Cannot set resolution wide screen on Satellite A100

I have a Hanns G HG216D 22 "(visible de 21,6")) LCD display external, who hails from WSXGA (1680 x 1050) and is horrible to other resolutions. "
I can't select the correct resolution in XP or Vista (I know, because having failed I restored (clean install of authentic Pro with SP2 disc) XP then failed on XP used a Vista Business Upgrade disc to try Vista.)
But nothing helps: (.)

The laptop is a Toshiba A100 PSAA8 with a graphics processor Intel 945 G Chipset.

Here's what I've tried:

There is a driver on the disk of the specifically labeled monitor as for Vista 32-bit, so I used the disc have... 'trick' via Device Manager to force Vista to use this INF file, I tried adding EDID (or was - this CSD, something like that) data to the pilot (after driving backward before re - apply incase she thought it was the same driver), I tried PowerStrip, although I'm not familiar with it, 99% some it work well (, one of the first things I tried was using the specially created driver for this chipset that is designed to solve this problem very issue (http://www.Intel.com/support/Graphics/SB/CS-028366.htm)), any ideas?

The LCD has DDC2 and activated but EnTech MonInfo cannot get any data from it. I think I should go back to Linux; never had a technical problem I can't solve there (only DRM related issues, etc.), only problem I use this machine for work and don't mind using virtualization for some things but not for "critical to pay my rent" stuff!

I don't have another machine to test the screen either, as my sister lost with my laptop alternative.

Any help would be greatly appreciated :).

Hey Buddy,

Then I read a little in some forums on your question. The first question is: have you updated your BIOS? It's really important because many users in the forums Ubuntu has reported that, after that an updated bios updated widescreen stuff work. Since the you´re works with Vista, I would say firstly you update your BIOS, remove all drivers display with 'Driver Cleaner Pro' and then try the drivers from the website of intel again (as an especially for this wide screen problem)

Maybe it works, I confused why it doesn't since this chipset is designed to pull many of the higher resolutions and even all res widescreen 1680 x 1050 and 1440 x 900.

Just give a short answer on your situation. :)

Welcome them

P.S.: If you try with linux check this thread on the ubuntu forums:
http://UbuntuForums.org/archive/index.php/t-454805.html

Tags: Toshiba

Similar Questions

  • How to activate the resolutions of wide screen on Satellite Pro A10

    Hello

    I looked through various positions through the forums, but have not found how to activate the wide screen on a Toshiba Satellite Pro A10 resolutions.
    The 2 following wires offer partial answers:

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19570
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19677

    The solution in the 2nd post won't work because the A10 has an Intel graphics card, not a Nvidia. He suggested also, modify the INF of the graphics driver, but to extract the driver (SA10B2DP.exe) file includes an installer, but no INF.

    Just look to see if anyone has any advice on how to activate the resolutions such as 1440 x 900 or 1680 x 1050.

    Thank you

    Hello

    you mean on the external screen, Don t you? If you have an intel chipset graphic why Don t you download the drivers from the website of intel.
    Maybe it offers a resolution of the external display.

    I don't know if the res external can be set to widescreen on this chipset as the drivers are somewhat limited...
    Can you describe what monitor you have and how you connect it to your machine. (d-sub or DVI)?

    Would appreciate some reactions :)

    Welcome them

  • Re: Cannot install Win7 driver display for Satellite A100-159

    Hello world

    I have a problem with my old laptop satellite a100-159. I still use it as a second computer. Given that the display drivers for windows 7 are available at toshiba, I decided to update the laptop from XP to 7. After the update, I downloaded the display driver for win 7 (http://support1.toshiba-tro.de/tedd-files2/0/display-20091109135931.zip)

    But here's the problem: when I unzip the file, the file "tinstall.exe" does not work. It comes to the .exe file that needs to install the driver. I also had the message "this program could not have installed correctly". As of the present results, I'm looking to 1024 x 768 while the resolution is 1280 x 800.

    Any suggestions for me? I know that the laptop is old, but that the correct display driver, it is rather useless.

    Jeroen

    Please try to run the install using setup.exe.

  • How to activate the resolution wide screen to external monitor on Equium A60?

