Cannot select the layer via CTRL + ALT

Similar Questions

• Powerplanes - cannot select the layer

  With the help of Utiboard10.0.    Council of layer 2.  Had powerplanes on layer up and down.  Necessary to make a small change and removed two power plans.  Fact my change and I tried to put the powerplanes back, but I'm locked - can't select layer but can select net powerplane attached too.  Many remote islands were left after the removal of the two powerplanes and remove all, still no help.

  Hi rich,

  I removed the power of the design plans. I hope this helps.

• Keyboard combinations to open the shortcuts with CTRL + ALT + < letter or digit >

  I like and use this function all day at work, as it works very well with my workflow.  However, the downside for me is that my office is too cluttered with shortcuts to programs and files that I never need to see because I will only use the keyboard combo to open.  Yet, if I put one of the shortcuts within a folder on the desktop, the combo keyboard no longer works...

  At home I use fences and shortcuts still work and I really like it.  Unfortunately, the fences is not supported by our IT Department and therefore cannot install it.  I need windows built in functionality.

  Is there somewhere I can store all my shortcuts so that I should not watch all of them on my desktop but the keyboard shortcut (ctrl + alt +) will still work? Or any other feature where I can get the same result to a blank desktop but use the keyboard to open the files/programs?

  Thank you!

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  According to the description of the issue, I recommend you post your query in the TechNet Forums. TechNet is looked at by the other professionals that would be more than likely be able to help.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information is useful.

• Cannot select the drive (NAS) on Windows Media Center

  Original title: cannot select the drive (NAS)

  My HTPC uses a small SSD 30gig as an OS drive, with all the media stored on a 2 TB WD MyBook Live all connected via gigabit ethernet.  The NAS is mapped by Win7 Premium as Z: and is visible for Win 7 and all other programs, including iTunes and XBMC.  In Media Center settings-> TV-> check the possibility of the recorder are grayed out (+/-buttons) and the drive C: of SSD is the only option.  What can I do to get the WMC to see the SIN?  Is there another setting of mapping I should use?

  Also, as a side note, there is no option to change the quality of the recording at all.  Installer below.  If any other information is needed, let me know.

  ASRock m - itx E-350 APU/MB
  Kingston SSD now V series SSD 30gig
  Western Digital My Book Live 2 TB
  Cisco/Linksys E2000 Wireless N Router
  PCTV usb TV Tuner (HD capable) with on the HDTV antenna
  Win7 Premium

  Record TV directly to a network location is not supported.

  You can submit your comments here: http://mymfe.microsoft.com/Windows7/Feedback.aspx?formID=195

• Cannot select the device scanner, AIO F380, MacBook Pro

  Cannot select the device scanner, AIO F380, MacBook Pro

  Thank you, Sean. I found out what I needed to know to fix the DIF from a document from hp customer service. I was able to fix by restarting, it is to unplug the usb cable first from the printer, wait 5 seconds, plug the cable back in. Then I desconnected the cable from the computer, wait 5 seconds and plugged.

  Duh!

  Thanks for responding.

• Cannot select the Dictionary view user USER_TAB_COMMENT?

  Hello.
  
  I have this weird problem in 11.2.0.3
  
  I cannot select the view of the USER_TAB_COMMENT of a user dictionary, but others can.
  If I try to describe it, I get ORA-00942 and ORA-04043 messages.
  
  Here is my attempt. I create a comment on a table, try desc or select the view from the dictionary. Then connect with SYS and select the comment in the view "dba" to check if the comment was created:

  SQL> conn RODOLFO
  Introduzca la contraseña:
  Conectado.
  SQL> show user
  USER es "RODOLFO"
  SQL> comment on table DOCUMENTILLOS is 'This is a comment';
  
  Comentario creado.
  
  SQL> select table_name, comments from user_tab_comments;
  select table_name, comments from user_tab_comments
                                   *
  ERROR en línea 1:
  ORA-00942: la tabla o vista no existe
  
  SQL> desc user_tab_comments;
  ERROR:
  ORA-04043: el objeto "SYS"."DBA_TAB_COMMENTS" no existe
  
  
  SQL> desc all_tab_comments;
  ERROR:
  ORA-04043: el objeto "SYS"."DBA_TAB_COMMENTS" no existe
  
  
  SQL> conn / as sysdba
  Conectado.
  SQL> show user
  USER es "SYS"
  SQL> select owner, table_name, comments from dba_tab_comments
    2  where owner = 'RODOLFO' and table_name = 'DOCUMENTILLOS'
    3  ;
  
  OWNER                          TABLE_NAME
  ------------------------------ ------------------------------
  COMMENTS
  --------------------------------------------------------------------------------
  RODOLFO                       DOCUMENTILLOS
  This is a comment
  
  
  SQL>

  Other users, I don't have this problem

  SQL> conn MANOLO
  Introduzca la contraseña:
  Conectado.
  SQL> show user
  USER es "MANOLO"
  SQL> comment on table DOCS is 'This is a comment';
  
  Comentario creado.
  
  SQL> select table_name, comments from user_tab_comments where table_name = 'DOCS';
  
  TABLE_NAME
  ------------------------------
  COMMENTS
  --------------------------------------------------------------------------------
  DOCS
  This is a comment

  Clues why this is happening?
  
  Kind regards.

  elvegaa_esp wrote:
  What do you think?

  OK, the question is in the place where he is not pointing?

  Edit:
  Oh, it looks that it points to dba_tab_comments. Since your original post:

  desc user_tab_comments;
  ERROR:
  ORA-04043: el objeto "SYS"."DBA_TAB_COMMENTS" no existe
  

  Who do not have the right of Rodolfo.

  Thus, final to get rid of him.

