Cannot perform your recommended steps before you install Windows XP SP3.

Similar Questions

• Installation of drive Media Express before you install Windows XP - Pro?

  Hi all

  I want to install Windows XP Professional on my Satellite A100-153.
  I have already done all the backups, created a tool and driver CD and I'm ready to start... BUT:
  What the Express Media Player? I have a recovery for the Express Media Player CD. What do I need to run the Express Media Player Recovery before you install Windows XP Pro?
  I'm not reinstall my Windows XP HOME Edition. As I am used to work with the XP pro edition I have a Windows XP pro. So no recovery.

  Can someone help me?
  Thank you very much!

  Hello

  Installation of the drive, I found a FAQ document very useful on the Express media:
  http://support.toshiba-tro.de/KB0/TSB58014O0008R01.htm

  In addition, on the HARD drive should at least 150-200 MB of free space available.
  This free space must be on the end of the HARD drive and there must be unallocated.
  To get this free space of HDD the 3 products part must be used namely Partitions magic 8

  good luck buddy

• Q327120 error when you install Windows xp sp3

  Original title:
  error code
  When I try my winxp sp3 his watch after error what is the solusion? Pls help

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question. If I understand correctly, you receive the Q327120 error when you install Windows xp sp3. I suggest you follow the troubleshooting steps to check if this may help.

  You did changes to the computer before the show?

  Method 1:
  You can try the steps in knowledge base article and check.
  Error message: Windows Service Pack 1 has detected that one or more protected Core system files on your computer have been modified
  http://support.Microsoft.com/kb/327120

  Method 2:
  

  Perform a clean boot and then try to install and check.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  Check out the link:
  How to download Windows XP SP3
  http://support.Microsoft.com/kb/322389

  Reference link:
  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  If you need further assistance, please answer and we will be happy to help you.

• I get 'Invalid key' when you install Windows XP SP3 Home Edition from a CD at retail and used the OEM key

  I restore an HP Pavilion computer and try to install Windows XP Home Edition, with the button on the side of the computer.  I contacted HP and they no longer have an available for this computer recovery CD.  So, I tried to install a copy of Windows XP Edition retail family, but when I enter the OEM product key I get "invalid key".  I read on this forum that you can not mix the OEM disc/keys with detail, but it seems that I don't have to buy another copy of Windows when it came with my computer.  What choices do I have?

  None!

  So I don't Support HP and Microsoft no help either.  Activation Center asked me to call the Department of parts (which is incorrect) and the parts Department told me that they cannot provide Windows which was distributed by HP!  Microsoft changed this start with Vista, so I do not understand why they are always telling customers that.

  Reference:

  http://social.answers.Microsoft.com/forums/en-us/XPInstall/thread/7ee88ddc-4560-4C1B-9987-ee340b902b05/

  http://social.answers.Microsoft.com/forums/en-US/VistaInstall/thread/5d9a3e4f-9948-4cda-8083-8116407a8c3d/.

• After you install Windows XP SP3, I am unable to use my modem.

  I had Windows XP2 on two of my computers and one day he came with an update for XP3 it says that you can download now so I asked data doctors on this issue and they said yes go before I did. But now I can't use my modem that I paid for new install when I bought them. When I tried to put in place my fax modem it askes me to insert the CD XP3, but I do not because I upgarded to line. How can I remove XP3 and reinstall my XP2 I still have my cd, s on both computers.

  original title: I got Windows XP2

  I guess you could uninstall service pack 3 (using the control panel > Add / Remove Programs), then install Services of Fax and then reinstall the service pack 3, but I do not know the consequences of doing this on all the updates post-sp3 installed.

  (If you really want to do it this way, I suggest seeking advice from experts in the Windows Update forum posting asking "is it safe to uninstall and reinstall xp sp3".  Include in the body of your message a question on post-sp3 updates).

  Because you have a Windows XP sp2 CD, the best thing for you to do is to create a CD of XP sp3 using the process known as "slipstreaming."  If you have a CD burner on your computer (i.e., a CD player that can write as well as to read the CD), it is a relatively easy thing to do - and it's always good to have a handy day XP installation CD.

  There are many websites that explain how to do this.  Here are 3:

  http://www.bleepingcomputer.com/tutorials/slipstreaming-Windows-XP-to-create-bootable-CD/
  http://Lifehacker.com/386526/slipstream-Service-Pack-3-into-your-Windows-XP-installation-CD
  http://www.winsupersite.com/article/product-review/slipstreaming-Windows-XP-with-Service-Pack-3-SP3

• Cannot install Windows XP SP3 via download and CD

  Original title: "should reinsatll XP, I get to SP2, but when trying to install SP3 there will not, accomplish IEXPLORE. EX - Application error ".
  I have Win XP MCE with SP3 and IE8 installed on my Dell 5150, which occurred without fault until it crashed 5 weeks ago.

  
  I reinstalled the OS to SP2 but when I try to install SP3 it proceeds smoothly until the , when it hangs and stops the hard drive. It is with SP3 via download and the CD that I bought.
  CTRL, Alt & Del give the info    
  
  I re-installed IE8 twice, but it does not cure the problem.
  
  Suggestions, please?
  * original title - IE8 blocks SP3 *.

  Hello

  How do you try to download the SP3?

  
  Method 1:
  You can perform the clean boot, and then try to install the Windows XP service pack 3 and check:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
  You try to install Windows XP service pack 3 with the help of the link and check:
  Overview of Windows XP Service Pack 3
  http://www.Microsoft.com/download/en/details.aspx?ID=10767

  Method 2:
  You can also check out the link to see how to install Windows XP SP3 on the computer.
  Learn how to install Windows XP Service Pack 3 (SP3)
  http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3

  Also check out the links to learn more:
  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718 steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

• install windows xp sp3 on ASUS hb1m-e

  Hello

  I have a PC with motherboard ASUS hb1m-e and 4 GB ram pc3.

  the problem is that I can't install windows xp sp3 on it. its already a windows 7 on it, but when you install windows xp sp3, it gives an error message below.

