Cannot receive calls

Recently, I was not receiving calls from people or get a text saying I missed their call. Although this works very well when people in my contacts call me. Lately I've been turning 4G on but only my data instead of voice & data, so I don't know if this might be the reason why.

First try and reset your device. (hold sleep/wake and home 30 seconds button)

Then try and reset the network settings settings > general > reset > reset network settings

Tags: iPhone

Similar Questions

  • Phone says off cannot receive calls all the ok.how else do I turn on.

    You can call off the coast to receive calls, everything else works. How can I re set up to make calls. ?

    Check with your provider, maybe you have a faulty SIM card.

  • IPhone SE cannot receive calls

    My Iphone SE just bought 2 days ago may not receive most of the calls, I send back to the city of mac, they replace a new iphone for me but to keep problem. I then contacted my provider, changed my sim card, but the same problem to continue. Any solution?

    If you use LTE, have you tried to redefine the parameters of cellular network on E or 3G and see if you can receive calls?

  • BlackBerry smartphones cannot receive calls or to unlock texts after ebay

    I have a Blackberry 9500 Storm locked to Vodafone and recently bought an unlock code on Ebay to use on my Orange sim card.  After having followed the steps to unlocking the phone accepted the orange sim and shows "safety".  But I can't use the phone to make and receive calls and texts.  I checked network settings and they show in orange.  I contacted the ebay seller, but they just said SIM active check - that it is.  Anyone got the answer?

    Thank you

    Kate

    I tried another sim Orange and the same problem - two sims work fine in other phones btw.

  • CISCO SPA122 with Skype, makes calls but cannot receive calls!

    Configured the SIP, channel and assigned phone Skype number to SIP, changed the password and set up; seems simple enough!

    The course calls work well, but can't call. Skype logs illustrate calls will the number and their transmission to the SIP.

    November 20, 2014,
    14:07
    From: + 16509954758+ 16509954758
    To: + 15594626288+ 15594626288 (transmitted: + 99051000254482)
    Incoming calls transferred $0.000 / min. 0:00

    0.000

    On the caller's phone, I can hear it ring twice then goes full.

    I tried to pick up the connected phone SPA122 during the call but only to get a dial tone.

    Any Suggestions besides communicating with Skype?  Tried 4 times and they are clueless!

    Configured correctly "resident number online? Read the Guide to the administrator for more information.

    Turn on syslog & debug and catch as well as SIP packets. It will help you (or we) to analyze your problem.

  • Cannot receive an outside call

    Hi all!

    We have such a problem. We have an infrastructure of control VCS, VCS Expressway and MCU. VCS Expressway has dual NIC option enabled; 1 LAN has an internal IP, LAN 2 - public IP address (without NAT).

    Two VCS are configured according to manual)

    ( http://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/config_guide/Cisco_VCS_Basic_Configuration_Control_with_Expressway_Deployment_Guide_X7-2.pdf), with the exception of the settings NAT and firewall - we do not have.

    When we call for our network internal (for example [email protected] / * /) to the Organization of foreigners ([email protected] / * /)-everything is ok. But we cannot receive calls from outside.

    An external DNS is also configured according to manual, domain name of VCE Expressway is external can be solved.

    You have any ideas what may be wrong? Thanks in advance.

    What exactly do you see in the newspaper of the network? Can paste you it here? (Be sure to hide sensitive information such as addresses IP, etc.).

    It does not appear that you have created the SRV records required, such as

    _h323ls._udp.

    _h323cs._tcp.

    _sip._tcp.

    _sips._tcp.

    at least I'm not able to look up one of these SRV from here.

    -Andreas

  • I can receive but cannot make calls from Mac

    Hello

    I try to have calls using my iPhone connected to my MacBook Air, but I have this message "your iPhone should use the same iCloud and FaceTime account.". This is something that surprises me because I can receive calls from my MacBook, but I can't make calls from my MacBook. There's someone who have / had the same problem?

    Thank you

    CO

    OS X El Capitan: use your Mac to make and receive phone calls

    Make calls

    FaceTime: Enter a phone number in the search field and then click the Audio button or click on Audio to see your recent calls.

  • Sony Smartband talk - cannot receive incoming calls

    Hello

    I recently bought Smartband speak only to receive calls without having to exit the phone out of the Pocket. However, have been fruitless so far. I have paired the device to my Samsung Galaxy S4, installed Smartband talk and lifelog apps on my phone. I get all my SMS / whatsapp notifications. However, when I called another number in order to test the functionality of appeal, vibrates my talking smartband and poster who called, but when I press the function key, then the screen just flashes but then nothing happens. Call guard ringtone on my Samsung phone. If I can take the call on my samsung phone, my smartband only shows that call is active with this issue, but is he's going. Is this something I am doing wrong. Someone in the forum mentioned Smart Dialer third-party app - can this solve the problem of not being able to take calls or y at - it an another third-party application that I can use. I tried restarted and re-pairing following the mentioned method (key simultaneously both volume and function) but that also has not solved the problem.

    solved... uninstalled the app from my phone, installed again, re-pairs between them and now able to receive calls.

