Cannot read some of the numbers on my Windows XP product key label.

Similar Questions

• Failure of the HP G62 installation windows 7 product key

  I followed the instructions and did a disc of x 17 - 59465.iso.  He tries to install windows, I had better luck with the computer connected to the internet.  However the key product would not take.  I finished the installation.  If you want to activate the product key, and then were.  Without success.  The recommendation was that I had the wrong version of windows 7.  The package installed with service Pack 1.  I've had it confirmed that the computer was delivered before the service pack has been issued.

  Where can I find the pre Service pack 1 Windows to start all over again.  The label indicates that the computer came with Home Prem OA.  Help would be very appreciated.

  http://h30434.www3.HP.com/T5/user/viewprofilepage/user-ID/732531

  x 17 - 59465.iso is the ISO of Windows 7 Ultimate SP1 64 bit.  Let me tell you that most laptops do not come with Ultimate, so the report that the key was for the wrong version is probably correct as you say "label indicates the computer came with Home Prem OA."

• Cannot read some burned DVD SD-R2212

  Hello
  Cannot read some burned a DVD with my cd/DVD-ROM sd-r2212.
  I have found no information on this drive (Dvdr-R or Dvd - R +)

  Where is the problem?

  Do I need a new driver?

  Thank you

  Hello Daniel

  What you mean with some DVDs. How do give you an answer if you are not specific to your problem?
  Which laptop model you have?

• HP CDDVDW TS - T633P SCSI CdRom - cannot read SOME DVD

  PC is a Touchsmart 600-1000 t, Windows 7

  DVD Player cannot read some DVD.  Completed all the 8 steps in "Drive cannot read disks (Windows 7)" on the HP site.  A ran HP "Hardware Diagnostic Tools" (linear CD search Test"and it passes on some DVDs and returns"No Media"on the other.)  Very old CD "Office for WIndows 95" and a few new DVDs (HP Officejet 6500 has more) past, but more brand new DVD and DVD written on the same computer is not detected.   Those who lack of DVD also will not autorun on my PC.  These same DVD which failed on my PC is read fine on my old Windows XP laptop.

  Strongly suspect one slightly out of the drive of alignment that must be replaced.  Ideas before ordering a replacement?

  Hello

  Check the automatic run settings in the control panel. Ensure that the measures to be taken when optical media are inserted represent the media format type that you create.  You can check the box at the top to use AutoPlay for all media types, then select the action for the particular media format.  Be sure to save the changes.

  You can also consider using Imgburn to read and write to check some media to see if you actually have some hardware issues. ImgBurn will also appear to what types of media are acceptable for the optical drive.

  It is also possible that the media you use is of a lower quality.  I prefer the Verbatim. It cost more but I've never had a problem with Verbatim.

  If your PC is under warranty then contact HP support. HP support number is 800-474-6836 or 800-HPINVENT or online here.

• Hi I godt 2 Questions: 1) my Adobe PhotoShop elements 10.0 for MAC cannot read taken with the new Canon 7 d Mark II camera RAW files. (2) my Photoshop Elements changed from Danish language of German language, how do I put this back?

  Hi I godt 2 Questions: 1) my Adobe PhotoShop elements 10.0 for MAC cannot read taken with the new Canon 7 d Mark II camera RAW files. (2) my Photoshop Elements changed from Danish language of German language, how do I put this back?

  1. you have cr 8.7 or better: use the dng converter or upgrade your pse in v. 13.

  2 mac App Store version is German. Photoshop Elements

• The product key label is worn and missing two numbers. How can I get back them so I can re - install the software?

  missing numbers

  The product key label is worn and missing two numbers. How can I get back them so I can re - install the software? The hard drive broke down.

  Thank you.

  How to identify, locate, and replace a product key
  http://support.Microsoft.com/kb/811224

• Cannot install and update the apps store of windows 8

  Cannot install and update the apps store of windows 8. When I click the button install is not install only loadin. Plese help me.

