Cannot see interface in mode of inspection inspection on CVS1458rt

Similar Questions

• Development of probe pair interface inline mode

  I've never set up a probe pair interface inline mode, and I had a few questions about this

  It is my understanding that traffic from a virtual local network would be passed to the other through the probe (and then you implement your strategies passed).

  But then, how would you set up the SPAN or capture ACLs on the side of switching? A session of the monitor will put a port in disabled mode (even though I think you can use the session monitor x destination penetration to allow traffic of it).

  Or you want to use the

  Capture switchport

  order with FSPAN on both interfaces?

  Any advice would be great

  Hello

  For inline-pair configuration should be something like this

  Assuming that 1/1 and 1/2 switchport. Port Gig0/0 and 0/1 Gig IPS

  1/1 and Gig0/0 must be in one vlan, say 800.

  1/2 and Gig0/1 should be another vlan, say 810.

  switchport config:

  1/1

  switchport

  switchport access vlan 800

  switchport mode access

  1/2

  switchport

  switchport access vlan 810

  switchport mode access

  All traffic vlan 800 is sent to the port in vlan 810 and vice versa after inspection.

  Kind regards

  Sawan Gupta

• After Malware that my login is disabled cannot start in safe mode

  Hi if anyone can help.

  A friend tried to watch movies online, I'm not sure of the site they visited, but were asked to install MacKeeper and I believe that they did, as I noticed it was to download and installed the following day and I asked them why they did this and they said it was the only way to watch movies!

  Anyway to cut a long story short my friend then called me to say they received a "pop" window to say that my computer has a virus and call a number of 1800... I told them to do nothing certainly not call the number and I would like to sort.

  So basically since then that then I can not connect to my main account at the start, the section where you type your password won't let me type into it and there is a symbol of the brand of 'question' next to it. If I hold my mouse over the question mark I get a dialog box stating "Please enter your password to iCloud as... as well as the date. I can only login as a guest and I cannot connect in 'safe' mode by holding down the SHIFT key.

  I deleted the MacKeeper Application (and also another OS player application that is newly installed the same day!) and empty the memory cache of my browsers and also now upgraded to 10.11.6

  I also run disk utilities, but still I'm getting this problem trying to connect to my main user account!

  I think that it is some kind of malware, does anyone have ideas how to solve at least the connection problem?

  If I could stamp out to see if there is any malware stuff going on behind the scenes it would be too great!

  All suggestions welcome.

  Thanks, Ciaran

  

  How did you uninstall the MacKeeper application? Please be as specific as possible, unless you have followed the steps, I suspect that your system has installed to uninstall. If this is the case then you will need to re-install and uninstall immediately by following the instructions of developers. Otherwise, the best thing to do is to do a wipe and installing OS X and then manually install your applications and restore your data from your Time Machine backup.

  I'm sure you probably learned to not let this 'friend' enter the 100' of your computer.

• Cannot see/Run JCarousel with FireFox

  Cannot see/run JCarousel with Firefox.

  I am able to see the main image and the images over the primary image line; but the javascript code which changes at each successive image does not work.

  I can't run any JCarousel with FireFox. National Geographic is just one example of the most recent which does not work.

  You have quite a few extensions you installed that can cause problems like that (Adblock Plus, Ghostery).

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).

  • Makes no changes on the start safe mode window.

  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  • If you have many extensions then you first activate half test extensions that half the problem.

  Continue to divide the bad half that still has the question until you find that one is causing it.

• My 8 victory... infected with the virus cannot start in safe mode...

  recently, my computer of windows 8 has a virus... (miss click an ad pop up and it's on the computer)

  I already got Malewarebytes Anti Maleware and installed AVG, but this virus that bypassed and infected my computer. I tried the standard F8 during startup to go into safe mode and run my anti virus scanners, but apparently it does not work in windows 8. Some say SHIFT F8, that does not work either. Also any other method of setting up safe menu starting boot or mode does not work as it should connect on the desktop to go threw the settings and activate it for the next boot upward. This does not work for me since the virus I have apprently made my fall display driver, after I get my user password to start the desktop computer, so I don't see anything but the pointer of the mouse, everything is black. Y at - it another way to start in safe mode or trigger a recovery system or restore without actually being on the desktop?

  Why windows might change?

  I already ordered a recovery disk as that seemed to be my only option. But the works of windows 8 way I will NEVER buy a computer with it again. Cannot start in safe mode and can't do the simplest task without being a great test. It's crazy. I thought that windows 8 was supposed to be simple and easy to use!

  Please reset your PC. The procedure is given in the link below:

  http://support.HP.com/us-en/document/c03546603

  If this does not help, recovery of the system to the factory settings. Consult the following document:

  http://support.HP.com/us-en/document/c03489643

• my vista operating system continues to run in a loop, saying: Configuring updates 3/3 0 full. Cannot start in safe mode or the other amounts to the same configuration problem

  System downloaded 2 of 3 updates. the third will not update and continues in a loop. Failed to start in SafeMode either. Don't know what to do.

  Hello

  as you cannot start in safe mode, try this

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• How to fix error with vista service pack 1 - cannot reboot in safe mode or regular

  tried to download vista sp1 - cannot start in safe mode or regular - enabled more than an hour to download - black screen-a chosen start normally - tried to start - at least 35 min. with the screen - in the suite! oxco1a001d! 28802/95712-{Registry\machine\components\DeriveData} - then tried to start in safe mode - says something was wrong - ran progran details - leaving - help, please4

  Hello

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and read this:

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Homegroup problem: computer cannot see the computer B, but B can see A

  I have two computers.  A race 7-Home Premium 64-bit computer is connected to the network via a wireless-N.  7-Home Premium 32 bit computer B is wired.  Computer has created the homegoup.  Computer B can see computer A and can send files to A computer and retrieve them.  However computer cannot see at all computer B.