  • BlackBerry Z10 URGENT: Please help... Cannot make or receive calls on Z10

    Hello

    I bought a Z10 a month ago. Updated as soon as the 10.2 was officially available and it worked perfectly. Tonight, however, I was on a call and suddenly the audio went. I tried to disconnect the call but it was not disconnect despite several attempts until I gave up and you press the power button to restart. Since I restarted, I can't make or receive calls. I'm trying to dial a number every time it shows immediately call ends. Also, I can not receive calls. I have the complete network and can do everything including surfing the web, sent text messages and BBM. What seems to be the problem? Please help because it's a little urgent

    When powered on press and hold the power button for 10 seconds, this resets the phone.

    You can also remove the battery for a minute, if the above does not work.

    This does not sound like a network problem, to have that full signal does not mean that you will be able to connect if the network traffic is high or you are being faced with a different tower. Call your provider if the problem persists.

  • BlackBerry smartphones cannot call or receive calls

    Hello

    I have the following problem and hope someone can help me with it:

    • Since yesterday my phone don't make me call or receive calls. In both cases, I get a "call failed". I see a connection activity in the upper right corner in both cases.
    • I use a prepaid card of Fonic/O2 where I can ask my balance by "call" * # 101. Normally it takes a few seconds to get the balance, now it takes much more time. Now, often even, I don't get my balance, but a "supplementary service error: General error:
    • I am still able to send text messages (but there was also a message that could not be sent).
    • Receive any text message does not seem to work.
    • A Wi - Fi connection works as usual.
    • When I put my sim card in another phone, everything works perfectly fine.
    • I was not trying to put another sim card in my blackberry.

    My data :

    • Carrier: Fonic/O2 Germany (without option bb)
    • Phone: BlackBerry Bold 9780

    I hope that there is anyone having a clue!

    Thank you very much!

    bbbcf

    Thanks for your reply. The problem was the signal Tower. I think that my provider has resolved the problems on their own... Thread can be closed.

  • can send but cannot receive e-mail

    Have 2 comcast email accounts. 5 days ago, that both has ceased to receive emails through Thunderbird on my laptop. They work on the comcast site. As if by magic one of the email accounts started getting yesterday - no problem.

    The other is still "stuck" and DO NOT receive emails via Thunderbird on my laptop; I can send emails without problem. Of course, it's my main email account. Comcast checked the settings and could find no problem on their end. Gave me that a number of their center of insurance of security but so far cannot get them to take my call. sigh seems strange to work and the other does not; essentially same settings for both.

    Help appreciated.

    This would indicate that the problem is at the end of Comcast.
    You can check this article well.
    https://support.Mozilla.org/en-us/KB/cannot-receive-messages

  • Unable to receive calls from Apple Watch, using WIFI AT & T calls, when the iPhone is turned on, turned off or in Airplane Mode.

    I work on this issue and wanted to involve the community.

    I have tests the functionality Apple Watch and have been unable to solve my problems with WIFI call. I use the AT & T and I am connect to the strip of the 5 GHz on my router Xfinity.

    I am able to make/receive calls from my iPad and Mac laptop when iPhone is off / Mode plane; However, this feature does not work on the watch. I can make and receive calls from the watch when the phone is turned on.

    Another problem is that I am not able to send and receive messages (blue or green bubble) of the watch - once again when the phone is turned off or in flight Mode

    I'll copy in 2 portions of the Web site: http://help.apple.com/watch/

    http://help.Apple.com/watch/#/apd0443fb403

    If your Apple Watch is in range of a Wi - Fi network that the iPhone is connected to before, you can always do the following (even if the iPhone is off):

    • Send and receive digital messages Touch
    • Send and receive messages using Messages
    • Make and receive phone calls (if you have active calls, Wi - Fi, and you are within range of a Wi - Fi connected to your iPhone before)
    • Check current weather conditions
    • Track your inventory

    http://help.Apple.com/watch/#/apd2fe746e86

    Make calls via Wi - Fi

    If your cellular operator offers Wi - Fi calls, you can use Apple Watch to make and receive calls over Wi - Fi instead of cellular network - even when your pair iPhone isn't with you or is disabled. Apple Watch comes to be in range of a Wi - Fi network that is connected to your iPhone in the past.

