Satellite Pro L10 repaired but lack of battery

Hello

This is my first post on this forum. In June 2006, I had my Toshiba L10 - 100 being repaired by a service of Toshiba in Austria partner. It was just the main fan who is out. I return the package and it remains invisible, because I was busy with something else. In other words: I do not check it I'm back properly. Now, after nearly a month and a half I had to see that the battery was missing in the package.

Of course, it's my fault to examine does not correctly package when I received it. But now, I am a user of laptop with lost mobility option.

I contacted the service partner, but he refused my complaint of the customer. Well, I have no evidence that I have not received the battery.

Any ideas?

Fred.

Hi Fred

Your story is truly amazing. If you take the laptop in your hands, you can see if the missing battery. The battery of this device is not small. Sorry but in my opinion that it's your fault because it is usually returned product must be checked and if something is missing, it must be reported immediately.

Sorry, but I don't see any chance that you will get the new battery. It is not the case with your laptop, but with each product.

Good luck!

Tags: Toshiba

Similar Questions

  • Satellite Pro L10 battery did not reach full charge

    On my Satellite Pro L10 battery only reaches 85% charge if leave all night. Is this likely to be a problem with the supply power, circuits inside the computer or charge the battery?

    I need to know the best place to start to spend money!

    Some experience that may or may not apply to:
    -Battery system is around 2.5 years
    -The battery lasts about 1 to 1.5 hrs that seems fair considering his age and his level of violence (left connected permanently and not recycled periodically)
    -Very recently would not pass, with or without the power adapter connected. Solved by removing AC, then the battery, running on AC, then turn off and reinsert the battery. Everything now works on battery or AC.
    -Over problem, system has been itself decommissioned at random. Since the resolution of the problem of market it was not randomly turned off itself, YET!

    Any help or advice would be much appreciated. Thank you.

    Chris

    HM, sounds to me like a hardware problem. But the problem is to understand where exactly the error, if you have the following options:

    * Contact a service partner chartered for a hardwarecheckup and an accurate diagnosis of your machine ([http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT])
    * You can buy a new battery (since it could be the battery, I guess)
    * You can sell this machine on ebay and buy a new one :)

    Hope I could give you some new and fresh ideas. There is almost no other options or solutions, the it s so your choice.

    Greetings

  • Intermittent WiFi on Satellite Pro L10 D WAP - Link

    Equipment: new Satellite Pro L10 with Centrino & integrated Intel Pro 2200BG wifi and D-Link DWL2100Ap wireless access point. The new laptop works on the neighbor's wireless network (all day), and my Sony notebook working on our D-Link network based. However the new Toshiba works for awhile the first thing in the day (maybe 2 hours) and then stops working at an increasing rate. The afternoon he will not work for more than about one second.

    For most, however, the icon says that it is connected and free config says that it is connected; See her ranges from wireless networks - different bits of the system are in disagreement on the status of the connection, but no data flow.

    The D - link WAP has always said he has the Toshiba as a customer. Select 'repair' normally runs for a second or two.

    He always seems to have a number allocated IP, IPCONFIG - however, if I try to connect later in the day and is already having an IP address, it may not stay connected for long enough to get a.

    Very frustrating. Any help appreciated.

    Hello

    Well it s very strange.
    You said that the work of laptop on the neighbouring s wireless very well.
    In this case I n t think that it s a problem with wireless network card.
    Try to check your router settings.
    Maybe you can compare your settings with the neighbors.

    Good bye

  • Satellite Pro L10 will feed no, no LED display

    My satellite pro L10 has suddenly stoped working .There seems to be no power "." No leds work by battery or sector.
    can someone help?
    CJ

    Hello

    I recommend first of all check the power adapter and the battery functionality.
    But it s very unusual that these two parts are dead at the same time. So I think that has to be something wrong on the motherboard.
    Unfortunately, it is not easy to say what's wrong without any detailed Diagnostics.

    Therefore, you should ask the ASP to support that in the post above suggested.

  • Satellite Pro L10: How to arrange a pick up service under warranty

    Look, I don't know where to put this, but I'm at the end of my home with it.

    I know what the problem with my laptop (a Satellite Pro L10) because I've had this is the fourth time it happened.
    I just need to organise a pick up/repair warranty.

    I went through all of the fields on the this site Web site and filled in all categories and all cela and whenever I click on the button 'Submit' final at the bottom of the page where you will see your address and details of the problem, it refreshes just the page (LESS my details).

    He submits? It is a failure to present a reason any?
    I spent half an hour - that there is NO category that I failed to fill.
    What the hell with this thing?

