Cannot print from IE 8 after upgrading Vista to Windows 7

Similar Questions

• C6150 does not print after upgrading Vista to Windows 7

  Hello.

  I have an AIO C6150, which worked fine under Vista.  Since I've upgraded to Windows 7, I can't get a printout of any application or the windows test print.  The test print HP Solution Center works very well.

  -Printer is connected wireless

  -J' installed the latest driver from HP which is supposed to be ready for Win 7

  -J' have also installed the patch they recommend after upgrade to Vista

  There is no error.  Print job appears briefly in the Print Manager window, then disappears as if it printed.  I am at a loss, any help would be appreciated.

  Paul

  I found my issue as well, with the help of HP technical support.  Basically, it is a conflict between the generic drivers Windows and whole new drivers from HP.  Once that happened, it was a nightmare to get all the 'remains' of these two uninstalled drivers.  Once we did it, we have been able to recharge the HP driver package and everything works fine.

• Cannot print from Quicken 2010 after the recent update of Windows.

  Original title: PRINTER will NOT WORK AGTER WINDOWS UPDATE.

  WHEN I UPDATED FROM WINDOWS TO THE LAST UPDATE.  MY QUICKEN 2010 WON'T PTINT DOCUMENTS TO MY HP J4680 PRINTER.

  TO RESOLVE THIS ISSUE, RESTORE A PREVIOUS UPDATE

  Hello

  Please contact Microsoft Community. I will surely help you this question.

  To better understand the issue, I would need more information on your side.

  1. the problem occurs only while printing Quicken 2010?

  2. What is the Knowledge Base Article number of the update of Windows that has been installed recently?

  This problem could occur due to incorrect printer settings or driver corrupt.

  Method 1:
  I suggest you to remove and reinstall the printer. Check if it helps.

  a. in the charms bar, select settings.

  b. Select change PC settings.

  c. Select devices.

  d. Select the printerand select the icon to remove the printer.

  f. Select Add a device to reinstall the printer.

  Method 2:
  If the problem persists, I suggest you to download and install the latest printer driver on the manufacturer's Web site. Check if it helps.

  http://support.HP.com/us-en/product/HP-OfficeJet-J4000-all-in-one-printer-series/3645081/model/3692887/drivers

  See the article for more information.

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note: applies to Windows 8.

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• C4480 does not print after upgrading Vista to Windows 7

  Hello

  I bought a C4480 & installed on my laptop running Vista.  I bought recently installed Windows 7, it & printer worked OK. 2 days ago HP sent the file: PS_AIO_03_C4400_NonNet_Full_Win_WW_130_140.exe, (1/1, 205.09 M)

  I downloaded & installed, now the printer does not print. It scans ok just will not be printed. Called HP & said it was Microsofts problem. told by Microsoft of $ 80 or reinstall my computer back to the factory default settings. Not knowing much about computers I'm not want to do. The computer tells me the spool of printer off & to start but when I open the printer spool is on. I hope you understand that this is my 1st post.

  There is a patch for this here.  Try it!

• Cannot print under 64-bit versions of Vista or Windows 7

  Hello

  I saw a number of similar questions on different sites, but can't seem to find a solution to this one.  I tried to set up my printer HP Deskjet 710C on Windows 7 (64-bit edition).  The system detects the printer and installed the driver, but whenever I try to print a test page, nothing happens.  If I start to investigate the queue, I find that the print spooler is stopped running.  If I restart the spooler, reprint will stop.

  This seems to only apply to the 64-bit Windows versions.  My wife machine has Windows 7-32 bit and the same printer works very well.

  I formatted my machine and is back to 32-bit XP - everything works great, so there is nothing wrong with the hardware.  I formatted again and installed Vista 64-bit - I have similar to Windows 7 problems.  In this case, the printer sometimes picks up the paper, but nothing more.  The test page is displayed in the print queue and disappeared shortly after.  I ran the Microsoft Fixit tool, which couldn't find anything wrong.  If I remove the spooler and the attempt to print directly to the printer, the system responds immediately with the "Test page failed print" and opportunity crashed on an Explorer.

