Cannot restore from pration or R & R service disc.

Similar Questions

• Cannot restore from a backup

  I cannot restore from a backup and don't know why.

  I have a Crucial SSD of BX100 in my mid 2010 MacBook Pro. It is divided into two partitions. I got Snow Leopard on a partition and Yosemite on the other. For some reason any I've never understood the Snow Leopard guarded beachballing partition. This happened if often that I decided to wipe the disk and reinstall from my backup, do it before the beachballing began to occur.

  But I can't restore. I wiped the drive of a Snow Leopard system, repaired and reformatted. The drive is not Core Storage, this is Mac OS extended (journaled). When I try to restore the restore on it works for about two minutes and then stops. Finally, I get a message saying that the disc has been ejected incorrectly.

  I noticed that when I receive information on the drive, an element appears different from other readers and which corresponds to the element, owners enabled: no each other drive I've seen says owners enabled: Yes. Is it all just because there is no system on the partition?

  Also "ignore ownership on this Volume" must be checked or unchecked?

  Suggestions welcomed, I am baffled by this.

  Snow Leopard erase and install

  1. Insert the Snow Leopard DVD in the optical drive and restart the computer.
  2. Immediately after hearing the chime hold down the C key.
  3. Release the button when the Apple logo appears and wait for loading to complete.
  4. After the installer loads, choose your language and click on the continue button. When the menu bar appears select utility drive in the Utilities menu.  After disk utility charges select the entry out-bumpy in the list aside (mfgr. size ID and disc drive.)  In the right side of the disk utility window, click the Partition tab.  Set the number of sheets to (1) on the menu drop down. Click the Options button and select GUID, click on OK, the value of the Mac OS Extended journaled format type. Finally, click on the apply button.
  5. Once the format is complete, quit disk utility.  Continue with the installation of OS X and follow the directions.
  6. Once installation is complete, the computer will restart in the installation wizard. After completing the Setup Wizard, you will use a new installation of Snow Leopard. Open the software update and install updates recommended.
  7. If you plan to sell or to give to your remote computer, then proceed as follows: once you reformat your hard disk and reinstall Snow Leopard, the computer restarts with a welcome screen. To leave the Mac in a State OOTB (Out Of The Box), do not continue with the Setup program. Instead, press the command and Q keys to stop the computer. The installation wizard will guide you the new owner through the installation procedure, after that it turns on the computer.
  8. Download and install Mac OS X 10.6.8 v1.1 updated Combo. If necessary. It is not necessary if you are selling or giving your computer away.

• cannot restore from time machine

  MacBook pro 10.11.3 time machine backup data of the computer but cannot restore when entering time machine.

  When you select an item and click on restore, nothing happens?

  What you save up to? Some may not restore from a NAS device.

• cannot restore from the previous date says computer is unprotected I just get rid of the virus of audit system

  rid of virus check system but cannot restore the computer to the previous date

  You never said how you got rid of the "System Check" malware. As far as we know, he is still there. Follow these instructions (if you have not already done so):

  http://www.bleepingcomputer.com/virus-removal/remove-system-check
  Also, as Jose pointed out, there are programs that are designed to interfere with the system restore (Norton is one of the most common). But there are really two questions. First of all, we will treat your malware problem. We can always revisit SR at a later date.
  Finally, even once as Jose pointed out, you NEVER run the system restore after the removal of the malware! Which could only bring him back! That you have to turn it off and then put it again, which will REMOVE all previous restore points. You really all gone!

• iPhone 4 cannot restore from iTunes

  I'm trying to restore an iPhone 4 from iTunes, but I forgot the password. But when I try to restore it, it asks me to disable find my iPhone, but I can only do as I forgot the password. I want to restore it from a backup, and I do not want to reset to factory settings as there is a lot of data app I want to keep. It is not connected to the Internet somehow, since there is no way for me to connect to WiFi without knowing the password, and I have no valid SIM that fit in this. So I can't remove it from iCloud.com or any other device. I tried to turn it off by intentionally entering the wrong code several times, but that makes my computer does not recognize my phone at all. I did somehow your phone is more off making it run out of battery. The Apple ID was transferred to my account at my son's account (we have family sharing) some time ago and all backups are in the iCloud and without spare parts on my computer.