    I have only one month left on my laptop warranty. I just want to fix one last time before I get a new one. I experienced this three times before - I know that the forest both inside and outside and I just want to get it + more + with.

    Is it just a number somewhere that I can call to have someone pick up the thing?

    Hello

    On Toshiba's European support page, you can find some useful links.
    http://EU.computers.Toshiba-Europe.com-> support & download

    You will find the link to the service provider authorized in your country and a link to your state of repair.

    If you want to repair your laptop then contact ASP in your country and organize the repair service
    All the details, you should get to you ASP.

    Good bye

  • Satellite Pro L10 - Unmountable Boot Volume

    My Satellite Pro L10 loops in the boot process. After the Windows XP splash screen, the following error messages appears:... Unmountable boot volume... Technical information: Stop: 0x000000ED...

    I know that is nothing exceptional and do a full restore would solve the problem. But I don't want to lose the data (which are of course not saved). I tried a Windows XP disk, but it does not start from the cd/dvd drive by pressing F12 or <0>and change the boot order...

    Can anyone help please?

    Hello

    Hmm, the volume not mountable startup error message appears especially if the HARD drive may not be recognized during initialization. Why? Well, maybe the HARD drive failures or the master boot record is defective!

    If you don t want to recover the laptop, you can try to boot from the XP CD (C press immediately after switching on the laptop) and to start the repair console.

    In the repair console, you can use the command chkdsk/p and after that, you could fix the disk main boot using the fixboot command or / and fixmbr.

    If this does not help, the new installation of the OS is that you as a last resort.

    PS: If you want to save the data you can try to remove the HARD drive and try to connect it via external USB HDD controller to another computer.

  • Satellite Pro L10 and Windows 7 drivers

    Hi guys,.

    I'm looking for a set of drivers for the laptop model above. I recently installed Win7, but I have no drivers for the machine at all.
    XP drivers do not work.
    If someone managed to install the drivers for this machine? I'm mainly interested in getting my wireless card working.

    I look forward to your responses.

    Thanks in advance for your responces
    Panos

    Satellite Pro L10 is old enough for laptop and I do not think that you will find all the Win7 drivers.
    According to the Toshiba - http://aps2.toshiba-tro.de/kb0/TSB9902P50000R01.htm - your laptop isn't supported Win7 and find the drivers won't be so easy.

  • Extension memory Satellite Pro L10

    Hello

    I have a satellite Pro L10, which has only 128 MB of RAM. I want to wear this but can't find any information about it in the manual.
    I would like to know,

    How much RAM, I put in the L10?
    What type of RAM the L10 take?
    It's like a stick or two?
    Where can I buy this type of RAM?

    concerning

    David U

    Hey there,

    It has no internal memory, 2 locations available, 128 or 256 MB at 1 location, PC2100 DDR - RAM 333 MHz, 1024MB max

    You can buy the RAM from all :) any store on the computer or online from Toshiba.

    See you soon

  • Satellite Pro L10 will not start the system

    Hello!

    I have a Toshiba Satellite Pro L10, which won't work for some reason any.

    The last time that I used it, it worked perfectly fine, but now all I get is a black filtered message on "windows starts do not successfully»

    It indicates that the computer is not responding and asked me to choose one of the five options - safe mode, safe mode with network, security mode command, last known configuration, prompt or start windows normally.

    There is also a 30 second countdown if I do nothing the portable samekh automatically.
    It is, none of these things work.

    Everything that happens with any option is to a thought very much time on things, then it goes to a black screen with a time/processing bar downstairs, then when that ends it turns itself off, samekh, mw windows page shows (with f2 and f4/f10? options) and the process is repeated.

    He did about 50 times now and still nothing.
    I tried the command ctrl/alt/del, I tried to turn if off and try again, I even opened the f options but I don't know enough about computers to do more.

    Help, please!

    If possible I would like to get the computer on long enough to verify what documents I have on this subject before I can back up (if necessary) and restore it to the factory settings (as I predicted), or if this is not possible, I do not think that there is a lot to lose in this respect in any case, am prepared to take it all back to factory if necessary. I have all necessary installation CD and manuals to go with.

    hope this makes sense and I gave you all you need to know.

    Thanks, B

    It seems that the laptop is not able to boot the system, but I m not quite sure if it s because of the defective system or HARD drive corruption.
    If it s just a system problem, the installation of the new Windows operating system should help you to get it resolved.

    In case the HARD disk is defective, you need to replace the HARD drive and reinstall the system.

  • Satellite Pro L10 - what sound card I have?

