Cannot SSH in ASA after EZVPN configuration and do not specify "split-tunnel-political tunnelspecified.
Even after the "split-tunnel-policy tunnelspecified" specification with "split-tunnel-network-list value TUNNEL of SPLITTING" and denying all traffic to the public IP address of the ASA, I'm still not able to SSH in the firewall. Everything else seems to work OK, but I have to be able to handle the ASA from the public interface. In fact, I expect little given the mean one sa is the installer for the tunnel, and it would seem that a deny statement would be ignored, but perhaps there is a way around this. Thank you.
If you want to connect to your home IP through the tunnel, you must specify 'inside access management:
http://www.Cisco.com/en/us/docs/security/ASA/asa82/configuration/guide/a...
Best regards, Karsten
Sent by Cisco Support technique iPad App
Tags: Cisco Security
Similar Questions
-
If I buy 1 annual contract with monthly payment app am I then linked throughout the year, or can I cancel after 3 months and then not pay the rest of the year?
I found the answer myself via chat. the answer is Yes, you can cancel, but you must pay 50% of the remaining months of the annual contract
-
I tried to download the After effects program and its not downloading
I tried to download the After effects program and its not downloading
first try to connect and then back to your desktop cc application. If you are unable to install your programs after doing this, stilll follow solution 2 here, CC Office lists the applications as "up to date" when it is not installed.
failure to allow you to download, uninstall cc apps, clean and reinstall by, use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6
-
E2500 cannot connect to internet after re-configuration wifi
After the initial Setup, if I go to advanced configuration and trying to modify the wireless router drops it's internet connection (looks like it does not acquire DHCP) and is incapable of is re - connect until I have reset to the default values and use the CD again.
I confirmed that change the SSID or password it breaks, but I don't know about the other parameters.
The firmware update seemed to kill it, also, but at that point, I gave up and am about to put the thing in the trash. My router linksys 15 years ago, works very well and doesn't have this problem.
Hi there, rick2019. We are sorry for the inconvenience this is for you. Give us a chance to help you with this question and help solve you this challenge. Do you feel the abandonment of the Wired internet connection and wireless? Have you met the challenge even after the firmware upgrade yet?
-
Hello
We have ASA 5520 acting as the VPN server and the router Cisco 1941 as EZVPN client. These last days of customer is not able to establish the vpn connection. 1941 continuous router generates the below the log messages
---------------
001569: Jul 22 ABC 12:19:05.883: CRYPTO-4-EZVPN_SA_LIMIT %: EZVPN (VPNGROUP) Split tunnel attributes (51) greater than max allowed split attributes (50)
001574: Jul 22 ABC 12:19:07.835: % CRYPTO-6-EZVPN_CONNECTION_DOWN: user (customer) = vpn_user group = VPNGROUP Client_public_addr =
Server_public_addr = 004943: Jul 22 ABC 11:32:42.247: % IP_VFR-4-FRAG_TABLE_OVERFLOW: Dialer1: the table fragment has reached its maximum 16
---------------
Future prospects for aid and the suggestion of experts
Thank you
Israr Ahmad
Yes, your split tunnel access-list is too big, and he has reached the maximum number of lines.
Try to reduce the number of ACL for your tunnel of split ACL maybe combining the subnets if possible.
-
Cannot console the device after AAA configuration
I've implemented ISE in my environment and from the configuration of my devices to authenticate on the server I h ave not been able to connect to the devices using the connection to the Console.
Here is an excerpt of the configuration of the device.
username administrator local privilege 15 password 7 06205F334868591A1004
AAA new-model
!
!
RADIUS AAA server group ISE_Servers
auth-port 1645 10.200.1.19 Server acct-port 1646
auth-port 1645 10.200.2.19 Server acct-port 1646
!
Group AAA authentication login default local ISE_Servers
the AAA authentication enable default group, select ISE_Servers
Group default AAA authorization exec if-ISE_Servers local authenticated
AAA accounting send stop-record an authentication failure
AAA exec by default start-stop accounting ISE_Servers group
AAA login by default start-stop accounting ISE_Servers group
RADIUS-server host 10.200.1.19 auth-port 1645 acct-port 1646 borders 7 0231504919570126581E0754241411585951
RADIUS-server host 10.200.2.19 auth-port 1645 acct-port 1646 borders 7 097B1A1B0B5419151F5C0A670A272B606077
!
