Cannot read image jpg

Similar Questions

• Not able to import images into Lightroom 5.7, error 'cannot read Images.

  I've recently upgraded from lightroom 5.6 to 5.7.  I can no longer import pictures from my card to lightroom.  Lightroom, download photos, but warns against photos are not read and cannot import.  What is my problem?

  Hi helproy,

  Could you please check the Destination folder in the import on the right side window.

  Also please try to import images to another location on your computer.

  Let me know if it helps.

  Kind regards

  Tanuj

• Recently replaced hard drive. CD and DVD burned on vista cannot read images, but play videos on an another computer (XP). They are readable on computer vista created the. Closed manually as well.

  EMachines replaced my hard drive. I normally share files between computers with CDs and DVDs. returning from a trip, I downloaded photos and videos of my Sony camera to computer vista with Solution Explorer, as usual. I burned the pictures and videos on CD and I tried to transfer them to my Toshiba laptop, XP. The trasfered from videos, but the image file was empty. I have repeated twice, thus closing manually. Thew CD shows as complete on the vista machine.

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

  Read the info on above link and the links in "see also".

  This may be your problem:

  Choose the size of the ISO image when you need a highly compatible disc that will play in computers with an older version of Windows or in devices such as CD and DVD players that can play video files and music digital. For more information about choosing a disc format, see which CD or DVD format should I use?

  See you soon. Mick Murphy - Microsoft partner

• in lightroom 5, I was importing images via a card reader. Now you can see the images on the computer but when I try to import it says that it cannot read the card of ideas how to fix?

  I was importing images via reader of card without problems. Now, all of a sudden, I can see the images on the screen, but when I try to import the computer says it cannot read and quote the numbers of images. No idea how to fix?

  Please give us the exact error message.

  Please indicate your operating system.

  Please indicate the exact version of Lightroom you use.

  Please give us any other relevant details.

  -What this means: "now, all of a sudden, I can see the images on the screen? You are looking in Lightroom or your operating system or the screen of the device? Where?

• What does this error message Adobe Muse: MuseJSAssert: error calling slector function: SecurityError: cannot read property 'documentLes' of 'HTMLIFrameElement': blocked a frame with Malv "null" access to an image of the cross-origin.

  So, what happens with this error message in the Muse?

  MuseJSAssert: Call slector function error: SecurityError: cannot read property 'documentLes' of 'HTMLIFrameElement': blocked a frame with Malv "null" access to an image of the cross-origin.

  It is a mistake to real security generated by the browser when you view a page with the iFrame content locally.

  Please refer to the answer of Zak in the following thread: https://forums.adobe.com/message/6496180#6496180

  See you soon,.

  Vikas

• Images JPG, stored in DB, are not displayed on the screen/image.

  Hi friends,
  
  I have a form to save and retrieve images (JPG, GIF, TIF) to and from the DB, using WEBUTIL_FILE_TRANSFER. CLIENT_TO_DB and CLIENT_IMAGE. WRITE_IMAGE_FILE respectively.
  It works fine, but with few JPG images, it stores in DB, but not displayed on the screen/image.
  Second, if I try to retrieve and write the JPG to the operating system (using CLIENT_IMAGE. "" WRITE_IMAGE_FILE), he invited error "FRM-47101: cannot write the file image.
  
  Environment:
  Forms [32 bit] Version 10.1.2.0.2
  Operating system XP Pro 2002 SP3
  Oracle DB 11 g Enterprise Edition rel. 11.1.0.7.0 - 64 bit
  
  Any help will be much appreciated.

  Hello

  Some recent JPEG formats are not supported by the forms. I can't tell you exactly what, but I have already noticed that some images could be made only by the forms. The only solution is to save the images with another program to transform the internal format to a recognize an or use a Java Bean able to read all of these formats.

  François

• Satellite Pro L510 - computer laptop Toshiba DVD - RAM cannot read disks

  My laptop toshiba Satellite Pro L510 computer may not play all discs as I installed Microsoft Expression Studio 4 by using the original CD... now whenever I insert a disc, the dvd - ram turns the disc for a few seconds and thn stops spinnig.

  Then drive shows that there is nothing inside the disk and it is completely empty.

  I can't even restart my operating system discs cannot be read from the bios either.
  I uninstalled the drive, the updated drivers, but it did not help. Please help me, I really need to use dvd ram... I use windows xp sp2 and using the laptop for 8-9 months...

  Help, please!

  http://www.Microsoft.com/UK/expression/products/StudioUltimate_SysRequirements.aspx
  According to this statement you must have installed Windows XP SP3 home edition.

  Your ad is a bit confusing to me. You have a problem with the functionality of DVD - RAM or optical disc drive cannot read all drives (different CD, DVD, DVD - R formats. DVD + R and so on)?

