Cannot retrieve the Satellite L500

Similar Questions

• Cannot retrieve the Satellite to factory settings after installing Win XP

  I was running windows recovery then I chose 'delete all data... '. "something like that.
  Then in the Middle by mistake I turned off the system.

  After that, I tried to start windows so was in error "missing operating system". I managed to install WINDOWS XP, so I could access HDD RECOVERY but nothing happened.

  I tried pressing the "F8" key and also the '0' key when the computer starts to "toshiba" logo but it is still not send me any option to get my computer back to windows vista or you can say "out of the box.

  One important thing is, while installing windows XP its show me this HARD drive recovery exist and 973 MB is free off 5665 MB. This means that I have still all windows and the drivers on the HARD drive. Now please help to return normal system recovery or BOX STATE.

  > After I tried to start windows so was in error "missing operating system". I managed to install WINDOWS XP, so I could access HDD RECOVERY but nothing happened.

  The installation of Win XP has damage and remove the Boot Manager and options preinstalled by Toshiba and backed by Toshiba picture.

  This means that if you will be unable to retrieve the device using the drive HARD recovery option.

  You could retrieve the device back to factory settings using only the Toshiba recovery disc! But I guess that you didn't create this disk is good?

  Well, in this case, you can order this disc from here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• Cannot retrieve the Satellite A200-1RK - error: 18121 COMPONENTS. SAV

  Hiya,

  This is it, I got a laptop TOSHIBA Satellite A200-1RK for only less than a year and currently just started to experience problems in this regard.
  So I decided to restore the computer to factory settings using the recovery disk supplied with the notebook. After that the following instructions which recommended that the process started to get succesfull until after 100% invites it commond came suddenly with the following error:

  [Error: 18121 C:\Windows\System32\config\COMPONENTS.] SAV

  Error image restoration.

  The specified image file did not contain a resource section.

  ERROR: ImageX could not apply VISTA E:\05241XP.swm Index 2 weird to C:\.
  Press a key to continue...

  Then, when I press a key, it remains on a white screen and with TOSHIBA down right and don't turn...
  Then I restarted using the power one button came the following:

  Windows could not start.
  A recent hardware change followed by instructions to use the vista DVD and recover the PC using that...

  Help would be greatly appreicated as the laptop does not work... Thanks in advance...

  Hello

  Hmm strange I have never seen anything like it.
  But according to the error message that imagex could not apply VISTA E:\05241XP.swm Index 2 of ODD to C:\ there was a problem copying some files from E to C (from HARD disc to disc).

  Have you tried to boot from the recovery again disk? If this isn't the case, then try it!

  If you will not be able to restart the laptop using the Toshiba Recovery then disk you should check if it s possible to boot from the other bootable discs like Win XP or similar.

  But if none of these disks will work then a hardware problem is possible. In this case I recommend you first HARD drive.

  Good luck

• Cannot retrieve the Satellite C855D-15W with recovery DVDs

  Because of the issue, had to do a factory reset.
  Laptop came with preinstalled Win 8.

  Order recovery of Arvato media.

  In vain several times tried to recover the laptop using the discs. Same problem occurs: -.

  complete partition initialization
  * "Copying files please wait" 1.5 to 2 hours "
  * "An error has occurred.
  error: 0002
  Copy image error
  Please press OK to shut down the computer.

  Now the HARD drive is completely removed.
  Suspect the recovery media and asked for replacement.

  Any help / settings would be appreciated.

  Thank you
  concerning
  Piping Plover

  Hello

  In my opinion, there are two reasons that can explain why the recovery procedure fails.

  (1) failure of HARD drive
  (2) failure of the recovery disc

  I think you should first check if the disk HARD isn t the troublemaker.
  Go to BIOS (F2) and check if the HARD drive is listed on the first page of the BIOS.
  In case it is, the HARD drive may be OK

  In this case, the recovery disc may be defective.
  In this case, you should get in contact with the provider/supplier (Arvato) disk for the new medium.

• Cannot retrieve the Satellite P200-123 - IMAGEX error message

  Hello

  I HAVE A LAPTOP TOSHIBA P200-123 AND I AM DOING A RECOVERY, BUT FOR SOME REASON, IT IS ABOUT 19 TO 26% AND THEN RETURNS WITH AN ERROR SAYING THAT IT COULD
  IS NOT APPLICABLE TO IMAGEX AND I'M AT A LOSE WHAT TO DO.

  IS THERE ANYONE WHO CAN HELP ME WITH THIS PROBLEM.