Line con 0
exec-timeout 0 0
password 7 1068590B 013142081917
line vty 0 4
password 7 096A1E1B1D2347111E1F
length 0
line vty 5 15
password 7 096A1E1B1D2347111E1F
!
Any help or advice would be greatly appreciated.
Thank you
ISE_Servers is a radius server group name. In fact, he applied a default method list.
Group AAA authentication login default local ISE_Servers
Jatin kone
-Does the rate of useful messages- -
Original title: error
Download Kodak and received the error message "" unable to start the program because it lacks LTID1ON.dll form your computer ""
What is - this and how to fix it?
Also now got "one or more system DLL cannot be loaded:ESAPP.dll.
Hi Nathalie criss.
1. what browser do you use?
You can try to temporarily disable antivirus software (and any other security such as anti-malware software, etc.) and firewall on the computer and try redownloading software.
Note: Make sure that you enable the antivirus software, other security and firewall after the test programs.
For more information, you can check the link foolwing:
How to solve error codes from EASYSHARE resulting from Internet downloads software?
http://support.en.kodak.com/app/answers/detail/A_ID/3569/selected/true
Hope this information is useful.
-
I have a computer dell laptop vostro 3550 with windows pro 8.1. It cannot show and join 5 GHz networks. It recognizes and connect only to networks of 2.4 ghz.
All othes devices I have at HOME, connect to 5 GHz and 2.5 ghz networks WITHOUT problem (IPAD with iOS 7.04, 5 IPHONE with iOS 7.04, IMAC with OS X V10.9.1, MAC MINI WITH WINDOWS 7 AND OS X V10.9.1, ETC.)
Reference Dell what is the problem? This is a limitation of the internal wi - fi card vostro 3550? Is this a Windows 8.1 problem?
I appreciated the HELP of the communit and Dell!
Thank you
Wilson Dias
I hope that people who have this problem in the future, you read this before you follow Ricky RockStars because he has mental health problems. After having seen his reply here and then others and it is how wildly incorrect, I did some research. I saw one of his messages on a forum from another site where he calls himself, "master of puppets" and he said he finds his answers on google. Dell isn't the only place to take responses at random to see if a stick, said. Apparently, he did that on ' yah * answers "and others, also. It is not a true expert, and instead of saying that he doesn't know, he barks just the random directions to try to solve problems or problems which can still be fixed, as it did here. He loves the power of the people who listen to him. He really has no idea what she's doing. He just googles your problem and tells you what it finds, as if he knew. The problem with is that if you have already done this, he will find the same wrong information makes you or even worse information as he did here. I saw a lot of his answers and about half are correct, 1/3 are wrong and just wasting peoples time, and the other 1/6 are harmful. Look at what happened here. He should have just said what I say below, but instead of that he had a back and forth for days because he loves control. Seriously, I don't understand how Dell allows this to happen. It is everywhere in their forums, which gives bad advice, and using people as the 'puppets' in his weird game to control the actions of others.
Here's the real answer:
Dell Vostro 3550 does not support WiFi 5 Ghz network connections. There is nothing you can do to address this problem in addition to changing the hardware (go out and buy a 5 GHz USB adapter).
-
Original title: print spooler does not - error 1053 - Windows 7
I have a HP Pavilion dv4-511 with Windows 7. 2 weeks ago I ran a Windows Update and all my printers installed have disappeared after a reboot. I did a system restore and they were all back. Yesterday, I installed an update to a software (Soonr) and it's the same thing. I clicked on the print spooler service to see if I was able to restart and got the error 1053 saying "service did not respond to demand launch or control in a timely." If I click on "Add a printer" in the menu devices and printers, I get the following message: "Windows can't open add printer." The local print spooler service is not running. Please restart the spooler or restart the machine. "I rebooted the computer and the same thing continues to happen. I did a system restore and the printers are all back. It seems that every time there is a change to any software, it creates this problem. Help, please! Thank you.
Hello
Welcome to the Microsoft community!
When the updates are installed, the printers will be lost and when you try to start the print spooler service, you get the service saying error 1053 has failed to demand launch or timely control.
The problem may occur if some system files are corrupted or because of malicious content.
I suggest you follow the steps mentioned below:
Method 1: File system (CFS) Scan Checker
SFC scan will find all missing or incorrect system files and repairs them.
See the site:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Method 2: Scan the computer to remove all possible malicious content
See the site:
Microsoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx .
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
I hope this helps. If the problem persists, let know us and we would be happy to help you.
