Cannot separate a cluster.

Hi all

I'm trying to unbundle a cluster to retrieve an array of joint coordinates of a kinect. For some reason, I get an error (see image) when I join the cluster wire one "ungroup by name. In a Subvi I joined (GetJointPosition.vi), it performs the same procedure and it works. I use the wrapper from this document or:

https://decibel.NI.com/content/docs/doc-16978

Any help would be appreciated.

Thank you!

It's because you're trying to separate a table.  You index the clusters on the table to unbundle the.  What exactly are you trying to do here?

Tags: NI Software

Similar Questions

  • VSA installed, you cannot create the cluster "VSA unavailable Cluster"

    Hi guys

    At home, I have 2 servers ESXi with a vCenter 5 virtual running on one of these hosts (I know this is not supported or the best practice, because failure of the host with vCenter, only remains of the hosts and it doesn't have the majority because of the loss of VSA service and a host). However, I think that I have an error or an obstacle not related to this.

    Also, I plan on cold migration (first storage vMotion, deleting the VM of the inventory, adding to another host) the vCenter, so this problem should be addressed in the near future...

    Currently, I have installed the Manager of VSA on the vCenter server and when I open on my client vSphere client, I get the VSA Manager tab but when I open it, it says "Loading" and then a Flash-style/VMware View management console style dialog box pops up saying "the VSA cluster is unavailable: VC Session creation has failed." with a title "VSA Cluster unavailable."

    What I am doing wrong? I can't find much documentation on the installation of a VSA, so a little help would be appreciated by a Belgian engineer VMware junior and learning

    I have enough available storage. One of the hosts I have a 160 GB SSD and 2 TB of available HARD drive, on the other a 80 GB SSD and a volume of 320GB RAID 1 presented by a LSI Logic Controller. All of them are mounted...

    VSA Manager has the same error as reported before

    2011-12-12 16:29:28, 141 338 [SessionService] [http - 127.0.0.1 - 8080-6] ERROR - cannot get the link of the extension
    org. Apache.Axis2.AxisFault: cantTunnel00: 192.168.8.23:80 HTTP/1.1 404 Not Found

    Your screenshot also indicated that vCenter is installed on port 8081. It's conssistent with the PuTTY test done before. You probably have something else listening on port 80. VSA 1.0 release requires that vCenter is Installer to the default HTTP port, port 80, which should be fixed in later versions.

  • Cannot save the Cluster containing the server < servername >: Idispatch error

    I'm building a new environment of Oracle EPM 11.1.2.1. I installed and configured HFM on one server and the HFM web components on another server. The server of HFM, all configuration tasks have managed including the registry servers and clusters. When I configure the HFM web server all configured successfully with the exception of the clusters and servers to register. It comes with an 'X' red and says failed.

    When I look in the configuration log, I see the following errors related to the cluster configuration:

    [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] trace: custom tasks: register the application servers / Clusters for product HFM
    [2012 01-18 T 09: 22:38.793 - 07:00] [EPMCFG] [NOTIFICATION] [EPMCFG-05543] [oracle. EPMCFG] [tid: 19] [ecid: 0000JJlc4do76Empoos1yY1F5j62000004, 0] [SRC_CLASS: com.hyperion.hfm.config.HfmClusterRegistrationTaskProcessor] registered clusters:, HFM_TQA
    [2012 01-18 T 09: 22:38.793 - 07:00] [EPMCFG] [NOTIFICATION] [EPMCFG-05544] [oracle. EPMCFG] [tid: 19] [ecid: 0000JJlc4do76Empoos1yY1F5j62000004, 0] [SRC_CLASS: com.hyperion.hfm.config.HfmClusterRegistrationTaskProcessor] registered server: CGYAP1167
    [2012 01-18 T 09: 22:38.852 - 07:00] [EPMCFG] [WARNING] [EPMCFG-02067] [oracle. EPMCFG] [tid: 19] [ecid: 0000JJlc4do76Empoos1yY1F5j62000004, 0] [SRC_CLASS: com.hyperion.hfm.config.hfmregistry.HFMRegistry] * error during record HFM Cluster configuration: {0} [[*]]
    java.lang.RuntimeException: cannot save the server CGYAP1167: IDispatch #1553 error
    at com.hyperion.hfm.config.EPMWindowsConfigJNI.RegisterServer (Native Method)
    at com.hyperion.hfm.config.hfmregistry.HFMRegistry.configureHFMClusterRegistration(HFMRegistry.java:626)
    at com.hyperion.hfm.config.HfmClusterRegistrationTaskProcessor.execute(HfmClusterRegistrationTaskProcessor.java:99)
    at com.hyperion.cis.CustomTaskProcessor.execute(CustomTaskProcessor.java:94)
    at com.hyperion.config.wizard.impl.RunAllTasks.executeCustomTask(RunAllTasks.java:832)
    at com.hyperion.config.wizard.impl.RunAllTasks.execute(RunAllTasks.java:480)
    at com.hyperion.config.wizard.impl.RunnAllTasksState.run(RunnAllTasksState.java:90)
    at java.lang.Thread.run(Thread.java:619)