  Hello Erin

  It is not easy to say why this happens because this error message occurs for different issues.
  One thing can be the reason for this.

  If I well remember when you start the recovery option it must be key SETUP (next step after the confirmation of the language). Maybe you're trying to use installation option OS on the existing partition).
  I tested it a long time ago, and I can confirm that this will not work. What is happening is very strange.
  What is happening, it's a procedure facility trying to install the OS on partition WinRE (Vista). This partition is 1.5 GB only and after 20 or 30% facilities simply stops.
  Maybe you try to do this. I do not know.

  Try using the installation of recovery with the default settings. Don't change anything in the configuration option.
  Test if you please and let me know exactly what is happening.

• Problem creating discs of recovery for the Satellite L500-126

  Hello

  I have a problem of creation of recovery for the Satellite L500-126 disks.

  I'm using the Toshiba Recovery Disk Creator.

  The 1st disk is ok.
  When I try to do the 2nd drive, the systems stops exactly 50% of the 2nd drive. and no more reaction from the creator of disc.

  I tried 2 x, and every time I had to give up and throw the dvd.

  any suggestions?

  Hello

  You should try another DVD from different manufacturers
  It s nothing unusual that some DVDs are not totally compatible and CD/DVD players cannot write data correctly
  I had this problem in the past and could solve this test and using different DVD.

• ORA-01124: cannot retrieve the data file 1 - file is in use or recovery

  I'm trying to recover the database in waiting, but it gives the error below.
  
  ORA-00283: cool cancelled due to errors
  ORA-01124: cannot retrieve the data file 1 - file is in use or recovery, the recovery is already said
  ORA-01110: data file 1: ' I:\ORACLE\QAS\SAPDATA1\SYSTEM_1\SYSTEM. DATA1'
  
  When I checked in the alert log recovery is not started. and later I hae given ' alter database recover Cancel "and the command to meet with the threshold.
  
  "media recovery has not started.
  
  It seems that the recovery was stuck between the two.
  Please advise me how to kill the recovery session that is stuck. because I don't want to bounce the database pending.
  
  Thanks in advance.

  Dataguard and MRP, you run a script before.

  In a standby scripted, a session to RETRIEVE the DATABASE would an UNTIL clause (SEQUENCE up to THAT most likely). At the end of the recovery at this point (SEQUENCE #), he left and stop at the database.

  In addition, the script is such that when a RECOVERY session is active, another session is not authorized to start. It can loop in pending state or go out and do it again the next scheduled interval.

  Apparently your startup script is not strong enough to prevent another session of RECOVERY to start even though the first is active (or it doesn't have a good up to THAT clause and stop, exit, closing stocks)

  What you have is a custom implementation of a database of pending. Without all the details of the script, the 'blocking' between sessions (to avoid a second RECOVER start when one is already running) etc... We can't really do much to help you.
  Your scripts must be standing with status information. It should be possible for you to discover the 'other' sqlplus session which emanates a DATABASE to RECOVER, but not yet out (p. ex... How about a simple "ps - ef |") grep sql' and ' ps - ef | combination of grep ora"?)

  Hemant K Collette

  Published by: Hemant K Collette on May 29, 2013 17:47

• 10gr 2-Sybase15-ORA-28545: cannot retrieve the text of the message from NETWORK/NCR

  Hi all
  
  I am trying to establish connectivity between Oracle 10 g 2 (Win XP Pro 2002) and Sybase ASE 15.0.2 (Sun Solaris 5.9) by using the transparent gateway for Sybase (TG4SYBS), but encountered the following error. I have looked for a solution quite well in all directions, but so far have been quite unlucky. This is my last resort. I don't really know what I'm doing wrong as I followed the steps of installation and configuration correctly. Please note:
  -Oracle transparent gateway software and database are installed in different homes; and,
  -J' created and tested the ODBC DSN connectivity with the Sybase server.
  
  The only thing that I have real concern about is the version of the Sybase server 64-bit OS; Windows Oracle server is 32-bit. Are going to count this could be the problem?
  