-
The computers on the network: not configured and do not want
If I turn off network discovery in the advanced settings of the network and sharing in my two computers Center, a 10 Windows and other Windows 8, will then not recognize each other while at home, both connected to my wireless phone?
I just did a factory on a single computer restore and - this has never happened before-, I noticed that what I was adding or editing in a computer occurred then the other, I don't want to. For example, I changed my wallpaper in one and the other was automatically the same background a few minutes later.
I want to be able to use the two computers in my house, but keep them separate. I guess the power off network discovery will do the job, but am not sure. I guess I DO NOT want TO or should not, unplug the network in general or the network driver. I don't even know the difference between the two.
I also want my wireless adapter to continue working and I read that disconnection from the network can change something in the adapter.
Finally, I do not understand why the computers now appear automatically connected, because I did restore factory before and this has never happened.
Hello Daffy,
Thanks for posting your query in Microsoft Community. I will certainly help you with the problem you are experiencing.
If you disable the network discovery, you will not be able to share files and folders between devices on the same network.
The problem you are experiencing is due to the synchronization between devices with your Microsoft Account. When the synchronization is turned on, Windows keeps track of the settings that you care and sets them for you on all your devices Windows 10.
You can choose to synchronize/UN-sync things such as web browser settings, passwords and the color themes.
So, I suggest you disable synchronization of Windows settings.
Reference: "choose what sync settings".
Sync between multiple PC settings with OneDrive
Hope this information is useful. Keep us informed of the results. We will be happy to help you.
-
My starter windows repeat failure of configuration and does not light
I have install a temporary windows 7 when it ended I can't use my windows starter 7. How can I make it work again
If you need to reinstall Windows 7 Starter, see the following:
For Windows 7 Starter, please follow the instructions here.
-
Cannot connect to internet after connecting to VPN Cisco ASA 5505
Hi all
I am an engineer of network, but haven't had any Experinece in the firewall for the moment, I'm under pressure to take care of a ASA 5505 were all VPN and incoming and out of bounds have been set up, recently I've had a few changes and re made the change, but unfortunately, he took some configurations that are ment for VPN now I am facing a problem,
VPN connection, but impossible to navigate on the internet is my problem, I tried inheriting tunneli Split, but I coudnt get through it seems, I did something in a bad way, I use here for most ASDM,.
I paste the Configuration for the investigation, although he's trying to help me.
ASA Version 8.0(4)16 ! hostname yantraind domain-name yantra.intra enable password vD1.re9JLbigXJxz encrypted passwd hVjSWvtgvNN21M./ encrypted names ! interface Vlan2 nameif outside security-level 0 ip address Outside_Interface 255.255.255.240 ospf cost 10 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 switchport access vlan 2 ! interface Ethernet0/6 switchport access vlan 2 shutdown ! interface Ethernet0/7 switchport access vlan 2 shutdown ! boot system disk0:/asa804-16-k8.bin boot system disk0:/asa724-k8.bin ftp mode passive clock timezone GMT 0 dns domain-lookup inside dns domain-lookup outside dns server-group DefaultDNS name-server 192.168.0.106 name-server 192.168.0.10 domain-name yantra.intra same-security-traffic permit intra-interface object-group service Email_In tcp port-object eq https port-object eq pop3 port-object eq smtp object-group service DM_INLINE_TCP_2 tcp port-object eq ftp port-object eq ftp-data port-object eq www object-group service RDP tcp port-object eq 3389 object-group service DM_INLINE_SERVICE_1 service-object icmp service-object icmp traceroute object-group protocol TCPUDP protocol-object udp protocol-object tcp object-group service voip udp port-object eq domain object-group service DM_INLINE_TCP_1 tcp port-object eq ftp port-object eq ftp-data access-list outside_access_in extended permit tcp any host object-group Email_In