Cannot recognize the SDHC 4 GB card

Similar Questions

• T430s card reader cannot read the SDHC 16 GB card

  My t430s cannot read 16 GB SDHC card that I use in my camera. Card is formatted in FAT32. Additional audit, the ricoh card reader, that I tried to put a 4 GB SDHC card and he was able to read, so I guess it's a driver issue I would be solved since the card reader is advertised as compatible SDXC, so it is not sensible for it is not not able to read a SDHC 16 GB card.

  I tried to install the latest driver for it on the lenovo support site and windows says new drivers are already installed.

  
  

• Satellite Pro U500 - 18 k cannot read the SDHC 8 GB cards plus

  Hi all

  My stops U500 - 18 k read the SD card. What SD card SD icon Windows explorer see, but when I am clicking on the icon, to get the message 'Please insert a disc in SD (J) '. I tried to read the 8 GB SDHC cards. The maps are certainly working. With MMC and XD card reader works well.
  I reinstalled utilities SD and card controller driver Richon. This does not solve the problem. OS Win 7 x 64. Any ideas?

  Thank you.
  Rytis

  Are you using this SDHC 8 GB card for the first time?
  Have you noticed the same situation using different SD cards?

• Cannot complete the SDHC 8 GB card

  Greetings to this forum.

  I'm having a bit of trouble and would be grateful for any help.

  A couple of months, I bought a 8 GB rocket and a PNY Micro SD card. The card does not increase the capacity at all. I do not attack the problem at the time.

  Yesterday, I went to Costco, as they had the 8 GB model to $59. (A thought in the drawer of my desk at work would be nice) I also bought a 8 GB SanDisk MicroSDHC card.

  Same problem as the other device. I can't use the supplement 8GB I have installed.

  I tried to load my entire collection of WMP files on it. The ability failed in 7. ? F. I tried to format the card with a USB drive without success. The reader is SDHC days.

  .

  Go to settings/system/settings/Info, I get:

  Version V02.02.26A

  7548 MB memory

  Free 7336 MB

  SD Card 7572 MB

  Songs2253

  Voice recordings 0

  All others listed 0

  I did other research positions, but can't find anything similar.

  I'm using MSC mode and drag and drop on a USB hard drive.

  Under my computer, I see the Sansa fuse with 7 properties. ? GB and as a removable 7.8 GB drive

  I am running XP SP3 on an old Celeron for a few years. My laptop is a Celeron so with in the same way.

  jbrown says:

  Thanks for the reply, but I'm not explaining myself properly.

  I have 8 GB internal memory, as well as the 8 GB card. I should be able to load 14 + GB on the "rocket".

  I also put the card into the adapter to unlock. It made no difference.

  Sorry for my poor explanation.

  Thanks again for your response.

  You try to load the map while it is in the drive or in the "rocket"? The other thing is it must load as two separate entities when you drag - move. Tell your rocket is drive J:, then the card would show as drive K:. .every half must be charged regardless.

• I am running Vista Home Premium 32 bit and cannot read the SDHC 4 GB memory card

  I am running Vista Home Premium 32 bit and cannot read the SDHC 4 GB memory card, it worked in Fujitsu siemens but not now. Can anyone help in laymans terms not techno type talk how I can fix it.

  I'm a model so need to step by step instructions: o))

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  Method 1:

  I suggest to test the card by inserting it in a different USB port and later in another computer to test and check if it is detected.

  Method 2:

  I also suggest you to check if the memory card is detected by a different card reader.

  Method 3:

  I suggest you to see link and check if it helps:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

• Tecra M9 does not recognize the SDHC 4 GB

  Tecra M9, Windows XP

  The internal card reader does not recognize the SDHC 4 GB (provider: "extreme memory"), being inserted in camera or PNA not connected via USB, no problem to read or write to the card.
  No idea how to get the card to work with this card reader?