  I put t know what is the problem with the optical disc drive, but way generally, an installation of software packages has nothing to do with ODD when you use it as first boot device.
  > I can not even restart my operating system discs cannot be read from the BIOS either.
  Restart or reinstall?
  Is a readable recovery DVDs when you try to start the recovery image installation?

• Tecra M10 - 11U - DVD + cannot read & disk partitions

  Hi all

  I just got my new Tecra M10 - 11U and noticed 2 things troubling
  (1) my DVD cannot read DVD + R - Vista recognized the DVD and its type, but cannot open it. Ideas?
  (2) my drive letters are C and E, where is my D drive, is the hidden recovery drive?
  Is it safe to change the E to D drive

  Nirko

  Hello

  1. it is not easy to provide a response to this. The question is rather general and who knows what kind of things is on this DVD + R media.
  2 D drive probably doesn t exist. You can check if the D drive letter is available for free. If so this means that this player is not available. You can check in computer management > disk management. Choose the second partition and click with the right mouse button > choose the option change the drive letter or path. You will see that D is available here.

  Recovery disk doesn t exist and it is not hidden. Toshiba recovery image is saved in the folder called HDDRecovery on the second partition.
  * You can change the drive letters, but before you do anything whatsoever, please create recovery DVD.*

• Cannot copy file: cannot read the source code or drive WINDOWS XP

  I'm trying to transfer pictures on my old XP computer on an external hard drive.  After performing a backup on the drive hard seagate WD I went looking for pictures on the external hard drive, and they aren't there.  I went back on the XP machine and tried to copy the files to a CD but I get the message cannot copy file: cannot read the source code or the player.  I can open images but cannot move it to another folder or copy and paste pictures anywhere.  The photos are saved in an outdated version of microsoft's digital imaging software.  Help, please.

  Hello

  (1) is the specific question of the images?

  (2) where the images are on the computer?

  You can try the following methods and check the status of the issue.

  Method 1:

  Configure the computer to clean start State to check software conflicts. See the following link on how to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 4 of the above article.

  Method 2:

  If the problem is specific to the pictures folder, then it might be a problem with permission. You can try to take ownership of the folder and check if you can transfer it. read the following article.

  How to capture a file or a folder in Windows XP?

  http://support.Microsoft.com/kb/308421

• "the paint cannot read this file" message when you open the file from the internet

  painting windows xp

  I have problems with my painting. When I try to open or to save a file in the internet paintfrom it is said: Paint cannot read this file, this is not a valid bitmap file, or its format is not currently supported

  How do you try to do this?

  Try the click with the right button on the image and choose Save image as, and then save it to your desktop. Then go into file-> only open paint and select the image on your desktop.

• Cannot copy images from any type of disc. ??

  Cannot copy pictures on any type of disc. the computer behaves as if she is unable to format the drive? I thought that this was done automatically.

  Hello

  ·        What is the exact error that you are experiencing when you try to burn the disk?

  ·        Outside photos, you are able to burn other files on the disk?

  ·        You use any burning software to burn the photos to disk?

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  I suggest to format the drive and check if you are able to burn discs or not. Follow the steps mentioned below.

  a. be aware that Windows XP, in its native form, does not directly support CD formatting. Formatting a CD requires support for the ISO images that is missing from Windows XP.

  b. download or buy CD and formatting of third-party burning software. Third-party CD utilities include features like CD burning, imaging of CD and the CD put fit.

  c. install the third-party software, following specific instructions in accordance with the software documentation. Many programs will require you to restart Windows to complete the installation. Close all other applications and do it.

  d. place the disk you want to format in the drawer. Make sure that it is in the drawer of CD - R or CD - R/W and not another tray (tray of DVD) or a simple CD player.

  e. start the third-party application and follow the instructions on the screen as they appear. Choose the "Format CD" option on the file menu, or choose 'Create a new CD.' This application controls tend to vary an application to, so be sure to check the documentation.

  f. don't forget to leave the CD in the taskbar until the process is completely finished. If you remove the CD before the completion of the formatting, you will ruin the disc.

  g. give a volume name to your new CD.

  I also suggest you to check the article mentioned below.

  Should which CD or DVD format I use?

  http://Windows.Microsoft.com/en-us/Windows7/which-CD-or-DVD-format-should-I-use

  Note: This article also contains information about Windows XP.

  I suggest you run the fix it is present in the article below.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• images .jpg or .gif in emails - WLM 2011

  When I try to forward emails that have images .jpg or .gif in the message body, images sometimes appear in a banner at the top of the message window & the place where they were included in the body of the message contains a box with a red X & text in it, who reads something like:

  "cid: * e-mail address is removed from the privacy *'. '.

  The images in the banner have names such as 'ATTxxxxx.jpg' or ' ATTxxxxx.gif.

