5.4 double certificate option Cisco ACS

Similar Questions

• Renew the certificate in Cisco ACS for PEAP authentication

  Hi, we installed in laptops wireless customer a certificate created by Cisco ACS to authenticate, but its about to expire.

  How can I do to renew the certificate whithout affecting users.

  (1) Yes, we can generate a new cert but install the latter.

  (2) install generated new cert on the client.

  (3) install the new cert in ACS.

  Good plan and will probably work.

  Kind regards

  ~ JG

  Note the useful messages

• Cisco ACS 5.4 Support Wildcard SSL certificates?

  Greetings,

  Is getting ready to order a SSL certificate for my ACS 5.4 newly installed, and before I did that I want to check if 5.4 ACS supports Wildcard SSL.

  Someone help me with this?

  Thank you!!!

  Chris B.

  Hi Chris,

  ACS 5.4 still does not support wildcard certificates.

  Regrads

  Anubhav Gupta

• [Cisco ACS 5.2] EAP - TLS authentication failure

  What we are e

  Hello

  I set up a WiFi connection on Windows XP and Windows 7 with EAP - TLS (using Cisco WLC 7.0.235.3 and Cisco ACS 5.2.0.26.10). It is configured with the authentication of the computer and computer certificates are automatically registered for Microsoft PKI.

  It works well!

  Now, I configured Windows 8 with the same configuration.

  First authentication works, but if I manually disconnect and reconnect, I got this error on ACS: 22047 username main attribute is missing from the client certificate

  In the EAP packets, we could see that Windows 8 sent a TLS session but ticket session has not properly taken over by ACS...

  Configuration of the ACS, we checked the option "enable EAP - TLS Session resume' with the session timeout"7200 ".

  I found this bug

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId= CSCtn26538& from = summary

  It seems to be my problem but the reboot does not work in my case...

  It is set at 5.3 (0.40.2).

  I plan to install version 5.4.

  Do you know if this fix is supported by 5.4?

  Thanks for your help,

  Patrick

  Hi Patrick,

  What is set in point 5.3 must be set in point 5.4.

  Even if the same issue appeared with 5.4 there an ID different bug and identified as an independent issue (with different causes, usually)

  HTH

  Amjad

  Rating of useful answers is more useful to say "thank you".

• Problem with certifcate on Cisco ACS

  We want to authenticate our internal wireless users using our Cisco ACS running 5.3.  GBA questions our Active Directory environment for the user name and password provided.  I created a CSR on GBA and it provided to Entrust.  They gave me a root certificate, string and server.  I've linked the server certificate to the CSR under System Administration > Local Server Certificates > local certificates.  I then added the chain and the root certificates to the users of the site and identity stores > autorit├⌐s.  When I try to connect to a laptop client he asks a user name and password, but after entering this information, I am presented with the warning on this certificate below.  This certificate is to Entrust and I see the certificate root in the root store on the laptop.  Any ideas what would cause this.  TAC does not seem to have all the answers.  They say it's a problem of the client machine.

  

  In case you want to check your configuration settings.

  http://www.Cisco.com/en/us/products/ps10315/products_configuration_example09186a0080bd1100.shtml

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• Cisco ACS 5.2 with NX - OS (Nexus) devices user - questions

  Hey, I have a really strange problem with Cisco ACS 5.2 and Nexus NX - OS devices.

  I create an account on ACS, let's call him User1 and give privilege 15. With User1, I am able to access on all our IOS, IOS - XE, ASA and PIX devices with privilege 15.

  When I use the User1 account in our NEXUS devices, I do NOT receive the access privilege 15. As you probably know, the NEXUS devices have roles: predefined or custom roles. So I assumed I would get the role of "network-admin" (15 private read/write) User1 when you connect, but instead I got the role of 'vdc-operator' (private 1 read-only).

  Then I tried to twist User1 and give network-admin under profile Shell > Custom Attributes. I logged in the NEXUS and of course I was able to get a network-admin access. However, my access to ALL other devices (IOS, ASA, PIX, etc.) does NOT work! I am not even able to connect with my login and my password for these devices.

  Has anyone ever experience this problem? Help, please!

  Thank you

  neocec

  This is a common problem when you mix with RBAC and IOS devices authorization policies, the pair av that you created must be set 'optional' instead of 'compulsory', please make this change and you will be able to access all your devices.

  Thank you

  Tarik

• Cisco ACS 4.1 - user profile changes

  There is no option in Cisco ACS 4.1 Solution where we can specify the option that "user must change password on the next logon" as it used to be in Cisco ACS 3.X ".

  Is it possible same functionality can be enabled on Cisco ACS 4.1

  Concerning

  Sohail Sarwar

  Hello

  That option does not exist in ACS 4.x.

  HTH,

  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• Cisco ACS, multiple CA, assignment of VLAN relevant to the domain

  Hi all

  I searched for a solution to a specific customer requirement.

  I want authenticate users with certificates from different RootCA wireless and assign them to one VLAN based on their field?  Ideally, using the same SSID and a Cisco ACS server.

  Is this possible?  Has anyone seen that it works?

  I realize that the ACS can have trust company for the relevant RootCA (dunno what version is needed for this?).  And that assignment VLAN is also possible to a unique SSID based on RADIUS attributes.  But I am not sure that these parts would fit together?

  Would appreciate some advice!

  Thanks in advance

  Rob

  Hello

  Yes, this is possible. I suggest that you implement one by one to make sure that everything works, but no problem to do so. All recent versions of ACS allow this.

  You can do mapping group from ad groups (a group for each area, so if you want to) and assign the vlan based on the mapping of this group.

  GBA can trust several certification authorities and authenticate users with certificates of all these cases. It's just a matter of import these number certificate in the trust list.

  And you can assign the vlan and use only one ssid as well.

