Cannot run Cisco ACS Patch 5-7-0-15 - 1.tar.gpg

Similar Questions

• ACS 5.2 patch 5-2-0-26 - 2.tar.gpg

  Hi all

  Anyone successfully installs patch 5-2-0-26 - 2.tar.gpg 5.2 GBA? After downloading the patch of my deposit of tftp I got the error message:

  ACS patch install 5-2-0-26 - 2.tar.gpg repository tftp
  chmod: cannot access at the "* .sh ': no such file or directory".
  Patch not valid 5-2-0-26-2.tar.gpg'-missing install.sh
  % Error: failed to open / validate the patch

  I tried to download the patch on Cisco's Web site twice with the same result. I also tried patch 5-2-0-26 - 1.tar.gpg does not. It seems to be no mistake on the site of the tftp server (I use 3CDaemon).

  Thank you very much for your answer.

  Yours sincerely,

  Zdenek Rottenberg

  Yes, I installed the Update Rollup 2 without error but I'm not using TFTP FTP with anonymous, have you tried to download the file with a TFTP client, this is the first time use you TFTP to ACS?

• Cisco cisco ACS patch location site

  Hello

  I want to install cisco Acs 4.1 and I'm looking for the location on the Web site for patches can you please give the path?

  Thank you

  For ACS for windows:

  http://www.Cisco.com/cgi-bin/tablebuild.pl/ACS-win-3DES

  For ACS SE:

  http://www.Cisco.com/cgi-bin/tablebuild.pl/ACS-Soleng-3DES

  Kind regards

  Prem

• Cisco ACS patch

  I need to patch our ACS server at 4.2.0.124.6 4.2.0.124.17. My question is, do I need to apply the patch even to our remote agents? Cisco documentation indicates only that both the ACS and the Remote Agents must be 4.2.0.

  I just want to confirm.

  Thank you!

  Hello

  Well Yes, the ACS and RA, version including the patch must be same.

  I hope this helps.

  Kind regards

  Anisha

  P.S.: Please mark this thread as answered if you feel that your query is resolved. Note the useful messages.

• Cannot save changes to cisco ACS 5.8

  Hello

  I have a problem with save to Cisco ACS. I'm not saving with the button "save changes". It's hide. Please help me. Thank you

  Look at more pictures, looks like you are using firefox version 46.

  If yes you must down load and install 5.8 patch3 which includes fixes for specific problems seen when working with this version of the Firefix browser

• Cisco ACS SE GANYMEDE + accounting fails

  Hello

  I'm under Cisco ACS SE 4.1.23.5. My problem is that the ACS don't Jrnl of the remote switches. I have configured the following accounting commands:

  AAA accounting exec default start-stop Ganymede group.

  orders accounting AAA 0 arrhythmic default group Ganymede +.

  orders accounting AAA 15 by default start-stop Ganymede group.

  Default connection accounting AAA power Ganymede group.

  When I enable aaa accounting debugging, I get the following logs on the switch.

  001091: 12 sep 12:06:06.464 TSB: AAA/ACCT: user johndoe, acct type 3 (2684940942): method = Ganymede + (Ganymede +)

  001092: 12 sep 12:06:06.665 TSB: TAC +: (2684940942): received the status of response acct = SUCCESS

  001093: 12 sep 12:06:11.128 TSB: AAA/ACCT/CMD: user johndoe, tty2, 15 private Port:

  'show running-config '."

  001094: 12 sep 12:06:11.128 TSB: AAA/ACCT/CMD: find the "default" list

  001095: 12 sep 12:06:11.346 TSB: AAA/ACCT: user johndoe, acct type 3 (1583033889): method = Ganymede + (Ganymede +)

  001096: 12 sep 12:06:12.000 TSB: TAC +: (1583033889): received the status of response acct = SUCCESS

  001097: 12 sep 12:08:16.303 TSB: AAA/ACCT/CMD: user johndoe, tty2, 15 private Port:

  ' configure terminal '."

