
Hello
- Using default Windows 7 application or any other 3rd party application?
- What type of file you are trying to open?
- You try to extract the zipped file documents? If so where are you trying to save?
I suggest you try these methods and check the status of the issue.
Method 1
Try using Windows to extract the zipped files
http://Windows.Microsoft.com/en-us/Windows7/compress-and-uncompress-files-ZIP-files
Method 2
Perform the check and the boot if the problem persists.How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Note:
follow step 7 of section of boot KB929135 to the computer in normal mode. -
Cannot perform the operation while the host belongs to a Windows domain.
Hello
I'm trying to change recording alter DNS for a host of esx5.1 via vCenter but the following error;
Cannot perform the operation while the host belongs to a Windows domain.
The host is joined to the domain, but has a static IP configuration. I prefer to change registration without disrupting the VM on the host.
Any advice would be appreciated
Thank you
M
FYI, I got this problem by leaving the field, change the DNS settings, and then join the domain.
-
Error #3200: Cannot perform the operation on the window closed.
Hello
I am trying to open a new window in an extension of CS, but when the test inside the first as an Illustrator, it gives me the error
Error #3200: Cannot perform the operation on the window closed.
When I test as a stand-alone desktop application, it works very well.
I tried it with a window pane mxml, as well as with the code, such as:
var newWindow:Window = new Window()
newWindow.title = "new window";
newWindow.width = 200;
newWindow.height = 200;
newWindow.open (true);
I use a WindowedApplication.
Flex 3.5
2.7 AIR
Flash Builder 4.5 (do not use the Extension Builder)
Thank you!
Jeff.
I'm sorry. I answered from memory. I remembered a little trouble. You did, but you must set the type.
Here's how:
victory: MyCustomWindowType = new MyCustomWindowType;
win.showStatusBar = false;
Win.type = CSXSWindowType.MODAL_DIALOG;
Win.Open ();
You probably want to create a component based on the window.
In addition, you must use CSXSWindowedApplication. It is possible that it took for this...
-
Hi all
I tried provide access to filter the group in both SSP and thru Maxl command but still get the error below. Any experience of this problem? If Yes, please let me know how you solved this problem.
ERROR - 1051414 - cannot set the role of group with shared services [30:1101:JNDI error] error.
Thanks in advance!
Krishna
Read the support document that I posted the link, prior to changes for openldap ensure you that it is saved.
-
* Original title: "can't find the necessary files" Factory reset problem Windows 8
Hello
So I just bought an ASUS renovated online - zenbook that came pre-installed with Windows 8. There is some unnecessary programs from ASUS on it and the computer worked quite slowly, so I'm trying to do a factory reset, but when I try, I always get the message "Unable to find the necessary files" and then it asks me to insert the installation disk or media, but I don't have one of those. I tried to go to the command prompt and doing reagentc/Enable, but every time I try I get the message "Windows RE image is not found." Then... I don't know what to do and really need help.
Thank you
Hello
I understand the inconvenience caused to you.
To remove unnecessary programs provided by ASUS, you can uninstall programs and features.
Here is the link for more information.
http://Windows.Microsoft.com/en-CA/Windows-8/uninstall-change-program
If you reset the PC, all your PC applications will be reinstalled. So, I wish that you contact the ASUS support for assistance to eliminate programs and get the recovery disk to perform the Reset if you want to do it again.
ASUS also provides the partition recovery for certain laptop models, you can check with them and try to reset the score itself.
Hope this information helps. If you have any other questions about Windows, please let us know.
-
Cannot perform the automatic update of Windows via IE
After the new installation of Windows XP Pro, Windows Update site reports "the website has encountered a problem and cannot display the page you are trying to display" trying to Express/custom install. Tried restarting, cleaning cookies, but nothing works.
Thank you
Suggestions:
How to reset the Windows Update settings?
http://support.Microsoft.com/kb/971058Diagnose and automatically fix common problems with Windows Update
http://support.Microsoft.com/mats/windows_update/http://support.Microsoft.com/kb/2497281
You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003Error code when you use the Windows Update or Microsoft Update Web sites to install updates: "0x8024D00C."
http://support.Microsoft.com/kb/958053Error message when you try to install updates from the Windows Update Web site on a Windows XP-based computer: "Windows Update has encountered an error and cannot display the requested page.
http://support.Microsoft.com/kb/914226
Windows Update has encountered an error and cannot display the requested page.