    ]]
    [2012 01-18 T 09: 22:38.853 - 07:00] [EPMCFG] [ERROR] [EPMCFG-05020] [oracle. EPMCFG] [tid: 19] [ecid: 0000JJlc4do76Empoos1yY1F5j62000004, 0] [SRC_CLASS: com.hyperion.hfm.config.HfmClusterRegistrationTaskProcessor] error: error when configuring Cluster HFM registrationFailed to register the server CGYAP1167: IDispatch #1553 error
    [2012 01-18 T 09: 22:38.865 - 07:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle. EPMCFG] [tid: 19] [ecid: 0000JJlc4do76Empoos1yY1F5j62000004, 0] [SRC_CLASS: com.hyperion.config.wizard.impl.RunAllTasks] trace: running a custom task: register application servers / Clusters for product HFM

    Any ideas? I am running Windows 2008R2 64 Bit Enterprise on all servers. Oracle 11.2.0.2 RDBMS.

    Thank you

    Mike

    Published by: user2704998 on January 18, 2012 08:48

    Well, it really sounds like he can't connect then Firewall preventing. You have to find a way to turn them off because it is a sine qua non to disable firewall between servers to install Hyperion. I'm sorry.

    Pablo

  • cannot place the cluster in table

    I hope that this is a stupid question after a long day of programming.

    I can't insert this cluster in this table.  I did it for years, but for some reason any that it does not work now.

    Please notify

    Cool, that's all!

    I was able to add my decorations, after you add the cluster without decoration, in the table.

    I have attached my now (what I think) is my cool looking for control.

    Thank you

    Dan

  • HFM 11.1.2.4 cannot find the Cluster HFM

    Hello

    I installed and configure EMP 11.1.2.4 in exalytics without any error. When I try to create an application, there is error Houston-29000 and ADF_FACES-60096.

    When I checked the oracle-EMP-fm-hsx - server.log. There is error as below. I tried the ldd, the xfmdatasources.exe and found there some lack of shared libraries. I tried to add the paths of these missing libraries in the setEnv.sh and error still occurred.

