Cannot save - prelude CC 2014.2 - 3.2.0 (22)

Similar Questions

• Cannot save - prelude CC

  I just upgraded to CC prelude, and after a lot of changes in a project, I thought that I taped.  When I got home, the new sub-elements were not there.  Then I noticed he didn't file-> save, and when I've updated a project Ctrl-S did nothing no more.  So I tried a save as a new project, and who did not save my changes either.

  That is what it is?

  I did an update to the latest version of prelude CC, same problem.  I uninstalled and reinstalled, same problem. First Pro seems to be OK.

  Help, please!

  Thank you

  Post edited by: Jeff Engle

  Thanks for the update, Jeff.

  You can try putting your AVI file (one that does not allow us to save metadata to it) in the Adobe Media Encoder and transcode to a different file (can still be AVI or any other format you want). Then the new file should be able to hold metadata.

  Thank you

  Michael

• Illustrator cc 2014 cannot save files

  Hello!

  I have a lot of problems with the CC 2014 Illustrator. And it me freaks out. I have no idea how to join Adobe. I tried another forum of Adobe but you have not heard anything... I would appreciate some kind of help. Or if someone knows where to ask the question?

  (1) first cannot save files... I wish that this could be the number one feature in a design application but apparently not...

  I got "unknown error" and all this work had disappeared forever. This happens often.

  (2) that the problems of delays. When move graphic and zoom in illustrator. It's SO stressful.

  I have two computers with the same problems.

  IMac 27 "mid-2011

  Processor 3.4 ghz intel core i7

  16 GB 1333 Mhz DDR3

  AMD HD 6970 M 1024 MB Redeon

  OSX lion X 10.7.5

  IMac 27 "retina 5 k end of 2014

  3.5 ghz intel core i5

  32 GB 1600 mhz DDr3

  AMD Radeon R9

  Yosemite 10.10.1 OsX

  Nils Petter,

  If no more luminous suggestion starts, you can try the list, see below.

  Have you fully installed on both computers (after upgrading the operating system if necessary)?

  The following is a general list of things, try when the question is not in a specific file, and when it is not caused by problems with opening a file from external media. You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically preferences might be corrupt); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

  https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  (6) (check the box to delete the preferences), run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) to uninstall and reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• Cannot save preferences/workspaces etc., in CC2014, the PS said the file is locked. It is not.

  The actual error messages I get are:

  "Cannot save preferences because the file is locked, you don't have the necessary access permissions or another program is using the file. Use the "Get Info" command in the Finder to make sure that the file is unlocked and you are allowed to access the file. "If the problem persists, save the document to another file or duplicate in the Finder.

  It's the same thing when I moved to CS6 CC, no one here knew the answer, but the Photoshop online help guy told me to move the two files on my desktop, this corrects the problem, but I cannot find these files in CC2014 they were: The Adobe Photoshop CC settings folder and file: com.adobe.Photoshop.plist (I think they are still on my desktop but it's also a lot of other things)

  Did anyone here know how to solve this problem or where to find these files? I know how to get to the hidden stuff, but can not see them. I love the look of the new features and can't wait to try them, but wile, I can't save my settings that I hafta stay with the 'old' CC.

  PS: I get this message when I left Photoshop and also when I try to synchronize or save the settings, thanks in advance guys.

  Excuse me, I found the recalcitrant files & moving them to my office actually avoided the new day. In case someone else has a similar problem the files in question are located in: / users/yourname/Library/Preferences / (you must hold down the option/alt key to see the library folder), and they have the file "Adobe Photoshop CC 2014 Settings" & file "com.adobe.Photoshop.plist"

  Now I get try out these new features!

• Prelude CC 2014 Ingest - treatment takes forever

  As a prelude CC 2014 when I go to ingest it says 'treatment' on each clip as usual. Unlike the previous version, however, it takes forever for the media at the end of this treatment, or not at all. The media in question are Canon DSLR images and images Canon VIXIA (mp4), ingested and transcoded from an external hard drive (WD My Passport Ultra). I reinstalled the previous version of the Prelude (2.0) and everything works normally. Is there a setting in prelude CC 2014 that could combat this problem?

  HI -.

  Thanks for your confirmation! You're so kind and meticulous.

  There is a known issue on this setting. I.e. If activate "save media beside the original Cache files when possible", for some types of media formats the miniature display in the dialog box Ingest begins to blink.

