Cannot perform vMotion.
Hi all
Cannot perform vMotion, let me explain you about my Infrastructure. We have 3 ESX4.1 host and the NAS/NFS data store, while I'm trying to migrate a virtual machine from one host to another, but I get the error message below
But when I checked and found that I am able to migrate the computer virtual ESX2 (ESX2 to ESX3) but impossible to migrate the virtual computer ESX1.
and the name of the data store is different in ESX1, find the screenshot below.
(Screenshot was removed for security reasons-)
Screenshot above, you can see both the server device or mount point name is different (the NFS folder name is also different) is the same in screenshot below.
(Screenshot was removed for security reasons)
the picture above you can see ESX1 storage folder name is different from ESX3 (find the image for the name of the folder path of the ESX3 storage below)
Photo above shows the path name or the Datastore NFS ESX3 folder.
I intend to migrate all the VM from the data store (ESX_ds04) and disassemble the data store and mount it again.
Could you please guide me IF I am doing wrong or if you have a KB or resolution for the same.
Its a rather long question and I have been scratching my head for a long time.
Thanks in advance.
Thanks Avinash,
But the problem has been resolved,
I not mounted on the datstore of the ESX host and installation rear with good file name and path.
When we set up initially we set up with the wrong file name,
example: \esx_ds01 in some of the ESX host and esx_ds01 in some of the esx host.
now I set up with esx_ds01 to all esx hosts and everything seems fine
Thanks a lot for your help Guyz
Tags: VMware
Similar Questions
-
Cannot perform the iTunes update
Hello
Try to update iTunes, I received the message (attached, in German):"There is a problem with the Windows Installer Package. As a result, cannot perform the update of iTunes. Contact the technical support. »
What can I do?
Thanks in advance for the help.
Try to repair the Apple Software Update of the programs and features Control Panel, and then reinstall iTunes.
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.
Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.
More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.
Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.
If the problem persists and you have a 64-bit system try for the old version of video cards which is a 64-bit Installer for most of the 32-bit code, similar to all 64 bit iTunes up to 12,1 versions.
TT2
-
I get the following error message:
Cannot perform this operation because the default mail client is not properly installed
Could someone help me please?
Moved from the community involvement Center
Hello
You have a common problem of Windows 7. You must set a default e-mail program and Windows 7 did not come with a pre-installed email program.
The default e-mail program must be installed on the computer - for example Windows Mail (Vista), Windows Live Mail, Thunderbird, etc.
Windows Live Mail is popular
http://Windows.Microsoft.com/en-us/Windows-Live/Essentials
Is Thunderbird http://www.mozilla.org/en-US/thunderbird/Windows Essentials help:
http://Windows.Microsoft.com/en-us/Windows-Live/Windows-essentials-helpYou can access outlook.com via Windows Live Mail
Set up an email application with Outlook.com - Microsoft Windows Help:
http://Windows.Microsoft.com/en-us/Windows/Outlook/send-receive-from-appAfter installing an e-mail program, make sure you have a default e-mail together program control panel > Default programs > set access and computer program defaults > Custom > click on the arrow down.
Web-based e-mail services can only be made the default e-mail program in these 2 cases:
* Yahoo, with the Yahoo tool bar
http://help.Yahoo.com/l/us/Yahoo/mail/YAHOOMAIL/settings/settings-10.html
* Gmail with the installed Google toolbarhttps://support.Google.com/toolbar/answer/34800?hl=en
Don
-
E-mail client
When I go to send mail sometimes I receive a message saying (cannot perform this operation because the mail)
client is not installed properley) thanks Karen
When I go to send mail sometimes I receive a message saying (cannot perform this operation because the mail)
client is not installed properley) thanks Karen
Hello
Please see the post below for links to support for all the popular email client programs.
Where can I get help with my questions by e-mail? (Windows 7)-Microsoft Answers:
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/where-do-i-get-help-with-my-email-questions/461490c7-302b-4cc8-bcd9-127e177d71c3Concerning
-
Cannot perform in Microsoft and Windows XP with SP3 updates
Cannot perform Microsoft and Windows XP with SP3 updates. Get error that IE8 settings are not correct or not saved for widows update web site. Continues to lead the userdata persistence setting change. persistence is enabled by the 83691 Article. I installed IE8 and still have the same error. Change the settings is not enabled on the site to update.