    [2015 06-29 T 16: 47:57.989 + 08:00] [FM] [ERROR] [] [oracle. FM. HSX. SERVER.oracle.epm.fm.hsxserver.HsxModuleManager] [tid: 10] [ecid: 0000KsyW5YH7m3T6yBmZMG1L ^ GOv000000, 0] [SRC_CLASS: oracle.epm.fm.hsxserver.HsxModuleManager] [SRC_METHOD: initialzeModules] an error occurred during initialization of the module oracle.epm.fm.dal.DALHsxModuleInterface. [[
    oracle.epm.fm.common.exception.HFMException: EPMHFM-65559: dbPort property is not valid for HIT registry component customURL:APP_HFM_EPM_HFM.
    at oracle.epm.fm.hssservice.RegistryWrapper.getRegistryProperty(RegistryWrapper.java:332)
    at oracle.epm.fm.hssservice.RegistryWrapper.getDataSourceProperty(RegistryWrapper.java:464)
    at oracle.epm.fm.hssservice.RegistryWrapper.getStringPropertyValue(RegistryWrapper.java:1318)
    at oracle.epm.fm.hssservice.HITRegistryManager.getStringPropertyValue(HITRegistryManager.java:295)
    at oracle.epm.fm.hssservice.HITRegistryManager.getFMDBConnectionInfo(HITRegistryManager.java:414)
    at oracle.epm.fm.dal.manager.DALDataSource.initialize(DALDataSource.java:73)
    at oracle.epm.fm.dal.DALModule.initialize(DALModule.java:58)
    at oracle.epm.fm.dal.DALHsxModuleInterface.initialize(DALHsxModuleInterface.java:32)
    at oracle.epm.fm.hsxserver.HsxModuleManager.initialzeModules(HsxModuleManager.java:86)
    at oracle.epm.fm.hsxserver.HsxModuleManager.preServiceStartup(HsxModuleManager.java:59)
    at oracle.epm.fm.hsxserver.HsxServer.init(HsxServer.java:41)
    at oracle.epm.fm.hsxserver.HsxServer.main(HsxServer.java:27)

    ]]
    [2015 06-29 T 16: 47:57.993 + 08:00] [FM] [ERROR] [] [oracle. FM. HSX. SERVER.oracle.epm.fm.hsxserver.HsxServer] [tid: 10] [ecid: 0000KsyW5YH7m3T6yBmZMG1L ^ GOv000000, 0] [SRC_CLASS: oracle.epm.fm.hsxserver.HsxServer] [SRC_METHOD: init] an error occurred during the start of service HSX_SERVER_NAME. [[
    oracle.epm.fm.common.exception.HFMException: EPMHFM-66021: an error occurred during initialization of the module oracle.epm.fm.dal.DALHsxModuleInterface.
    at oracle.epm.fm.hsxserver.HsxModuleManager.initialzeModules(HsxModuleManager.java:94)
    at oracle.epm.fm.hsxserver.HsxModuleManager.preServiceStartup(HsxModuleManager.java:59)
    at oracle.epm.fm.hsxserver.HsxServer.init(HsxServer.java:41)
    at oracle.epm.fm.hsxserver.HsxServer.main(HsxServer.java:27)

    ]]
    [2015 06-29 T 16: 47:57.994 + 08:00] [FM] [NOTIFICATION] [] [oracle. FM. HSX. SERVER.oracle.epm.fm.hsxserver.HsxServer] [tid: 11] [ecid: 0000KsyW5YH7m3T6yBmZMG1L ^ GOv000000, 0:54] [SRC_CLASS: oracle.epm.fm.hsxserver.HsxServer] [SRC_METHOD: shutdownServer] closing...

    Concerning

    SL

    Ok. Here is the problem. This component is missing dbPort property. Add manually would help him. I have STRONGLY SUGGEST to KEEP A FOUNDATION RETURN the DATABASE before running the command below in the case where if there are problems.

    epmsys_registry #d75d46139458505bS5f20eb6614e42513716S7b9b/@dbPort 1521 addproperty

  • Cannot separate the model

    I just upgraded to DW8 and now I can't disassociate a model. The option is there, but when I click it, nothing happens. If I attach a model - what works. I have run the repair of DW, but now wonder if it is a parameter any. Your opinion?

    Thank you

    He is a third child of level. Apparently DW8 doesn't off this long to. It works with the parent pages. Thank you for your time.

  • Cluster nodes cannot ping each other

    Hello

    I recently put one of our old clusters online it's a server poweredge 1855. I work at 5 knots, and there a PowerConnect 5316 M switch on the back. 5316M has only 1 cable connecting the switch to uplink.

    Each blade has 2 NIC one of them is a NIC, with a normal IP on our range of normal production. All blades can ping this address each other, and they all have internet.

