cannot place subvi on the diagram

Similar Questions

• Cannot place text in the dressing area

  Hi all

  I need assistance with lesson 3 of Adobe InDesign CS5 Classroom in a Book. I am almost complete with exercise but will now have questions about the placement of text to the text-wrap area. I have already applied the text wrapping on the image of relevant graphics on the master page, but for some reason any InDesign me allow to place text in a text wrapping on the corresponding page of the document. Then I tried to re - trace my steps if I did anything wrong by the book, but I couldn't find the solution on my own, so I now ask this question here.

  I know this may seem a small problem for many of you, but for a noob like me it's kind of frustrating, so any help would be greatly appreciated.

  Miss Cao

  
  

  I think the problem is on the master page text frames. If I delete them and make new ones everything works, but there is a difference between your CS5.5 and mine, and it may be the source of the problem. There was some bug fixes issued and the current version of InDesign CS5 is 7.5.3. You always use 7.5.0 according to the file history, so the first thing we do is to download and install the patch (which could be a problem if this is a school computer). You can do help > updates... or by downloading the patch directly from http://www.adobe.com/support/downloads/detail.jsp?ftpID=5367

  Once you have done that you should try to open the file again, go back to Master B and replace with new ones two text blocks. In case you are not able to do it, I'll send you a link to a copy of your file where I did it for you. I add that a comment or two, as well, on a new layer that you can remove to let you know anything else I place that needs to be addressed.

• Error message on the 'open' file: 'cannot place the illustration. Could not read the tiff preview.

  To all,

  When you try to open an illustrator file I get the following error message:

  "Cannot place the illustration. Could not read the tiff preview.

  Anyone know how I can recover my document?

  Thank you

  Ian

  Version of IT? OPERATING SYSTEM?

  Does the linked graphics?

  You have several versions of the installed AI? If so, try all versions.

  Have you tried to drag the Acrobat file? Maybe he will open it.

  Just noticed you said "Can PLACE the illustration. You place instead of open by chance?

• InDesign doesn't let me place an eps file... gives an error "cannot place this file. No filter for the requested operation. »

  InDesign doesn't let me place an eps file... gives an error "cannot place this file. No filter for the requested operation. »

  This happens with a particular .eps file or many .eps files?

  • The EPS files from Illustrator? What parameters are used when files are saved?
  • Also this happens for all files created in Illustrator EPS (even one you create brand new, with just a few text and simple work in it).
  • Where are stored the EPS files that you place in InDesign?  If there is a form of corruption of files on the hard drive? (Maybe need repair file permissions?).
  • If you work on a network: can the files when they are saved as EPS files on your hard drive?

  CARI

• How to annotate the diagram?

  I need to annotate the following table with the values in the column of the brand.  I would like to a symbol appear for each date in this column.  The values in the column of the brand are calculated simply by subtracting a constant from a date in the Date column.

  

  Here's what it looks like if I try to include the column of the brand:

  

  Any ideas how to make this work?

  HI ' space,.

  The chart you are using is a graph of the category. Cards draw one or more sets of values in a list of categories.

  Your chart uses data listed in column A of the table (column heading) as labels for categories, spaced along the x-axis of the chart.

  The values in column B (not a column header) are plotted against the y-axis.

  When you add a second set of values to the table (in column (C), and then include this series in the chart, this series is added to the graph and the scale of the axis is automatically adjusted to account for these values (more on that below).

  You will notice that the four values in this column are placed on the card directly above the values in the same row in column B. Each value in the same row is attached to the same category, and each category in the list in column A is assigned to a post also spaced on the x (x-axis).

  Given that the values in column C are derived by "subtracting some constant of a date in the Date column' these values are also dates. If you want to note these dates on the x axis, the x axis should be a value axis, rather than a category axis.

  Digit has two types of graphics plot values against values - the scatterplot and the bubble chart. The appropriate choice for this task is the dispersion diagram.

  Category graphics take the line header and the column header labels.

  Values for scatter graphs cannot be placed in the column header or header lines. So the first place, needing a change is the Table.

  Click on any cell in column B (Delta) and press option + left arrow to insert a new column (non-en-tete) to the left of column B. Label the Date column and copy the dates in column A in this new column B. Note that these must be Date values and actual time, which can be formatted to display as those of the current column.

