Cannot run my installation of Win Xp Pro Cd

Similar Questions

• Qosmio F20-141 - cannot start the installation of Win XP PRO SP2.

  Failed to start installation of Win XP PRO SP2.

  After click on "Start of the CD" I can see for a short time only from message ~ "Install from XP Wisdows" (small white letters at the top of the black screen)

  After this computer hungs in black screen.

  QOSMIO F20-141 for the Federation of Russia
  M/N: PQF20E-02801YRU

  Hello

  Have you used the Toshiba Recovery CD or did you install the operating system from the original CD of Win XP?
  As far as I know the recovery procedure is very easy to use and it should work without any problems.

  Good bye

• During the installation of Win - xp pro vmware error 10 as mentioned below

  During the installation of Win - xp pro in 10 vmware, it is showing "OPERATING SYSTEM IS NOT FOUND" how to solve. I scoured the file .iso record and properly connected to all readers. Help me solve this problem.

  I think you'd have better luck if you go to the website of VMware support.

  http://www.VMware.com/support.html

• Update Windows not finding updates/East remained after fresh installation of win 7 pro on the laptop of dell d610 32bits.

  Hello

  I have recently re - installed win 7 pro on a 32-bit computer laptop dell d610 and after installing some updates it now just says: "check for updates...". "on the windows update screen and the green light just continues to go everywhere for centuries if I leave.

  I have also no wireless connection just a wireframe.

  I've added a certain drivers from the dell website including an update of the BIOS.

  When Windows 7 was installed it has 4 drivers problems / missing in the Device Manager and since the update of dell, there are now 2 problems with

  Mobile Intel (r) 915GM/GMS, 910GML Express Chipset Family and the controller of the network if I thought I had added the driver for this.

  I tried to use them, but they make no difference:

  WindowsUpdateAgent-7, 6 - x 86 (I also tried to install an equivalent standalone update for it and he says just looking for updates on this computer and also keeps going and going)

  WindowsUpdateDiagnostic

  MicrosoftEasyFix50202

  MicrosoftEasyFix20179.mini

  tweaking .com - reset the registry permissions

  Its a genuine product key as it turned on and I think that sp1 is built in otherwise it wouldn't activate.

  I tried to solve this for a week now without success any help would be really appreciated.

  Thank you very much

  Craig

  Windows Update problem (new)

  The following procedure applies in the case of installation (reinstall) Windows 7.  It does not apply to a usual, normal day.

  I'm afraid that you will do the reinstall again.  Not a terrible penalty to pay.  Usually takes less than an hour.  Then immediately proceed to the next procedure.   It's strange, but it really does work and many people have proved it.

  NEVER install anything other than Windows updates until your system is up-to-date.  Once you have the list update, install all together.  Installation of updates in batches is not expedite the process or do better.

  1. Before you begin to re - install, download (32 or 64 bit) KB3083710 and KB3102810 in advance and store on a USB
  2. Start and end the re - install Windows 7 SP1
  3. Before that the newly installed system can go online for the first time, Disconnect the computer from the Internet.  This chronology is essential.
  4. Install KB3083710 and reboot manually.
  5. Install KB3102810 and reboot manually.
  6. Restore the Internet connection, and run Windows Update as usual.
  7. After a few minutes, you should have a lot of updates to download and install.

  Thanks to Ken Morely

• Cannot run the installation of the mavericks

  I am trying to upgrade an old iMac running OS X 10.5. ?. I installed snow leopard and ran the update is now at 10.6.8. I had a copy of the Mavericks install on another system then I copied as the old iMac. When I run it, I get the following:

  "This copy of the Mavericks install OS X cannot be verified. "It may have been corrupted or altered during the download.

  I know that this facility has run on the machine, that I copied it from. I also tried to run an installation of El Capitan of a file and got the same message.

  I did go to the app store and try to download the upgrade from there, but it gave me another error I'll put in a separate post.

  I would be very happy to help

  Thank you

  John

  Install both applications belong to your Apple ID or another Apple ID? If the latter, then you must use a copy of your Apple ID. You will not be able to download the Mavericks but you can download El Capitan. However, if the computer does not meet the system requirements then you may not able to upgrade past that Snow Leopard or you may only be able to upgrade to Lion.

  If you have already purchased the Mavericks in with your Apple ID then you should be able to re - download it from your shopping list in the App Store. You also need to associate the computer with your Apple ID through preferences to iCloud.