    The other NETWORK adapter is what I use for live migration, or pulsation of cluster or something... Whatever it is, it has a different range with no gateway (172.50.1.x)

    Now 3 of the blades can all ping eachother, but not the other 2. And 2 that can not ping, can ping each other. It seems that the 2 are on the same VLAN, and the other 3 are on the same VLAN.

    The problem I have, is the switch shows them all on the VLAN by default... and one thing that I can't work... If the servers all have 2 network cards, but there are only 10 ports on the internal switch?... so, how can I set or the other card NETWORK on one VLAN different?

    The configuration of the switch is here:

    console# show runspanning-tree mode mstpspanning-tree mst configurationinstance 1 add vlan 1,15,900instance 2 add vlan 2-3name PDSNetherlands1revision 900exitspanning-tree mst 1 priority 57344spanning-tree mst 2 priority 57344interface port-channel 1description 'LACPGROUP-M5316M-SW2'exitinterface port-channel 1switchport mode generalexitvlan databasevlan 2-3,15,238,328-329,501,638,900exitinterface port-channel 1switchport general allowed vlan add 15exitinterface port-channel 1switchport general allowed vlan add 900exitinterface vlan 2name "PDS Internet"exitinterface vlan 3name "PDS Wireless"exitinterface vlan 15name "PDS ServerInfrastructure"exitinterface vlan 238name "SHELL GI-Desktops"exitinterface vlan 328name "SHELL Unix-Desktops"exitinterface vlan 329name "SHELL Windows-Servers"exitinterface vlan 501name "SHELL Linux-Desktops"exitinterface vlan 638name "SHELL IP-Telephony"exitinterface vlan 900name "PDS Workstations"exitinterface range ethernet g(11-16)channel-group 1 mode autoexitinterface vlan 1ip address 10.254.254.253 255.0.0.0exitip default-gateway 10.0.0.1logging 10.0.1.56  severity debugging facility local0username admin password 5ebe2294ecd0e0f08eab7690d2a6ee69 level 15 encryptedusername admin_jon password ea4462b55746d29a4a0fc44c3db06b95 level 15 encryptedusername administrator password 22d4734b069e91ceebdf297701005b28 level 15 encryptedsnmp-server community private rwsntp client poll timer 60sntp unicast client enablesntp anycast client enablesntp broadcast client enablesntp server 64.90.182.55 pollconsole#

    Any help would be appreciated, I cannot complete the cluster validation wizard until i can crack this ..

    Kind Regards,

    Jon

    This document does a good job of showing how interconnections.

    www.Dell.com/.../ps3q05-20050163-Brundridge-OE.pdf

    Module e/s 1 goes to port 1 and i/o 2 module goes to port 2 of the LOM standard.

    It is therefore useful to check what ports are used by the server. If the 3 are on port 1 and then the other 2 are on port 2, try to get all the 172.50.1.x addresses assigned to port 2 for example.

  • : Cannot communicate with the Cluster ready Services

    Hi all
    We have a two-node cluster for our QA environment. Version database 11.2.0.2. UNIX people upgraded the kernel version and we relinked binaries. After the restoration of the links, the CRSD is not coming, and therefore the RAC database is DOWN.

    Here are some checks:
    +ASM1@argalephdbqa1:/u01/app/oragrid/11.2.0.2/bin>./crsctl start cluster
CRS-2672: Attempting to start 'ora.crsd' on 'argalephdbqa1'
CRS-2676: Start of 'ora.crsd' on 'argalephdbqa1' succeeded
+ASM1@argalephdbqa1:/u01/app/oragrid/11.2.0.2/bin>./crsctl start has
CRS-4640: Oracle High Availability Services is already active
CRS-4000: Command Start failed, or completed with errors.
+ASM1@argalephdbqa1:/u01/app/oragrid/11.2.0.2/bin>id
uid=0(root) gid=0(root) groups=0(root),1(bin),2(daemon),3(sys),4(adm),6(disk),10(wheel)
+ASM1@argalephdbqa1:/u01/app/oragrid/11.2.0.2/bin>./crsctl status resource -t
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4000: Command Status failed, or completed with errors.
+ASM1@argalephdbqa1:/u01/app/oragrid/11.2.0.2/bin>./crsctl start crs
CRS-4640: Oracle High Availability Services is already active
CRS-4000: Command Start failed, or completed with errors.

