Cannot read some burned DVD SD-R2212

Similar Questions

• HP CDDVDW TS - T633P SCSI CdRom - cannot read SOME DVD

  PC is a Touchsmart 600-1000 t, Windows 7

  DVD Player cannot read some DVD.  Completed all the 8 steps in "Drive cannot read disks (Windows 7)" on the HP site.  A ran HP "Hardware Diagnostic Tools" (linear CD search Test"and it passes on some DVDs and returns"No Media"on the other.)  Very old CD "Office for WIndows 95" and a few new DVDs (HP Officejet 6500 has more) past, but more brand new DVD and DVD written on the same computer is not detected.   Those who lack of DVD also will not autorun on my PC.  These same DVD which failed on my PC is read fine on my old Windows XP laptop.

  Strongly suspect one slightly out of the drive of alignment that must be replaced.  Ideas before ordering a replacement?

  Hello

  Check the automatic run settings in the control panel. Ensure that the measures to be taken when optical media are inserted represent the media format type that you create.  You can check the box at the top to use AutoPlay for all media types, then select the action for the particular media format.  Be sure to save the changes.

  You can also consider using Imgburn to read and write to check some media to see if you actually have some hardware issues. ImgBurn will also appear to what types of media are acceptable for the optical drive.

  It is also possible that the media you use is of a lower quality.  I prefer the Verbatim. It cost more but I've never had a problem with Verbatim.

  If your PC is under warranty then contact HP support. HP support number is 800-474-6836 or 800-HPINVENT or online here.

• A 'ATAPI DVD A DH16A1L"installed in my computer DVD cannot read or write DVDs

  A 'ATAPI DVD A DH16A1L"installed in my computer DVD cannot read or write DVDs. Please help me solve the problem.

  Your question has been moved to a more appropriate forum. Please provide more information.

• Windows media player cannot read CDs and DVDs

  MS supports says my Player DVD is dead and needs a new drive. So, I just install a new ROM DVD and still have the same problem - cannot read CDs and DVDs.

  When I play the CD, I always get the error meessage--(lecteur Windows media a rencontré une erreur lors de la lecture de lecteur de CD en mode numérique...). 'Digital' is selected under the tool-> properties-> device.

  When I play DVD, it is frozen my laptop or keep spinning and froze the Windows Explorer and the reader.

  I was able to read DVDs and CDs once after a few restart. During playback of CD the WMP abruptly stopped with error message and since that time cannot play CD DVD & more.

  So far, I did a few fixs that I found online and nothing wroks:

  * No upperfilter or UpperFilter registry

  * Uninstall and let the laptop automatically reinstall the driver

  * Ms. Fix it gives different results every time I run the fix-(1) detects no problem and therefore no patches have been applied (2) the main media in the CD drive is not readable (same CD has played correctly when using external USB DVD rom)

  Can someone help and let me know what that could be the problem and how to fix it! Thank you!

  Hi Amy,

  You can read the following article to clear the Windows Media Player database and check if it helps.

  You cannot view, add, or delete items in the library of Windows Media Player 11

  If you have any third-party media player installed on the system, then check if the DVD player works with it.

• HP BD ROM BC 5541 H cannot read a CD / dvd

  Hello

  HP BD ROM BC 5541 H cannot read a CD / dvd.i had try Microsoft Fix it & sfc/scannow, Scan result (windows resource protection has not found any breach of integrity).  Uninstall then device from Device Manager and install new, State of the Device Manager ("this device is working properly").

  Please help me... How to diagnose or fix?

  Kind regards

  

  

  Hello.

  BD Rom problem solved Finally, today, I've cleaned the lens of the drive with the Air blower (blow air from different angles) & drive to start working.

  Kind regards

  ,

• Toshiba DVD - ROM SD-M1612 cannot read a burned disc

  Hello

  I have a problem. I wonder if anyone can help please.
  I tried to view a DVD-R on my pc using my dvd player which is a Toshiba DVD - ROM SD-M1612, but it keeps giving me the same error message:
  Windows cannot read from the disk, it is may be corrupted or in a format that windows recognizes.

  The disc was burned on another computer and plays very well on this and on a normal dvd player, so I excluded that the disc is damaged.
  After talking to some people, they suggested me update called firmware?
  I looked at this and can't find it anywhere on Toshibas support or downloads pages feel like looking for a needle in a haystack :)

  I have provided this figure as it apparently is the firmware that is currently installed on the pc.
  I wonder if anyone knows where I can get the current version and if it will help me perhaps discovered the burned DVD-R.
  TOSHIBA_DVD-ROM_SD M1612___1806___\5&C21666E&0&0.0.0

  Thank you for your time and help

  Derek

  Hello

  Sometimes this happens to me also, and to be honest it's nothing unusual.
  All CD or DVD is supported by the CD/DVD drive.
  I put t know what laptop you have, but in most cases the user's Guide provides information and details on the mids compatible and taken in charge.