  Hello

  I have an idea.
  I think that the SDHC 4 GB card is not recognized because a Microsoft patch is not installed on your XP operating system.

  Microsoft has released this document which should help you to solve this problem:

  [Hotfix for Windows XP that adds support for a capacity of more than 4 GB SDHC cards | http://support.microsoft.com/kb/934428]

  Good bye

• My Satellite A300 cannot recognize the buttons at the top of the page

  I + re-inistalled windows vista and installed everything. They work fine except the buttons that are located above the keyboard. I know that I can verify their status in all programs > Toshiba > utilities > Toshiba Assist, but the problem is that the my notebook cannot recognize the buttons.

  I installed all the software for each hardware but still cannot use the buttons...
  What should I do?

  Have you used the recovery disk when you installed Vista?

  If this isn't the case, you must download and install the Package of added value, which can be downloaded from the Web from Toshiba site in the section support/drivers.

• If I enable security on an ad hoc network, my Windows 7 client cannot recognize the network at all.

  XP host and client windows 7 on ad - hoc network...
  Dear friends, I have set up an ad hoc network between two laptops. The host is running on xp sp3 and the client is running windows 7.
  Now the problem is that if I enable security on the network, the client windows 7 cannot recognize the network at all.
  If I turn off security on the network ad-hoc, everything works fine and I can share files and access the internet on client... Please help

  Ok

  Now, I'm pretty sure that I understand your game up. Well done to get the internet connection, sharing of work (not a simple process) but without encryption.

  I am sure that the problem lies in the Windows 7 laptop (laptop 2). When you switch cell 1 to WEP, you must also pass portable 2 to WEP and provide the WEP key you have configured with laptop 1.

  It's getting late here now, but I'll try to answer tomorrow after I have test it on my two laptops to Windows 7. In the meantime maybe I can point you in the right direction...

  • Right-click the the small icon at the bottom right of your screen on laptop network 2 and then click on Open Network and Sharing Center
  • In network and sharing Center, click on manage networks wireless (nearby at the top left)
  • Click Add, and follow the wizard to create an ad hoc network, selecting WEP and providing the encryption key you configured on the notebook 1
  • Save the network so that you do not have to repeat this procedure.

  Otherwise, when you get to manage wireless networks, if your ad hoc network is already listed...

  • Right-click in your ad hoc network, and then click Properties
  • Click the Security tab
  • Change it to WEP and provide the encryption key
  • Click OK

  Good luck, I will pick up this new after my drowsiness.

  Tricky

• Windows 7 cannot recognize the gt-19300 galaxy s3 driver

  I did a factory reset my Galaxy S3 GT-19300 but now windows 7 cannot recognize the device. Windows is unable to install the driver and it fails.
  Any suggestion is appreciated.

  See you soon,.

  Hello

  I suggest you to update the computer USB drivers and check if it helps.

  Note: Unplug all devices US waiting for the mouse and keyboard before performing these steps.

  (a) click Startand then click on Panel.

  (b) click system and Maintenance, click System, and then click on Device Manager.

  (c) note: If Control Panel is in Classic view, double-click Systemand then click on Device Manager.

  (d) If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  (e) in Device Manager, double-click to enlarge ""Universal Serial controllers Bus ", right click on the controller host, click"Uninstall"and click"OK"."
  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  (f) repeat step 2 to uninstall all the elements "Bus USB controllers'.»»

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  For more information, see the links below:

  Updated a hardware driver that is not working properly:
  http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Automatically get recommended drivers and updates for your hardware:
  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  I also suggest you to contact Samsung Galaxy Support and check whether they have all the drivers available for the gt-19300 driver Galaxy s3.

  Here is the link to contact Support in Samsung Galaxy: http://www.samsung.com/us/support/

• Tecra S5 does not recognize the SDHC 4 GB micro card

  Hello.

  I have a 4 GB microcard SDHC and the reader of my laptop does not recognize the card...

  Help.