    Hello

    I had an Equium A60 with an ATI Radion 7000 mobility grahpics chip in it. Earlier the LCD is dead and has decided to use an external monitor rather than replace it. However, the external monitor is a monitor 22 '' widescreen computer does not provide a display suitable for resolution. Is it possible to update the graphics driver to provide the wide screen formats. I looked on the toshiba updates, but there is nothing new there, and ATI are not ready to support offer it on a laptop.

    Any ideas?

    Hello

    You can't choose your preferred resolution because the graphics driver does not support.
    Eventually the 3rd party driver support your favorite display resolution, but to be honest I wouldn't use these drivers because it could cause serious difficulties for laptop.
    The point is that these 3 third-party drivers are untested and not certified by Toshiba.
    Therefore, the use is at your own risk.

    Good bye

  • Flickering screen on Satellite A100

    First of all, I would like to say hello to everyone...

    My colleague at work came to me with his laptop, which is a Satellite A100 with a screen flicker problem.
    Its nothing major, but the screen flickers constantly randomly as it s refreshing.
    I tried an external monitor and it is very good, so I guess that the LCD, 'FL inverter Board' or connectors. There is no distortion of colors, no lines/ladies on the screen and no backlight problem.

    I'm not a genius in laptops, but I fixed mine with success.

    I disassembled the computer laptop and just had a glance, made sure no loose connections, dust etc put back together and still had the same problem with the screen flicker.

    Now, I have no idea of what a "FL inverter board" is, or if this could be the problem, so any information would be appreciated.
    It s is not prepared to buy a new LCD screen, only to find out that it is this UPS widget.

    Thanks in advance

    I think that the FL inverter converts high voltage to power the Tube FL. You must be careful with the ups because it can give you an electric shock.

    You say that there is no problem of backlight, so it would not be the inverter at fault.

    If this is the Image that flashes (while the backlight is always on), then there may be a bad connection behind the screen, or a part should be replaced (for example, the LCD, the cable or the graphics card).

  • Cannot install driver LAN on my Satellite A100-036

    I change my Satellite A100 - 036 operating system for Windows XP SP2 home edition and the ethernet controller not installed it.
    I downloaded almost all the LAN driver on the Web from Toshiba site and it will not install.

    Someone help me pls?

    The BIOS must be updated to version XP!
    And the LAN driver must be installed from the Device Manager!

  • Cannot install Toshiba Virtual Sound on Satellite A100 - 01 L

    My new Satellite A100 - 01 L, PSAARE

    Have a problem! When I want to install Toshiba Virtual Sound Utility said installation that I have incompatible computer!
    Whats wrong here? Why I can not install this utility?

    Hello

    are you sure to you´ve downloaded the right version to the right (model) type of your machine? Double check it and download again.
    I would try it with this link if it is not already:

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
    Toshiba - download drivers:

    Welcome them

  • Cannot install driver LAN/WLAN on Satellite A100 - 289 PSAA9E Win XP

    Hello

    I installed Windows XP on a Satellite A100 - 289 PSAA9E, but I can not install the network and WLAN page driver drivers.
    I always get the message that no driver regrets were found (I manually chose the directory with the downloaded drivers)

    Can someone help me?
    Where can I get the right drivers network controller vor and WLAN card?

    Hello

    As much as I know Sam A100 PSAA9E series supports Intel 3945ABG wireless card and also an Intel LAN card.
    Driver WLAN can be found here:
    http://APS2.toshiba-tro.de/WLAN/

    On the European driver Toshiba page I could find drivers for Satellite A100 PSAA9E series.
    But note; You must choose the Archive in the type of product because it old series.
    There are two different LAN drivers;
    -LAN driver v 9.2.24 for Ethernet Pro1000
    -LAN driver v 8.0.43.0 for Ethernet Pro100

    In order to check both!

  • Cannot install graphic driver on my Satellite A100

    I have the Satellite A100 with a mobility radeon X 1400 and it is impossible to change the graphics drivers: I'm stuck with the old version 6.14 and failed to install the new drivers ATI 6.7 or 6.8 :(

    Anyone have a solution?

