Cannot retrieve information from haerware

Similar Questions

• Media Player play error "unable to retrieve information from server, UPnP media."

  I have a Denon AVR 1912 receiver and a PC running Windows 7 w/WMP12.  When I try to use the ' play to ' I can select the receiver but get an error "Unable to retrieve media information from media server."

  I tried to re - install WMP 12 and tried to disable my firewall without success.  AirPlay works very well, but I prefer WMP I-Tunes.

  The content is on the same computer.  Streaming is enabled and that the receiver is "allowed".

  I don't know if it's fixed or not... but I found the solution last night after I spent the most frustrating 5 hours of my life! It is probably a windows problem. I recently replaced my HP laptop with a Dell Vostro 3450 and all of a sudden, I found that this "Play To" feature did not work with my Samsung LED TV UA55C8000. To confirm that this was not a firewall or format related issue I even used the Samsung PC Share software on my PC to act as a DLNA server... With PC share the WMP12 server found no problem 'Contacting the media server' as... but with its own library, it's just stuck there, with a possible failure message. [Point to note is that, even when he could not contact the media server, I could control the TV volume using the same window!]

  This is what did the trick for me:

  1 closed WMP12.

  2. go into [Control Panel-> system] Services and safety-> administration-> Services tools

  3. Locate the service named "Windows Media Player Network Sharing Service"

  4. stop the Service manually.

  5 locate the "UpnP device host" service Stop the service and restart it.

  6. start 'Windows Media Player Network Sharing Service' now.

  7. close the control panel and all the windows. Open Windows Media Player... make a right click on a playlist and see if the Play option lists the TV. Try to play now... He started playing for me at this point!

• Verity cannot retrieve collections from the Search Service.

  Hi guys, when I go to the ColdFusion MX7 admin page I get this error message.
  Failed to retrieve collections from the Search Service.
  Please verify that the ColdFusion MX search server is installed and
  running.
  
  I found a tech note on this but I don't know how to implement this. It is said: "Sytems that uses IPv6. IPv6 uses: 1 as the loopback address, so even if the hosts file has an entry for 127.0.0.1, it may also have an entry of: 1 for looping.
  If your error is caused by the use of IPv6, solve the problem by setting localhost 127.0.0.1 on Services and data > Verity K2 server to the ColdFusion Administrator page. »
  
  Help I do not understand what to do or where I go to change this?
  
  Here is the link to the Technical Notes Adobe:
  http://www.Adobe.com/go/6c6881a9

  In the left panel of the ColdFusion Administrator expand the link data & Services. Select the hyperlink Verity K2 Server. Replace localhost 127.0.0.1 in the host of Verity name text box.

  Ted Zimmerman

• Retrieving information from a CD may be damaged

  I have a CD with a WMV file that I've not used for years I thought I had lost.  I just found it (it is not in the best conditions) and my computer does not read it.  The drive sounds like it is reading and then nothing happens.  I understand that this is probably because the drive is old and not been greatly neat but is it possible to get me the information about it?  I also tried to go into 'My computer' and try to open it manually but it tells me that there is no disc and promplty opens the drive for me to insert a disk.

  Hello

  Is the CD/DVD drive read other CD?

  I suggest you to try the CD on another computer and check if it helps.

  If you encounter a problem with only this old disc, then the disc may be damaged and there is no way to retrieve the data from disk. You will need to get a third party using your favorite search engine software.

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope the information is useful.

• How to retrieve information from the account of a user of Windows Messaging live

  Hello

  For Windows live mail under Windows8 can retrieve us account information, emails and contacts from a backup of the user if it has not exported before information.

  Try asking in the Forum Windows Live Mail:
  http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail?tab=threads

• Im trying to retrieve information from a hard disk.

  Recently, at work, we had a computer that displayed the dreaded death blue screen.  It wasn't a problem we have other computers to use, but my boss would like to try to recover some of the files on the hard drive.

  So the question is...

  1. is there a way to replace missing files that are causing the blue screen.  My windows recovery CD does not work.

  2. I put the HD in another computer and can access the files on the hard drive. But they are protected by the original users passwords and cannot be loaded by the new operating system.  Is there a way to get around this.

  Thanks for any help that can be provided

  You might have the chance to do a system restore:

  "How to start the System Restore tool by using the option of safe mode with the command prompt in Windows XP"
    <>http://support.Microsoft.com/kb/304449 >

  How were protected by Word files?  He used "Encrypting File System" of Microsoft (EFS)?  If so, the data will be permanently lost unless you can get certificates either by getting the system running again or from backups of certificate [have] created you when you first start using EFS.  Mandatory reading for EFS: see paragraph "why you should back up your certificates.

  "Best Practices for encrypting file system"
    <>http://support.Microsoft.com/kb/223316 >

  There is a program I've heard of "AEFSDR", which could also help to recover the files.  I have no experience with this program.  Try Googling it.

  HTH,
  JW

• Of WebWorks for waterfalls - cannot retrieve data from localStorage WebWorks

  Hi all

  In fact, WineDiary carried out with WebWorks.  But it is a bit slow and I don't like the same user experience I use BBUI.js sorry for all those who work with this, but for me it is not quality and it's a lot of code for portable a bit and finally not if if you really want BB10 appearance.