  I was in the wrong direction at the beginning because I focused on "no clip made" in the thumbnail view of the Ingest dialog box. In any case the root cause was found, thank you again for your help.

  Best,

  Lin

• Cannot save edited image. Error message: "the file is already in use or left open.

  I tried to save JPEG images after making a few changes to Photoshop CS4. For each file, I get the message "cannot save (file name) because the file is already in use or left open." I checked my apps and nothing is running would be to use the image. Can someone look over my EtreCheck and tell me if there is something current funny? I'm working on hundreds of images, so just change the name is slow and heavy work around. The problem seems to have started after update 10.11.

  Thank you!

  Description of the problem:

  Photoshop will not save modified files

  EtreCheck version: 2.1.8 (121)

  Report generated on May 30, 2016 to 19:09:40 PDT

  Download EtreCheck from http://etresoft.com/etrecheck

  Click on the links [click for support] to help with non-Apple products.

  Click on the links [click for more details] for more information on this line.

  Material Information: ℹ️

  iMac (27 inch, mid 2011) (data sheet)

  iMac - model: iMac12, 2

  1 3.4 GHz Intel Core i7 CPU: 4 strands

  12 GB of RAM expandable

  BANK 0/DIMM0

  OK 2 GB DDR3 1333 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1333 MHz

  0/DIMM1 BANK

  OK 4 GB DDR3 1333 MHz

  BANK 1/DIMM1

  OK 4 GB DDR3 1333 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Video information: ℹ️

  AMD Radeon HD 6970M - VRAM: 1024 MB

  iMac, 1920 x 1080

  System software: ℹ️

  OS X 10.11.5 (15F34) - time since started: 3 days 10:0:4

  Disc information: ℹ️

  Hitachi HDS722020ALA330 disk0: (2 TB)

  EFI (disk0s1) < not mounted >: 210 MB

  Macintosh HD (disk0s2) /: 2,00 (1.46 free) tuberculosis

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  OPTIARC DVD RW AD - 5680H

  USB information: ℹ️

  Logitech USB receiver

  Computer, Inc. Apple IR receiver.

  Card reader Apple

  Apple Inc. FaceTime HD camera (built-in)

  Seiko Instruments Inc. SII Smart Label Printer 450

  EPSON EPSON scanner

  Nikon LS-5000 ED

  Seagate FreeAgent 1 TB FW

  EFI (disk1s1) < not mounted >: 210 MB

  back to the top by car (disk1s2) / Volumes/backup drive: 999,86 (Go 280,90 free)

  EFI (disk1s1) < not mounted >: 210 MB

  back to the top by car (disk1s2) / Volumes/backup drive: 999,86 (Go 280,90 free)

  Western Digital my book 1140 3 TB

  disk2s1 (disk2s1) < not mounted >: 210 MB

  Corning (disk2s2) / Volumes/Corning: 3,00 TB (790,67 GB free)

  Apple Inc. BRCM2046 hub.

  Apple Inc. Bluetooth USB host controller.

  disk2s1 (disk2s1) < not mounted >: 210 MB

  Corning (disk2s2) / Volumes/Corning: 3,00 TB (790,67 GB free)

  disk2s1 (disk2s1) < not mounted >: 210 MB

  Corning (disk2s2) / Volumes/Corning: 3,00 TB (790,67 GB free)

  Lightning information: ℹ️

  Apple Inc. Thunderbolt_bus.

  Guardian: ℹ️

  Any where

  Kernel Extensions: ℹ️

  / Applications/Toast 8 Titanium/Toast Titanium.app

  [no charge] com.roxio.BluRaySupport (1.1.3) [click for support]

  [no charge] com.roxio.TDIXController (1.6) [click for support]

  / Library/Application Support/Avast/components/fileshield/not signed

  [loading] com.avast.AvastFileShield (3.0.0 - 10.10 SDK) [click for support]

  / Library/Application Support/Avast/components/proxy/not signed

  [loading] com.avast.PacketForwarder (2.1 - 10.10 SDK) [click for support]

  / Library/Extensions

  [no charge] com.LogMeIn.hamachi (1.0) [click for support]

  / System/Library/Extensions

  [loading] com.logmein.driver.LogMeInSoundDriver (1.0.3 - 10.5 SDK) [click for support]