  Is it possible to "force" the images appear in their original location in the body of the message during the transmission of the message?

  Hello

  1. using any email client or Internet Explorer to send emails?

  2. you are using a different Web browser?

  If you use Windows Live Mail, I suggest you to send your application in Windows Live Solution Center for better support

  http://www.windowslivehelp.com/product.aspx?ProductID=15

  Otherwise, I suggest you to provide more information to help.

• Problem with the context menu: eception typeError: cannot read property CONTEXT_IMAGE undefined

  Hi, I wanted to try the following context menu with the javaScript function:

  function addMyItem() {
          var myItem = { actionId: 'Delete', label: 'Delete', icon: 'delete.png' },
              contexts = [blackberry.ui.contextmenu.CONTEXT_IMAGE, blackberry.ui.contextmenu.CONTEXT_INPUT];
          blackberry.ui.contextmenu.addItem(contexts, myItem, function () { console.log('hi') });
      }
  

  I have this function of reference on the API [1]

  When I try to run this function, I get the error:

  Eception typeError: cannot read property CONTEXT_IMAGE undefined

   

  
  What's not here?

  EDIT: I have the function ID in my config

  [1] https://developer.blackberry.com/html5/apis/blackberry.ui.contextmenu.html

  I have a little differently, but have checked that it worked for me during a test.

  var share = {
    actionId: 'share',
    label: 'Share Image',
    icon: '../images/share.png'
  };
  
  var contexts = [blackberry.ui.contextmenu.CONTEXT_IMAGE];
  
  blackberry.ui.contextmenu.addItem(contexts, share, function(){
    alert('Sharing is caring!');
  });
  

  If this does not work, can you let us know what development kit software that you use, and we can test again if necessary?

• JQuery: Eception TypeError: cannot read property 'setDefaults"undefined

  Hello

  My page was working fine, until I started to add more and more jquery library.

  Here is the error I get in the developer console:

  appointment_new_validation.js:3 Eception TypeError: cannot read property 'setDefaults"undefined

  The jquery validation plugin is not working now

  I tried to put the library links (in red) in all positions in the header and still get the error message.

  Here is the content of the page:

  <! doctype html >

  < html >

  < head >

  < meta charset = "utf-8" >

  < title > new appointment < /title >

  "< link rel ="icon"href ="... /... ' / images/favicon.ico "type =" image/x-icon"/ >

  " < script src =" https://code.jQuery.com/jQuery-2.1.1.min.js "type =" text/javascript"> < / script > "

  < script >

  function getDealership (val) {}

  $.ajax({)

  type: 'POST',

  URL: "appointment_new_check.php",

  data: 'dealershipgroup_id =' + val;

  success: {function (data)}

  $("#dealership_id").html (data);

  }

  });

  }

  {.changes (function ($(«#dealership_id»))

  Alert ('DOING GARAGE BOX VISIBLE');

  });

  < /script >

  " < script src =" http://AJAX.aspnetcdn.com/AJAX/jQuery/jQuery-2.1.3.min.js "> < / script > .

  " < script src =" http://AJAX.aspnetcdn.com/AJAX/jQuery.validate/1.13.0/jQuery.validate.min.js "> < / script > .

  " < script src =" http://AJAX.aspnetcdn.com/AJAX/jQuery.validate/1.13.0/additional-methods.min.js "> < / script > .

  < script src = "appointment_new_validation.js" > < / script >

  <! - delete notes jQuery - >

  < script type = "text/javascript" >

  $(document) .ready (function () {}

  $(".delete").click (function () {}

  $("#note_modal").show ();

  var note_id = $(this) .attr ('dir');

  $('.note_id').val (note_id);

  Alert (note_id);

  });

  $("#note_modal_button_no").click (function () {}

  $("#note_modal").hide ();

  });

  });

  {$(document) .ready (function ()}

  $(' #note_modal_button_yes') .css ('cursor', 'point') ravishing (function () {}

  var note_id = $('.note_id').val ();

  $.ajax({)

  type: 'POST',

  URL: "note_delete.php",

  data: {}

  note_id: note_id

  }

  {.done (function ())}

  Alert ('record has been deleted");

  Location.Reload ();

  });

  });

  });

  < /script >

  <!--> date picker

  "< link href="/scripts/jquery-ui-1.11.4.custom/jquery-ui.css "rel ="stylesheet"type =" text/css">

  "< script src="/scripts/jquery-ui-1.11.4.custom/external/jquery/jquery.js "> < / script >

  "< script src="/scripts/jquery-ui-1.11.4.custom/jquery-ui.js "> < / script >

  < script >

  {$(function()}

  $(«.datepicker»).datepicker({)

  numberOfMonths: 2.

  showButtonPanel: true,

  dateFormat: "dd-mm-yy".