• Cannot run the installation of the software for Photosmart C4580 with 8.1 (64)

  I deleted all the software my computer HP running Windows 8.1 (64-bit) and tried to reinstall the drivers and clean software for both my Photosmart C4580 and for my Scanjet G4010, but when the installation starts after downloading, I get an error for each device dialog box "the system cannot find the file (or reader) specified. The dialog box header is "Users/Philip/AppData/Local/Temp/7zS7D57/installation/hpzpnp"... »

  I can't get past this error message no matter how, I try to download and install. The printer still prints from another laptop in the network it is connected via the network, while the scanner is connected by USB.

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  8. After completing the two printers installattions rename the old file name extension to Dat and restart your PC.

  Kind regards
  Shlomi

• Installation of Win 7 pro on win 7 ultimate

  OK, the first facts:

  My friend has a computer that came with Vista installed.

  Some time before, she had a problem with the computer and brought it to a repairman.

  When she got the computer back everything was in order, but the repairman installed a copy of Win 7 Ultimate instead of Vista.

  Everything went well for a while, but yesterday after an update, Windows 7 has been declared as not authentic.

  She immediately called the guy who told him that it is not surprising that it had installed a pirated copy.

  She now wants to buy a legitimate release of Win 7.

  Now for the questions:

  She does not have the ultimate version of Win 7, Win 7 Pro would be better suited for her. Is it possible to downgrade Win 7 Ultimate to Windows 7 Pro without losing all data on the hard drive?

  In addition, she still the Vista COA at hand. Then it would be possible to just switch to Win 7 Pro without having to reinstall Vista first?

  Hello

  Thank you for contacting Microsoft Community.
  Unfortunately, it is not possible to downgrade directly from Windows 7 Ultimate Windows 7 Professional, without modifying the files. You can not downgrade any Windows like the upgrade. THUS, back up all personal files and other files, and then perform a new installation (will erase the partition and install Windows 7 professional fees). You can then restore the files. Note that installed applications/programs should not be backed up because they can be installed after the installation of Windows.
  This process requires no installation of Windows Vista. But if you plan to upgrade, rather than clean install of Windows 7 Professional, you must install Windows Vista (new installation) first and then proceed to the upgrade.
  Note this upgrade can be made between architectures, i.e., x 86 (32 bit) x 64 (64-bit) or vice versa, even if it's Windows Vista to Windows 7.

• HP Pavilion 15 laptop: Cannot run an installation because of an administrator file

  I am trying to install a wireless usb adapter, but when I run the installation file, even from my account as an administrator, I get a message saying that the file operation was stopped by an administrator.

  What else is an administrator on a notebook that I use?

  Derrick1 wrote:
  

  Just being on line and compatibility goes up to Windows 10

  Yes, doesn't look like it is compatible with Windows 10.  You can wait and see if they release drivers for it in the future.

• cannot record audio streams in Win 8 pRO

  I can't save the audio streaming to Win 8 using any software... Sound forge (updated driver) Audacity (just installed as test) and your 'recorder '... They will all be the record of a microphone but not reading.  The file should be saved to HD and then it can be played using the media player... Also I can't use the built-in DVD/CD device, he continually tells me to insert a disk... My external HP dvd1040 works very well, but this is not the point...  These two problems may be related? ... In the Device Manager it tells me the CD/DVD unit is not plugged in and there is several HDMI and S/PDIF devices that show not plugged... From time to time, it (they) change... Sometimes, the Device Manager shows four items sometimes ten to twelve, more unplugged... Leave a clean install, not an upgrade, Vista (update, at the time), I have Win 8 Pro...

  Maybe your outdated software and is not compatible with Windows 8? Try this audio streaming recorder

  It works like a charm with Windows 8 and 10.

• Error 0 x STOP 00000050. Then load needed DLLs for HAL. Cannot run the installation program for the repair of installation CD.

  Are automatic updates, run every day. McAfee and SPyware Doctor, has problems with scans of Intelligaurd causing the reboot. Then the PC crashed.

  KM45,
  Here are some articles that cover some causes of the error code that you are experiencing.  If none of these match your situation, you can search Microsoft Product Support for this error code, because there are several other articles related to this code.  What happens when you try to start with the installation CD?  You get an error?

  Article 1
  Article 2

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Installation of Win 7 Pro 64-bit on Mac Pro (Intel) with Boot Camp

  Trying to install OEM Windows 7 Pro 64 bit on a Mac Pro (Intel based computer) using Boot Camp (with Apple OS X 10.6). The installation went well until the system reboots to the CD with the OEM Windows 7 drive in the Bay. At that time there a MS-DOS appears on the screen that looks like this:

  1.

