Cannot run msiexec even as an administrator

Similar Questions

• "Printer properties cannot be displayed. The print spooler service is not running. "(even when it works)

  When I click with the right button on a particular printer and try to view the properties of it, I get the following message:

  Printer properties cannot be displayed.  The print spooler service is not running

  It is, it is run as go to-> Services administrative tools in the Control Panel checks.

  One of the 'printers', I installed is "send to OneNote 2007".  I can click right on this very well - just not this another printer. I'd be able to do if the print spooler is not running?

  Indeed, if I turn off the print spooler, * all * printer in "Printers and faxes" disappear.  So the fact that I'm still see them first place suggests to me that the printer spooler is running.

  I posted this on Microsoft.public.windowsxp.general a while ago and someone suggested that I visit this site .  Problem is C:\WINDOWS\system32\spool\PRINTERS is empty.  It is empty when the print spooler is running and it is empty when it is not.

  Also, I was unable to install KB896423 since I am running SP3.  Try to install he did the following:

  Setup has detected that the version of Service Pack for this system is newer than the update you are applying.

  There is no need to install this update.

  The printer is a "local printer attached to this computer" connected via a "Standard TCP/IP Port".  Personally, I think such a printer should be called "a network printer or a printer attached to another computer", but that is the terminology used by the "Add Printer Wizard".

  Hello terrafrost,.

  Thank you for visiting the Microsoft answers community.

  What is the model number of the printer that you are using?

  Printing a "Standard TCP/IP Port, is used for a printer that is directly connected to a network, not on your local system.

  I would try to uninstall your printer and reinstall your printer.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot run AVG on the computer due to Restrictions of the administrator

  Original title: avg

  Cannot run AVG on the computer due to modifiable Restrictions, how can you

  change this?

  Hello

  1. is your computer connected to a domain network?

  2 are connected to your computer by an administrator or the comments?

  3 is the issue limited to the AVG program?

  Please answer us with more information about the issue to help you.

  If your computer is not connected to a domain network, you are not logged on the administrator account, you can try the connection in Administrator account, open AVG and check.

  Check out these links:

  What is an administrator account?

  http://Windows.Microsoft.com/en-pH/Windows-Vista/what-is-an-administrator-account

  How to apply once with a full administrator access token?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-run-an-application-once-with-a-full-administrator-access-token

  I hope this helps!

• Why my iMac (27 inch, mid 2011) cannot run Windows 10 in boot camp? And if he can't, he would work in something like parallels?

  Why my iMac (27 inch, mid 2011) cannot run Windows 10 in boot camp? And if he can't, he would work in something like parallels?

  To be honest, Windows 10 is compatible with your Mac, but Apple does not release from Windows 10 drivers for it. There are various guides on the Internet to install the drivers for Boot Camp Windows 10 even if your Mac is not supported, but follow them at your own risk (don't forget that you won't receive help to make).

  However, you are free to run Windows 10 on a virtual machine. To do this, you can use Parallels, VMware or VirtualBox, but remember that a virtual machine will give you less performance than Windows natively on your iMac. Read-> Windows in BootCamp or Virtual Machine?

• Cannot run Windows Update from the PC that was previously on a domain.

  Original title: cannot run Windows Update

  I got my PC of my former company with a local login. However, the PC has been joined to a domain. The company no longer exists, but because the PC has submitted to its group policies, I can't run Windows Update. Is there a way around this problem? Thank you.

  Strongly suggest that you contact the administrator of the domain so that it can correct or remove strategies group that are applied to the system.

  In addition, ask the installatiion Media for the edition of Windows installed if you don't have it now.

  MowGreen Services update - consumer safety

• Windows cannot run disk checking on this volume, because it is write protected.

  I can't get the start menu appears in safe mode then I have botted on a cd with the command prompt and when I type chkdsk/r, so, it gives me "windows cannot run disk checkingo n this volume because it is write protected."  Can someone tell me what I can do to fix this?

  If you encounter a problem that you need help, follow these steps:

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  What you see you don't think you need to see?

  What do not you think that you should see?

  Fill in the blank: my system worked well until: _.

  If you just want to start by running chkdsk /r on your hard drive (a good idea), I would follow the instructions below:

  Use the XP Recovery Console to check the file system on your HARD drive and fix all the problems.

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  Start by checking the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• We see disable my working group in the properties of my computer, we cannot run network in my office

  We see disable my working group in the properties of my computer, we cannot run network in my office

  Some things that can cause this:

  1. you are not logged in as administrator.

  2 - the Client for Microsoft Network is not installed Properties Control Panel/Network Connections/Local Area Network)

  3 - the workstation service is not running.

  John

• Error message: "cannot run from limited user account" using flight simultor 2004

  Original title: have been using flight simultor 2004 for several years, all of a sudden FS9 does not start. Windows XP - e

  use for several years, that all of a sudden FS9 does not start. error message says cannot run a restricted user account, log in as an administrator, but I am administrator and we tried to switch users without result. -any ideas please? Windows xp

  Hi Sethshaw,

  1. did you of recent changes on the system?