    Thanks in advance

    Hello

    In general, the drivers available on the graphics card manufacturer s site are mainly designed for desktop computers and it is always recommended to use the drivers designed by producer for laptop. On this way the graphics card will be protected against overheating and suddenly get compromised.

    In any case, you can try to install it as shown in the previous announcement.

  • Equium A100-306: cannot set resolution 1440 x 900 on external monitor

    Has anyone encountered this problem? I searched the web without success and it doesn't seem to be all programs that will force the graphics in this resolution. Is only shown for linux-based systems which have a complex solution for this. I have a new A100-306.
    The maximum power that I get is 1280 x 1024, which is ok but lack just that final freshness.

    I think that the solution will be an update of the video bios but it is an update from the manufacturer and not a processor intel, a? As the machine is new he does not appear to be updated again. If anyone has a solution please post, if not Toshiba please quickly with an updated driver.

    Thank you

    Hello

    I read several candidate here in the forum on different screen resolutions that are not available for the external display.
    Fact is, if no resolution of the screen is not available, then the graphics driver doesn t contain the display resolution in the list. In this case you must use the common screen resolution which is available. But this isn't a problem.

    Furthermore, each screen support a clean resolution. I mean the screen with a resolution which is the best for this view. Then the screen and the image is very clear, and as you said crisp.

    On my screen I can pick several display resolutions, but the best resolution for my monitor 1280 x 800.

  • IMAQ video on the display mode - resolution wide screen

    I try to print the image of an EVS-1463RT to a monitor. The video IMAQ RT Out VI works as expected, however the counterparty IMAQ Out video display Mode VI uses a resolution of display listed, of which there are only 6 possibilities of 640 x 480 to 1920 x 1440. I want to say a resolution that fits my screen. Is it possible to do?

    Thank you.

    Sorry, that the mechanism to display current image on the virtual server Exchange is based on the VESA standard that doesn't support a certain set of fixed resolutions (and no widescreen variants).

    Eric

  • Cannot use the recovery with my Satellite A100 disc

    I have the Satellite Pro A100 Series, when I boot it up it tells me "Windows could not starte because the following file is missing or corrupt" \WINDOWS\SYSTEM32\CONFIG\SYSTEM
    I tried to restart with the recovery disk in and you press F12 for the boot menu, select CD/DVD and nothing happens.

    Any help or ideas would be great.

    Nothing happens?
    If I understand you well you are not able to boot from the disk? Have you tried another disc? I mean it might be that the recovery disk is noisy or something else.

    Check this box and give us feedback.

  • Cannot record audio wave on the Satellite A100-PSAA9

    Why I can't record Real Audio Conference with the RealTec driver provided on my A100 Toschiba in time?
    Options records data just, 'micro-Line In-CD' but vague is missing, why?

    I have another laptop from Asus with RealTec driver and he is it possible, on my Toshiba not, why?

    Hello

    Please read the solution in this tread - it will solve your problem.

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16446

    Sincerely
    Cornelius

  • Cannot install virtual surround on my Satellite A100 (PSAA8)

    I tried to install the update virtual sound vista on the download site, but when I try to install it, it gives me a massage that my computer does not support the virtual sound. Even I checked the site and it is in the supported list.

    That s strange!
    I also checked the European driver from Toshiba site and the A100 (PSAA8) unit is listed as a support.
    I think you should be able to install this virtual sound utility

    How did you install Vista drivers? Have you followed the recommendation of the installation instruction document?

    The proper installation order is important and necessary. If you will install the drivers and tools in the wrong order, another application could not work.

  • Cannot set the supervisor on the Satellite L755 BIOS password

    Hi, I hope someone can help me with this problem - I have a PC laptop toshiba L755 and has been implemented of the security protocols on the bios but could not configure the supervisor password.

    I registered the password of the user, as well as the hard drive - user and master password password worked for the password hard drive, but when I try to select (by pressing the arrow towards the bottom of the user password on the password of the bios section) the supervisor password , he jumps right over him.

    Please, any help with this would be greatly appreciated.

    Have you tried to set the supervisor password using option in Toshiba Assist > secure > supervisor password? It is the small Toshiba utility designed for recording of the supervisor password.

Maybe you are looking for