  [no charge] com.seagate.driver.PowSecDriverCore (5.1.1) [click to support]

  com.siibusinessproducts.driver.SLP [no charge] (1.1) [click for support]

  / System/Library/Extensions/Seagate storage Driver.kext/Contents/PlugIns

  [no charge] com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) [click to support]

  [no charge] com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) [click to support]

  [no charge] com.seagate.driver.SeagateDriveIcons (5.1.1) [click to support]

  Demons of launch system problem: ℹ️

  [failure] com.apple.logd.plist [click for more information]

  [loading] org.postfix.newaliases.plist [click to support]

  Launch officers: ℹ️

  [no charge] com.adobe.CS4ServiceManager.plist [click to support]

  [no charge] com.avast.secureline.update - agent.plist [click to support]

  [no charge] com.avast.secureline.userinit.plist [click to support]

  [no charge] com.avast.update - agent.plist [click to support]

  [no charge] com.avast.userinit.plist [click to support]

  [operation] com.carbonite.launchd.status.plist [click to support]

  [loading] com.fujitsu.pfu.ScanSnap.AOUMonitor.plist [click to support]

  Launch of the demons: ℹ️

  [failure] com.adobe.fpsaud.plist [click to support]

  [loading] com.avast.init.plist [click to support]

  [loading] com.avast.secureline.init.plist [click to support]

  [loading] com.avast.secureline.uninstall.plist [click to support]

  [loading] com.avast.secureline.update.plist [click to support]

  [loading] com.avast.uninstall.plist [click to support]

  [loading] com.avast.update.plist [click to support]

  [operation] com.carbonite.launchd.daemon.plist [click to support]

  [operation] com.carbonite.launchd.monitor.plist [click to support]

  [loading] com.carbonite.launchd.watcher.plist [click to support]

  Elements of user login: ℹ️

  Mail request hidden (/ Applications/Mail.app)

  iTunesHelper UNKNOWN (missing value)

  Dropbox application (/ Applications/Dropbox.app)

  Adobe Photoshop CS4 Application (/ Applications/Adobe Photoshop CS4/Adobe Photoshop CS4.app)

  Screenhero hidden UNKNOWN (missing value)

  Request for InstUtilLaunch (/Library/Printers/Brother/Utilities/InstallUtility.app/Contents/Resources/Inst UtilLaunch.app)

  Application LOGINserver (/ Library/Printers/Brother/Utilities/Server/LOGINserver.app)

  AOUMonitor Application (/ Applications/ScanSnap online Update.localized/AutoOnlineUpdater.app/Contents/MacOS/AOUMonitor.app)

  Internet Plug-ins: ℹ️

  LogitechHarmony: Version: 2.0 - SDK 10.7 [click for support]

  Web of Google Earth plugin: Version: 6.0 [click for support]

  Default browser: Version: 601 - SDK 10.11

  Flip4Mac WMV Plugin: Version: 2.4.4.2 [click for support]

  CoolirisWebKitPlugin: Version: Unknown [click for support]

  OfficeLiveBrowserPlugin: Version: 12.3.6 [click for support]

  AdobePDFViewerNPAPI: Version: 15.010.20060 - SDK 10.8 [click for support]

  FlashPlayer - 10.6: Version: 21.0.0.242 - 10.6 SDK [click for support]

  Silverlight: Version: 5.1.20513.0 - 10.6 SDK [click for support]

  QuickTime Plugin: Version: 7.7.3

  Flash Player: Version: 21.0.0.242 - 10.6 SDK [click for support]

  iPhotoPhotocast: Version: 6.0

  AdobePDFViewer: Version: 15.010.20060 - SDK 10.8 [click for support]

  JavaAppletPlugin: Version: 15.0.1 - 10.7 to check the version of the SDK

  The Safari Extensions: ℹ️

  Facebook cleaner

  Latest news

  1 - ClickWeather

  Facebook Photo Zoom

  Unplug

  Ghostery

  Dashlane

  Amazon search discount

  PriceBlink

  WOT

  AdBlock

  3rd party preference panes: ℹ️

  Flash Player [click for support]

  Flip4Mac WMV [click for support]

  TechTool Protection [click for support]

  Time Machine: ℹ️

  Skip system files: No.