  I'm sharing files on both computers.  Not sure what the problem is.

  Hi Hunt72,

  Can you ping the computer from computer B?

  Can you start computer in Mode safe mode with networking and see if she can see computer B? If it still does not work, do the same with computer B.

  Do you know how to use netmon to capture the activities of the network?  If so, download it and run it by trying to send files between computers, take note of all connections rejected or denied.

  http://blogs.technet.com/Netmon/archive/2008/09/17/Network-Monitor-3-2-has-arrived.aspx

  Let us know if it works or not,
  Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Creative cloud cannot see my plan of photography :(

  Creative clouds cannot, see, my apps Lr and Ps one year plan. The tests are and. I tray to log out, log in. Uninstall and reinstall, I used tool cleaner and nothing. Help, please. Or how can I contact Adobe in this case

  Hello

  Please, sign out and sign in your creative cloud. Please see connect and disconnect activate Cloud Creative applications

  You can also view the creative break Cloud 2015 to return to the mode of trial

  Please let us know that it helps.

  Kind regards

  Shelly

• Host cannot see Local disk for VSANs

  Hello

  We are building our first host VSANs and fell at the first hurdle. Our host config is:

  IBM x 3650 m4 7915
  ServerRaid M5110e
  1 x 200GB SSD SATA
  1 x 600 GB 10 k SAS SSD
  IBM Vmware Hypervisor USB with 5.5 u1 image installed.

  The problem is that the esx host cannot see the 2 disks that are mounted. Lists under storage controller MegaRAID SAS merger adapters (not sure where he gets the name of merger of). When I click on the controller for 2 drives do not appear under devices or paths. If I go in to the RAID controller to start upward and configure drives individually to be RAID 0 then ESX sees the two discs, but unconsciously, cannot identify the Type of the SSD drive. I think that there is a work around that, but I know that's not ideal, and according to the vSAN HCL of the Raid Controller above supports passthrough. Get the pull-out hold to work turns out to be difficult, but I hope that it is just something simple, I missed. Someone at - it an idea where I should start looking?

  Thanks in advance.

  Thanks for the tip CHogan, it worked, but after reading the disadvantages of this method in your book "Essential Virtual SAN" I persisted for the pass-through to work on the raid controller.

  After some further research it turns out that I had to physically remove the RAID 1 GB Flash cache on the motherboard. In removing what it affects the RAID controller. He calls it. mode of TMI which allows for amp JBOD.

  Thanks to all for your responses.

• Cannot see all the specifications of customizaton... why?

  We have two vCenters in bound mode. If I create a virtual computer on a site and you choose to use a specification of previous customization that I see about 1/2 of the plug. If I do the same thing to the other site I get about the other 1/2 (give or take). I built a new virtual machine in my second site, thinking that if I taped the first site would see it. Well, I don't see it at all in my technical customization Manager.

  Any ideas on that?

  HI, oops I meant to edit and say that I figured this out. Even if two vCenters are in bound mode, it seems that the models cannot see card customization of their respective vCenters. I created a similar technique on my other vCenter and was able to see it!

• cannot see the bengali fonts correctly in a Web page.

  Presenty using Windows 10 and Firefox 41.0b5. Cannot see the Bengali fonts correctly in any Web page, but the edge or the Internet Explorer can display Bengali fonts nicely.

  You can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can check if there is an update for your display driver graphic card and search for hardware acceleration of related issues.

  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

• When I install the new version of firefox browser dose being not fit on my screen. I cannot see the tabs or the ul bar and not even leave the firefox avecjoint

  When I install the new version of firefox browser dose being not fit on my screen. I cannot see the tabs or the bar ul and can leave not even firefox without using ctrl-alt-del and opening a master and have it at the end of program. Help, please.

  You may have a corrupted file xulstore.json .
  https://support.Mozilla.org/en-us/KB/changes-toolbars-and-window-sizes-are-not-saved

• Toshiba Kira - Win 8.1 cannot see all files on the 64 GB flash drive

  Hi all

  Newbie on this forum. I just bought the i5 8 GB of RAM Windows 8.1 Kira Ultrabook, a great little machine.

  I have a SanDisk 64 GB flash drive that has about 20 GB on it in a dozen files. These folders and the content can be seen by my Windows 7 PC, even my mobile phone and Tablet Tower.

  However, the Kira cannot see both files, even if in the properties of the drive, he sees the space correctly. Turned on all folders and no difference.
  My wife has a 32 GB flash - no problem.

  I reformatted the flash disk, run a virus on the disk and the Kira. The Kira can someone verify the maximum size flash can see it please? I can't find it in any documentation.

  Any help or suggestions appreciated - I ran support Toshiba without a response, so maybe someone here can help you.

  Mark
  Brisbane Australia

  The appearance of the folder is not in your laptop model or your system!

  I recommend you to check some common view windows Explorer settings:

  (1) to see the hidden files and folders reported as
  Click the view tab, and then click Show hidden files and folders.

  (2) to display all the system files that are usually hidden from view.
  Click on the view tab, and then clear the Hide protected operating system files check box.

  Here you will find all the information about the folder views and behavior
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-folder-views-and-behavior

• S75-b7218 Windows 8.1 satellite cannot see the bluetooth headset

  Satellite 8.1 Windows cannot see the Philips SHB5500 bluetooth headset.

  Driver: Intel (r) wireless Bluetooth (r)
  2014 08-12
  Version: 17.1.14342

  Help! Please, I beg you!

  Laptop certainly supports BT 4.0
  The question is: have you enabled the BT correctly in 8.1 parameters to win?

  Another question: have you tested the BT headset as part of another device?
  I mean, it is possible that the helmet is not working properly.