  After trying all suggestions from several sites, I found that the problem is that the Firewall window must be running in order for the applications to install.   If you are running Windows 8 Pro, go to the desktop and click on "My computer" and double click on 'manage '.  In the window on the left side computer management, expand "Services and Applications".   Click on 'Services', in the Center window, scroll down to "Windows Firewall" right click on "Windows Firewall" and click "Properties".  If the Startup Type is "disabled", click to drop down and select "Automatic".  At this point, you can click on 'Start' under the service status.  Once the Windows Firewall is started, you should be able to start installing and or update your apps from the app store.

• I can't install software to windows 7 using the windows vista product key

  In our firm, we use windows vista OS of PC licensed. can I install windows 7 OS with licensed windows vista product key?

  Hello

  No, you cannot use the PK of Vista to install Windows 7.

  @@@@@@@@@@@@@@@@@@@@@@@@

  Windows 7 is not free; you have to buy.

  Microsoft sells more Windows 7; Try Amazon.com.

  @@@@@@@@@@@@@@@@@@@@@@@

  This offer is free years; long expired.

  How does the Windows 7 upgrade Option?

  The Windows 7 upgrade Option is available through participating PC manufacturers on some PC and Microsoft on any purchase of packaged product Windows Vista. The Windows 7 upgrade Option applies to Windows Vista Home Premium, Business and Ultimate editions. Your upgrade to Windows 7 will be the comparable version: so you will get either Windows 7 Home Premium, Windows 7 Professional (upgrade to Windows Vista Business) or Windows 7 Ultimate, respectively. The Windows 7 upgrade Option program works on June 26, 2009 through January 31, 2010. Some manufacturers may choose to shorten the time of upgrade Option.

  @@@@@@@@@@@@@@@@@@@@@@@@@

  Before purchasing Windows 7, follow these steps:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  See you soon.

• I can install windows 7 using the windows vista product key?

  I can install windows 7 using the windows vista product key?

  I can install windows 7 using the windows vista product key?

  Hey angelside

  None

  You cannot install windows 7 using the vista product key

  You can buy windows 7 and then you will get the own product key windows 7 install

  read the windows 7 price microsoft below link

  http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102

  Walter, the time zone traveller

• Is my Windows my product key license? Also, if I want to download the iso of Windows 7 yes I need to buy a license/product key of Windows 7?

  Is my Windows my product key license? Also, if I want to download the iso of Windows 7 yes I need to buy a license/product key of Windows 7? Or my Windows 10 will work?

  Your license is the product key.

  You don't need to buy a license if you already have a product key.

  Step 1: Download a copy of Windows 7:

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  Step 2: Perform a custom installation, see Windows 7 section of the following article how to perform a custom installation:

  How to: perform a customized Windows installation

  Step 3:

  http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

  You can also use your Windows 7 product key to install and activate Windows 10:

  How to install and activate Windows 10 using your Windows 7 or Windows 8 product key

  If you have problems with activation:

  Activate your Windows 10 license with Microsoft Chat support

• Need to create a back-up of installer of windows 7 on my drive flash, but because the site does not accept my product key

  Original title: product key error Windows 7

  Hello!

  I need to clean my office completely. However, I had installed on this PC by a company, with that I can't connect, and the windows Web site does not accept my product key. I create a back-up of installer of windows 7 on my flash drive, but because the site will not accept my product key, I can't do it.

  Any help?

  Step 1: Download a copy of Windows 7:

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  Step 2: Perform a custom installation, see Windows 7 section of the following article how to perform a custom installation:

  How to: perform a customized Windows installation

  Step 3:

  http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

• After the system restore, I get "windows vista product key you typed is invalid for activation.

  I had to do a system restore a few weeks, now I start and get the message "the windows vista product key you typed is invalid for activation" but he worked for 4 years. now HP tells me I pay $ 130 move to 7 since vista is old.