  Is their anyway to back up the phone on my computer without entering the password, so I can't erase the phone by other methods and that restore with backup on the computer? Thank you in advance.

  Phone: iPhone 4 running ios 7.1.2

  Computer: Toshiba Satellite C75 running Windows 10 (but not the last

  Software: iTunes 12.4.3.1

  Sorry but there is no way to bypass the blocking of Activation.

  Find my iPhone Activation Lock - Apple Support

• Lost all bookmarks. Could not import the USB key or IE and cannot restore from previous dates. Help!

  One day all my favorites have disappeared. I tried importing bookmarks from a USB key, but couldn't.
  Tried to import Mie... no luck. I tried "restore" using an old version date... no luck.
  Nothing has worked. Using Firefox 18.0.
  Computer operating system is Windows Vista Home Premium.
  Any help would be greatly appreciated.
  Thank you.
  Rodney

  Problems with bookmarks and history does not properly can be caused by a corrupted database places.sqlite file.

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

  See also:

  • http://KB.mozillazine.org/Lost_bookmarks
  • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

• Replaced the bad motherboard and cannot restore from recovery disks

  I replaced a card Pegatron M2N78 - mother in a Pavilion p6130y PC and I tried to restore to the recovery disks, but he says that the restore disks will not work on this system.  Really, I care is in accordance with the operating system (Vista), I don't want to pay for what I have already.  Research I've done shows that the old motherboard was known to be defective.  During the troubleshooting process, the recovery process was started, but then is broken when the card mother crapped out and didn't not recognize SATA devices.  When trying to start, he knew and then wouldn't recognize them, usually about 75/25% respectively.  Because of this, I can't just start it on the HARD drive and update the existing drivers and update the Vista license.  I have more money to buy only 7.

  How can I get the installed operating system or perform a full recovery on this system?

  Hello:

  The recovery disks only works on exact material they were made for.

  Because you have installed a different motherboard, at microsoft a new motherboard = a new PC.

  OEM licenses are licenses that computers come with HP (and any other manufacturer).

  This means that they are good only for that specific PC and cannot be transferred to another PC or motherboard.

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx#fBid=38vuxXQoPQY

  Q. a PC with an operating system of Windows OEM may have its motherboard updated and keep the same license? What happens if it was replaced because it was defective?

• Cannot restore from original image

  Hi there, I bought my pc couple months before windows 8, the other night, that I've upgraded to windows 8. Well although I had problems to couple with laptop, but when I go to the Recovery Manager and select Restore my pc to factory State, windows pc boots 8 troubleshoot screen I click pc to restore the image and I get the error, to recreate the image on your computer with the error code 0 x 80070002 how solve this problem?

  If you burned a DVD recovery value boot from the first disc. If you burn a landline HP to ask for a >Contact HP

• cannot restore the system with the Vista recovery disc, computer stuck in step 3 of 3 loop

  Hi all

  My computer has been blocked in the formidable step 3 of 3 loop. I followed the advice of Mr. Murphy and created the Vista recovery disk. I loaded it and followed the instructions. Everything was fine. I chose a 5 days ago restore point, and it went well until he must "finalize the restoration of files...". ». That's where he stayed - it would not be completed. I tried the restore points different, all with the same result. Any help would be greatly appreciated.

  Try to make with her startup repair.

  With this CD, you can also do a startup repair of your Vista OS with it.