  I ve experience with TDK CD and DVDs and I convinced Mr. I ve tired different CDs and DVDs from various manufacturers and all were not entirely compatible.

  The update of the firmware is not always a solution, but it is sometimes useful to improve compatibility. The update of the firmware can be downloaded from the Assembly of the computer.
  It seems that Toshiba provides updates of the firmware for the series of notebook clean on the European driver Toshiba page.

  To cut a long story short, try a few different CD or DVD from different manufacturers and check what support is no longer supported.

  Good bye

• F20-136: sometimes by car cannot read some CD or DVD

  Hi all

  I just bought a F20-136 and make me "event ID 11, category: CDROM ' errors in the event viewer. It is a mistake of the controller. The drive seems to read most discs, but sometimes it has trouble reading some discs and that's when the error occurs (this can happen with CD or DVD, pressed or burned).
  I also burned an image on a DVD-R which reads OK on the laptop but not on my desktop DVD. This laptop has the Mat * one years UJ-840 SuperMulti Drive.

  This sounds like a hardware problem?

  Hello Gary

  It is not easy to tell if there is a hardware problem. Your device is a new and, if there is no possibility, trying to contact the partner Service of your country. Explain the problem and let check the drive correctly. If there is a power outage, the warranty will cover the replacement costs.

  Good bye

• Optiarc DVD RW AD - 7560A ATA DEVICE cannot read the PC DVD - ROM.

  I have sony vaio VGN-NR38S. It has a Optiarc DVD RW AD - 7560A ATA DEVICE.

  A few days ago I bought a DVD of driving test. I can't use this DVD in my laptop.

  I tried this DVD in other laptops and it works perfectly, but when I insert in my laptop, it says "Please insert the disk".»
  could someone help please.
  Thank you.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  =======================================

  As needed check with the Sony Support, their drivers and documentation online and ask in their forums
  on the problems known.

  Sony - Contacts
  http://eSupport.Sony.com/us/Perl/contact-land.pl

  Sony - drivers
  http://eSupport.Sony.com/Perl/select-System.pl

  Sony - Support
  http://eSupport.Sony.com/

  Sony - Forum
  https://Forum.sel.Sony.com/?XID=M:Showcase:eSupport

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Satego X 200 - 21 d: drive DVD TS-L632D is not read and burn DVD-R DL

  Hallo,

  I have problems with my DVD SATEGO X 200 - 21 d
  TS-L632D read a burn only DVD-R DL discs.
  I contacted Toshiba support via e-mail and asked
  for a new disk firmware, but the answer did not solve my problem.

  There are only updates in the download area of toshiba,
  but not for my car model. I can send my laptop
  for the money to a service partner, to check this problem.

  I do not understand this! I bought a laptop upscale
  for 1,700 EUROS and there is no support for the update of the firmware
  available to solve problems with newer drives?

  If I get this problem in the WEB, there is an a large number of
  questions and problems with playback and engraving
  Discs DVD-R DL with this drive model!
  How is it possible?

  I hope for some advice to get an update of the firmware player
  to solve the problems of reading and writing DVD - R DL discs.

  Janni J. Gettings of Germany

  Hello

  I found the update of the firmware on the European driver Toshiba page!

  Satego X 200 - 21 d seems to belong to the PSPBEE and the Toshiba page provides the update of the firmware to TO02.
  It s for the TS-L632 reader.

  But generally not all CD or DVD of all manufacturers is fully supported.

  My knowledge of the user manual should provide a details and info on compatible and tested media.
  Using recommended media, you can be sure they will be compatible and will work 100%.

  Greetings

• Qosmio F30 - 112 - DVD player can read and burn DVDs

  Hey everybody!

  Here's the problem: my DVD-ROM won't read some DVDs, it does not burn. In Nero when it start burning error pop up and the message is: Power calibration error

  I tried with all the testers for writer and reader of alerady and they all did not find any problem. They said that the recorder and player work properly. I even reinstalled twice end it always shows me this error and it will not burn or read some DVD Windows Vista (which I tried to read another computer and there is no problem). I tried to clean it with cleaning and nothing.

  I think that this problem started since I've updated the firmwire F103, but I do not know...

  Help please.

  Hello!

  Was the update of the firmware of your CD/DVD drive or have you another one? In my view, the drive could be faulty due to a bad firmware

  But before you exchange the drive, you should try to remove the upper and lower filters in the Windows registry:
  (1) start Regedit (start-> Run-> Regedit)
  2) go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  Good bye

• Windows 7 and other programs cannot read or burn cddvd

  My system not usually read or burn on my cddvdw drive. I'm on a Toshiba Satellite L500D with a TSST TS-L633C, and after I had these problems I installed Toshiba DVD player as well. From Toshiba DVD player can play the discs very well! Nothing else will accept that there is a DVD in the drive ~ including Windows applications and Microsoft themselves. Until I start to play using the DVD from Toshiba drive, the disc in the drive is simply the drive "hunting" or at least that's what it looks like.