    To see if your carrier offers Wi - Fi calls, see the article Apple Support phone with Wi-Fi calls, then enable the calls on your iPhone and Apple Watch Wi - Fi.

    Note: You can make emergency calls via Wi - Fi, but when possible, use rather iPhone over a cellular connection - your location information will be more specific.

    Enable on iPhone Wi - Fi calls. On iPhone, go to settings > phone and turn on Wi - Fi calling and application to other devices.

    Enable calls on Apple Watch Wi - Fi. Open the Apple Watch app on iPhone, tap My Watch, tap phone, then turn on Wi - Fi calls. If you do not see the parameter, make sure that you have activated calls on iPhone Wi - Fi.

    Answer please if you are able to perform any of these functions! And any troubleshooting you can think!

    AspiringAppleGuru wrote:

    I have... to connect to the 5 GHz on my... router bandwidth.

    Hello

    These features are not available because Apple Watch cannot connect to a network of GHz Wi - Fi 5.

    If your watch is not connected to your iPhone via Bluetooth, but lying in a 2.4 GHz Wi - Fi network your iPhone plugged in before, the watch can connect to this network and you can continue to use certain features, including Wi - Fi calls (when it is supported by your operator, you already have in place).

    More information:

    On Bluetooth and Wi - Fi on Apple Watch - Apple Support

    Use Apple Watch without her sister iPhone - Apple Support

  • iPhone 4s were wet. Now, everything is back to normal EXCEPT is not make or receive calls.

    iPhone 4s were wet. Now, back to normal EXCEPT will not send or receive calls. Constantly to "research".

    WHPDVM wrote:

    iPhone 4s were wet. Now, back to normal EXCEPT will not send or receive calls. Constantly to "research".

    Then, it is not back to normal. If the device cannot get a cellular connection, then you have to check with the carrier and to replace the SIM card, because it could have been damaged when the device got wet, or the appliance is damaged to the point that it won't work. If a cell phone cannot make or receive calls, it is far from normal.

  • Receive calls from iPhone 5s does not

    Hello

    Just got a Apple Watch for woman (a little), paired with the iPhone 5 s - everything worked out of the box but receiving calls/text. No matter what try (rematching, force reboot, quite all applications on the phone, WiFi stop on other devices etc.) I don't get the call (or text) on the watch from the phone. If I go to the app phone on the watch, I see the missed (or received on the telephone) call, msg etc.

    Not paired and matched, he returned with my iPhone 6 and everything works fine. So, this is something that I can't do with the iPhone 5 s at all? None of the documents I have read so far, are not specifically told that it cannot however. 5 wife and my 6 all running iOS last 9.x. Can anyone confirm or put me in the right direction please?

    Best,

    San

    Settings - Phone - calls on other devices - rocking on IT

  • Can send emails, but cannot receive the get Mail error ID: 0x8DE00002

    Original title: Windows Live mail

    First timer. Windows Live mail. I can send emails but cannot receive them. The following error occurs;

    Can't send or receive messages on behalf of Hotmail.co (rosspriory).

    Server error: 4402
    Server: 'https://mail.services.live.com/DeltaSync_v2.0.0/Sync.aspx '.
    Windows Live Mail error ID: 0x8DE00002

    Unlike what the error message says, I can send emails. Only, I don't get all using Windows Live mail

    I can access the web version and it sends and receives e-mail messages. But I find the flaky web version, to say the least.

    My only problem is how to find my way in this forum?

    Do not laugh!

    Server error: 4402

    This error is often associated with folders created by the user. I seem to remember that a user facing this error discovered that he had reached the upper limit on the number of files. Is this possible? There is a maximum number of folders created by the user regardless of the nesting level, and I think it's 128. Otherwise, check that the files that you see in Windows Live Mail are identical to those that you see at http://mail.live.com. If you have recently added a folder, empty it by moving its contents into a folder under storage folders, and then remove it.

    The program log shows where the error arises. Registration is enabled on the page of Maintenance program options, you can get to by pressing Ctrl-Shift-O for Options when displaying your message list. You will see the button of the Maintenance on the Advanced tab and logging for the different modes is selected at the bottom of the page. The newspaper itself, it's a text file called WindowsLiveMail.log and he lives in the root of your storage folder. The location of this folder is given under the storage folder on the same maintenance page.

    You will later need to remove Windows Live Mail account, and then add it again back to restore the synchronization between the client and server relationship. Because this may involve a lot of re - download messages, this is the last resort. He might have to wait until your account has been reset to the level of the server, which would require the intercession of a support worker. Let's try the less memorable potential remedies first.

    I don't think that repair or uninstall and reinstall the program will have any effect on this server error.

Maybe you are looking for