  If she can't do a startup repair and system restore has failed, it is time to consider doing a re-install of the Vista operating system.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot restore HD

  I can't restore my HD to its original state by using the F-11 method. Its telling me that my HD has been changed somehow and the only thing I can think of that I did, was buy an external HD (WD The Book Home Edition). Everything what was the use until 30Gs back up a few copies of the entire space. In any case, someone has any ideas how to fix this? I still all my backup CD, but I prefer not to go this route, because once you do, you cannot restore from f - 11 yet once which is what I really prefer to do because a lot of programs are already installed when you do this. for any help or suggestion would be greatly appreciated. : smileyvery-happy: its a w Inspirion 9300 / HD 100 G

  
  

• Updated the MacBook Pro to ElCapita to Apple's Service. Now cannot restore last July 7 from Time Machine backup. Help, please.

  Updated the MacBook Pro to ElCapita to Apple's Service. Now cannot restore last July 7 from Time Machine backup. Help, please.

  Visit Time Machine FAQ of Pondini helps with Time Machine. It is a vast site with almost everything that you need for using Time Machine. You will not find a better resource for Time Machine in one place. Due to the disappearance of James Pondini is the site is no longer updated. Therefore, some information may be somewhat outdated.

• Cannot repair the photo library. The best way to restore from iCloud library?

  The photo library of the system is damaged and cannot be repaired.

  It is said "Photos has attempted to repair the library"Pictures Library 2015 ", but can not open it." .

  
  

  I first met problems with this library a week before and at the time where I could repair and open the library successfully, but lacked a month value of photos.

  Given that it was successfully in the iCloud library, I left it to re - sync - but this process suspended several times before the end, and the photo library of the system now seems to be permanently damaged.

  I have no project of marked or impression of faces in the photo library of the system, then I would be happy just to restore from iCloud.

  My plan is to put in place a new - empty - library and then that designate the library of the system.

  If I understand this right, the new (empty) system Photo library will now resynchronize with iCloud and will copy all the contents of this library of back to my Mac.

  Is this correct? It is the most effective way to restore my library?

  And while I'm here - what is the best way to manage a very large library? I had my photo library become corrupted ten three or four times over the past years and have found it necessary to divide into single years to prevent this. I overlooked this piece of household by the end of 2015, and now it's happened again... Surely, there must be an easier way to manage libraries of images of several years?

  Is this correct? It is the most effective way to restore my library?

  Yes, if you don't have a useful upward on your Mac.

  And while I'm here - what is the best way to manage a very large library? I had my photo library become corrupted ten three or four times over the past years and have found it necessary to divide into single years to prevent this. I overlooked this piece of household by the end of 2015, and now it's happened again... Surely, there must be an easier way to manage libraries of images of several years?

  How do you call a large library, I've never had a corrupt Library, I think that your problems are not the result of the size of the library, but rather something else. From my experience it is recommended to maintain a local upward, I use Time machine, but also have a second to the top using a third-party backup solution.

• Fusion drive: restore from Time Machine - "the disc cannot be erased."

  Hello

  On a new iMac (end of 2015), I need to wipe my drive of Fusion of 3 TB (El Capitan, unencrypted, just 1 partition, no Boot Camp partition) and then restore a backup Time Machine (made on a previous iMac, also with disc Fusion of 3 TB (El Capitan, unencrypted, just 1 partition, no Boot Camp partition).

  According to the document from Apple: https://support.apple.com/en-us/HT204904 'restore from a Time Machine backup' I...

  1. restart with cmd + R (later also tried cmd + alt + R and also a USB bootable of course El flash drive)

  2 selected "backup restore Time Machine"

  3 selected my external backup disk, Time Machine

  4 choose the most recent backup

  5 selected "Macintosh HD" as a destination and click "continue".

  ... but then the following message appeared "disc cannot be erased.

  

  Then I tried to erase 'Macintosh HD' via disk utility:

  1. restart with cmd + R (later also tried cmd + alt + R and also a USB bootable of course El flash drive)

  2 choose disk utility

  3 choose "Macintosh HD"

  4. click on tab "delete".