  I noticed in "Device Manager" this drive has now two drivers that are associated with ~ the pilot Windows and a pilot separated for the reader to DVD from Toshiba. NOTE: This player has been installed AFTER that I started to have problems.

  At some point I uninstalled all CDDVDW drive altogether and rebooted the system. Windows recognizes that I had 'new device' and installed his "pilot new as well as the driver Toshiba DVD Player as well. Still no joy in the use of this unit with anything other than Toshiba DVD Player.

  Here, anyone has any new ideas?

  PS: I ran the Fix Tool from this site with no results!

  Rock 'n' Roll-live!

  Hello

  "A DVD will be recognized by the Toshiba DVD player, but by nothing else in any OS I
  on this system. (I have Vista, Windows7, and PCLinuxOS tri-boot.) »

  ---------------------

  Since the 3 operating systems fail to recognize the drive correctly I think that the problem is hardware related.
  drive speed, wiring, circuits on the motherboard. Or the real player has a problem. This isn't very
  likely that all 3 OS developed a similar problem at the same time, it's why the only things remaining
  are the material and the reader. Check the BIOS, although given that it could have been written a glitch
  in it.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Cannot read CDs and DVDs on satellite C660

  Hello

  I bought my PC laptop Toshiba Satellite C660 in December 2010.

  I was not able to play any CD or DVD.

  I checked on the properties of Media Player and found that the driver had been disabled.

  I know not how get the laptop to read CDs and DVDs, does anyone know how or why this happened? Is - this rare?

  Thank you

  Natsophia

  I do understand that with the driver disabled.
  Optical drive is listed in Windows Explorer?

  If you can't find it listed in the Device Manager and if it is in the unknown device list try this please:
  http://APS2.toshiba-tro.de/KB0/FAQ8101LA0000R01.htm

  It is described as a Vista but there the same should be under Win7. Please try it and send feedback.

• Cannot read some of the numbers on my Windows XP product key label.

  I NEED TO RELOAD MY WINDOWS XP OS ON MY DELL MINI 10.1, BUT FOR SOME REASON DELL THOUGHT IT WAS A GOOD IDEA TO PUT ON THE BOTTOM OF THE NETBOOK AND HAD TO BE WORN OR USED THAT I CAN'T READ SOME OF THE NUMBERS. ANY IDEAS?

  original title: Can not READ SOME NUMBERS ON DOOR LABEL COA

  Lost or misplaced product key (certificate of authenticity)
  http://support.Microsoft.com/kb/824433

  How to get a replacement product key?
  To replace a Microsoft product key, you must contact Customer Support and Microsoft. To locate the phone number, visit the following Microsoft Web site:
  http://support.Microsoft.com/default.aspx?scid=fh; EN-US; CNTACTMS

  For more information on this topic, visit http://support.microsoft.com/kb/811224

  You probably want to contact Dell on this topic too. Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• "Reading and burning DVDs in Windows 8.

  Just recently my uncle died, after 76 years, and a DVD were made from photos of his life. I don't have a DVD player. So when I got a DVD in the past (with windows 7) I was watching it on my computer. And if I had a family DVD I would like to make copies for guard duty, I would burn it... Just recently, my old computer with windows 7 past as well. So I bought a new a Windows 8 and found that it will not play or burn DVDs. What can I do? And if I have to upgrade, I would do it with a program/system that is compatible with Windows. I don't have a lot of money through autour, but I don't want for a free system and take the chance of getting malware or virus... Help, please. What is the best program/system for windows 8, which will play and burn DVDs?

  For DVD player, you need to just install K-lite codec pack, then you can play a DVD with windows media player on your windows 8. No need to buy anything.

  For DVD burning, I would recommend you convertxtodvd , works well on windows 8, safe and easy to use.

• CD/DVD combo cannot read some discs - Satellite 1900

  Hi I have a 1900 satellite and I have a problem with my cd burner and my dvd player, my dvd player does not play all the same thow of movies, they all have the same area code and my cd burner, he shows that he has burned a cd, but then it is not read, it shows me that the disk is full , but when I see what he writes there is nothing
  Please help me

  [Edited by: admin November 5 05 08:28]

  Hello

  One of my friends had the same problem. He used the wrong or not compatible CD / DVD media. In my opinion you should try to burn difsferent CD / DVD. I use TDK CD and DVD and I m really satisfied.
  Secondly, what burning program did you use? I use Nero. In my opinion it's one of the best burning tools.
  Please only tick this option.

  Best regards