access-list outside_access_in extended permit tcp any host FTP_Server_Ext object-group DM_INLINE_TCP_1 access-list outside_access_in extended permit icmp any any echo-reply access-list outside_access_in extended permit tcp any host ForSLT eq www access-list outside_access_in extended permit tcp any host Search object-group DM_INLINE_TCP_2 access-list outside_access_in extended permit tcp any host IMIPublic eq www access-list outside_access_in extended permit tcp any host eq www access-list outside_access_in extended permit tcp any host SLT_New_Public eq www access-list outside_access_in extended permit object-group TCPUDP any host 202.133.48.68 eq www access-list rvpn_stunnel standard permit 192.168.0.0 255.255.255.0 access-list rvpn_stunnel standard permit 192.168.1.0 255.255.255.0 access-list nat0 extended permit ip 192.168.0.0 255.255.255.0 192.168.100.0 255.255.255.0 access-list nat0 extended permit ip 192.168.0.0 255.255.255.0 192.168.1.0 255.255.255.0 access-list nat0 extended permit ip 192.168.100.0 255.255.255.0 192.168.1.0 255.255.255.0 access-list nat0 extended permit ip 192.168.0.0 255.255.255.0 COLO 255.255.255.0 access-list nat0 extended permit ip host IT_DIRECT 192.168.0.0 255.255.255.0 access-list inside_access_in extended permit object-group DM_INLINE_SERVICE_1 any any access-list inside_access_in extended permit ip any any access-list inside_access_in extended permit ip 192.168.0.0 255.255.255.0 192.168.1.0 255.255.255.0 access-list inside_access_in extended permit ip 192.168.0.0 255.255.255.0 202.133.48.64 255.255.255.240 access-list inside_access_in extended permit ip 192.168.100.0 255.255.255.0 192.168.1.0 255.255.255.0 access-list inside_access_in extended deny object-group TCPUDP host 192.168.0.252 202.133.48.64 255.255.255.240 access-list inside_access_in extended permit ip 192.168.0.0 255.255.255.0 COLO 255.255.255.0 access-list outside_1_cryptomap extended permit ip 192.168.0.0 255.255.255.0 192.168.1.0 255.255.255.0 access-list outside_1_cryptomap extended permit ip 192.168.100.0 255.255.255.0 192.168.1.0 255.255.255.0 pager lines 24 logging enable logging timestamp logging console debugging logging buffered debugging logging trap debugging logging history emergencies logging asdm debugging logging host inside 192.168.0.187 logging permit-hostdown logging class ip buffered emergencies mtu inside 1500 mtu outside 1500 ip local pool rvpn-ip 192.168.100.1-192.168.100.25 mask 255.255.255.0 ip verify reverse-path interface inside ip verify reverse-path interface outside no failover icmp unreachable rate-limit 1 burst-size 1 icmp permit any traceroute outside asdm image disk0:/asdm-61551.bin no asdm history enable arp timeout 14400 nat-control global (outside) 1 interface nat (inside) 0 access-list nat0 nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) netmask 255.255.255.255 dns static (inside,outside) FTP_Server_Ext FTP_Server_Int netmask 255.255.255.255 dns static (inside,outside) ForSLT SLT_New netmask 255.255.255.255 static (inside,outside) Search LocalSearch netmask 255.255.255.255 static (inside,outside) IMIPublic IMI netmask 255.255.255.255 static (inside,outside) SLT_New_Public SLT_Local netmask 255.255.255.255 static (inside,outside) netmask 255.255.255.255 access-group inside_access_in in interface inside access-group outside_access_in in interface outside route outside 0.0.0.0 0.0.0.0 202.133.48.65 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authentication http console LOCAL aaa authentication ssh console LOCAL http server enable http 192.168.0.0 255.255.255.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map rvpn_map 65535 set pfs crypto dynamic-map rvpn_map 65535 set transform-set ESP-3DES-SHA crypto map outside_map 1 match address outside_1_cryptomap crypto map outside_map 1 set pfs crypto map outside_map 1 set peer crypto map outside_map 1 set transform-set ESP-3DES-SHA crypto map outside_map 2 match address outside_cryptomap crypto map outside_map 2 set pfs crypto map outside_map 2 set peer crypto map outside_map 2 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic rvpn_map crypto map outside_map interface outside crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=yantraind proxy-ldc-issuer crl configure crypto ca server shutdown crypto ca certificate chain ASDM_TrustPoint0 certificate f8684749 30820252 308201bb a0030201 020204f8 68474930 0d06092a 864886f7 0d010104 0500303b 31123010 06035504 03130979 