  001098: 12 sep 12:08:16.303 TSB: AAA/ACCT/CMD: find the "default" list

  001099: 12 sep 12:08:16.303 TSB: AAA/ACCT: user johndoe, acct type 3 (1098049616): method = Ganymede + (Ganymede +)

  001100: 12 sep 12:08:16.504 TSB: TAC +: (1098049616): received the status of response acct = SUCCESS

  001101: 12 sep 12:08:29.884 TSB: AAA/ACCT/CMD: user johndoe, tty2, 15 private Port:

  It seems that the switch is well a response but the CSA record. I have updated the ACS for the latest patch (4.1.23.5), which is supposed to resolve this known bug.

  Is there something that I am missing?

  Thank you.

  ESD

  And what you get in the newspapers of Ganymede Administration?

  Kind regards

  Prem

• Cisco ACS: page not displayed not!

  I installed Cisco ACS v 4.1.While through the different tabs, suddenly, I got the page written common IE "this page cannot be displayed".

  It is all of a sudden in the meantime & there is no expiry/delay period while working on it.

  Server: HP DL380G5

  OS: Win2k3 Enterprise Edition SP1

  Kindly guide me!

  Rajeev,

  Add the DCC address in Internet Explorer trusted sites. Also check if the acs services are up n running, especially csadmin.

  Kind regards

  ~ JG

  Note the useful messages

• Cisco ACS 4.2: The most important to back up files?

  Dear Sir

  Can you tell me what are the most important files to back up in the Cisco ACS directory?

  Currently, I am only backup (with Symantec Backup Exec):

  C:\Program Files\CiscoSecure ACS v4.2\CSAuth\System backups

  * But, I would like to know if my server crash, can I restore the entire configuration with the files listed in the directory below? (Users, groups, groups of devices, AD, mapping, users, groups,...)

  * The Cisco ACS there change in the Windows registry?

  * Is it necessary to reinstall the Cisco ACS, if I need to put in an emergency on a new server? I guess Yes, because the installation creates services, etc.

  I ask this question because it takes time to install the patches...

  * Or, can I save all the Cisco ACS directory... On a new server, install the Cisco ACS and restore the backup?

  Thank you very much for giving me your experience about it.

  Kind regards

  You should back up the files that come from ACS backups, i.e.

  System configuration > backup GBA, the location that is specified in this section.

  And the default location is the one that already save for example "C:\Program Files\CiscoSecure ACS v4.2\CSAuth\System backups"

  In case you are required to host ACS on a new server, you would be required to re - install the complete application of the CSA and then simply take the last backup and restore in the newly installed ACS. It will be to restore everything users, group etc. to etc. of the external database mappings.

  When you install ACS on a new server, then make sure that if you run them Services ACS with a service account (this is required for the authentication of the window according to your requirement), you would be required to run new services with this account too, and which may require that go you through the following documentation.

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/installation/guide/Windows/postin.html#wp1041202

  Kind regards

  Prem

  Please rate if this can help!

• The upgrade to Cisco ACS SE and Remote Agent

  Hello

  Currently we are upgrading the PDC to Windows Server 2008, Standard Edition R2.

  I am little confused with information available for upgrade scenarios. Appearing on the current working versions.

  Cisco ACS SE - version 4.1 Build 23 5 Patch 1

  Cisco ACS Remote Agent version 4.2 (0.124)

  The new operating system will work on 64-bit, I think that the current ACE SE and the remote agent can / must be upgraded.

  My existing versions, give the possible scenarios of upgrade available for me. After that upgraded SE and Remote Agent should work for the 64 bit OS.

  Thanks in advance!

  Yes, it is not possible to upgrade the ACS ACS 5.2 existing to level 4.1. They are two different boxes run on a different platform.

  Unfortunately ACS 4.x does not support windows 2008 r2.

  5.2 ACS is the only option left, and you will need to buy a new box of seprate with the new licnese for this.

  Concerning

  Bellefroid

  Note the useful messages

• Cannot run Mechwarrior 4: vengeance on a Windows XP Home Edition Service Pack 3

  Original title: cannot run Mechwarrior 4: vengeance on a XP machine.