  You can create a new user account and check if the game works.

  How to create and configure user accounts in Windows XP

  If you are not faced with the question, you can visit the following link to resolve the damaged user account.

  How to recover damaged Windows XP user profile

  Hope this information is useful.

• Chkdsk cannot run because the volume is in use by another process

  My computer was working fine until last night. Now when I connect I get a blue screen saying that the computer shuts down to prevent further damage from happening. I tried to restore to an earlier point in time when my computer was working but then I get the error:

  The OS disk (C :) has errors.
  Windows has detected corruption on OS (C :) file system. You should check the drive for errors before you can restore it.

  So I'm going to run the chkdsk utility, and I get the error:
  Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts.

  I'm confused because the chkdsk unility usually works, and I have no idea why she is being used by another process. I am clearly not very good with computers. I tend to do a lot of spywear and adwear on my computer. I have Spyware Doctor that removes any infection.

  Help, please. I've tried everything. Thank you.

  Asha22,
  It appears from your last post why chkdsk did not run on reboot and you gave an incorrect message is that you did not a space between the volume and the f number.  The correct syntax is:

  CHKDSK c: /f

  You can also run the utility disc in this way:
  http://windowshelp.Microsoft.com/Windows/en-us/help/bc1393cf-9f9c-79C7-0f91-9337c2c41f811033.mspx

  1. open the computer by clicking the Start button, click computer.
   
  2. right click on the hard drive you want to check, and then click Properties.
   
  3. click on the Tools tab and then, under check for errors, click check now.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.

  To perform a full disk check, select search and attempt to recover bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.
   
  4. click on start.
   
  Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  Note: If you select automatically errors in file system of fix for a disc that is used (for example, the partition that contains Windows), you will need to reschedule the disk check for the next time you restart your computer.

  The reason that it says that the disk is in use by another process is because it is in use by the operating system (Vista), and that's why it must be run at startup, before the operating system loads fully.

  Another utility, you need to perform is the System File Checker, if you can get your computer to start, either normally or in Mode without failure.
  To run the System File Checker tool, follow these steps:
  Click Start and type cmd in the box start the search.
  Right click on cmd in the list programs, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  At the command prompt, type the following line and press ENTER:
  sfc/scannow
  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  Let us know what these tests are and how we can also provide assistance.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot run Onecare Virus Scan error 0x8DDD0002

  I have read suggestions from a clean start on my system; However, I can't get past the first step.  for upade and do a security sweep. Jose I get:
  [Error number: 0x8DDD0002]

  To install the updates from this site, you must be logged in as an administrator or a member of the Administrators group on your computer. If you use Windows XP, you can see if you are an administrator by clicking onuser accounts in Control Panel. Note: If your computer is connected to a network, network policy settings may also prevent you using this website. Contact your system administrator with the updates. We're sorry. This version of the Windows Live OneCare safety scanner does not work with your operating system or Web browser. You have family need to Windows XP Edition, Windows XP Professional, Windows 2000 Professional, Windows 2000 Server, Windows Server 2003, Windows Vista, or Windows 7. You also need Microsoft Internet Explorer 6.0 or MSN® 9.0 or higher. What can you do? ·       User of Windows Vista or Windows 7? Download the edition of Windows Vista and Windows 7 the scanner here ·       Get the latest version of Internet Explorer (free download) ·       Upgrade your operating system ·       Download PC help in the community ·       Go to our service center for tips and tricks

  Hi buzybeegirl,.

  Thank you for your message.

  I got the error on my first visit, to see that I was not using Internet Explorer.

  You can check by clicking on the Start button and type "internet explore" on writing that appears in the form of "Internet Explorer".

  If this does not work, try right click on the entry that appears, and then click Run as administrator.

  Even if your account is the Admin account, you will likely worsen your credentials in this way to run a program as an administrator.

  I was also able to recreate the issue on my first visit to the site by using Internet Explorer Onecare.live.com.

  I looked at the address of the error page (in the address bar) and she had identified my OS XP, something like "osunsupported = XP.

  So, I use Windows 7...

  I tried a few times over, and it worked.

  I can't recreate the failure of identification of operating system now that he's worked.

  I'll see if I can find more information about this, and if I do, I will post it here.

  In the meantime, see if the suggestions made above will work.

  Please let us know how it works.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HELP | J4580 Windows 8 install fax printer. Cannot run or AIO Win7 or XP in Win8 installation program.

  Product name & number: HP J4580 All in One (Fax, printer, copier & Scanner)

  Operating system: Windows 8 Professional

  Cannot run everything in a single installer Win7 or XP with or without compatibility under Win8. The printer & scanner was installed by Win8 itself by using windows update. But unfortunately, I can't do how to install the fax printer. You also need to configure fax to PC as it is very vital for me to keep track of all incoming faxes.

  Any help will be much appreciated.

  I was able to get this sorted out by running the installer as an administrator in addition to the Win7 compatibility check box. Without run as administrator, after clicking on the button install, nothing happens.