  ORA-28545: error diagnosed by Net8 when connecting to an agent
  Cannot retrieve the text of the message NETWORK/NCR 65535
  ORA-02063: preceding 2 lines of CSSTAT
  
  
  I am enclosing also any of the configuration system below:
  
  ------------------------------------------------------------------------------
  
  Database server
  ===============
  
  V Windows XP Professional 2002 SP2
  
  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0
  
  Sybase Adaptive Server ODBC Driver 15.00.00.152
  
  
  C:\ > echo %path%
  C:\oracle\product\10.2.0\tg_1\bin; E:\OracleHomes\agent10g\jlib; E:\OracleHomes\ag
  ent10g\bin; E:\OracleHomes\oms10g\bin; E:\OracleHomes\oms10g\jlib; C:\Program Files
  Company \Business Objects\BusinessObjects 6\bin\orb\asp\6.0\bin. C:\Program Fi
  les\Business Objects\BusinessObjects Enterprise 6\bin\orb\bin; C:\Program Files\B
  usiness Objects\BusinessObjects Enterprise 6\bin; C:\sybase\DataAccess\OLEDB\dll;
  C:\sybase\DataAccess\ODBC\dll; C:\sybase\Shared\Sybase Central 4.3; C:\sybase\OCS-
  15_0\lib3p; C:\sybase\OCS-15_0\dll; C:\sybase\OCS-15_0\bin; C:\sybase\JS-12_5\bin; C
  : \sybase\ADO.NET\dll; C:\sybase\ODBC; C:\Program WinRAR; C:\Windows\System32;
  C:\WINDOWS; C:\WINDOWS\System32\Wbem; C:\sybase\DBISQL\bin
  
  ------------------------------------------------------------------------------
  
  Sybase server
  =============
  
  Er1min01 of SunOS 5.9 Generic_122300-11 sun4u sparc SUNW, Sun-Fire-V440
  
  Adaptive Server Enterprise/15.0.2/EBF 14328, P, Sun_svr4, OS 5.8/ase1502/2486/64-b
  IT/FBO/Thursday 24 May 12:18:26 2007
  
  ------------------------------------------------------------------------------
  
  Sybase SQL.ini
  ==============
  
  [MINSAT]
  Master = TCP, 192.168.1.150, 5002
  Query = TCP, 192.168.1.150, 5002
  
  ------------------------------------------------------------------------------
  
  C:\oracle\product\10.2.0\tg_1 > tg4sybs
  
  Oracle Corporation - WEDNESDAY SEP 23 2009 02:43:29.406
  
  Heterogeneous Agent Release 10.2.0.1.0 - Production built with
  Driver for SYBASE
  
  ------------------------------------------------------------------------------
  
  inittg4sybs.ora
  ===============
  
  # This is an example of initialization file of the agent that contains the HS settings
  # needed for the transparent gateway for Sybase
  
  #
  # HS init parameters
  #
  HS_FDS_CONNECT_INFO = MINSAT.csstat
  HS_FDS_TRACE_LEVEL = OFF
  HS_FDS_RECOVERY_ACCOUNT = RECOVERY
  HS_FDS_RECOVERY_PWD = RECOVERY
  #HS_FDS_TRANSACTION_MODEL = READ_ONLY
  
  #
  # Required for Sybase environment variables
  #
  SYBASE the value = "C:\\sybase".
  
  ------------------------------------------------------------------------------
  
  Listener.ora
  ============
  
  listener.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
  # Generated by Oracle configuration tools.
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
  (= Extproc PROGRAM)
  )
  (SID_DESC =
  (SID_NAME = csstat)
  (ORACLE_HOME = C:\oracle\product\10.2.0\tg_1)
  (PROGRAM = tg4sybs)
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = FH)(PORT = 1521))
  )
  )
  
  SUBSCRIBE_FOR_NODE_DOWN_EVENT_LISTENER = OFF
  
  ------------------------------------------------------------------------------
  
  tnsnames.ora
  ============
  
  tnsnames.ora # Network Configuration file: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
  # Generated by Oracle configuration tools.
  
  TEMP =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = FH)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = TEMP)
  )
  )
  
  csstat =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.123.49)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = csstat)
  )
  (HS = OK)
  )
  
  EXTPROC_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC0))
  )
  (CONNECT_DATA =
  (SID = PLSExtProc)
  (PRESENTATION = RO)
  )
  )
  
  ------------------------------------------------------------------------------
  
  C:\oracle\product\10.2.0\db_1\BIN > lsnrctl status CSSTAT
  
  LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 23-SEP-2009 02:47
  : 10
  
  Copyright (c) 1991, 2005, Oracle. All rights reserved.
  