In addition, you see "[error number: 0x8024D00C]" in the upper right corner of the Web page. -
Cannot perform the update Windows with the error code A 8024, 000
Original title: error code 8024A 000, does that mean?
I had to do a clean reintall WIndows Vista and when I tried to update, I received error code 8024A 000, does that mean? How can I fix it?
Hi Anthony,
1 are you facing this problem with any particular Windows update?
2. What are the troubleshooting steps you have tried?
Please follow the links and check with the question:
Method 1:
How to reset the Windows Update components? :
http://support.Microsoft.com/kb/971058
Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Method 2:
Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2:
http://support.Microsoft.com/kb/2509997
Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
I hope this helps.
-
Cannot perform the insert/update on the form of tables, due to the dynamic action
Hi all
I created a dynamic action that calculates multiple cells in a table.
This feature works well, when I change the value of the associated cell then the computed value is changed by the dynamic action.
But I am not able to insert or update the line in a table when the dynamic action is enabled. When I put the condition 'Never', then the line is inserted or updated without any problems.
All guess where is the problem?
Apex version: 4.1.1.00.23
JiriNina wrote:
I don't know why the 123,40 value (or other) is set to the next item in line (f09, fsc, etc.)
>What is hidden and generated Apex elements are always included in the last cell (td) of the line. Thus, it has nothing to do with the next item, only the last cell.
If you see the last cell of the 888 Page you will see probably the same type = "hidden" entries here also.Your problem is not related to the HTML fragment to the last cell in the row showing all those extra items, it's somewhere else.
Oh, here comes the jQuery selector:
var clickedRow = $(this.triggeringElement).closest('tr'); $(clickedRow).children('td[headers="SAL"]').find("input").val(myCalculatedTotal);
SAL, COMM, w/e. here you will find the TD with headers = "COMM" and all the input fields and the value of all the entries in total calculated. Your selection is not precise enough in this case.
So, target the specific entry.
With the code example:change the switch on
$(clickedRow).children('td[headers="SAL"]').find('input[name="f08"]').val(myCalculatedTotal);
-
Error: "Setup cannot copy the NTLDR file" installation of SP3
original title: try to day XP Professional SP2 to SP3, but a 'copy' error "Setup cannot copy the file NTLDR.
Try to XP Professional Service Pack 2 update for... SP3, with "The Wizard software update Installation" through "automatic Microsoft updates.
Everything is going very well until a "Copy error" window saying:
"Setup cannot copy the file ntldr.
It gives 3 options
1: "Retry" (does not work)
2nd: 'Cancel' ('do you want continue Setup without copying this file?' by clicking 'Yes' gives 'Warning', "" If you cancel copying this file Windows might not work correctly. "") "Are you sure?) and
3rd: "Browse..." So I just restart and... "The installer was interrupted..." Restore the previous configuration... "And here I am with sp3 refuses to read its own files!
Any suggestions?
Thank youPS. : Before installation I disable the Avast! Anti-virus service. No daemon or alcohol 120% installed.
No other problem except when I try to update to the latest ATI AGP adapter CCC (catalist control center) I got a "failed to install".Information on the machine:
Operating system: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.100216 - 1441)
Language: EnglishSystem manufacturer: Dell Computer Corporation
System model: OptiPlex gx270s
BIOS: Phoenix ROM BIOS MORE Version 1.10 A06
Processor: Intel (r) Pentium (r) 4 CPU 2.60 GHz (2 CPUs)
Memory: 1022MB RAM
FG 0, 015 M/b: Dell Computer Corp.
Chipset: Intel i865PE
NorthBridge: Intel i865PE
SouthBridge: 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge Disk Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) EIDE
HARD drive: Maxtor 6E040L0
AGP: ATI Radeon HD 2400 SeriesYou can trust in the security of any computer used until you have formatted the hard drive & then did a clean install of Windows.
Note: The free version McAfee to test which is preinstalled on the computer is now permanently disabled .
Follow the instructions in this post of mine in another forum (to-the-letter & in order! ) to return the computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636
If you need additional assistance with the clean install, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system
Note: The computer must NOT be connected to the internet or local area network (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.