+ASM1@argalephdbqa1:/u01/app/oragrid/11.2.0.2/bin>sqlplus '/as sysasm'

SQL*Plus: Release 11.2.0.2.0 Production on Thu Dec 13 22:30:08 2012

Copyright (c) 1982, 2010, Oracle.  All rights reserved.


Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Real Application Clusters and Automatic Storage Management options

SQL> select name, state from v$asm_diskgroup;

NAME                           STATE
------------------------------ -----------
DATA1                          MOUNTED
FLASH                          MOUNTED
QUORUM                         MOUNTED

+ASM1@argalephdbqa1:/u01/app/oragrid/11.2.0.2/bin>./crsctl stat res -t -init
--------------------------------------------------------------------------------
NAME           TARGET  STATE        SERVER                   STATE_DETAILS
--------------------------------------------------------------------------------
Cluster Resources
--------------------------------------------------------------------------------
ora.asm
      1        ONLINE  ONLINE       argalephdbqa1            Started
ora.cluster_interconnect.haip
      1        ONLINE  ONLINE       argalephdbqa1
ora.crf
      1        ONLINE  ONLINE       argalephdbqa1
ora.crsd
      1        ONLINE  OFFLINE
ora.cssd
      1        ONLINE  ONLINE       argalephdbqa1
ora.cssdmonitor
      1        ONLINE  ONLINE       argalephdbqa1
ora.ctssd
      1        ONLINE  ONLINE       argalephdbqa1            OBSERVER
ora.diskmon
      1        ONLINE  ONLINE       argalephdbqa1
ora.drivers.acfs
      1        ONLINE  ONLINE       argalephdbqa1
ora.evmd
      1        ONLINE  INTERMEDIATE argalephdbqa1
ora.gipcd
      1        ONLINE  ONLINE       argalephdbqa1
ora.gpnpd
      1        ONLINE  ONLINE       argalephdbqa1
ora.mdnsd
      1        ONLINE  ONLINE       argalephdbqa1
+ASM1@argalephdbqa1:/u01/app/oragrid/11.2.0.2/bin>crsctl stat res -t
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4000: Command Status failed, or completed with errors.
+ASM1@argalephdbqa1:/u01/app/oragrid/11.2.0.2/bin>crsctl query css votedisk
##  STATE    File Universal Id                File Name Disk group
--  -----    -----------------                --------- ---------
 1. ONLINE   8faab9ebb1514f7fbf2360c9cbd32b77 (ORCL:QUORUM_DISK1_1) [QUORUM]
 2. ONLINE   18ce8b4afc2f4f8fbf908de3848d893e (ORCL:QUORUM_DISK1_2) [QUORUM]
 3. ONLINE   89822108feb64f06bfa324d5d8ea4928 (ORCL:QUORUM_DISK2_1) [QUORUM]
Located 3 voting disk(s).
+ASM1@argalephdbqa1:/u01/app/oragrid/11.2.0.2/bin>ocrcheck
PROT-602: Failed to retrieve data from the cluster registry
PROC-26: Error while accessing the physical storage
ORA-27300: OS system dependent operation:open failed with status: 13
ORA-27301: OS failure message: Permission denied
ORA-27302: failure occurred at: sskgmsmr_7
    The entrances to some of the papers are:

    /U01/app/oragrid/11.2.0.2/log/argalephdbqa1/alertargalephdbqa1.log:
    +ASM1@argalephdbqa1:/u01/app/oragrid/11.2.0.2/log/argalephdbqa1>tail -10 alertargalephdbqa1.log
2012-12-13 22:24:54.733
[ohasd(10136)]CRS-2771:Maximum restart attempts reached for resource 'ora.crsd'; will not restart.
2012-12-13 22:54:02.426
[client(24168)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/app/oragrid/11.2.0.2/log/argalephdbqa1/client/ocrcheck_24168.log.
2012-12-13 22:57:23.301
[client(24312)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/app/oragrid/11.2.0.2/log/argalephdbqa1/client/crsctl_oracle.log.
2012-12-13 22:57:30.575
[client(24341)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/app/oragrid/11.2.0.2/log/argalephdbqa1/client/crsctl_oracle.log.
2012-12-13 22:57:40.981
[client(24531)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /u01/app/oragrid/11.2.0.2/log/argalephdbqa1/client/crsctl_oracle.log.
    /U01/app/oragrid/11.2.0.2/log/argalephdbqa1/CSSD/ocssd.log:
    +ASM1@argalephdbqa1:/u01/app/oragrid/11.2.0.2/log/argalephdbqa1/cssd>tail -10 ocssd.log
2012-12-13 23:09:01.671: [    CSSD][1116453184]clssnmSendingThread: sending status msg to all nodes
2012-12-13 23:09:01.671: [    CSSD][1116453184]clssnmSendingThread: sent 4 status msgs to all nodes
2012-12-13 23:09:05.679: [    CSSD][1116453184]clssnmSendingThread: sending status msg to all nodes
2012-12-13 23:09:05.679: [    CSSD][1116453184]clssnmSendingThread: sent 4 status msgs to all nodes
2012-12-13 23:09:09.687: [    CSSD][1116453184]clssnmSendingThread: sending status msg to all nodes
2012-12-13 23:09:09.687: [    CSSD][1116453184]clssnmSendingThread: sent 4 status msgs to all nodes
2012-12-13 23:09:14.697: [    CSSD][1116453184]clssnmSendingThread: sending status msg to all nodes
2012-12-13 23:09:14.697: [    CSSD][1116453184]clssnmSendingThread: sent 5 status msgs to all nodes
2012-12-13 23:09:19.707: [    CSSD][1116453184]clssnmSendingThread: sending status msg to all nodes
2012-12-13 23:09:19.707: [    CSSD][1116453184]clssnmSendingThread: sent 5 status msgs to all nodes
    /U01/app/oragrid/11.2.0.2/log/argalephdbqa1/crsd/crsd.log:
    +ASM1@argalephdbqa1:/u01/app/oragrid/11.2.0.2/log/argalephdbqa1/crsd>tail -15 crsd.log

2012-12-13 22:24:48.899: [  OCRRAW][3322856016]proprio_repairconf: Failed to retrieve the group public data. CSS ret code [20]
2012-12-13 22:24:48.901: [  OCRRAW][3322856016]proprioo: Failed to auto repair the OCR configuration.
2012-12-13 22:24:48.901: [  OCRRAW][3322856016]proprinit: Could not open raw device
2012-12-13 22:24:48.901: [  OCRASM][3322856016]proprasmcl: asmhandle is NULL
2012-12-13 22:24:48.903: [  OCRAPI][3322856016]a_init:16!: Backend init unsuccessful : [26]
2012-12-13 22:24:48.903: [  CRSOCR][3322856016] OCR context init failure.  Error: PROC-26: Error while accessing the physical storage
ORA-01031: insufficient privileges

2012-12-13 22:24:48.904: [ CRSMAIN][3322856016] Created alert : (:CRSD00111:) :  Could not init OCR, error: PROC-26: Error while accessing the physical storage
ORA-01031: insufficient privileges

2012-12-13 22:24:48.904: [    CRSD][3322856016][PANIC] CRSD exiting: Could not init OCR, code: 26
2012-12-13 22:24:48.904: [    CRSD][3322856016] Done.
    Any suggestion on how to continue?

    Martin.morono wrote:

    Any suggestion on how to continue?

    Filing of an SR (service request) with the support of the Oracle would be the prudent thing to do.

  • LabVIEW botches unbundle when cluster is changed

    • Define a cluster (typedef) as Characteristics.ctl wave and a VI that separate this cluster as Cluster rename Bug.vi.
    • Delete an item (Amplitude) of the cluster and add another to the end (background noise), so that the cluster always contains 3 elements such as the characteristics of the 2.ctl wave,.
    • Apply the changes.
    • The unbundle now uses the phase shift twice.  The first occurrence of phase shift is incorrectly wired amplitude; He must always say dephasing, and black, and the VI should be impassable.