  The printer connected via a cable directly to the motherboard.  I run on a fully patched Windows 7 and I ran it on fees installs of Vista and 7 (with no other drivers or software installed).  There is no driver HP, only the standard Microsoft one.  The printer is listed on all the relevant compatibility material lists.

  Can anyone help, or is Win XP my only solution?

  Thanks in advance.

  David

  I confirmed that the pilot ends on the x 64 platform.  You will need to ask HP to fix this one.  There are a few other models that use the same basic components that fail also on x 64.

  the failure is in this function
  HPVSCP50! SwathCutter::SelectFormat

  I changed some of the settings of page size to see if I could get at least a page of test of the device but no luck.

  Alan Morris Windows printing team seek here Microsoft Knowledge Base: http://support.microsoft.com/search/Default.aspx?adv=1

• No sound via HDMI after upgrading Vista to Windows 7

  Data sheet:

  HP Pavilion Elite m9515y

  Sound:

  Realtek ALC 888 chipset s

  Video:

  GeForce 9600 GS

  With the original operating system Vista, I could right-click on the speaker in the taskbar and select the playback device and make the default output HDMI.  I erased my drive and installed Windows 7.  Now under the playback devices I have not the HDMI option.  According to me, speakers, headphones and Realtek Digital Output.  Sounds works fine with speakers or headphones.  I tried to install the latest audio and video of Nvidia and Realtek drivers.  I tried to go back to the original Vista drivers.  Nothing works.  At the moment I use a stereo cable to connect my PC from the headphone jack on my TV, but wish that I could get good audio HDMI works with Windows 7.  Anyone else having a problem with these chips sets?

  PROBLEM SOLVED!

  The motherboard has two S/PDIF outputs.  A pass by a connector and the wire internal graphics card HDMI.  The other goes to a RCA Jack on the back of the computer.  During normal operation of Vista, the driver probably did some function to determine if the HDMI connection is used, so that it does not disturb the owner of a system without card HDMI with this audio port additional inaccessible appear under their playback devices.

  Unfortunately, the BIOS or the audio driver or video card driver require an update for Windows 7.  No matter what function is used to detect if the HDMI connection is present does not, if ever it comes in the playback devices.  I hope someone at HP or Nvidia, Realtek is tuned for this.

  Until the corrected drivers or BIOS, I found a coaxial wire thin with an RCA connector on one end and who connected to the Digital Audio output on the back of the computer, transferred this thread in my machine, then cut and solder this wire over the graphics card HDMI input S/PDIF.  It seems stupid, but works like a charm.

  So ends 3 days of aggravation.

• Receiving IR of HP and MC remote control does not work after upgrading Vista to Windows 7.

  I upgraded a laptop HP dv9249us for Win 7 Ultimate (64 bit) and Home Premium (32 bit) respectively of Vista and an HP HDX 18 and found that the small remote controls supplied with the PC HP no longer work the IR receiver to control WMC.  For the moment I tried to find a solution for the dv9249us, as the HDX has also a greater remote specialized for the tv tuner, which is still working, but I found that HP did not provide software Win 7 upgrade for this model.  I tried a thought fix it was to be a known side effect of the upgrade process because he appeared in two different rooms and found a HP IR driver referenced to correct this problem for another model called ENE CIR Receiver Driver (sp41645.exe) and install this on the dv9249us without result.  When you check the Device Manager on the dv9249us I have not found reference to an IR unit either in the areas of Human Interface or Universal Serial Bus controller.  I found a reference IR in the section of the Human Interface of the HD-18 referencing an ENE CIR Receiver.  Ideas that you could provide for a non-professional would be appreciated.

  I can not find a model of dv9249 specifically on the hp site. I found the dv9200
  series. you have a link to your specific model?
   
  in all cases, try to remove the Device Manager devices and if requested if you want
  to remove drivers, select Yes. then make a stop at cold and then turn it on.
  Finally, see
  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/Ene-CIR-receiver-conflict-in-Windows-7/TD-p/161289
   
  link of a person found an alternative driver that solves the problem) on the page
  (See above).
   