Hello
What is the exact error message you get when you try to do the windows updates?
Are you referring to the article?
http://support.Microsoft.com/kb/836914
I suggest you follow the method and check.
Your settings are not saved when you try to personalize the Windows Update Web site or the Microsoft Update Web site
http://support.Microsoft.com/kb/836914
How to reset Internet Explorer settings
http://support.Microsoft.com/kb/923737
WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings
-
I get a message "Cannot perform this operation because the default mail client is not properly installed". What should I do?
Unlike Windows XP & Vista, Win7 does not have a default email Client. [What were thinking?]
You will need to install a (e.g. MS Outlook;) Windows Live Mail; Thunderbird) , and then set it as a default for mail in CUSTOM (<>) article in Set Program Access and defaults of the computer , then restart your computer before any function send to or MailTo will become available.
In this forum, you will find some support for Outlook: http://answers.microsoft.com/en-us/office/forum/outlook
Note: Office 2010 Home and Student Edition is not include Outlook.
-
I cannot perform certain functions because he says that I'm not an administrator, but it's my computer and I'm the only person who uses this computer
What are the functions? More global changes (changes to the system, software installation) require an elevation in Vista/Windows 7.
Changes to the built-in Vista administrator account
http://support.Microsoft.com/default.aspx?kbid=942956
User - recommended configuration (Vista and Win7) accounts
You absolutely don't want to have only one user account. As XP and all other Windows 7, Vista, and modern operating systems are operating systems multi-user with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.
In particular, you do not want account only one user with administrator privileges on Vista and Windows 7 because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it may require more work you want to do. Better not to get into a bad situation at first.
The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.
If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:
Start Orb > Search box > type: netplwiz [Enter]
Click continue (or provide an administrator password) when you are prompted by UACUncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!
-
Hello
I'm not able to uninstall Skype on my laptop which is having windows 7 OS.It gives below error.The installed product does not match the installation source (S). Until a matching source is provided or the installed product and source are synchronized... Cannot perform this action.He appreciates if there is someone to support for this issue.Thank youSandeshHi Bader,
Thanks for the kind reply. In fact before checking your response, I checked in my system there was the .msi from the Skype software installation file was missing. so I installed the same version installation file and then uninstalled the software.And I have installed the latest version of the Skype software.Thank youSandesh -
Original title: loading with a password required
I'm trying to open a zip via windows 7. Same error occurs on windows xp. There is a "compressed (zipped) folders error" error Windows cannot perform the extraction. The destination file could not be created.
I recently got 8 deleted window and window 7 set in... I've never had a problem before
Hello
- Using default Windows 7 application or any other 3rd party application?
- What type of file you are trying to open?
- You try to extract the zipped file documents? If so where are you trying to save?
I suggest you try these methods and check the status of the issue.
Method 1
Try using Windows to extract the zipped files
http://Windows.Microsoft.com/en-us/Windows7/compress-and-uncompress-files-ZIP-files
Method 2
Perform the check and the boot if the problem persists.How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135Note:
follow step 7 of section of boot KB929135 to the computer in normal mode. -
Why I don't have the error: ORA-14551: cannot perform a DML operation inside a query
Hello
create table table_1 (phone number)
create or replace function function_a return number is l_rv number; begin l_rv := dbms_random.value(); insert into table_1 values(l_rv); return l_rv; end;
Select double function_a
Now, I get the error:
ORA-14551: cannot perform a DML operation inside a query
ORA-06512: at "FUNCTION_A", line 6
create the table table_2 (phone number)
insert into table_2 select function_a from dual
Now, I make the same mistake. It is to insert records into table_2
Can someone please clarify this?
Database Oracle 12 c Enterprise Edition Release 12.1.0.1.0 - 64 bit Production
Post edited by: O - O added: (select double function_a)
O - O wrote:
To be called from instructions SQL, stored function must obey "purity" following rules, which are intended to control the side effects:
- rule1) When it is called from a
SELECT
statement or a parallelizedINSERT
,UPDATE
, orDELETE
statement, the function cannot change database tables. - rule2) When it is called from a
INSERT
,UPDATE
, orDELETE
statement, the function cannot query or modify database tables modified by that statement.