  Columns B and C now contains the first set of pairs x - y for the new diagram. Column D (Mark) will contain the values of x for the second series. Add a new column (E) to the right of column D to hold the values of y associated with brand x values in column D. These values will determine to what extent above the x axis each mark will appear. With the current range of value y (43-104), you can consider placing these brands with a value of 38 next to each date in the column of the brand.

  The result would be similar to this:

  

  Kind regards

  Barry

• How can I use a Subvi in the background when a sequence is running in the main VI

  I want to do this

  When I press a button on the main VI, a Subvi (#1) must run and take the data.
  At the same time, must execute a sequence, in which there are some other subVIs.

  My problem is that the Subvi #1 does not run when I press the button. The sequence works well. How can I run the sequence and the Subvi in the simultaneously?

  Hi Hugo,.

  When the sequence and your Subvi have not all dependencies given, they will work in parallel...

  Mind to attach some code or images of block diagram?

• "Printer properties cannot be displayed. The print spooler service is not running. "(even when it works)

  When I click with the right button on a particular printer and try to view the properties of it, I get the following message:

  Printer properties cannot be displayed.  The print spooler service is not running

  It is, it is run as go to-> Services administrative tools in the Control Panel checks.

  One of the 'printers', I installed is "send to OneNote 2007".  I can click right on this very well - just not this another printer. I'd be able to do if the print spooler is not running?

  Indeed, if I turn off the print spooler, * all * printer in "Printers and faxes" disappear.  So the fact that I'm still see them first place suggests to me that the printer spooler is running.

  I posted this on Microsoft.public.windowsxp.general a while ago and someone suggested that I visit this site .  Problem is C:\WINDOWS\system32\spool\PRINTERS is empty.  It is empty when the print spooler is running and it is empty when it is not.

  Also, I was unable to install KB896423 since I am running SP3.  Try to install he did the following:

  Setup has detected that the version of Service Pack for this system is newer than the update you are applying.

  There is no need to install this update.

  The printer is a "local printer attached to this computer" connected via a "Standard TCP/IP Port".  Personally, I think such a printer should be called "a network printer or a printer attached to another computer", but that is the terminology used by the "Add Printer Wizard".

  Hello terrafrost,.

  Thank you for visiting the Microsoft answers community.

  What is the model number of the printer that you are using?

  Printing a "Standard TCP/IP Port, is used for a printer that is directly connected to a network, not on your local system.

  I would try to uninstall your printer and reinstall your printer.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• It cannot be delete because the disk is write protected.

  When I want to delete a folder on drive c, then following the message show:
  It cannot be delete because the disk is write protected.
  Please help me

  These protections are put in place so that you do not delete the files or folders that have the need by other programs.

  If you know that you can remove there is a program called Killbox JUST BE VERY CAREFUL what you DELETE! Please rate me upward if you find my post helpful. Thank you!

• I send only less than 10 emails per day on my pc at home. 80% of the time, emails cannot be sent because the server of hotmail says that he is busy and to try again later.

  80% of the time, emails can be sent?

  I send only less than 10 emails per day on my pc at home. 80% of the time, emails cannot be sent because the server of hotmail says that he is busy and to try again later. It is even difficult to register the email project, the system responds that the server is busy.

  Hello Charles MEdgar,.

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• Cannot navigate back to the previous screen (screen cannot be closed with the ESC key)

  Hi all

  I create simple BB app with eclipse jde 4.6.1, here the code example.

  class myApplication extends UiApplication
  {
      // applicatione entry point
      public static void main(String[] args)
      {
          // create an instance of our app
          myApplication theApp = new myApplication();
          // "run" the app
          theApp.enterEventDispatcher();
      }
      // app constructor
      public myApplication()
      {
       myScreen screen = new myScreen();
          pushScreen(screen);
      }
  }
  