  Mobile backups: OFF

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 2.00 TB disk used: 536,90 GB

  Destinations:

  Feedback Up [Local]

  Total size: 999,86 GB

  Total number of backups: 50

  An older backup: 2016-04-06 19:21:02 + 0000

  Last backup: 2016-05-31 01:28:34 + 0000

  Backup disk size: too small

  Backup size GB 999,86 < (disc 536,90 GB X 3)

  By CPU process back to the top: ℹ️

  100% CarboniteDaemon

  3% WindowServer

  Console 3%

  hidd 1%

  1% adobe Photoshop CS4

  Top of the process of memory: ℹ️

  Com.apple.WebKit.WebContent 696 MB

  541 MB softwareupdated

  Safari 503 MB

  CarboniteDaemon 399 MB

  348 MB mds_stores

  Virtual memory information: ℹ️

  1.59 GB of free RAM

  3.24 GB of RAM active

  6.54 GB RAM idle

  1.51 GB RAM cable

  GB Page-ins 212,57

  Breaks in Page 443 MB

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• Cannot save the no http bookmarks in firefox

  Cannot save the no http bookmarks in firefox

  Among the Favorites of standard Web sites registered on my IE toolbar, I have several of my own making html documents/pages. These start obviously by a non-http address.

  Include pages that contain an array of webcams on one page or a page that opens several sports venues each in their own tab, or strip of video covering windows live tabs stormchasing chase, weather radar, scanners of emergency etc etc.

  An address would take the format on the lines of
  'C:\Documents and Settings\All Documents\Football results and Tables\UK.html'

  Firefox insists on adding "http" before the C:\ (and unlike IE, it also adds the %20 for space.)

  Can someone help get FF to accept a favorite that is not a Web site.

  It's ok I just solved it me, waived the need to type %20 for each space.

  Need to add before c: the following

  file:\\\

  So a sample address

  file:\\\C:\Documents and Settings\All Documents\Football results and Tables\UK.html

• Cannot save via TemPro

  Hello!

  A cannot save my laptop via TemPro. Always say, contact a dealer or other guys!
  I don't want to make a phone call. I want a support email address!

  For this great company * is not a public e-mail address * for product registration!

  Molnár; József
  It professional, system administrator

  of the Hungary

  > For this large company doesn't have an e-mail address public for the registration of the product!
  Check please the other laptop manufacturers and you will see that none of them have registration by mail.

  Toshiba and other companies have online registration.
  Online registration is under http://eu.computers.toshiba-europe.com/innovation/generic/services_warranty_reg_map_eu/ of Toshiba
  So be cool and the register of your laptop there.

• upgraded to 3.6, bookmarks, lost, lost the toolbar bookmarks, bookmarks library, lost cannot go to the previous backup, error message. Not have Torbutton. Cannot save new bookmarks. AutoFill remembers. Don't forget the story is about.

  upgraded to 3.6, bookmarks, lost, lost the toolbar bookmarks, bookmarks library, lost cannot go to the previous backup, error message. Not have Torbutton. Cannot save new bookmarks. AutoFill remembers. Don't forget the story is about.

  I got this yesterday after the 3.6.4 problem upgrade. I'm not sure if I saw all the things you did, but I have def lost all bookmarks and the back button. I fixed it by:
  1. go to the Firefox profile directory, which for me is here but 1st bit will be different for you as mine work specific:

  C:\Documents and Settings\U049177\Application Data\Mozilla\Firefox\Profiles\soez0lvk.default
  2 delete places.sqlite and places.sqlite - journal

  3. start Firefox (you should have the back button now works but not Favorites, he recreated to these 2 files)

  4. in the menu, bookmarks and then organize bookmarks, then button import and backup, then restore, then select a day to restore from. You should now have your backups Firefoxes bookmarks.

  Hope this works for you

• HPDM 4.6 SP4 cannot save the files deploy subtask

  Recently, when you create a new task to deploy a file and try saving it I get:

  "Cannot save the subtask to deploy files.

  If I create another type of task it saves without problem. The only time where there is a problem, is if I am trying to add files to my task. If I try to add a file to an existing template, I get the unable to merge the error of the model.

  I have checked the permissions in the main repository, run the test, all come back fine. I even tried manually adding files to the repository and that's ok too. I can't find something as interesting in the newspaper. I should mention that we did a database migration recently, but I test all features and managed to save a task of deployment without problem.