  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=192.168.123.49) (PORT = 152
  ((1)) (CONNECT_DATA = (Server = Dedicated) (service_name = csstat))(HS=OK))
  STATUS of the LISTENER
  ------------------------
  Alias LISTENER
  Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - production
  ction
  Start date 23 - SEP - 2009 01:48:54
  Uptime 0 days 0 h 58 min 16 s
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Listener parameter File C:\oracle\product\10.2.0\db_1\network\admin\listener.o
  RA
  Listener log file C:\oracle\product\10.2.0\db_1\network\log\listener.log
  
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=FH) (PORT = 1521)))
  Summary of services...
  Service 'OEMREP_XPT' has 1 instance (s).
  'Oemrep' instance, State LOAN, has 1 operation for this service...
  Service 'PLSExtProc' has 1 instance (s).
  Instance of 'PLSExtProc', status UNKNOWN, has 1 operation for this service...
  Service 'TEMPXDB' has 1 instance (s).
  Instance 'temp', State LOAN, has 1 operation for this service...
  Service 'TEMP_XPT' has 1 instance (s).
  Instance 'temp', State LOAN, has 1 operation for this service...
  Service 'csstat' has 1 instance (s).
  Instance of 'csstat', status UNKNOWN, has 1 operation for this service...
  Service 'oemrep' has 1 instance (s).
  'Oemrep' instance, State LOAN, has 1 operation for this service...
  'Temp' service has 1 instance (s).
  Instance 'temp', State LOAN, has 1 operation for this service...
  The command completed successfully
  
  ------------------------------------------------------------------------------
  
  C:\oracle\product\10.2.0\db_1\BIN > tnsping CSSTAT
  
  AMT Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production 23-SEP-2
  009 02:48:12
  
  Copyright (c) 1997, 2005, Oracle. All rights reserved.
  
  Use settings files:
  C:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora
  
  
  TNSNAMES adapter used to resolve the alias
  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.
  123.49)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = cssta
  (t)) (t)) (HS = OK))
  OK (20 ms)
  
  ------------------------------------------------------------------------------
  
  SQL > create database link csstat connect to the 'fw' identified by ' * ' using 'csstat ';
  
  Database link created.
  
  ------------------------------------------------------------------------------
  
  SQL > select * from sys.hs_fds_class;
  
  FDS_CLASS_NAME
  FDS_CLASS_COMMENTS
  FDS_CLASS_ID
  
  BITE
  Integrated Test environment
  1
  
  ------------------------------------------------------------------------------
  
  SQL > show parameter global_names;
  
  VALUE OF TYPE NAME
  global_names boolean FALSE
  
  ------------------------------------------------------------------------------
  
  SQL > select * from SIMSwap@csstat;
  Select * from SIMSwap@csstat
  *
  ERROR on line 1:
  ORA-28545: error diagnosed by Net8 when connecting to an agent
  Cannot retrieve the text of the message NETWORK/NCR 65535
  ORA-02063: preceding 2 lines of CSSTAT
  
  ------------------------------------------------------------------------------

  you use the Oracle Listener database in C:\oracle\product\10.2.0\db_1\ to spawn TG4SYBS installed in a different House: C:\oracle\product\10.2.0\tg_1. This works when you specify the full path in the listener.ora to tg4sybs executable file. The section of SID might look like:
  (SID_DESC =
  (SID_NAME = csstat)
  (ORACLE_HOME = C:\oracle\product\10.2.0\tg_1)
  (PROGRAM = C:\oracle\product\10.2.0\tg_1\tg4sybs)
  )

  Then STOP and START the listener and try again.

• The bottom left of the Satellite L500 gets hot

  I have tried to understand it, but can't find any decent help on that.

  I have a 5 years old toshiba Satellite L500 and continues to get very hot on the lower left side. Now, I know that my hard drive is in the bottom right and this side never gets hot. So what I need to know is really what the balls - what is getting hot at the bottom left?

  I can't find patterns that can tell me exactly which part is which on the inside, so I have no idea of what gives me questions when I'm using the internet or play games. I have a fan in my laptop and it is on a surface of grated so air can get to it easily. The problem lies in the lower left hand side.

  As is - this does anyone have an idea why the low 1-1, 5 cm my screen gets too hot? It would be great! Thank you.

  As a writer, it is very worrying that these things as I need my laptop to stay alive for a year or two. (Cannot afford a new and use it for literally everything I do...)

  > So what I need to know is really what the balls - what is getting hot at the bottom left?
  How about the vents?

  The left side for laptop contains cooling grids, and you will find the cooling fans.
  Hot air flow by the left hand side so the surface s mobile is hot

• Cannot start the satellite M35X

  Hi all.

  Cannot start my Satellite.
  When I push the power button, it turns on, the blue led is ok but the HDD led blinks 1 or 2 times or it happened when it is not clear at all and put the laptop off, but the power button remains lit.

  However, from time to time, it starts up, shuts down load the XP but after 1 minute.