  where my screen is like this

  public class myScreen extends MainScreen implements ListFieldCallback {
  private Vector menu;
  private ListField menuList;
  private MenuItem menuItem = new MenuItem("Details",100,10){
  public void run(){
  int index = menuList.getSelectedIndex();
  if (index == 1){
  Dialog.alert("list  "+index+" selected");
  }
  }
  };
  public void drawListRow(ListField listField, Graphics graphics, int index,
  int y, int width) {
       ListField menulist = (ListField) listField;
       MenuRowManager rowManager = (MenuRowManager)menu.elementAt(index);
       rowManager.drawRow(graphics, 0, y, width, menulist.getRowHeight());
  }
  
  public myScreen(){
  super(DEFAULT_MENU|DEFAULT_CLOSE);
  setTitle(new LabelField("myScreen", LabelField.USE_ALL_WIDTH | DrawStyle.HCENTER));
  
  this.addMenuItem(menuItem);
  createListMenu();
  }
  
  public void createListMenu(){
  menu = new Vector();
  menuList = new ListField(){
  protected boolean keyChar(char key, int status, int time){
  if (key == Characters.ENTER){
  // open next window
  int index = getSelectedIndex();
  switch (index){
  case 0: //
  break;
  case 1: //
  break;
  case 2: //
  break;
  case 3: //
  break;
  default: // about
  break;
  }
  }
  return true;
  }
  };
  menuList.setCallback(this);
  menuList.setRowHeight(60);
  menuList.setBackground(BackgroundFactory.createSolidBackground(Color.BLACK));
  
  // first item
  BitmapField mIcon = new BitmapField(Bitmap.getBitmapResource("image1.png"));
  LabelField lblM = new LabelField ("First list item", DrawStyle.LEFT);
  lblM.setFont(Font.getDefault().derive(Font.BOLD));
  MenuRowManager menuM = new MenuRowManager();
  menuM.add(mIcon);
  menuM.add(lblM);
  menu.addElement(menuM);
  
  // 2nd item
  BitmapField tIcon = new BitmapField(Bitmap.getBitmapResource("image2.png"));
  LabelField lblT = new LabelField("Theater Near Me", DrawStyle.LEFT);
  lblT.setFont(Font.getDefault().derive(Font.BOLD));
  MenuRowManager menuT = new MenuRowManager();
  menuT.add(tIcon);
  menuT.add(lblT);
  menu.addElement(menuT);
  
  add(menuList);
  }
  
  }
  

  and the definition of menuRowManager is like that

  public class MenuRowManager extends Manager
  {
      public MenuRowManager()
      {
          super(0);
      }
  
      // Causes the fields within this row manager to be layed out then
      // painted.
      public void drawRow(Graphics g, int x, int y, int width, int height)
      {
          // Arrange the cell fields within this row manager.
          layout(width, height);
  
          // Place this row manager within its enclosing list.
          setPosition(x, y);
  
          // Apply a translating/clipping transformation to the graphics
          // context so that this row paints in the right area.
          g.pushRegion(getExtent());
  
          // Paint this manager's controlled fields.
          subpaint(g);
  
          g.setColor(0x00CACACA);
          g.drawLine(0, 0, getPreferredWidth(), 0);
          //g.drawLine(10, 0, 10, getPreferredHeight());
  
          // Restore the graphics context.
          g.popContext();
      }
  
      // Arranges this manager's controlled fields from left to right within
      // the enclosing table's columns.
      protected void sublayout(int width, int height)
      {
          // set the size and position of each field.
          int fontHeight = Font.getDefault().getHeight();
          int preferredWidth = getPreferredWidth();
  
          // start with the Bitmap Field of menu icon
          Field field = getField(0);
          layoutChild(field, 48, 48);
          setPositionChild(field, 0, 6);
  
          // set the menu title label field
          field = getField(1);
          layoutChild(field, preferredWidth - 16, fontHeight+1);
          setPositionChild(field, 55, 30-fontHeight/2);
  
          setExtent(preferredWidth, getPreferredHeight());
      }
  
      // The preferred width of a row is defined by the list renderer.
      public int getPreferredWidth()
      {
          return Graphics.getScreenWidth();
      }
  
      // The preferred height of a row is the "row height" as defined in the
      // enclosing list.
      public int getPreferredHeight()
      {
          return 60;
      }
  }
  

  the problem is, when the first screen showed (pushed), I cannot "navigate back (close) the screen with ESC, won't my code?" Am I missing something here?