  Try to get out of the individual tasks that contains files (in this case the msi Hotkey filter) I get the following:

  2015-07-03 14:08:21 [error code: 5260288] [Module: MasterController] [category: input/output disc] 2015-07-03 14:08:21 [error details]:.\SyncTask.cpp@91: failed to sync files. .\port_layer\ftpclient\fileclient.cpp@816: failed to get the data from the file. .\port_layer\file_io\filefuncs.cpp@86: failed to get the data from the file : D:\HPDM/Repository/Files/ToDeploy\Hotkey filtre.\port_layer\file_io\filefuncs.cpp@84: the system cannot find the specified file.

  In the masterrepository log:

  2015-07-03 15:14:28 ERROR could not remove the package: Test. \port_layer\ftpclient\fileclient.cpp@235: has no file stat, RemoteDir: / files/repository/ToDeploy, name: Test.
  .\port_layer\ftpclient\fileclient.cpp@390: could not get the file stat, RemoteFile:\\10.7.1.29\HPDM$/Repository/Files/ToDeploy.
  .\port_layer\ftpclient\ShareFolderClient.cpp@424: has no file stat data.
  .\port_layer\file_io\filefuncs.cpp@86: failed to get the data from the file : \\10.7.1.29\HPDM$/Repository/Files/ToDeploy\Test
  .\port_layer\file_io\filefuncs.cpp@84: the system cannot find the specified file.

  2015-07-06 09:11:44 CTaskReceiverThread::recvTask() of ERROR: unable to receive data from ssl server.
  2015-07-06 09:11:44 CTaskReceiverThread::recvTask ERROR failed. Returns the value-1.
  2015-07-06 09:12:10 sendReoprt() of ERROR: unable to send data to the server.
  2015-07-06 09:12:10 CReportSenderThread ERROR::recvTask(): could not receive data from ssl server.
  2015-07-06 09:12:10 ERROR CReportSenderThread::recvTask failed. return value = - 1

  10.7.1.29 refers to a repository of the child, I have about 30 repositories of the child.

  I have not changed any configuration, I don't really understand how this happened, I can't even create my first Contact rules, scheduled tasks or create new tasks/templates. We are in the midst of a large-scale deployment so that any help ASAP that would be most appreciated!

  Thank you

  Luke

  This has been resolved with the help of Chen_HPDM by e-mail.

  We changed the console.conf to:

  HPDM. NEWSPAPER. LEVEL = DEBUG

  (console.conf can be found in C:\ProgramData\Hewlett-Packard\HP device Manager\Console\conf)

  I ran the task to deploy the files again and had the following in the log:

  2015 07-09 09:43:41 [WT-EventQueue-0] DEBUG Console - Request (20201): add templates

  2015-07-09 09:43:42 [WT-EventQueue-0] DEBUG Console - [TimeSpan] (20201): Add models [true]: 86

  2015-07-09 09:43:42 [WT-EventQueue-0] TemplateManager DEBUG - processAddTemplate: OS = HPWE8_64, name = New Test, category = files and the registry, status = transfer and tip =

  2015 07-09 09:43:42 [WT-EventQueue-0] DEBUG Console - Request (20202): update of model

  2015-07-09 09:43:42 [WT-EventQueue-0] DEBUG Console - [TimeSpan] (20202): update model [true]: 142

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files\ToDeploy\_Temp

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files\ToDeploy

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files\ToDeploy\_Temp

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files\ToDeploy

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository\Files

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp\Repository

  2015-07-09 09:43:42 [WT-EventQueue-0] INFO FileOpt - cannot delete file: C:\ProgramData\Application Data\HPDM_Temp

  2015-07-09 09:43:45 [Thread-43] DEBUG MPFactory - Call TemplateMP.

  2015-07-09 09:43:45 [Thread-49] DEBUG TemplateManager - processAddTemplate: OS = HPWE8_64, name = New Test, category = files and the registry, status = transfer and tip =

  2015-07-09 09:43:45 [Thread-49] TemplateManager DEBUG - processUpdateTemplate OS = HPWE8_64, name = New Test, category = files and the registry, status = failure, tip =

  The Console could not delete a temporary file created previously called HPDM_Temp. I renamed the file and was able to create the task.

  I can't wait to find my question on the forums, and someone didn't post the solution so I hope this helps and thanks again Chen!

  Luke

• HP Deskjet F4235 cannot save scan of document in word or pdf

  Win 7 32 bit - HP Deskjet F4235 - cannot save a scanned document asJpeg, etc. Don't know how to change the settings to save a scanned to a PDF or a Word document. This option is not currently available.