  I can't guide you on the procedure that it depends on which version you have and if you have IOS ap or WLC, but it is basically each function separated as in the config Guide and just used all together.

  Nicolas

  ===

  Remember responses of the rate that you find useful

• The upgrade to Cisco ACS SE and Remote Agent

  Hello

  Currently we are upgrading the PDC to Windows Server 2008, Standard Edition R2.

  I am little confused with information available for upgrade scenarios. Appearing on the current working versions.

  Cisco ACS SE - version 4.1 Build 23 5 Patch 1

  Cisco ACS Remote Agent version 4.2 (0.124)

  The new operating system will work on 64-bit, I think that the current ACE SE and the remote agent can / must be upgraded.

  My existing versions, give the possible scenarios of upgrade available for me. After that upgraded SE and Remote Agent should work for the 64 bit OS.

  Thanks in advance!

  Yes, it is not possible to upgrade the ACS ACS 5.2 existing to level 4.1. They are two different boxes run on a different platform.

  Unfortunately ACS 4.x does not support windows 2008 r2.

  5.2 ACS is the only option left, and you will need to buy a new box of seprate with the new licnese for this.

  Concerning

  Bellefroid

  Note the useful messages

• Cisco ACS server

  Hello

  I currently have a Cisco ACS 3.3 Server. I want to upgrade the server to the latest version and cluster with one another so that we can have a redundant infrastructure because if one fails it also includes...

  Can provide you a solution for this?

  Thank you

  Hello

  The latest version is 4.1 ACS. You can upgrade 3.3.3 build 11 directly to 4.1.

  Then, you can install an another ACS 4.1 on a different machine and replication configuration between these two. In this way, you will need to make changes to only one that ACS and the secondary will be automatically updated.

  Once these two are defined, you can set both of these servers as a server Radius/Ganymede on devices and there will be a redundancy.

  Kind regards

  Vivek

• How can I use Cisco ACS to save Shell commands

  Hi guys, pleeeease how can I configure Cisco ACS to do command authorization on my Cisco 3660 router. I get the accounting logs and authentication but no newspaper that show orders issued by users - shell and it's the most important paper that I need. I read materails and download articles on the site of Cisco... but the thing is still does not give me the papers.

  I have these lines on my router:

  ...

  AAA authorization config-commands

  AAA authorization exec default group Ganymede +.

  AAA authorization commands 15 default authenticated if

  AAA authorization network default group Ganymede +.

  ...

  It's funny, when I turn on debugging of the authorization of the AAA on the router, it shows me every command being sent by the user on the debug log. But nothing shows under Administration TACAC + on the Cisco Secure ACS. What is responsible for this?

  *****************************************************

  I installed the trial version of the Cisco ACS 90 days and made all necessary settings and I have to say I like what I see already. I'm opening moves to recommend the product to purchase. Thank you guys, I got about the features of this ACS software through this forum, keep up the good work. I recommend the software for those who need to have adapted to the management reports Security Audit logs.

  If I understand what you're asking correctly, the answer is not in the authorization, that it is in accounting. I set up on my routers and send to ACS orders that level 15 privilege users enter on the router.

  orders accounting AAA 15 by default start-stop Ganymede group.

• Cisco ACS 1113 appliance v4.1 - integration of RSA Securid v6.1

  The Windows of Cisco ACS version seems to have the ability of integration with RSA Securid its listed in external databases. It can also support the SDI Protocol if you install the agent on the Windows ACS platform. I need to use a Cisco ACS 1113 but RSA Securid does not appear in the section external databases. This mean that I won't be able to use the SDI Protocol only available RADIUS.

  And Yes you are right,

  With ACS, we need to configure using RADIUS, on ACS SE it won't work with SDI.

  Kind regards

  Prem

• Problem with Cisco ACS and different areas

  Hello

  We are conducting currently a problem with Cisco ACS that we put in place, and I'll try to describe:

  We have ACS related directory AD areas, where we have 2 domains and appropriate group mappings.

  Then we have our Cisco switches with the following configuration,

  AAA new-model

  AAA-authentication failure message ^ CCCC

  Failled to authenticate!

  Please IT networks Contact Group for more information.

  ^ C

  AAA authentication login default group Ganymede + local

  AAA authorization exec default group Ganymede + local

  AAA authorization network default group Ganymede + local

  AAA accounting exec default start-stop Ganymede group.

  orders accounting AAA 15 by default start-stop Ganymede group.

  !

  AAA - the id of the joint session

  But the problem is that with the users in a domain, we can authenticate, but not the other. Basically, the question is that when we check on the past of authentication, two authentications are passage and the display of 'Authentic OK', but on the side of the switch, there is a power failure.

  There may be something wrong with the ACS?

  Thank you

  Jorge

  Try increasing the timeout on IOS device using radius-server timeout 10.

  Do we not have journaling enabled on the ACS server remotely?

  -Philou

• Cisco ACS 5.8 CLI admin account lockout

  Hi all

  We recently deployed device Cisco ACS 3495 and running on a version 5.8.

  Everything seems well while our for the CLI admin account was locked out.

  Found a bug in Cisco for the same problem with version 5.5, but no solution yet...

  ACS 5.5 CLI Admin account locked and no Log Message
  CSCur37203
  Someone out there who might have encountered the same issue and can help advise?
  Thank you and best regards,
  NDA

  Hello

  Unfortunately, the only solution for this is the DVD of password recovery.

  Once fixed, you can increase the car locked out amounted to something greater than the default value of Cisco.

• How to restore the password on Cisco ACS 5.4

  Hello!

  Try to restore the Cisco ACS 5.4 password installed on vmware. Where can I get the password recovery DVDs? There is no software in the list on the site.

  TAC may provide to you. You will need to open a folder and the application.

  HTH