  So I decided to submit my application for Cascades natively. Now that I finished the native application, I'm looking for a way to read the localStorage writes with the WebWorks app but the WebView does not return the old values. Maybe the WebView do not run under the same domain name, then the WebView can not read the old values written with WebWorks.

  I use this method:

  webView.evaluateJavaScript ("document.body.innerHTML += localStorage.length ;"); ")

  Hello

  I confirm that I understand the problem:

  • You re-written your app in the Cascades and try to read the values of localStorage to the other (WebWorks) version of the application is also installed on the device?  If so, it is not possible. Applications cannot read memory to other applications. It is the security design.  Used by WebWorks Web mode is different from that used by Cascades and they do not share the same memory space for localStorage. Therefore, the system treats as 2 single applications, despite the fact that you may have named them even.

  or

  • You don't see the localStorage API works correctly when executed inside a WebView stunts?  If so, this should be possible. Please provide an example of how you write to localStorage.

  See you soon,.

  Adam

• How to retrieve information from the appellant in BPEL

  I have a SOA - BPEL process that is consumed by the different systems. Purposes of registration, I need to retrieve the host name of the appellant for each request.

  Consumers are not cross any additional headers or special settings of WS-addressing.

  Since the BPEL process knows how to call back in an asynchronous call, I believe firmly that the caller information should be stored somewhere on the server.

  So please let me know if anyone has any idea on this.

  Thank you

  Helene.

  Hi Helen,

  you could try this - get the value of the header property transport.http.remoteAddress and assign it to a variable. To do this, in your activity. More details on how get/set header values can be found here - https://docs.oracle.com/middleware/1213/soasuite/develop-soa/GUID-33A38C1A-38A6-473B-9FEA-D3164AD7A118.htm#SOASE20757. Double click on your activity and go to the 'Properties' tab add the transport.http.remoteAddress and assign it to the existing variable.

  HTH,

  A.

• Retrieving information from a table of embedded hash

  I know it should be more simple, but I don't know the syntax to retrieve specific keys and entries of the subkey.  My hope is to display the information in to a table or any other required format hash tables.

  Here's the current code snippet.

  $Disk = @{}
  
  ForEach ($vSCSIController in ($vmView.Config.Hardware.Device | Where {$_.DeviceInfo.Label -match "SCSI Controller"})){
      #'Unit Number: ' + $vSCSIController | %{$_.UnitNumber} 
      ForEach ($vDiskDevice  in ($vmView.Config.Hardware.Device | Where {$_.ControllerKey -eq $vSCSIController.Key}))
          {
          $Label = $vDiskDevice.DeviceInfo | %{$_.Label}
          [string]$BusNum = $vSCSIController | %{$_.BusNumber}
          [string]$DiskDev = $vDiskDevice | %{$_.UnitNumber}
          [string]$SCSIid = $BusNum + ":" + $DiskDev
          $HD = Get-VM $VM | get-harddisk | where {$_.Name -eq $Label}
          $ID = @{    
              "Label" = $Label
              "CapGB" = [System.Math]::Round($HD.CapacityKB / 1MB, 2)
              "Filename" = $HD.Filename
              "StorageFormat" = $HD.StorageFormat
              "ScsiID" = $SCSIID
              }
          $Disk.Add([string]($HD.Name),$ID)
          }
      }
  #
  #"Disk Name" + "`t" + "SCSI Bus" + "`t" + "Capacity in GB" + "`t" + "Filename" + "`t" + "StorageFormat"
  #'==============================================================================================================='
  
  
  
  $Disk.keys
  

  The $Disk.Keys is where I need help.  How I would display all values if the label is "Hard Disk 10"? and in the order listed near the end of the excerpt?

  Try something like this

  $hd = $disk.GetEnumerator() | where {$_.Value.Label -eq "Hard disk 10"} | Select -ExpandProperty Value
  

  Via $hd you can now access the properties.

  $hd. Label / $hd. CapGB /...

• Need to retrieve information from the user who blocked the account

  Hi all
  
  As we had forced her, we changed the password of our schema.
  
  The same pattern has been locked up in the next day morning.
  
  We have required to generate the information to senior management who has blocked the account by giving the wrong password.
  
  Kindly guide / help me to retrieve the USER information.
  
  Thanks in advance.
  Orahar

  Hello

  SQL> show parameter audit
  ORA-00942: table or view does not exist
  

  you're trying the foregoing to the privileged user not DBA.

  Try your user SYS or SYSTEM.

  Kind regards
  Delphine K

• Cannot retrieve files from my desktop computer.

  My desktop computer is not letting me get back files and working at snail PACE.  HELP PLEASE.

  Hello

  (1) how do you try to transfer files to another computer?

  (2) which operating system you have installed on the other computer?

  You can refer to the procedure described in the following article to improve your computer's performance.

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance

  According to the file transfer, see the steps in the following articles.