  I have reinstaled recently the WinXP, and I did a bios update. Before that, the laptop didn't have this behavior, however, the XP raported me that the hard drive is faulty.
  I figured it is something related to the HARD drive.
  What should I do?

  How can I be sure that the HARD disk is wrong?

  Hi mate,

  If your HARD drive has bad sectors, you must exchange it ;)

  For example before doing this, you can check for bad sectors using specific diagnostic tools HDD as Drive Fitness Test:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  Here, you can download an image file to create a boot disk. Then boot from it and to start the test, it is quite easy! ;)

  If your HARD drive is faulty, this tool should recognize this.

• Cannot restore my Satellite L500 - 19 X

  Hi guys,.

  I recently bought a new Satellite L500 - 19 X.
  Had no real problems, until the battery died last night and now it won't start Windows at all.

  When I turn it on it comes up with "Start Windows normally" and "Launch Startup Repair tool" options. If I try to fix loads some files then goes to a black screen with the mouse. If I start windows normally he tries a fair bit and goes back to these two options.

  From what I've seen a lot of people have had similar problems, o all of sugested solutions have been in vain for me however.

  Could not load safe mode. Tried using the recovery disk that was provided and that brings just the same black screen with the cursor. Also tried booting the system without the bttery etc., which also did not work.

  I am (or at least try to run) running windows 7, which is already installed on the hard drive.

  For any help or suggestions would be greatly appreciated, Ive pretty much has everything well tried.

  Bravo for your time. Any help would be great.

  Hello

  Hmm. you have a courier flashing in the upper left corner?
  It looks more like a HARD drive problem or a partition

  But try this:
  Switch on and press F8.
  Then choose fix my computer and then choose (if possible) HARD drive recovery.

  If this is not possible then go into the BIOS and check if the HARD drive is recognized (all details should appear).
  If the HARD drive is not recognized, then this would mean that your HARD drive is defective.

  If the HARD drive is recognized then it might be something wrong with a partition on the HARD drive

  In this case, you can try to create a WinPE bootable system diskette:
  http://en.Wikipedia.org/wiki/Windows_Preinstallation_Environment

  Then the could format the HARD drive again and after that who could use the recovery disk to reinstall Windows 7.

  Welcome them

• Cannot connect my Satellite L500-1WG to Wi - Fi router Netgear

  Hello

  I hope someone can help as Im pulling my hair out. Just replace an old Wireless ADSL router/modem to a "n" wireless Netgear DGND 3300 range Max Dual Band router ADSL. Everything is connected by ethernet to my Office PC Ok. Just bought a laptop L500-1WG with 'n.' compatible wireless card

  Hope to connect to the 802 1.1n 5 Ghz to speed things up and increase will however the laptop cannot find the adapter 2.4 Ghz 'G' and its driving me wild! Ive downloaded the latest drivers and checked in the device manager that "n" is selected. I messed around with the settings of the modem to the router and it seems to all be OK but can not connect, someone at - it ideas? Thought I would have the ability to connect via G or N...

  Your help is appreciated...

  And what is with the settings of the WLAN router? You are using auto option or you have assigned it N only?

• Cannot retrieve the Portege R100 by using the recovery CD

  I replaced the HARD drive on my R100 not having the original. Thank you to help on the forum, I managed to solve a CDROM with a PCMCIA connector.

  I got through the recovery screen and choose option 1 - retrieve the entire disk. He got a disc of part way through 1 when he did not play a file. I then ran it again, but the selected option 2 - Toshiba Recovery utility and it started and then failed with the error - "cannot open TOSH_REC. COMMITTED AN ERROR."

  Where else?

  Thank you

  Ian

  Hello

  Have you replaced it with all new HARD drive? It's very strange question and if the HARD drive is nine something like that shouldn't happen. You have the FDD to check the HDD with FDISC? Please use the floppy drive and boot the disk to check the new HARD drive.

  Somehow, I feel that there is something wrong with this new HARD drive.

• How to operate the Satellite L500 webcam?

  How to open and operate a webcam Toshiba Satellite L500?

  Start preinstalled web Application camera and you have control over the webcam.

• That Win 7 (32-bit or 64-bit) is pre-installed on the Satellite L500?

  Hello

  My Webcam does not work and I tried to download a new driver.
  For this I need to know how many Bits (32 or 64) my laptop has. Where can I see this?

  I have a Satellite L500, Windows 7.
  Thank you very much!

  Hello

  Try this:
  -In run type msinfo32.exe and then press enter
  -In system information, you will see the PC focuses on x 86 or x 64
  X 86 32-bit and x 64 means means 64-bit ;)

  Hope this is what you need to know