  It seems that several HP models affected related issues.
   
  If this does not resolve the problem, suggest that also posting in the forums of HP.
   
   
   
  On Saturday, January 15, 2011 19:12:50 + 0000, shanewc wrote:
   
  > I upgraded a HP HDX 18 and a laptop HP dv9249us for Win 7 Ultimate (64 bit) and Vista Home Premium (32 bit) respectively and have found that the small remote controls supplied with the PC HP do work more the receiver IR to control WMC.  For the moment I tried to find a solution for the dv9249us, as the HDX has also a greater remote specialized for the tv tuner, which is still working, but I found that HP did not provide software Win 7 upgrade for this model.  I tried a thought fix it was to be a known side effect of the upgrade process because he appeared in two different rooms and found a HP IR driver referenced to correct this problem for another model called ENE CIR Receiver Driver (sp41645.exe) and install this on the dv9249us without result.  When you check the Device Manager on the dv9249us I have not found reference to an IR unit either in the areas of Human Interface or Universal Serial Bus controller.  I found a reference IR in humans
  Interface
  > HD-18 section referencing an ENE CIR Receiver.  Ideas that you could provide for a non-professional would be appreciated.
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Resolution problem after upgrading Vista to Windows 7.

  Original thread: Windows 7 upgrade messed up the screen resolution

  Hi, I had Windows Vista on my laptop. I installed Windows 7 Professional on the laptop but now my resolution went funny like the old days before windows xp. Help, please

  If the manufacturer of your laptop doesn't provide specific drivers for win7 and Vista drivers do not work, it would seem then win7 is not supported on this laptop

• Built-in mic stop working after upgrading Vista to Windows 7

  I've checked everything I can think of.  Nothing is cut.  When I go into control panel - sound - recording, there is a green check mark on the mic, but it captures all the sounds.  The microphone worked before I upgraded.  Any ideas?

  Jorjannaz wrote:

  (1) MODEL # CQ60 - 417-CA

  (2) P/N: NW158UA #ABC

  (3) the product key: {information}

  I think I got that right?

  Thank you.

  It is always helpful if you identify your OS by saying also that it is 32-bit or 64-bit.

  Here's where tit portal for your laptop support pages are.

  Go into the control panel. Select sound. Select the record. Select Configure. Select Configure microphone.  You should see what I have in the next image if all goes well at this point. If you speak into the microphone, you should see a green bar mobile.

  

  view your results.

  Best regards
  ERICO

• HP Photosmart C6280: cannot print on C6280 wireless after the upgrade to Windows 10

  Cannot print on C6280 wireless after the upgrade to Windows 10. Have removed the device, but try to re install the printer when is not found. Can print if I connect USB. Tried to reload the driver using HP Support software help, but when he arrives at the end of the download fails.

  Hi @Ron9871,

  Welcome to the Forums of HP Support!

  I see that you are unable to get your printer HP Photosmart C6280 wireless printing. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I would like to try the steps in this guide, "offline" Status Message printer (Windows 10).

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  • Print a Page of Network Configuration menu of the printer front panel. Note: the IPV4 IP.
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.

  Please restart the router, the printer and the computer in this sequence.

  If you're still having problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  You can try to change your WSD printer port by a Standard TCP/IP port.

  To do this, you will need your current IP address printers.  The Network Setup page shows the parameters of network for the product. To print this page; Press the button of network () on the control panel of the product.

   

• HP Officejet 5740: after that 10 updated iOS, cannot print from the iPad

  Hello

  I've updated my iPad to iOS 10.1.1 2 Air.  I can't print remotely.  It runs from my other devices (phone, Macbook Air) Apple which have not been updated to iOS 10.  I use AiO Remote.  The iPad recognizes the printer and the IP address is correct.  I was able to print from my iPad yesterday until I updated.

  I appreciate your help.

  Hi @AllanAAB,

  Welcome to the HP Forums!

  I came across your post where you are unable to print from the iPad after iOS update. I would like to help.