  Transfer files from another computer.

  http://Windows.Microsoft.com/en-us/Windows-Vista/transfer-files-from-another-computer

  Transfer files and settings from another computer.

  http://Windows.Microsoft.com/en-us/Windows-Vista/transfer-files-and-settings-from-another-computer

  Transferring files and settings: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/transferring-files-and-settings-frequently-asked-questions

• Hi to all of that I doubt to retrieve information from two tables to help join

  SQL > select ename, empno, lease_car_id employee_car_list;

  EMPNO, ENAME LEASE_CAR_ID

  ---------- ----------      ----------

  7369 SMITH 1

  7499 2 ALLEN

  7521 WARD 3

  7566 JONES 4

  7654 MARTIN 5

  SQL > select lease_car_id, lease_car_make, lease_car lease_car_model;

  LEASE_CAR_ID LEASE_CAR_MAKE LEASE_CAR_MODEL

  ----------        -------------     ----------------------

  1 TOYOTA CAMRY

  2 FORD TAURUS

  3 GM BUICK

  4 GM CHEV

  5 GM BUICK

  I want to know the empno, ename that uses lease_car_make and lease_car_model of GM, BUICK?

  I wrote a join condition, but it displays every thing please change my query

  Select employee_car_list.empno, employee_car_list.ename in the outer join left employee_car_list

  lease_car on employee_car_list.lease_car_id = lease_car.lease_car_id

  You can use it. Left outer join will be used when you want all rows from the left table and the matching rows from the right table

  SELECT EmpNo, ename FROM

  EMPLOYEE_CAR_LIST T1,

  LEASE_CAR T2

  WHERE T1. LEASE_CAR_ID = T2. LEASE_CAR_ID

  AND LEASE_CAR_MAKE = 'GM' AND LEASE_CAR_MODEL = 'BUICK ';

  output:

  7521	WARD
  7654	MARTIN

  Post edited by: Partha Sarathy S

• Is anyway to uninstall p/shop frrom my old laptop which was damaged and I cannot retrieve information and re - install on my new laptop? Thank you

  I already bought p/shop and installed on my old laptop.

  It was badly damaged and I can't retrieve anything either of him without paying a fortune for a society trying to open it.

  Is there anyway I can get p/shop uninstalled and reinstall t on my new laptop?

  The old laptop is completely kaput - is yet to turn on?

  Thank you

  So I wouldn't worry even on this. Just go ahead and install it on the computer. You are allowed to install on two computers. After that, you need to contact Adobe to Deauthorize all computers, then you can authorize the new computer. But it's for all versions before CC. With CC, you will get a message that you are trying to install on more than two computers and will ask you if you want to disconnect all computers. This requires your username and password, then only you can do. Then you can connect to the new computer.

• Retrieve information from a unauthorized (i) reformat hard drive

  My new external hard drive has just automatically reformatted without my permission. Nothing has been re-written on the I: drive since the format.  Is it possible for me to restore these deleted/over-written data?

  Walter thanks! Unfortunately it did nothing for me.  I bought an Iomega storage drive.  The 2nd time that I used it, it auto-protege in writing.  Today is the 3rd time that I used it and it auto-formaté without asking permission. Nice! These two sites have also been suggested: http://free-backup.info/data-recovery-software.htm... and http://www.spotmau.com/products/package/full.htm?gclid=COD-xtKL16YCFQjrKgoddRc6JQ

  It seems that my data is lost. Ah good... to reliable DVD! Thanks again by the way Walter

  Hey jojoroon

  I'm sorry that he did not work for you

  There are many programs to try to find deleted data

  overwritten data are much more difficult to recover

  If I were you I would ask their support as to why you have these problems with their newly purchased product

  https://Iomega-AP-en.custhelp.com/app/home

  Walter, the time zone traveller

• Retrieving information from Source-target of the OWB repository

  Hi, I am trying to find a SQL script that I can run against the OWB repository in order to give me a 2 column (Source / target) output for all mappings in a Module of Oracle. My goal is to help developers report, who are most familiar with the system tables and having a bit of trouble understanding how I standardized data.
  Someone at - it something like that I can use?
  
  (OWB 10.2)
  
  Thank you!

  Something like this:

  Select
  separate "TARGET."
  COMP.map_name,
  COMP.data_entity_name,
  COMP.operator_type
  Of
  model of the all_iv_xform_map_components,
  all_iv_xform_map_parameters param
  where
  Lower (operator_type)
  in ('table', 'view', 'dimension', 'cube')
  and param.map_component_id = comp.map_component_id
  and param.source_parameter_id is not null
  UNION
  Select
  separate "SOURCE."
  T1. C1,
  T1. C2,
  T1. C3
  Of
  (select
  COMP.map_name c1,
  COMP.data_entity_name c2,
  C3 COMP.operator_type,
  Max (param.source_parameter_id) c4
  Of
  model of the all_iv_xform_map_components,
  all_iv_xform_map_parameters param
  where
  Lower (operator_type) in
  ('table', 'view', 'dimension', "cube")
  and param.map_component_id = comp.map_component_id
  Group
  COMP.map_name, comp.data_entity_name, comp.operator_type) t1
  where t1.c4 is null
  2.1 order