616e7472 61696e64 31253023 06092a86 4886f70d 01090216 1679616e 74726169 6e642e79 616e7472 612e696e 74726130 1e170d30 38313231 36303833 3831365a 170d3138 31323134 30383338 31365a30 3b311230 10060355 04031309 79616e74 7261696e 64312530 2306092a 864886f7 0d010902 16167961 6e747261 696e642e 79616e74 72612e69 6e747261 30819f30 0d06092a 864886f7 0d010101 05000381 8d003081 89028181 00f6d1d0 d536624d de9e4a2e 215a3986 98087e65 be9f6c0f b8f6dc3e 151c5603 21afdebe 85b2917b 297b1d1c b3abf5c6 628afbbe dda1ca27 01282aff 6514f62f 2965c87c 8aab0273 ab59dac6 aa9f549b 846d93fd 44c7f84f b29545bb d0db8bbb 060dfbbf 592a15e3 3db126be 541003c4 38754847 0b472e62 d092fec2 d556f9e3 09020301 0001a363 3061300f 0603551d 130101ff 04053003 0101ff30 0e060355 1d0f0101 ff040403 02018630 1f060355 1d230418 30168014 9f66b685 2ebf0d5a 97a684ba 9a9518ca a8ed637e 301d0603 551d0e04 1604149f 66b6852e bf0d5a97 a684ba9a 9518caa8 ed637e30 0d06092a 864886f7 0d010104 05000381 81003b49 2a7ee503 79b47792 6ce90453 70cf200e 943eccd7 deab53e0 2348d566 fe6aa8e0 302b922c 12df802d 398674f3 b1bc55f2 fe2646d5 c59689c2 c6693b0f 14081661 bafb233b 1b296708 fc2b6cbb ba1a005e 37073d72 4156b582 4521e673 ba6c7f7d 2d6941c4 9e076c39 73de21b9 712f69ed 7aab4bda 365d7eb3 39c05d27 e2dd quit crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet timeout 5 ssh 192.168.0.0 255.255.255.0 inside ssh 0.0.0.0 0.0.0.0 outside ssh timeout 15 ssh version 2 console timeout 0 dhcpd address 192.168.0.126-192.168.0.150 inside dhcpd dns 192.168.0.106 192.168.0.10 interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics port threat-detection statistics protocol threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 webvpn group-policy DfltGrpPolicy attributes dns-server value 192.168.0.106 vpn-tunnel-protocol IPSec l2tp-ipsec svc split-dns value 192.168.0.106 group-policy rvpn internal group-policy rvpn attributes dns-server value 192.168.0.106 vpn-tunnel-protocol IPSec webvpn split-tunnel-policy tunnelspecified split-tunnel-network-list value rvpn_stunnel default-domain value yantra.intra username rreddy password 6p4HjBmf02hqbnrL encrypted privilege 15 username bsai password 41f5/8EINw6VQ5Os encrypted username bsai attributes service-type remote-access username Telnet password U.eMKTkIYZQA83Al encrypted privilege 15 username prashantt password BdrzfvDcOsnHBIdz encrypted username prashantt attributes service-type remote-access username m.shiva password p5YdC3kTJcnceaT/ encrypted username m.shiva attributes service-type remote-access username Senthil password qKYIiJ9NmC8NYvCA encrypted username Senthil attributes service-type remote-access username agupta password p3slrWEH1ye5/P2u encrypted username agupta attributes service-type remote-access username Yogesh password uQ3pfHI2wLvg8B8. encrypted username Yogesh attributes service-type remote-access username phanik password inZN0zXToeeR9bx. encrypted username phanik attributes service-type remote-access username murali password Ckpxwzhdj5RRu2tF encrypted privilege 15 username mgopi password stAEoJodb2CfgruZ encrypted privilege 15 username bill password Z1KSXIEPQkLN3OdQ encrypted username bill attributes service-type remote-access username Shantala password aCvfO5/PcsZc3Z5S encrypted username Shantala attributes service-type remote-access username maheshm password Fry56.leIsT9VHsv encrypted username maheshm attributes service-type remote-access username dhanj password zotUI9D6WWrMAh8T encrypted username dhanj attributes service-type remote-access username npatel password vOfMuOZg0vSkICyF encrypted username npatel attributes service-type remote-access username bmandakini password Y5UZuahgr6vd6ccE encrypted username bmandakini attributes service-type remote-access tunnel-group rvpn type remote-access tunnel-group rvpn general-attributes address-pool rvpn-ip tunnel-group rvpn ipsec-attributes pre-shared-key * tunnel-group type ipsec-l2l tunnel-group ipsec-attributes pre-shared-key * tunnel-group type ipsec-l2l tunnel-group ipsec-attributes pre-shared-key * ! class-map global-class match default-inspection-traffic class-map inspection_default ! ! policy-map global_policy policy-map global-policy class global-class inspect esmtp inspect sip inspect pptp inspect ftp inspect ipsec-pass-thru ! service-policy global-policy global prompt hostname context Cryptochecksum:7042504fefd0d22ce4de7f6fa4da14fa : end
Thanking you in advance
Hello
If you want to have Split-tunnelin in use. One you have patterns for.