Can you please explain this? I think that these statements are contradicted with
insert into select double function_a table_2
Now, I make the same mistake. It is to insert records into table_2
When your function is called by a select statement, an error is triggered because of rule1).
When your function is called in an insert statement, no error is raised. The insert does not work in parallel (this is an insert row after all). So rule1) is also not infringed. The insert is on the table2, change table1. Because it does not modify the same table rule2) is not violated. So no reason to trigger an error.
- rule1) When it is called from a
-
Cannot perform the operation while the host belongs to a Windows domain.
Hello
I'm trying to change recording alter DNS for a host of esx5.1 via vCenter but the following error;
Cannot perform the operation while the host belongs to a Windows domain.
The host is joined to the domain, but has a static IP configuration. I prefer to change registration without disrupting the VM on the host.
Any advice would be appreciated
Thank you
M
FYI, I got this problem by leaving the field, change the DNS settings, and then join the domain.
-
Hi all
your help is greatly appreciated...
Calling B.fucntion inside an A.fonctions to insert data into a table.
Here when you call the B.fucntion to insert data in the table... receiver AM a mistakeOmitted in B - SQL Error: ORA-14551: cannot perform a DML operation inside a query...
Can someone please help me to clarify this...
The FUNCTION A(varUPD_TYPE IN VARCHAR2) RETURN VARCHAR2 IS
varRETURN_VALUE VARCHAR2 (25): = NULL;numALLOWED_COUNT PROD. PROCESS_COUNTER. TYPE % ALLOWED_COUNT;
numLAST_COUNT_ADDED PROD. PROCESS_COUNTER. TYPE % LAST_COUNT_ADDED;
dtCHANGE_DATE DATE: = NULL;
varSTMT VARCHAR2 (2000);
bln_Allowed BOOLEAN;
myVar VARCHAR2 (32767).
BEGINIF varUPD_TYPE = "A" THEN
BEGIN
SELECT CH_DATE, LAST_COUNT_ADDED, ALLOWED_COUNT
IN dtCH_DATE, numLAST_COUNT_ADDED, numALLOWED_COUNT
PROD. PROCESS_COUNTER
WHERE NOM_PROCESSUS = "DAILY".
AND COUNTER_IND = A 'IF dtCH_DATE < = trunc (sysdate) THEN
numLAST_COUNT_ADDED: = 0;
END IF;EXCEPTION
WHILE OTHERS THEN
numLAST_COUNT_ADDED: = 0;
numALLOWED_COUNT: = 1;
END;
IF numALLOWED_COUNT > = numLAST_COUNT_ADDED + 1 THEN
bln_Allowed: = True;
varSTMT: = "UPDATE PROD. TMS_PROCESS_COUNTER ';
varSTMT: = varSTMT | ' SET last_count_added = ' | (numLAST_COUNT_ADDED + 1);
varSTMT: = varSTMT | "WHERE nom_processus =" DAILY "';
varSTMT: = varSTMT | "AND COUNTER_IND ="D"';
IF varSTMT IS NOT NULL
THEN
MyVar: = B(96,varSTMT);
PROC_LOG (' CALL B ': myVar);
IF myvar > 0 THEN
NULL;
END IF;
END IF;
On the other
End if;END IF;
EXCEPTION WHEN OTHERS THEN
PROC_LOG ("A failed '");
PROC_LOG (' SQL error: ' |) SUBSTR (SQLERRM, 1, 1000));
RETURNS A NULL VALUE.
PUT AN END TO;The FUNCTION B(numTABLE_ID IN NUMBER, varSQL_STATEMENT IN VARCHAR2) RETURNS NUMBER IS
varINSERT_BATCH_STMT VARCHAR2 (32767): = NULL;
varADD_REC_TYPE BATCH_TABLES. TYPE % ADD_REC_TYPE;BEGIN
INSERT INTO BATCH_STATEMENT (ID, TABLE_ID, STATEMENT, QUEUE_SEQUENCE_ID)
VALUES (Numidian, numTABLE_ID, varSQL_STATEMENT, 1);EXCEPTION WHEN OTHERS THEN
PROC_LOG ('B failed');
PROC_LOG (' SQL error: ' |) SUBSTR (SQLERRM, 1, 1000));
RETURNS - 1;
END B;
Structure of the Batch_statement table:
ID Number (15) not null
number (2) not null table_id
Statement varchar2 (4000) not null
Queue_sequence_id number (5) not nullWhy do you do such coding mess full of bad practices.