  I installed my copy of Mechwarrior 4: vengeance on a machine with Windows XP Home Edition Service Pack 3.  The game seems to install properly, no error, but when I try to run the game it just splashes image loading on the screen and then does nothing.  I have tried to install the latest patch/update from the site Web of MW4, tried running in compatibility mode, and nothing seems to work.  Any help on this will be greatly appreciated.

  Hi CloakingBrotter,

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you follow the article in the Microsoft Knowledge Base and check if it helps.

  Game hangs or quits unexpectedly

  http://support.Microsoft.com/kb/303032

  Method 2: I suggest you check for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Procedure to view and manage event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

   

  I hope this helps.

• Problem with certifcate on Cisco ACS

  We want to authenticate our internal wireless users using our Cisco ACS running 5.3.  GBA questions our Active Directory environment for the user name and password provided.  I created a CSR on GBA and it provided to Entrust.  They gave me a root certificate, string and server.  I've linked the server certificate to the CSR under System Administration > Local Server Certificates > local certificates.  I then added the chain and the root certificates to the users of the site and identity stores > autorit├⌐s.  When I try to connect to a laptop client he asks a user name and password, but after entering this information, I am presented with the warning on this certificate below.  This certificate is to Entrust and I see the certificate root in the root store on the laptop.  Any ideas what would cause this.  TAC does not seem to have all the answers.  They say it's a problem of the client machine.

  

  In case you want to check your configuration settings.

  http://www.Cisco.com/en/us/products/ps10315/products_configuration_example09186a0080bd1100.shtml

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• Cisco ACS 5.8 CLI admin account lockout

  Hi all

  We recently deployed device Cisco ACS 3495 and running on a version 5.8.

  Everything seems well while our for the CLI admin account was locked out.

  Found a bug in Cisco for the same problem with version 5.5, but no solution yet...

  ACS 5.5 CLI Admin account locked and no Log Message
  CSCur37203
  Someone out there who might have encountered the same issue and can help advise?
  Thank you and best regards,
  NDA

  Hello

  Unfortunately, the only solution for this is the DVD of password recovery.

  Once fixed, you can increase the car locked out amounted to something greater than the default value of Cisco.

• 5.4 double certificate option Cisco ACS

  Hello Experts

  I wonder if anyone knows if I can get two certificates on my Cisco ACS 5.4 server. The documentation says I can have it as long they have different 'from' and 'to' dates with a same name CN. However, this is a production server and wanted to if sure before I make changes. I currently have a certificate installed and everything works well but need to add a second for migration purposes.

  Hovsep Armeni
  LAN, UK

  A certificate can be linked to these two services (HTTP and EAP), however, each service can only be associated with a single certificate. Thus, for example, you cannot have two certificates that are related to the EAP process.

  Thank you for evaluating useful messages!

• Cisco ACS 5.7

  Hello

  I have a question, I would spend 5.5.0.46.1 ACS ACS 5.7 However Cisco told to install the required patches, but they don't specify what exactly is mandatory patches?

  The ACS is installed in a virtual environment.

  Install a clean within 5.7 ACS work however a migration from 5.5 to 5.7 and Cisco provides all of the solutions for a virtual ACS.

  Thank you

  Caleb

  Hi Caleb,

  ACS patches are commulative, so you can install patch 8 without having to install a previous patch.

  Kind regards

• Cisco ACS 4.1 for external advertising for authentication

  Hello

  We have just configured Cisco ACS 4.1 solution engine and using a Windows 2003 domain controller as a remote agent.we use as Protocol Ganymede.

  Users that are created in ACS himself are able to connect to various network devices. but users in domain (active directory) can not connect. We get the access denied message. same time we get external DB is not operational message in ACS.

  Active directory server where agent that runs in CSWINAgentlog, we get the following error 'NDLIB'... FOUND 0 TRUSTED DOMAIN.

  Could you please help us to isolate the problem.

  Thank you & best regards

  Make sure that the worm of acs and remote agent software is the same. And also execution of remote agent account must have special domain administrator rights, like the act as part of operating system and log in as a service.

  Kind regards

  ~ JG