  });

  });

  < /script >

  <! - time Picker - >

  "< link rel ="stylesheet"href="//cdnjs.cloudflare.com/ajax/libs/timepicker/1.3.5/jquery.timepicker.min.css ">

  < script type = "text/javascript" >

  $(document) .ready (function () {}

  $('.timepicker').timepicker ({}

  timeFormat: "HH: mm"

  interval: 15,.

  minTime: '10'.

  maxTime: '22',

  defaultTime: '7'.

  startTime: 7:00 ',

  Dynamics: false,

  drop-down list: true,

  ScrollBar: true,

  });

  });

  < /script >

  < / head >

  < body >

  < name of the form = "new_appointment" id = "new_appointment" method = "POST" action = "appointment_new_create.php" >

  < div class = "column_2" >

  < div class = "column_section" >

  < div class = "column_section_header" > basic Details </span > < / div >

  <! - Person ID - >

  < div class = "form_field_tag" > customer < / div >

  < div class = "form_field_wrapper" >

  < input name = "personid" type = "text" class = "form_field" readonly value = "[ID: <?]" PHP echo $person_row ["renid"];? >] <? PHP echo $person_row ["title"].' '. $person_row ["FirstName"].' '. $person_row ['name'];? > ">"

  < / div >

  <! - DATE - >

  < div class = "form_field_tag" > appointment Date < / div >

  < div class = "form_field_wrapper" >

  < input type = "text" class = "datepicker form_field" name = 'date' >

  < / div >

  <! - TIME - >

  < div class = "form_field_tag" > appointment time < / div >

  < div class = "form_field_wrapper" >

  < input type = "text" class = 'timepicker form_field' name 'time' = >

  < / div >

  < / div >

  < / div >

  < div class = "column_2" >

  < div class = "column_section" >

  < div class = "column_section_header" > appointment location < / div >

  <!--dealer group-->

  < div class = "form_field_tag" > dealer group < / div >

  < div class = "form_field_wrapper" >

  < select class = "form_field" name = "dealershipgroup" id = "dealershipgroup-list" onChange = "getDealership (this.value); ">

  < option value = "-1" > select dealer group < / option >

  < option value = "-1" > - < / option >

  <? PHP {? >}

  < option value = "<?" PHP echo $dealership_group_row ['id'];? > "> <?" PHP echo $dealership_group_row ['name'];? > < / option >

  <? PHP} while ($dealership_group_row = $dealership_group_query-> fetch_assoc());? >

  < / select >

  < / div >

  <! - dealer - >

  < div class = "form_field_tag" > dealer < / div >

  < div class = "form_field_wrapper" >

  < select class = "form_field" name = 'dealer' id = 'dealership_id' >

  < option value = "-1" > select dealer < / option >

  < / select >

  < / div >

  < / div >

  < / div >

  < div class = "column_1" >

  < div class = "column_section" >

  < div style = "" text-align: center; ">"

  < input type = "submit" name = "submit" class = "form_submit_button" value = "Create appointment" >

  < / div >

  < / div >

  < / div >

  < / make >

  < / div >

  "< script src="//cdnjs.cloudflare.com/ajax/libs/timepicker/1.3.5/jquery.timepicker.min.js "> < / script >

  < / body >

  < / html >

  Any help would be much appreciated!

  You should have 1 single jQuery core library by document.  At the top of your page you referenced jQ 2.1.1 and further down you have a reference 2nd in 2.1.3.  Delete a.

  Best practices: put all your scripts and functions at the bottom of the page.  Your page will load a little faster.

  Nancy O.

• Error: "Eception TypeError: cannot read property 'getNumFrames" undefined "-when I test Flash/HTML5 in the browser

  I work in Flash / HTML5. When I publish directly from Flash, my project works very well. However if I open the HTML file directly in a browser, (I tested in Chrome and Safari on a Mac) I get this error message: easeljs - 0.8.1.min.js:13 Eception TypeError: cannot read property 'getNumFrames"of undefined a.load @ preloadjs - 0.6.1.min.js:12

  A google search suggested that the code tries to run before the document was loaded - so "undefined". However, I can see that the body of the HTML file tag seems to deal with this (I think) < body onload = "init (); »  ... The init() being the function that includes the Chargers how to control the loading of the file is made etc...

  Also, I get the error:

  XMLHttpRequest cannot load file:///Users/MyLocalPathToMyProject.../images/MyProject_atlas_.json. Original cross applications are only supported for Protocol schemes: http, data, chrome, chrome-extension, https, chrome-extension-resources.

  Who could be responsible for the "undefined".

  Everyone knows about this problem? Can we simply cannot test it locally? Does anyone have a solution?

  Sprite sheets do not work from the local file system. Go to the publication settings and uncheck the sprite sheets.