    The same problem occurs if the VI that uses the cluster is not in memory when the cluster is changed.  This problem we often enough and is a major source of bugs and cause of the loss of time.  We understand that LabVIEW can not determine if the change in the name of the second element was intentional or a mistake made by the programmer.  We would prefer to get a broken VI and to solve the problem ourselves, rather than having LabVIEW to make erroneous assumptions.

    I can't reproduce this in LV8.5.1. What version do you use?

    What happens if you:

    delete an item
    apply the changes,
    Add another element,
    apply the changes.

    Kind regards

    Wiebe.

  • Which of the following functions assembles CLuster elements by their label opportunity

    Hello

    Reviews online sample DRESSED a question appears as follows:

    Which of the following functions assembles CLuster elements by their label opportunity

    a bundle

    b unbundling

    c unbundling by name

    d offers grouped by name

    My question is:

    Obviously, the answer is a or d but d cannot assemble a cluster while a do not group them by their property tags.

    Any ideas?

    Thank you

    Sean

    The answer is (a) - who ride using the labels, as shown here:

  • Fabric Interconnect join the cluster

    Hello! Experts:

    When I join a new FI the cluster, I have to get the same firmware on the new FI before he can join?

    It depends on what version of UCS

    I think that since 2.1.3 it will automatically synchronize the versions and therefore can join the cluster.

    Before, you have the message: version mismatch, cannot join the cluster.

    See the article by Jeffs: http://jeffsaidso.com/2014/05/cool-new-ucs-featurefirmware-sync/

  • ISE PSN node will not be joining the cluster

    Hi all

    Has anyone seen a problem where an NHP cannot join the cluster?

    We join node of PSN

    -Node is saved successfully (current synchronization)

    -1 hour later - node replication failure.

    -Replication synchronization failed because the secondary database is down

    I have a client where admin node and PSN are separated by the firewall.

    We let in two directions

    Admin <-->PSN

    ICMP

    HTTPS

    1521

    Firewall not showing drops.

    DNS and NTP are ok.

    Current topology is 1 NHP, 1 Admin node.

    Works very well in our test lab, but not clients environmnet.

    See you soon

    Peter.

    Thank you for the update we and good work on the search for the solution! You should probably mark it as resolved now

    In addition, it is quite rare (at least for me) for nodes of ISE to be separated by firewalls. There are a lot of ports/protocols that must be opened between them is usually more of a pain to manage. In addition, sometimes ports will change too. For example, the fueling port agent has been changed not too long ago...

    Thanks for the note!

  • $GRID_HOME/bin/crsctl check crs fails with CRS-4535: cannot communicate wit

    Hi all

    I have an instance RAC 11 GR 2 with 2 nodes running 11.2.0.3 on OEL 5 day 8 64-bit environment

    After a physical reboot of the node1 the cluster on node 1 will not start

    When I try to run the command on node 1 below

    $GRID_HOME/bin/crsctl check crs


    the following error appears

    CRS-4638: Oracle high availability Services is online
    CRS-4535: cannot communicate with Cluster Ready Services
    CRS-4530: communication failure communicating with Cluster Synchronization Services daemon
    CRS-4534: can not communicate with the event Manager

    Cluster node 2 and db instance on node 2 is running.