  Let's see: you try to install Windows XP on a computer with Windows 7, and you post to a forum for Windows 8.1.   Such confusion.  There is probably no XP driver for your motherboard.  You should check with Asus.

• Concerned about the compatibility and performance of i-Tunes if I install Windows 10 on my pc.  Can we predict what the problems are?  What solutions are there?  Thank you!

  Concerned about the compatibility and performance of i-Tunes if I install Windows 10 on my pc.  Can we predict what the problems are?  What solutions are there?  Thank you!

  ITunes 12.3 running on Windows 10 and it works great. Any questions or problems with it.

• Error message "the website has encountered a problem and cannot display the page" when you try to install Windows XP SP3 update

  Original title: cannot use Windows Update to install Windows XP SP3

  I have done a complete reinstallation of Windows XP Pro from the original disc and managed to update to SP2.  However, when I tried to upgrade to SP3, I got an error that "the site has encountered a problem and cannot display the page.  I tried all the suggested fixes that I can find.

  During the last attempt, I discovered that several dll is missing.  Here's the msxml6.dll, wups2.dll, c:\windows\system32\wucltux.dll and c:\windows\system32\wuwebv.dll.  If they are critical, where can I find them, and how do I get support.

  In addition, mshtml.dll is available, but the DllRegisterServer could not find an entry point.  Is this critical?

  In any case, I still can I install Microsoft Update or download/install SP3.

  The computer is an IBM R50e laptop.

  Thanks for any help you can give.

  Try to run this tool to windows update. This will help to re-register the dll

  After its done. try again and do the update

  hope this helps

• I got following message from the installation program Adobe - other instances of running Applications Adobe Manager that must be closed before you install this product. Please close or wait until they end. Please indicate how can I resolve the issue?

  I got following message from the installation program Adobe - other instances of running Applications Adobe Manager that must be closed before you install this product. Please close or wait until they end. Please indicate how can I resolve the issue?

  Please check if this helps https://helpx.adobe.com/creative-suite/kb/error-instance-updater-running-cs5.html

  Concerning

  Stéphane

• Before you buy Windows 7 it will modernize my Windows XP?

  Before you buy Windows 7 it will modernize my Windows XP?

  First, see if your computer meets the Windows 7 system requirements:

  o 1 gigahertz (GHz) or faster 32-bit (x 86) or 64-bit (x 64) processor
  o 1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)
  o 16 GB available space disk (32-bit) or 20 GB (64-bit)
  graphics device o DirectX 9 with WDDM 1.0 or higher driver

  If so, run the Windows 7 Upgrade Advisor to check for possible problems.  If it passes this test, you can buy a Windows 7 upgrade version and use it to perform a custom (clean) installation.   For more information, see upgrade from Windows XP to Windows 7 and Windows 7 Upgrade Considerations .

• After you install Windows Vista, the maximum capacity of the hard disk reduced 80.0 GB to 3 GB

  Original title: reinstallment recent Windows vista has me to the maximum capacity of my hard disk (80.0 gb) why? __

  I recentlyreinstalled my windows vista, everything seemed to look and will work perfectly, so I decided to see how much space was left on the hard drive. My surpise there was only 3 GB of 80.0 gbhard drive. Now I'm sure that you would agree wiyh me and say that there is something wrong when installing on if so what can I do about it? You, I noticed there are some files like programs program then theres (86) below I see only in a few different places, as well as many files sent a text message if they are from my old program as if they never got deleted or formatted.

  Thanks for listening

  Hello

  ·        Did you do a clean install of Windows Vista without formatting?

  ·        How many letters pilot are there on the system, for example C:\, D:\?

  ·        The number of records your C:\ drive?

  Open C:\ drive and select all the files that are present and check what size is (of all files). Let us know the size.

  If you did a clean installation without formatting then, it may be a folder named windows.old. If you have the folder on the system, then follow the steps mentioned in the article below.

  How to use the disk cleanup feature to delete the Windows.old folder after you install Windows Vista

  http://support.Microsoft.com/kb/930527

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you install windows 95, which is the executable that launches the installation process, and where it is located?

  When you install windows 95, which is the executable that launches the installation process, and where it is located?

  The file is setup.exe.  Depending on your version of Windows 95 CD, it could be in the WIN95 folder or in a subfolder of WIN95.

  If you have more Windows 95 questions, great places to get responses are microsoft.public.win95.setup and microsoft.public.win95.general.discussion newsgroups.  It is a Windows XP forum.

• Computer does not turn off: "... copy windows is currently working with a file. Either wait to finish, or close it before you quit Windows. »

  Computer doesn't go out.  A box appears that says: "... copy windows is currently working with a file.»  Either wait to finish, or close it before you quit windows. »

  There is no files or programs.  I tried to wait a few days, but same box appears.  Can I just power off or unplug your computer.  It is great in every other way except closing.

  Vickie

  If you are absolutely sure that there are NO other programs or open files. Yes, you can go to start, then turn off the computer and select shutdown

  When you restart the machine. go to this link below and scan your computer

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• When you install windows vista service Park 1, I have received an error code 80073712 with 13% downloaded only?. Can you help me to complete this process?

  When you install windows vista service Park 1, I have received an error code 80073712 with 13% downloaded only?. Can you help me to complete this process?

  Hi Gore EzekiahTongun

   

  You can see the steps in the below mentioned article Microsoft and verification.

  http://support.Microsoft.com/kb/947366

   

  I hope this helps.