  And a good thing that you do not 'go to your DBA"as suggested. It was just to choose the wrong solution to an unknown problem.

  Concerning
  Peter

  Published by: Peter on March 11, 2013 08:49

• How to use just 1 click away with the move (v command) tool to select the layer in the Group?

  I'm on Snow Leopard 10.6.8 Photoshop CS3 10.0.

  Is it possible to click only once with "V command" to select a layer in a group?

  I used to be able to do and on my laptop I can do now (same OS and Photoshop), but the mac that I use for my design work won't... I must also, right-click and select the layer highlighted. I have a document a lot of multilayer Photoshop with many groups, and it is an extra step of your time.

  Is there a preference I can turn on? Or some other simple typo?

  Thank you very much!

  Select the tool move and set the options of the control bar. By default, it took to select a group, simply change layer.

• Select the layer function in action

  I have three layers with text in different languages. I want to record in three different PNG files.

  I tried to do action, select the layer, hide it and save it. Select another layer, then do the same thing. But the selection of layers is not saved to the action.

  Is there a solution?

  big thank you

  No, I don't think. The selections are what they mean - interactive decisions which provide a context for a tool or a command. What you would require a script, and even in this case, you have to take care to name the layers properly in the first place...

  Mylenium

• JS CS4: Create the variable for the active layer, and then select the layer at the end of a script

  I'm come white with the verbiage and spin my wheels with OMV guide and script.

  var myOriginalLayer = app.activeDocument.layers.item (0);
  Alert (myOriginalLayer)

  Returns "layer object" and not the name of the layer.

  var myOriginalLayer = app.activeDocument.layers.lastItem () .name;

  Returns the name of the layer I want but not by choice.

  I am challenged on how to select the layer.

  Hi John,.

  The difference lies in that the [Object Layer] is the real object, and the 'name' is a property - like color.

  You can use one of these two approaches:

  var myOriginalLayer = app.activeDocument.layers.item (0);
  Alert (myOriginalLayer.Name);

  hosts the original layer object, and you can see the name if necessary :-)

  For re - select the layer, use

  app.activeDocument.activeLayer = myOriginalLayer;

  You can also select name goes like

  var myOriginalLayerNAME = app.activeDocument.layers.lastItem () .name;

  ...

  app.activeDocument.activeLayer = app.activeDocument.layers.item (myOriginalLayerNAME);

  I also noted the following:

  app.activeDocument.layers.item (0) points to the first layer of your document; not the 'active'. Similarly, app.activeDocument.layers.lastItem () points only to the very last. I don't know if the order of the activeDocument.layers array mimicks the order as shown in the tags palette, but I hope for it :-)

  To get/set the active layer, use app.activeDocument.activeLayer as shown above.

• Cannot open the layer sets

  so im painting cars for nr2003 and I got a basic plan with layer sets that I can't open. I can simplify it, but it flattens only the confined layers. im sure that there are several layers in it. can someone help me with layer sets?  I leave when I have an answer on how to open them in photoshop elements 2.0.

  Try something like this:

  Press Shift + Ctrl + Alt + E, which should make a layer merged after the selected layer and below the layers that were on the whole will be.

• WIN8 cannot select the user when connecting more

  I used to have the option to select the user to connect as but now I have a screen that says:

  Press Ctrl + Alt + Delete or use the Windows Security button to unlock

  When I hit Ctrl + Alt + Delete I get only the most recent user login.  If I hit the left arrow right top left of the image, I must return to the Ctrl + Alt + Delete screen.  There is no way I can see to select another user.

  If the current user remembers actually disconnect from the screen Ctrl + Alt + Delete I am taken to a login with a choice of the users screen.

  This used to work and I don't know if my 5 yo changed something or if a updated Windows did something.  But my wife and son both need to use this notebook so I really need separate accounts.

  I found a few long really complex stuff on the ' net on the definition of the strategy group and fiddle with the registry but I know my 5 yo did nothing like that.

  How do I change back?

  Dennis

  PS what is the "Windows Security button" anyway?

  I realized that I had recently installed Cisco AnyConnect VPN software to connect to the work.  Which of - installed and now life is still happy.  I will contact Cisco.

  Sorry for the short reply above.  Validation has been broken here earlier today and several machines at the same time making a response and a new post, I didn't type a bunch just to get the "Oops, something went wrong" again.

  Dennis

• Cannot select the text to change

  I inherited a document and I can't change the text on a page. I tried the different layers but cannot select same text.

  I use CC 2014.0

  Brian

  Is the text on the master?

  It is on a locked layer?

  The text block is locked?

  Something is above the text frame?

• "Control Click" to select the layer when it is in a group?

  You can keep the [Ctrl] key and click on an element in your document to select its layer. However, if click you on something that is within a group, the entire group is selected. Is there a way to get around this other that right click and selecting its layer in the context menu?

  What version of photoshop?

  CS 3: next to the check box, you can choose "group" or "layer".

  miss_marple

• name of the executable file "ctrl-alt-del".

  On my laptop, the bar at the top of the list of active programs and process window has its top bar missing. This is what happens when you press Ctrl-alt-delete. If I knew the name of this program I could copy one from a computer that works properly. What's his name?

  This is the Task Manager. Double-click the outer border and the tabs reappear.

• Windows Vista has transformed the landscape and Ctrl + alt + arrow does not help us

  Looks like a shortcut key turned on the side windows vista and when I try to press ctrl + alt + arrow to turn common sense will not work.  I hope someone can help.

  Joanna

  Press Ctrl & Alt keys and use the arrows to rotate back.

  According to the graphics card on your computer, these can be alternatives.

  Right click on the desktop | Graphics options | Rotation.

  Right click on the desktop | Screen resolution | Orientation.