Wish I had better news for you. Good luck!
PS: If you still think again your registry database must be cleaned, repaired, amplified, to the point, healed, twisted, fixed, enlarged, "swept" or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx
-
Printer HP MFP M127fw cannot install the hardware error on xp sp3
Hello
I'm just impossible to install MFP M127fw on XP SP3, either by pilots or by using the installer Hp. whenever I try to install it says "an error has occurred during the installation of the unit", "the system cannot find the specified file. scanning functions are however works well.
Prompt response will be highly appreciated
Thank you
solved. She needed old .net Framework 3.5, I had 4 in my pc.
Thanks for the replies
-
You cannot change the settings of UAC with the guest account
adadadsadadsada
You cannot change the UAC settings through the guest account. You must be an administrator to perform the operation.
-
DW cannot convert the <; object >; tag created with swfObject 2
I have a Flash video on an "integrated" static html page using the swfObject method 2. When I open the page in DW CS3 I get this error message:
"This page contains < object > tags that may not work properly in the most recent versions of Internet Explorer. DM cannot convert the < object > tag. »
Page plays the video the two local system on the server.
this test page is here: http://www.rjdutton.com/about_movSWF2.html
Relevant source code is:
--> < object classid =... etc and
--> < object type =
Since this is the only code on the test page that refers to an object tag.
The on-board Flash I have on the website (home page and the who we are page) now are incorporated using < embed > via Flash CS3 (AC_Run active content), but this method does not validate. the swfObject method 2 valid.
I'm working on a Mac. Could someone check the page on the victory of the IE and see if the video is running?
Can I ignore the message 'error' of Dreamweaver?
Thanks - Susan
I think that you will have no problem ignoring the message.
Ken Ford
Adobe Community Expert - Dreamweaver/ColdFusion
Adobe Certified Expert - Dreamweaver CS3
Adobe Certified Expert - ColdFusion 8
Fordwebs, LLC
http://www.fordwebs.com
http://www.cfnoob.com -
Just updated to ios 9.2 (from 8 something) and my ipod touch is stuck at 'update of the iCloud parameters. I can not restore from iTunes because I have to disable "Find my iPod touch" first of all, and I can't do as the iPod is blocked with the message to update. Forcing a stop down does not work that for some reason, I am unable to turn off my iPod touch manually. I tried to turn off my wifi to see if that stops the iPod touch, but he always keeps on the message to iCloud. Do I just wait until the battery sinks so that it forces a reboot?
Place your iOS device into Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: I forgot the password or disabled device
If the recovery mode does not work, try the DFU mode.
How to put iPod touch / iPhone in DFU "Karthik doodles."
To learn how to restore:
To restore backup see:
Restore your device from an iCloud or iTunes backup - Apple Support
If you restore from a backup of iCloud apps will be automatically downloaded. If you restore from backup iTunes, applications and music must be in iTunes since synchronized as music media library and apps are not included in the backup of the iOS device what iTunes does.
You can re-download most of iTunes purchases by:
Download after purchase from the App Store and iTunes Store iBookstore
If no problem what happens or doesn't happen, and when in the instructions? When you get the iPod into recovery successfully mode and connect to iTunes on the computer should say that it found an iPod in recovery mode.
Maybe you are looking for
-
iCloud account associated with an abandoned email account and password
My iCloud account is associated with an old email address that is no longer valid. I do not know the password, so I can't get access to it for backups, etc. The password that activates my AppleID doesn't to iCloud account - which included a previous
-
Original title: error number 0 x 80040706 Description: object reference not set I can't install Empire Earth 2 on my PC because of this error. It is not the disc and I have no drivers up to date. I've tried every suggestion I could find but nothing w
-
Attempt to fix it several times and now be referred to as costly support center. Something is preventing the videos to play on the media center... receive video and sound but the picture is now colored shadows
-
xwizards.dll missing in an attempt to connect to wireless internet
My family and I recently moved, and our wireless setup initially worked well, using our existing router. A power failure has occurred and we were unable to connect to the interest in using the wireless router. I installed a new router with 3 of our
-
I have a pavilion laptop 2103tu g6. The question is, while I play any audio file, it freezes for 1-2 seconds between the two and the same for all videos also. Previously, I had the same problem last year. Hp technician changed the hard drive. And aft