  Thanks in advance

  You want to substitute keyChar() into your custom domain.

  Don't forget that you must re - delegate all keystrokes that you do not consume.

• Cannot view thumbnails in the picture library

  original title: problems of photo Windows 7 library

  I can display miniatures is no longer in my library of photos. I tried all the normal settings and patches. When I try to restore or update the parameters of peak, the thumbs are viewable for a second then go immediately to tiles. Can anyone help? Thank you

  I can display miniatures is no longer in my library of photos. I tried all the normal settings and patches. When I try to restore or update the parameters of peak, the thumbs are viewable for a second then go immediately to tiles. Can anyone help? Thank you

  ==============================================

  If this article does not meet the question... scroll down
  for the info already posted by: Shekhar S - Microsoft Support.

  Windows 7 - How to enable or disable
  Thumbnails in the Explorer of Windows 7
  http://www.SevenForums.com/tutorials/11738-thumbnail-previews-enable-disable.html
  (Scroll down to: an Option)

  =========================================

  Already posted by: Shekhar S - Microsoft Support.

  Q:
  Cannot view thumbnails

  A:
  Before you start make sure that you are logged on as administrator.
  Then proceed as follows:
  a. first of all, to disable the creation of thumbnail by opening Windows Explorer, by clicking on
  hold the button and selection of folder and Search Options.
  Click the view tab and check always show icons, never thumbnails. Click
  the OK button.

  b. then, run the disk cleanup on the C: drive and empty the cache so that you can retrieve
  disk space. You can find it in accessories | System Tools. Place one
  check the following thumbnails and click OK.
  Click on delete files in the confirmation window. Disk Cleanup will now be
  clear the cache of thumbnails and close.
  Note: This will delete the database of thumbnails and after reboot ing the
  computer it will automatically create.
  Delete files using disk cleanup
  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  (c) in Windows Explorer, navigate to the AppData\Local\Microsoft\Windows
  file under your name.
  If you can't find it, simply copy the following text:
  %LocalAppData%\Microsoft\Windows
  Paste it into the address bar and press ENTER.
  d. right-click on the file in Solution Explorer and select Properties.
  e. Select the Security tab.
  f. click on the Advanced button.
  g. in the permissions tab, click Edit.
  h. check to include the permissions that can be inherited from the parent of this object.
  i. click on the OK button on the permissions tab.
  j. click the Yes button in the Windows security box that opens.
  k. close all open mailboxes.
  l. return to the folder and Search Options and uncheck the show always
  icons, never the photos and you're done.
  Mr., restart the computer.

  I hope this helps.

  --------------------------------------------------------------------------------

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  =========================================

• "cannot find accespoint in the trial _crtCreateSymbolicLinkW in the file." DLL C:\WINDOWS\SYSTEM32\MSVCP110.dll."?

  I installed CC2015, Ps and Lr as a trial. As well as the Ps 13 elements trial.

  Installation goes well, Ps a Lr test started, but I can't open one or the other.

  When I go into the program files and open the applications from there, or I use the desktop shortcuts, I get an error "cannot find accespoint in the trial _crtCreateSymbolicLinkW in the file.» DLL. C:\WINDOWS\SYSTEM32\MSVCP110.dll ' (Dutch translation)

  Both Lr and Ps give the same error, only difference is the header indicating either 'Photoshop.exe - accespoint not found' or 'Lightroom.exe - accespoint not found. "

  Cannot download Jpeg or PNG images for some reason any (banned types of images)?

  PS Elements 13 starts in a small dualwindow who wants to open the library (left) or the editor in a trial (right), 13 items Ps starts and then crashes, the library opens if chosen.

  I tried to - and re - installing everything several times. Chat contact who gave me a subscription paid as a solution.

  However, I can't start any application Adobe 2015. even the trial of 13 elements Ps crashes at startup, after that he asked me to begin the trial.

  So Ps and Lr do not say expired test, in CC-Startup-tab it says 29 days left (in my tests), never gave the Apps tab "starting the trial" - buttons and only see the 'buy now' - buttons...

  Someone an idea?

  I use an i7Q820, 8 GB of RAM, Windows 8.1 computer.