  Hello

  Please try to install the package on the Windows 7 computer:

  http://ftp.HP.com/pub/softlib/software11/COL30102/al-74858-1/DJ_AIO_03_F4200_NonNet_Full_Win_WW_130_140.exe

  Kind regards.

• How to do this: Photoviewer, Windows cannot save changes to the image due to a problem with the properties of the file!

  Hi, I'm trying to post a photo, but whenever I have try rotation to the right, it says something like: can't save changes to the image due to a problem with the properties of the file. My laptop is MS, but the photos were taken on the Iphone. How to do this?

  I don't know if the following links answer your question, but
  they may be worth a visit:

  Good luck and * proceed at your own risk *.

  FWIW... There is a very long discussion (several pages) to the
  following link:

  Cannot change the imported iPhone 4S photo
  https://discussions.Apple.com/thread/3444951?start=0&TSTART=0

  More Discussion

  iPhone 4S image properties is not compartible with Windows?
  Editing can be done on the computer due to the error
  "Windows Photo Viewer cannot save changes to this picture.
  because there is a problem with the properties of the image file".
  Any help?
  https://discussions.Apple.com/message/17291884#17291884

  More Discussion:

  We cannot turn a few photos in Windows 7 (but can turn others)
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cant-rotate-some-photos-in-Windows-7-but-can/3a809845-9144-4BB1-9bb3-ab4f5b856524

  A simple solution is to open the photos in paint or most other
  digital image editor and modify it.

  Some people have reported success using the following free download
  to remove the metadata.

  Property restrictions stripper iphone 4S (JPEG & PNG Stripper)
  http://www.SteelBytes.com/?mid=30&cmd=download&PID=15

  Here's a way to turn...

  Easily turn locked iPhone 4 and 4 s Photos in Windows 7 with
  the rotator Lossless JPEG free
  http://www.daleisphere.com/easily-rotate-locked-iPhone-4-and-4S-photos-in-Windows-7-with-the-free-JPEG-lossless-Rotator/

  Free download JPEG Lossless rotating
  http://annystudio.com/software/jpeglosslessrotator/

• users cannot save .pdf, .doc files using "Save target as" in google search results. Can someone help me, I couldn't have known that the same works very well on some computers.

  I am the Director of technical support for more than 1000 computers. Recently in some computers (windows based) users cannot save .pdf, .doc files using "Save target as" in google search results. Can someone help me, I couldn't have known that the same works very well on some computers.

  Hi MASPAdministrator,

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP forum.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• I get the message "Windows Movie maker cannot save to the specified location".

  I get the message "Windows Movie maker cannot save to the specified location".  I tried different places, to moved all the files in these locations, recreated film, enhanced virtual memory to computers at 8 GB and 47GB available disk space. Tried all options to the title of best quality, Best Fit, other settings and including the CD recording. But it still won't save as a movie to a project. I have 5 separate voice recordings, and a video with music incorporated for a total of about 24 MB. Help?

  Hi Mare Hausen,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. What is the total size of the memory (RAM) installed on the computer?

  See the below Microsoft article and try the steps mentioned, check if it helps.

  Movie Maker 2 stops responding when you try to save a large movie file

  http://support.Microsoft.com/kb/814836

• Errro: Cannot save the Terminal Server when he tried to use the program Sony Vegas

  Original title: cannot save the Terminal Server.

  I'm having a problem using my program "Sony Vegas". It worked OK. But now gives me an error. "Cannot save the Terminal Server. I don't know if this a problem of Windows, or Sony Vegas. Please tell us how to solve this problem. Thank you.

  Hi barnstable,.

  Try these steps and check the result.
  Step 1: Check if the Terminal Services service is disabled
  a. Click Start, click Run.
  b. type services.msc, and then click ok.
  c. in the list of services, double-click Terminal Server Services.
  d. change the startup type to automatic and start the service.
  e. click ok to apply the changes.
  f. check if the problem persists.

  Step 2: If the problem persists, uninstall and reinstall the program Sony Vegas
  see How to change or remove a program in Windows XP .
  b. Once you have deleted the program, restart the computer.
  c. reinstall the program.

  For additional support, get in touch with Sony support team.

  Visit our Microsoft answers feedback Forum and let us know what you think.