  2.
  Select the Startup Type of the CD-ROM:

  There is a blinking cursor (line underscore) after the semicolon, but everything I type on the keyboard appears on the screen when the cursor blinks. I use a USB keyboard connected to the computer for the installation, so I know it works. This blocked me.

  Is it possible that the OEM version is causing this problem? Can I use a regular full version of Windows 7? Do not spend money to buy, then discover it displays the same screen.

  I'll check with both Apple Support, but it seems strange that everything went very well with the installation until the Windows 7 loaded into the Bay. Any suggestions are appreciated.

  Are you sure you are using the right drive?

  The OEM versions include a disc OPK and the Windows 7 installation disc, make sure you use the right one.

  Also, insert the disc, press C on your keyboard and select the Windows 7 disc to boot from it.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Cannot run the installation program CreativeCloud

  I installed before CreativeCloud, but after that I while I wanted to uninstall it cause I didn't use it. But I had a few problems uninstall so I restarded my computer and run CreativeCloud uninstall, then I uninstalled the program. Now I want to install it again but when I downloaded the installer of CreativeCloud I can't run the program, I do not see an error so I don't have any information about this, please help.

  By the way im using Windows 7 Ultimate 64 bit if there is more information needed on my computer just say.

  And this could be confusing read.

  Use a browser that allows cookies and pop-up windows, please contact adobe for hourly pst support by clicking here and, when it is available, click "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• Installation of WIn XP Pro Satellite P30-130

  Hello
  I need to install windows XP Professional on a P30-130 Saltellite. Is this possible?
  There is full compatibility?

  Thank you
  Daniele

  Hello

  As far as I know your device comes with Windows XP Home Edition, but you can install professional at any time. All the drivers, tools and utilities that you have on the CD-ROM of the tools can also be used with professional.

  As Tom says check the installations instructions and install all of the components in the order. It is very important.

  Good bye

• Compaq SR5710F: installation of Win XP pro on Compaq SR5710F

  I have a disabled friend who asked me to help her with a computer, it got from goodwill.  It came with Windows Vista (ugh!) and with a nasty virus called Artemis.   It is used to using Windows XP in the computer room community here, so he wants to put XP on this computer.  I tried to find drivers for the computer and have found that HP (Compaq) does not support XP, even though it is listed as part of the minimum requirements.

  Anyone know where I can find drivers for XP for Compaq SR5710F?  I also understand that I have to change the BIOS SATA to IDE?  Who will work with him always connected to a SATA drive provided in there?  I read a post in the forum that someone named Paul Tikkanen seemed to be very useful.  Mr. Tikkanen, if so, please help me as well. : )

  Randall

  Hi, Randall:

  This PC must be able to run XP fine.

  You should not need to change the BIOS settings to install it.

  After you get XP to install, here are the drivers you need...

  First install the chipset driver and reboot.

  http://www.nvidia.com/download/driverResults.aspx/9701/en-us

  Then, install the graphics driver and restart.

  http://www.nvidia.com/download/driverResults.aspx/57493/en-us

  Audio: Accept the agreement, download and install the driver of the first on the list displayed in green.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  See if the modem Vista driver works...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=PV-66234-1&cc=us&DLC=en&LC=en&OS=2093&product=3867469&sw_lang=

  That should do it.

• Qwest QuickCare/IE problem, cannot run the installation program.

  When I try to download setup Qwest QuickCare the following text is displayed: "not found required IE version.  Need to IE 5.5 SP2 and above to install it. "But I have version 9.  Why I have a problem using Qwest QuickCare? I ran Windows IE fix - it, and he says that he has no problem with my version of Internet Explorer.

  There are no problems with your IE 9; Is the inclusive who wrote Qwest QuickCare 2.7 seem to have committed two errors.  First of all, their test for the version of IE cannot say that 9 is more than 5.5 (it may have been written when no one "expected" a new version).  Second, they chose the order (1) uninstall any previous version of QuickCare which was installed successfully at the time where IE was 6 or 7, AND ONLY THEN (2) check the version of IE installed.  Reverse order would at least leave the previous 2.5 QuickCare or intact.

  Who answers your question "is something wrong with my IE.  Unfortunately, it leaves unanswered the question "how to get installed Quickcare.