  Tried to install with or without programs AV and firewall.

  Can I just clear and clean with cleaner creative cloud and start over?

  Lost some faith in software already from tent to install a trial already cost me more than half a day with no application of work so far and the proposed solution is a paid subscription where I've never seen a 'trial-expired-window', an open application or any place to put a key in.

  Thanks in advance.

  Eric

  First of all, let me write the correct translation of the error message, so everyone can find it, and sorry for my poor old translation, it should be;

  "Photoshop.exe - Entry Point not found", and "Lightroom.exe - Entry Point not found".

  "The entry procedure point not found _crtCreateSymbolicLinkW in the C:/Windows/System32/MSVCP110.dll dynamic link library."

  The solution is simple...

  This is a problem in Microsoft Visual C++ 2012, I found my answer in this post;

  Photoshop Entry Point not found

  My solution has been/is;

  Control Panel > programs and features (Add/Remove Programs) > first look for Microsoft Visual C ++ 2012 x 64 > right click > change (not remove/uninstall).

  A window pop up > choose repair

  The Microsoft Visual C ++ 2012 will be fixed x 64 > finish

  Then look for Microsoft Visual C ++ 2012 x 86 > right click > edit (not remove/uninstall).

  A window pop up > choose repair

  The Microsoft Visual C ++ 2012 will be repaired x 86 > when finished it will ask a reboot/restart.

  After normal restart of Photoshop, Lightroom and 13 started Ps elements and asked if I would continue my trial period.

  All applications work normal.

  A shame, I lost 2 days on Ps a Lr looking for this simple solution.

  I hope this will help others in the future.

• How to move/copy the sys schema table to the diagram of the system?

  Hello

  I am trying to copy the table from the diagram of SYSTEM SYS schema, I get the error:

  Could not commit: ORA-00942: table or view does not exist

  
  

  How to get out the schema SYS table?
  

  Any help will be much appreciated
  Thank you

  I am trying to copy the table from the diagram of SYSTEM SYS schema, I get the error:

  Could not commit: ORA-00942: table or view does not exist

  How to get out the schema SYS table?

  You can not - objects cannot be moved from one schema to another.

  You must re-create the object in the new scheme, and then delete the former.

  As I have already said, the only time where you have to do is when someone accidentally created their own objects in the SYS schema.

• How to place images in the text frame?

  Hi Experts

  I am just placing the image in text frame.

  If the text block is on the pasteboard image is then held successfully.

  If text from outside the pasteboartd block or exists outside the editing table and image not place in textframe while the text is inserted in the textframe.

  My coordinated picture text is:

  x = pt-81, 740

  y = pt - 138, 2750

  w = pt 760,123

  h = pt 1117,944

  It start from outside the editing table.

  indesign #target

  var myDocument = app.activeDocument;

  Try

  {

  var myTextFrame = myDocument.spreads.item (0).textFrames.item (0);

  myTextFrame.contents = "InDesign";

  myTextFrame.place(File("/C/temp/1.jpg"));

  }

  catch (e)

  {

  var k = 0;

  }

  I'm not understand that text is insert in textframe but image isn't the place.

  When I change the text block x = pt 10 and y = 10 points then this good script work.

  How place image in textframe which is outside the editing table?

  Thank you.

  Hello

  The bad news is that you cannot place a new object outside the editing table.

  The good news is that you can move...

  so:

  var myTextFrame=mDoc.spreads.item(0).textFrames.item(0),
  mPlace = [ myTextFrame.geometricBounds[1], myTextFrame.geometricBounds[0] ];
  
  myTextFrame.move([0,0]);
  myTextFrame.place(File("/C/temp/1.jpg"));
  myTextFrame.move(mPlace);
  

  Jarek

• Cannot place a picture of tones both channels in CS2 ID

  I have a psd file which consists of two channels of pantone spot. When I try to place it in indesign, it is said

  "Cannot place this file. No filter found for the requested operation. »

  Why is this, is there any help? I have to find a way around it, I need to make a publication using only black and a pantone shade green.

  I'm on Indesign CS2, Photoshop's CS4 and I'm on Mac OSX.

  Try the DCS 2.0 file.

  Oy, I feel dirty just by typing that.

  Bob