  Please refer to this article http://hp.care/2bSjSnW , he explains how to use AirPrint and also troubleshooting steps to solve the problems with it.

  Recommend that you remove the printer from the iPad, and then reconnect the printer on the iPad. (Display settings and select Wi - Fi, if the printer is listed, click on the i on the right side of the printer that there are listed and select forget this network/printer.) And reconnect the printer)

  Restart the router, printer, and iPad. I'm sure you could have already tried this.

  Also, look for the printer firmware updates (if applicable, on www.hp.com/drivers) and also check if there are other updates released by Apple via iTunes.

  Remove the HP all-in - One Printer remote app on the iPad and reinstall it.

  Let me know if this helped.

• After installing new ink cartridge cannot print from ipad hp 5510 series

  Unable to print from the iPad after installing new ink cartridge in a printer hp 5510.

  I can print from the laptop based on windows.

  the two settled on a wireless router.

  Help!

  (I reinstalled the software, reset the wireless, reset the computer, the hp 5519 is listed as the default printer.)

  Thanks for your reply. I did all these things and more... Finally observed that the IP address of the printer was 2 'off' the IP address of the iPad numbers.

  I've corrected the printer IP addy... and viola.

  IPad and laptop computer are once more compatible with the printer.

  Appreciate your message...

  Louise

• Printing 15 files lost after upgrade to Windows

  Recently, I helped my mother with the upgrade of its Windows Vista computer to Windows 7 Ultimate.

  I chose the option 'custom' improvement All were found in the "Windows.Old" file on the C: drive, but it is unable to locate his printing 15 files.

  She managed to locate "Thumbs" or "Vignettes", but we are unable to open them in the print shop.

  Could someone please help locate files printing 15 of my mother?

  The following article, default print shop projects are saved in the Documents:

  http://forums.encoreusa.com/TM.asp?m=40501

  If you upgraded as you noted, then print shop project files must be in the start menu > Documents

  If you still do not see them then go to the section C:\Windows.old\Users\OLD_ACCOUNTFOLDER\Documents

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• Can print control panel test pages, but cannot print from applications (Word, WP)

  Original title: can print test of control panel pages, but cannot print from applications (Word, WP) no error no message other than can not find printer.

  Recently upgraded to SSD as boot drive.  everything is working except cannot print from Word, WP or any application (Editor, etc.).  Can print test pages to control panel on each installed printer, and do not appear.  Try to print from Word he pauses and says "cannot find the printer."  Tried reinstalling Word without solving the problem.  I don't know that the problem is Windows 7 related, not printer hardware problem.  Several times reinstalled printer that also does not resolve the issue.  Any ideas?  Anyone?  Anyone?

  Hi Doug,

  
  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
   
  
  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. What is the brand and model of the computer and the printer?
  2. have you made any recent hardware or exchange of software on your computer before the show?
   

   
  Please follow the methods and mark the question below:

  Method 1:

  
  Step 1:

  Run the Microsoft Fix It from the link below.
  
  Diagnose and automatically fix problems printing and printer:
  http://support.Microsoft.com/mats/printing_problems/
  Step 2:
  
  Follow the steps in the link below.

  Printer in Windows problems:
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
  
  Method 2:
  
  Follow the steps in the link below.
  Find and install printer drivers in Windows 7:
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
  Method 3:
  Follow the steps in the link below.
   
  Why can I not print? :
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  If the problem persists then I suggest to uninstall and reinstall the printer drivers.

   
   
  I hope that the information above helps you.

• Cannot print from Firefox 3.6.13

  Cannot print from Firefox. 3.6.13. says it's printing, but only a blank page comes out of the printer. Safari works fine, but I like Firefox. With the help of Mac 10.6.5.

  Probably caused by a Bug in Firefox, which is supposed to be fixed in versions of Firefox 4.0. Until Firefox 4 is out, my suggestion is to use the preview before printing and if the preview is empty use Safari to print this page. This extension will allow you to click right into Firefox and open the same page in Safari, so you don't have to copy' only paste the URL.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/open-in-Safari/