Remove the exceptions WHEN OTHERS, you're a turing a mistake in this way, they are bugs and (never) use functions to perform DML.
Functions are not intended for DML. Period.
-
Error #3200: Cannot perform the operation on the window closed.
Hello
I am trying to open a new window in an extension of CS, but when the test inside the first as an Illustrator, it gives me the error
Error #3200: Cannot perform the operation on the window closed.
When I test as a stand-alone desktop application, it works very well.
I tried it with a window pane mxml, as well as with the code, such as:
var newWindow:Window = new Window()
newWindow.title = "new window";
newWindow.width = 200;
newWindow.height = 200;
newWindow.open (true);
I use a WindowedApplication.
Flex 3.5
2.7 AIR
Flash Builder 4.5 (do not use the Extension Builder)
Thank you!
Jeff.
I'm sorry. I answered from memory. I remembered a little trouble. You did, but you must set the type.
Here's how:
victory: MyCustomWindowType = new MyCustomWindowType;
win.showStatusBar = false;
Win.type = CSXSWindowType.MODAL_DIALOG;
Win.Open ();
You probably want to create a component based on the window.
In addition, you must use CSXSWindowedApplication. It is possible that it took for this...
-
Cannot perform a DML operation inside a query
I want to run this SQL Developer
Set serveroutput on;
Select * from table (DOKUMENTACIJA.izvedi_import ('IID', 'ZKET', 'ZKET_BANKE', 'ZKES'));
but I get "rowid: AAAmigAAEAAAI/Vrammmm ZKET_BANKE DATUM_SPREMEMBE-14551 ORA-14551: cannot perform a DML operation within a query.
I read I need variable var, but I don't know how.
concerningdeclare v EMPARRAY_BV; begin v := DOKUMENTACIJA.izvedi_import('ZKET_BANKE', 'IID', 'ZKET', 'ZKES'); end;
According to the definition of EMPARRAY_BV, you could write something to show content...
-
I have 8 ESX 3.5 in a cluster... 2 ESX are unable to migrate virtual machines from the host, but able to migrate these 2 ESX VM to another ESX... Also able to migrate virtual machines and between these 2 host... When we try to perform a manual migration, it displays the following error...
* Cannot migrate < IP Source address > < address IP of Destination >. Host CPU is not compatible with the requirements of the Virtual Machine to CPUID level 0 x 80000001 registry "edx" host bits: 1110:1111:1101:0011:1111:1011:1111:1111 required: 11 x 0:1 x 11: 1100:0011:1111:x 0x1: 1111:1111 inconsistency detected for these features: NX/XD (data execution protection). If the Virtual Machine does not have this feature, power off the virtual machine and delete the requirement of NX/XD by changing the settings of the virtual machine (advanced options).
I bet the hosts are not configured similarly - some of them have the NX. XD bit enabled on the CPU, so for you to be able successfully to vmotion you will need to go into the configutration of the virtual machine and hide the NX/XD bit form OS - guest
If you find this or any other answer useful please consider awarding points marking the answer correct or useful
Maybe you are looking for
-
How to get a desktop icon to open enlarged using IE8?
OK, I'm back with the eternal question. How can I get an icon of Web site that is saved on my desktop to open in a maximized State? I'm using IE8 and Vista 64-bit. Internet Explorer window opens now enlarged very well, but all of the icons that I sav
-
How to contact Microsoft for the India
Hello I want to contact Microsoft for technical and other issues. I am living in India. Please give me toll free phone numbers from Microsoft which are valied in the India country. I have already tried in the Microsoft Support Web site, but these fig
-
Question on the docking station and external monitor support
Hello Can you please let me know of the docking station (name, model number, etc.) I need to connect to two external monitors to my hp laptop 8560w (not the laptop screen). Thanks in advance rogers7942
-
In cucm 8.6 (2), when I see the State of a phone as unknown that used to be recorded at the CUCM but has been disconnected, how long from the time of cut until the phone display as unknown? Is there a timer or is it an a system restart, etc.? We ar
-
Cannot open links in emails in Outlook Express
original title: using Outlook Express, suddenly am not able to open all the links on my e-mail address. No message appears, nothing happens It is a new problem... cannot open links hyper on my emails... using Outlook Express