  Hello, Phindude13,

  ) Click the Start button

  (2) type: slui.exe 3 and press the Enter key

  (3) enter the product key from the sticker on your computer

  4) click on the next button.

  (5) you will be asked if want to enable, click ok

  (6) it will attempt to activate over the Internet and will return an error of invalid key (it of ok, go to step 7)

  7) click the Start button

  (8) type: slui.exe 4 and press the Enter key

  (9) select your location from the menu drop-down and click on the next button

  (10) the next screen provides the number to call to activate by phone

  NOTE: when you call this number, you will first hear an automatic voice who will try to activate Vista for you. If the automated voice gives you an option to speak to a representative of Activation Live, select this option. If this is not the case, do not enter all the numbers. This should force the voice automated transfer you to a Live Activation Rep. trying to activate through the automated voice will not work, in your case, your Activation will be successful only through the Live Activation Rep.

  Once completed, you may need to restart twice.

• Have been using Windows Vista laptop for 4 years and it is all the time telling me that my product key is not valid and I can't turn it back on.

  Laptop in use 4 years now, is not a valid Windows VISTA product key not start browser button happens PAGE NOT AVAILABLE

  normally web access through verizon air card can't get here

  original title: valid product code (Vista)

  Hi James,

  1. What is the exact error message you get when you try to activate?

  2. do you get any error codes?

  3 remember to make any hardware or software changes to the computer before this problem?

  You can read the following article and check if it helps.

  Error message when you try to activate Windows Vista: "an error has occurred."

  For more information, you can also consult the following articles:

  Resolve activation problems

  A list of Microsoft Knowledge Base articles is available to help you troubleshoot the error codes and error messages may be displayed when you try to activate Windows Vista

• My laptop was stolen, but I have the Windows 7 product key. Can I disable it?

  PLEASE, DO NOT RESPOND WITHOUT HAVING READ THE FIRST POST! IM NOT ASKING IF I CAN TRANSFER THE PRODUCT KEY ON ANOTHER COMPUTER! My laptop was stolen, but I have the Windows 7 product key.  Can I disable Win 7 for this laptop so they can not use it?  I don't want to transfer the product key on another computer, nor am I asking questions on the follow-up to the computer I bought a computer brand new with a perfectly good copy of win 7. I just need to disable the old key so that they get the Windows 7 is not geniune message and can not get updates.  Furthermore, I have a proof of purchase (original receipt from reception and cc) and entered it in the original box.

  IM NOT ASKING IF I TRANSFER PRODUCT KEY ON ANOTHER COMPUTER!

  IM WONDERING NOT IF I CAN FOLLOW USING THE COMPUTER WIN 7 PRODUCT KEY!

  If you know the correct product key, you can block the user in use- but it won't stop them reformatting and reinstalling using recovery disks from the manufacturer to reinstall using the OEM_SLP key - and it would also prevent your use your laptop must be returned.

  You must contact one of the centers of activation and inform them of the keys and the circumstances.

  They will then issue a global block on the key (which can take a long time) which will result in any attempt to validate or activate any system with this key, which gives a non-genuine message on the desktop - it will NOT prevent the use of the system, and it will NOT stop the user both take steps to steal the data and/or reformatting/reinstall.

  Also note that the key on the COA sticker on the case of the machine is not normally the one in use,- and if the key OEM_SLP is still in use, MS can take no action at all, as thousands of others would be affected.

• Not able to activate Windows 7 get "the product key you have entered does not seem to be a valid Windows 7 product key.

  Original title: the product under the asus laptop key

  Hello

  I have a problem to activate windows using the product under my laptop key. He says "the product key you have entered does not seem to be a valid Windows 7 product key. Help me solve this problem.

  0xC004F050 usually means that you have misinterpreted a character - or G/C/6 and 8/B or Y/V are the most common, an O/0 is almost always a Q

  Please note that the following characters cannot be used - A E I L N O S U Z 1 0 - so don't bother trying unless you like noise it does :)