    When I try to run the command on node 1 below

    # ps - ef | grep d.bin
    root 7548 1 0 19:58? 00:00:05 /oracle/app/11.2.0/grid/bin/cssdmonitor
    root 9295 1 0 17:06? 00:01:03 /oracle/app/11.2.0/grid/bin/ohasd.bin restart
    Oracle 10085 1 0 17:07? 00:00:08 /oracle/app/11.2.0/grid/bin/oraagent.bin
    Oracle 10097 1 0 17:07? 00:00:00 /oracle/app/11.2.0/grid/bin/mdnsd.bin
    Oracle 10107 1 0 17:07? 00:00:08 /oracle/app/11.2.0/grid/bin/gpnpd.bin
    root 10118 1 0 17:07? 00:00:04 /oracle/app/11.2.0/grid/bin/orarootagent.bin
    Oracle 10121 1 0 17:07? 00:00:34 /oracle/app/11.2.0/grid/bin/gipcd.bin
    root 10135 1 6 17:07? 00:13:10 /oracle/app/11.2.0/grid/bin/osysmond.bin
    root 10327 1 0 17:07? 00:00:52 /oracle/app/11.2.0/grid/bin/ologgerd - M d /oracle/app/11.2.0/grid/crf/db/srv-bioradb1
    root of 11917 10052 0 20:32 pts/1 00:00:00 grep d.bin

    looking forward to doc or recommendation how to start clusterware on node1

    Thanks and greetings
    Soni

    Hello

    Offering to see metalink doc below.

    Top 5 Grid Infrastructure startup problems [ID 1368382.1]

    Thank you

  • Problem registering cluster in Hyperion Financial management.

    Hi all

    I have a sucessful 11.1.1.3 on another machine instance. I had installed the next component in my machine

    Financial management client
    Examples of financial management Applications
    Financial ADM management pilot

    When I try to register the cluster by providing the name of the server where the entire suite Hyperion has been installed, it is throwing error 'cannot save the cluster.

    Can someone help me solve this problem.

    Kind regards
    Richet

    Reading of:-http://john-goodwin.blogspot.com/2010/02/odi-series-will-real-odi-hfm-blog.html
    Just read the first half he crosses how configure the HFM client on a machine.

    See you soon

    John
    http://John-Goodwin.blogspot.com/

  • Design storage for VMS Server files

    Hello

    I need help. We expect the SAN for our file server VMs who currently have sizes of 2-3TBs volume, because its for a single Department and we cannot separate the directories of the volume.

    What we use is CX3 - 80 with 300 GB drives, what I thought was create between 3-4 DAEs Metaluns and LUNS for the ESX. However I'm not sure what LUN size I should use and VMware block size should I use if I have 2-3TBs volume sizes. What I do is rationalize some servers of files MS Cluster of virtual machines. Currently the file servers have 4 volumes of 1.6 to and I need to migrate these VM. So what I have is 3-4 VMs attached with data d:\ 1.6TBs drives each.

    Can anyone give me some advice on sizing and sizing of VMFS LUNs.

    Thank you very much

    If you want to go with vmfs (2 TB if it is the size you need), block size should be 8 If you want your s vmdk to 2 TB. There will be more chance for the wasted space.

    I agree with Fred and present the storage in the RDM.

Maybe you are looking for

  • DVD

    I want to copy a dvd on my iMac, how do I do that

  • No button "Windows 8 touch" in any version of FF.

    I use T100TA Asus transformer with a touch screen and Windows 8.1 on board. I really want to try the Metro for Firefox mode, but I can not find the needed button in the menu as described in the article: https://support.Mozilla.org/en-us/KB/quick-guid

  • HP Pavilion 500: Can I install my HP Pavilion 205t - 500 HD in HP Pavilion 500-490?

    My HP Pavilion 500 - 205t was destroyed by lightning. The HD is OK I bought an HP Pavilion 500-490 because the specifications were very close.  I want to use my HD 205 t. Both computers are Core i3-4130, 1 TB 7200 SATA 6 G 3.5 HDs, same OS (Windows 7

  • Recovery (Factory Reset)

    Hello I have a HP Probook 4730 s, I want to completely restore my laptop to factory settings and I have everything that I want to keep on backup. The only problem is the restoration. I have the recovery partition that has not been affected at all. Th

  • I reinstalled and reactivated Windows 7 Ultimate 64 bit.

    To be able to run additional memory, that I had to change the motherboard in my computer. So it took to reinstall Windows 7 Ultimate 64-bit and reactiving the software. No problem. I then tried to download updates only to get the message that they we