    Can someone tell me please what sound card has the Satellite Pro L10?
    All I know is that it is an integrated, but need to find the drivers for it, as I don't have my original master computer disc with me here in College, but to do my sound!
    Thank you
    Rob

    [Edited by: admin on 22 January 06 08:58]

    Hello

    Your device has Conexant CX20468-31 AC97 Audio Sound Card.

    Good bye

  • Satellite Pro L10: Enter key malunction

    Hello.

    On my Satellite Pro L10, the Enter key does not work. I tested it in the BIOS and it works but it does not work in Windows XP. If someone from the software fixes or advice I would be very grateful

    Hello

    It's a very strange question, but you should be more specific about this. How did you test the feature key of entry? Is there the same result if you use Notepad or the same conversation programs Office applications? Your device's pre-installed with recovery media?

    As much as I know it isn't common Windows problem and it is unclear to me that there is a patch for this problem.

  • IRQ conflict on satellite pro L10

    I had problems using a capture card to PCMCIA data with a new satellite pro L10. I used the same card on other laptops with no problems. I think the problem is to do with the conflict on the IRQ channel, because both the card and the controller cardbus use the same channel. I tried to change the IRQ channel manually with the Device Manager, but it does not accept the change. Someone has suggestions how to change the IRQ channel or anything else that might help?

    Hello

    Unfortunately I'm not familiar with this, but please check this article http://kadaitcha.cx/irq_conflicts.html maybe you will find the solution to your problem.

    Good luck!

  • Can not get my Satellite Pro L10

    I have a satellite pro l10, I tried to put my recovery disk in and she said keeping key c down when I start my computer but it does, nt work, how do I get this drive to work does anyone have an idea, s Please

    Hi James,

    Press and hold the 'C' key is a specific shortcut of Toshiba to allow the laptop to boot directly from the CD. However, you can also select the CD-ROM as boot device in the BIOS, just press the F12 key when you see the Toshiba start screen for power over the process and you will be presented with a menu of the device selection. Tab just down to the CD-ROM and press to enter. The laptop computer should now boot from the CD.

    Kind regards

  • Satellite Pro L10: where can I get a better graphics card

    Hey

    I have a Toshiba Satellite Pro L10 and I was wondering if and where can I get a better graphics card for it?

    Thank you very much

    Sorry Michael, but it has nothing to do because the graphics card can not be upgraded. Unfortunately the L10's small budget machine, and because of this, there is no better card inside.

    Good bye

  • Satellite Pro L10: Question about saving the files on a CD

    Please can someone tell me how I can save a typed document (produced in Word or similar) on the CD? I don't have a floppy drive on my satellite pro L10 portable. Have 'saved' music using the immediate recording before, but now need to record your actual work on the hard disk for transport to a pc with access to a printer.

    When I tried it told me incorrect function, contact administrator (that's me!) I tried CD - R and CD - RW discs and neither would not let me save the file on it. would be grateful for any advice regarding this.

    Thank you

    Hi Roy,

    First of all, you will ned to ensure that you have enabled logging on oprical drive you. For this a right-click on the CD-ROM in my computer icon and then selecting "properties-> recording. Make sure that "Enable CD writing on this drive" is checked.

    Once you have done the above, you can simply drag the documents that you want to copy on the CD-ROM icon in my computer.

    Note that the burning process does not happen immediately. Windows caches the files to be placed on your hard drive first and then you can burn all documents cached only once.

    Alternatively, you may find that some third-party software has been bundled with your portable computer, which performs a similar function the standard Windows CD burn software.

    Kind regards

Maybe you are looking for

  • Siri 10 iOS do not do when I ask a text to be sent on Whatsapp.

    I activated Whatsapp in menu of Siri, but when I order him to send a text message on Whatsapp, it says "sorry, you will need to continue in the application. Everyone knows about this problem? Is there something I can do? PS: I have an iPhone 6 with i

  • How to transfer or import istory of Safari browser to Chrome

    I'm having trouble with my Safari right now (more details on this saga here: Safari crashing my screen (and nothing else)) and I think that at least until I get that fixed I use Chrome for a while. However, it feels awkward to use Chrome without all

  • Using bcdedit to display information

    I have a new laptop of Compaq CQ58 (product # C2M29U ##ABA) with Windows 8.  I'm trying to use bcdedit/enum command to display the information of partition boot entries.  I'm using terminal shell (cmd.exe).  When I use the bcdedit/enum command, I get

  • Error code 0 x 643 for updating security (KB2656370)

    I could not update since April 10, 2012 - error Code 0 x 643 to update security for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2656370) My question is - do I really need Microsoft .NET Framework? I o

  • try to download the file on a cd. where the file & folder menu tasks?

    After selecting a file to download on a cd, I can not find the folder tasks & menu option. Where is this option?