  GR Arno

  Hello

  Are you sure that this laptop supports this type of card?

  As far as I know THAT these cards are compatible:

  Card SD - 8 MB - 2 GB
  SDHC - 4 GB card
  -16 MB - 2 GB xD Picture card
  Memory Stick - 8MB - 256MB
  Memory Stick Pro - 256 MB - 2 GB
  MultiMediaCard - 8 MB - 1 GB
  miniSD (with SD adapter) - 32 MB - 2 GB

  Only the SDHC card and not SDHC micro card is supported

  Concerning

• 5 d mk iii cannot recognize the card

  There has been recently a few good photos with my 5 d mk iiii allwent. Put the card in the reader and photos uploaded to the computer. Then put card back in camera tried to refomat and not go. message says cannot read the card or reformat. tried another card the same results. using lexar 32gig 1066 anyhelp

  Inspect the card (with card removed) Bay.  There are pins bent at the bottom of the card slot?

• Tecra M5-103 does not recognize the 4 GB SD card

  Hi - my Tecra M5-103 does not recognize my 4 GB SD card, could someone tell me if this size chart is supported in this machine please?

  Thanks in advance

  Hello

  I didn't find any official information on SD compatible card sizes for this laptop but I think that card 1 GB and 2GB SD could run without any problem.

  The 4 GB SD card is definitely not supported.

  If you want to use these huge sizes of SD card, you could buy an external drive of All in.
  These devices are not expensive and you can connect and use via the USB interface.

• Tecra S1: OS cannot recognize the CD Rom after hibernation or standby

  Hello world
  I have a problem with my laptop Tecra S1 and the operating system Windows XP Professional. My laptop can not recognize the CD ROM drive after hibernation modes or in sleep. And when I checked the status of the device, he told me this message "Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38) ». I tried to uninstall the driver and install it again, but it did not help. And if I restart the computer then the problem is solved but y at - it someone knows how to fix this problem without having to restart the laptop?

  Thank you very much

  B. regards
  Wael Devaud

  Hello

  Maybe this article can help you
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;316575

  Good bye

• Camileo S20 - my PC cannot read the 8 GB SD card

  I have a Camileo S20 Pocket camcorder, using a Kodak 8 GB SDHC card. I can't read this card using two Dell PC.

  I have a SDHC card reader and it can read a 4 GB SD card, card, but not the 8 GB card.

  Would it be the high definition HD format video and images that is the problem?
  If this is the case, what can download to fix this problem.

  Gary

  Hello

  I put t think that this issue has something to do with the HD format on the SD card.
  As you say, the 4 GB card can be used properly and the card of 8 GB does not work.

  So I think that the card reader is not compatible with the 8 GB SD cards.
  In this case, I recommend buying an external card reader what 8 GB support card that could be connected to the usb port.

  It could also be a problem with Win XP if you are using Win XP.
  In this case, you will need to upgrade win xp to the last State and need to install a patch http://support.microsoft.com/kb/934428/en-us

• Update of the question on Satellite Pro L40 - 15A - old BIOS BIOS cannot recognize the EEPROM

  Hello

  I can't Flash my bios.
  I have a Satellite Pro L40 - 15A.

  The Toshiba winflash tool provided with the bios file tells me as the "old BIOS cannot recognize EEPROM.

  I was recommended to use AFUDOS on another forum, but telling me that the bios has a boot not block valid.

  Flas for back FRIEND tells me that the flash rom is write-protected? There is no option in the bios to disable and I don't think that anyone would be stupid enough to put a hardware Bios protect jumper on a laptop.

  Help, please

  THX

  Dear Bruce

  Can you please tell me what you want to do and explain us it please your steps to update the BIOS of your laptop Satellite Pro?

  I did the update of BIOS more than 20 times in the last month and I really wonder what you mean with terms such as EEPROM or AFUDOS. What BIOS update version that you want to use? I assume as 5.10. Am I wrong?