• "Run as another user or administrator" on a shortcut does not work

  Whenever I try to run a program as a different user to as Administrator via a shortcut, nothing happens.
  I read on the forum this topic even in Windows Vista, but running the SFC/SCANNOW command. not did the trick.
  I enjoy Windows 7 Professional on a computer laptop Dell x 32.

  Hi all

  I struggled to find a solution to this problem on my Windows 7 x 64 Enterprise, but then meet Peter prompted me to try 3 different freeware software: ContextEdit, ShellExView and ShellMenuView.

  Unfortunately, none of these tools has helped in my case.
  But I suspect a software backup program "Memeo backup" (which came with Seagate USB drive) and found the context menu Manager in the registry, it has exported for backup and removed the key.

  This solved my problem of: impossible to launch a program with run as different user (or administrator).

  I hope that this article entitled someone out there saving 4 hours of his time. :)

• Cannot run command line error during program installation

  One of the suppliers with which our company works sent us a new program to securely transmit data between our computers and their server. I installed it on all of our computers but. I have run the install and I get a box that appears and says:

  . / files. Ink

  Cannot run commandline

  It is a professional Windows 7 system with all updates. Other computers I installed on are a mix of Win 7 Home & Professional and 2 systems to win 10.

  When I look at the installation on other computers, it is a simple installation of Installshield.

  I ran several programs to check the virus or maleware and he comes clean. I have run chkdsk /f and sfc/scannow. I run cleaning programs and defragmented the disk.

  It doesn't matter if I run it in compatibility mode different or as an administrator. Result in the box to appear.

  I can't pass this system to earn 10 again because of other programs that need to run on it.

  I could use you help figure this.

  Thank you

  I solved my problem. It seems at one point that the user has installed a program called UltimateZip not realizing that Windows would decompress the files for it. Later, she deleted the program and he had left his associations in the registry. I ran some programs uninstaller to make sure that none of the programs files have been left and then here:

  http://www.SevenForums.com/tutorials/19449-default-file-type-associations-restore.html and downloaded the

  files needed to restore the association for exe, zip, and lnk files. I followed the instructions on the site and merge the registry entries. I restarted the computer and was able to install the program. In fact, it is a simple process. Thanks to sevenforums for having this help there. I hope this helps someone else.

• Error-cannot run the file: iexplore.exe. ShellExecuteEx failed; code 2.

  Hello, my pc is very slow, and then restored the system.
  And I had to delete the game 'perfect world '. I had Setup, install and went again. Except that this error when you have completed installation:

  Cannot run the file: iexplore.exe
  ShellExecuteEx failed; code 2.
  The system cannot find the specified file.

  I tried "Run as Administrator" and also play with the "Simple Start" and continued with the error.

  Or find me in my computer the "iexplorer.exe".

  A friend told me that there is an error in the "System32" folder But I haven't changed it.

  What is this error? Can I format the computer?

  PS: I do not speak or write English very well. Sorry for mistakes in the text.

  Click Start, type: enable or disable windows features

  Press enter

  Uncheck Internet Explorer

  Click OK

  Restart if prompted.

  Click Start, type: enable or disable windows features

  Press enter

  Uncheck Internet Explorer

  Click OK

  Restart if prompted.

  Check to see if you can launch Internet Explorer

  If the problem persists:

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

• Cannot run the file: code 740, the requested operation requires a rise. While trying to launch Call of duty

  Cannot run the file: D:\Call-Of-Duty-Black-op2-II/redist/vcredist_*86.exe CreateProcess failed; code 740. The requested operation requires a rise. It is a game is call of duty black ops 2
  Please help me if you can, I want to play this game, please help me, are any developer here?
  Original title: cannot run the file: D:\Call-Of-Duty-Black-op2-II CreateProcess failed; code 740. The requested operation requires a rise. It is a game is Tanya call black ops 2

  Hello

  Welcome to the Microsoft community. I've surely you will help find a solution on the issue of game Call of duty .

  1 have you connected as administrator to start the game?

  2. were you able to install the game successfully?

  3. What is the brand and model of the computer?

  4. have you already compare the minimum requirements for the game runs correctly on the computer?

  Method 1:

  What are the minimum requirements for the call of duty to work. Compare specifications with your computer.

  Operating system:          Windows Vista (Service Pack 2) or Windows 7

  CPU:      Intel Core 2 Duo E8200 2.66 GHz or AMD Phenom X 3 8750 2.4 GHz

  Memory: 2 GB for 32-bit operating system or 4 GB for the 64-bit operating system

  Hard disk space: 16 GB

  Graphics hardware:        NVIDIA GeForce 8800GT 512 MB or ATI Radeon HD 3870 512 MB

  Method 2:

  I suggest to refer to this article and run the game in check with the question administrator mode.

  How to apply once with a full administrator access token?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-run-an-application-once-with-a-full-administrator-access-token

  Hope this information helps. Please reply back with the State so that we can help you.