  5. click on the button 'clear '.

  ... then I got the error message:

  "Clear process failed..." Details: Dismantling DIS3 - deletion of logical volumes of the logical volume group - cannot remove the basic storage logical volume. Operation failed... »

  I was in the 'loop', the only way out was to "Reinstall Mac OS X", and then after many hours, he had once again my old installation flubbed with everything I wanted to get rid of!

  How to restore my backup Time Machine - nothing more or less - to my new iMac?

  I lost 3 days now with this problem. I really hope someone has a solution.

  Thank you very much!

  Apple did not provide an easy way to recover from this condition. If you are not able to carry out these instructions, please someone more experienced to help you get. One option is to take an appointment 'Genius' on an Apple Store.

  Starts the Internet recovery mode by pressing the key combination command-option-R to start ringing. Release the keys when you see a spinning globe.

  Note: You need an Ethernet or Wi - Fi connection permanent Internet to use recovery. It will not work with modems USB or PPPoE, proxy servers or networks that require a certificate for authentication.

  In the OS X Utilities screen, select

  Utilities ▹ Terminal

  in the menu bar at the top of the screen, not one of the items in the OS X Utilities window.

  Follow the steps in this thread to ASC to split the fuser unit. The long string of letters, numbers and dashes you will need to enter will be different in your case. Copy and paste into the command in the Terminal window.

  This will remove all data from the fuser unit, then you had better be sure of your backups.

  Quit the Terminal, and then repair the Fusion drive (see "Troubleshooting" on the linked page.)

  Quit disk utility. Then you should be able to install OS X and restore your data from a backup in the main screen.

• Just updated to ios 9 and my ipod touch is stuck at 'update of the iCloud parameters.  I can not restore from iTunes as I have to disable 'find my iPod toch' and cannot do the iPod is blocked with the message to update.  Will not work force a stop down.

  Just updated to ios 9.2 (from 8 something) and my ipod touch is stuck at 'update of the iCloud parameters.  I can not restore from iTunes because I have to disable "Find my iPod touch" first of all, and I can't do as the iPod is blocked with the message to update.  Forcing a stop down does not work that for some reason, I am unable to turn off my iPod touch manually.  I tried to turn off my wifi to see if that stops the iPod touch, but he always keeps on the message to iCloud.  Do I just wait until the battery sinks so that it forces a reboot?

  Place your iOS device into Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.

  iOS: I forgot the password or disabled device

  If the recovery mode does not work, try the DFU mode.

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  To learn how to restore:

  iTunes: restore iOS software

  To restore backup see:

  Restore your device from an iCloud or iTunes backup - Apple Support

  If you restore from a backup of iCloud apps will be automatically downloaded. If you restore from backup iTunes, applications and music must be in iTunes since synchronized as music media library and apps are not included in the backup of the iOS device what iTunes does.

  You can re-download most of iTunes purchases by:

  Download after purchase from the App Store and iTunes Store iBookstore

  If no problem what happens or doesn't happen, and when in the instructions? When you get the iPod into recovery successfully mode and connect to iTunes on the computer should say that it found an iPod in recovery mode.

• Restore from 5 to 7 new +?

  I have an old iPhone 5 that is stored in iCloud.  I just pick up a new iPhone 7 + and tried to restore from iCloud.  After a minute or two, I get a message "cannot restore the backup.  Now what?

  Hello Steven T,.

  Thank you for reaching out to the Community Support from Apple. I know how it is important to get your new phone loaded with all your important data, and I want to help him.

  Often, when you see this behavior, it is because the new phone is not completely up to date and can be run at an old version of the iOS and the phone you are restoring from. Take a look at the article below to make sure your new 7plus iPhone running the latest version of iOS10.

  Update the software on your iPhone, iPad or iPod touch iOS

  Then try to restore your iCloud back up again and if the behaviour continues or if you are having trouble, the entire community is here to help.
  Best regards