Then you will need to fix the configured "private group policy" under the "tunnel - private-group
tunnel-group private general-attributes
strategy - by default-private group
Then reconnect the VPN Client connection and try again.
After that the VPN Client connection only transmits traffic directed to the LAN on the VPN Client connection and all Internet traffic beyond the VPN connection directly to the Internet through the current connection of the users.
-Jouni
-
ASA 5505 Split Tunneling configured but still all traffic Tunneling
Hello
I installed an ASA 5505 running 8.3.2 and Cisco AnyConnect Client 2.5.2017.
There are the DefaultRAGroup and a newly configured Group called SplitTunnelNets.
I have 1 internal subnet (192.168.223.0/24) which has a matching ACL/AS configured on the DefaultRAGroup and the custom group policy called SSLClientPolicy.
When I start the VPN with the ASA, I can indeed reach internal resources, but when I look at the routing table, I see a new default gateway route 0.0.0.0 / 0-> 192.168.25.2 (that is in the IP pool) with a metric of 2. The default route before the start of the session AnyConnect now has a higher metric, so the 192.168.25.2 next hop is a priority.
I don't see the routes in the routing table for 192.168.223.0/24 as I expect to see. In the diagnosis of AnyConnect, I see that 0.0.0.0/0 is the policy applied to the client.
Here's my setup. Please tell me if you see something that I'm missing.
ASA 8.3 Version (2)
!
host name asanames of
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.223.254 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP x.x.x.x 255.255.255.240
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
boot system Disk0: / asa832 - k8.bin
passive FTP mode
clock timezone IS - 5
clock to summer time EDT recurring
DNS lookup field inside
DNS server-group DefaultDNS
Server name 192.168.223.41
domain Labs.com
network obj_any object
subnet 0.0.0.0 0.0.0.0
vpn-client-net network object
255.255.255.0 subnet 192.168.25.0
network of the internal net object
192.168.223.0 subnet 255.255.255.0
the DM_INLINE_NETWORK_1 object-group network
internal-net network object
network-vpn-client-net object
the DM_INLINE_NETWORK_2 object-group network
internal-net network object
network-vpn-client-net object
SplitTunnelNets to access extensive ip list allow any 192.168.223.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
mask 192.168.25.1 - 192.168.25.50 255.255.255.0 IP local pool SSLClientPool
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any inside
ASDM image disk0: / asdm - 635.bin
don't allow no asdm history
ARP timeout 14400
NAT (inside, all) static source internal-net net internal static destination vpn client vpn client-Net
!
network obj_any object
NAT dynamic interface (indoor, outdoor)
Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
Labs-AAA protocol ldap LDAP-server
AAA-server Lab-LDAP (inside) host 192.168.223.41
Server-port 636
LDAP-base-dn dc = labs, dc = com
LDAP-scope subtree
LDAP-naming-attribute sAMAccountName
LDAP-login-password *.
LDAP-connection-dn [email protected] / * /
enable LDAP over ssl
microsoft server type
Enable http server
http 192.168.223.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto ca trustpoint ASDM_TrustPoint0
registration autosslvpnkeypair key pair
Configure CRL
Crypto ca trustpoint ASDM_TrustPoint1
ASDM_TrustPoint1 key pair
Configure CRL
string encryption ca ASDM_TrustPoint0 certificatesTelnet 192.168.223.0 255.255.255.0 inside
Telnet timeout 5
SSH 192.168.223.0 255.255.255.0 inside
SSH timeout 5
Console timeout 0
dhcpd outside auto_config
!a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
NTP 192.5.41.41 Server
NTP 192.5.41.40 Server
SSL-trust outside ASDM_TrustPoint1 point
WebVPN
allow outside
No anyconnect essentials
SVC disk0:/anyconnect-win-2.5.2017-k9.pkg 1 image
SVC disk0:/anyconnect-macosx-i386-3.0.0629-k9.pkg 2 image
Picture disk0:/anyconnect-linux-3.0.0629-k9.pkg 3 SVC
enable SVC
tunnel-group-list activate
internal SSLClientPolicy group strategy
attributes of Group Policy SSLClientPolicy
value of server DNS 192.168.223.41
VPN-tunnel-Protocol svc
Split-tunnel-policy tunnelspecifiedvalue of Split-tunnel-network-list SplitTunnelNets
field default value Labs
split dns value Labs.com
the address value SSLClientPool pools
WebVPN
SVC Dungeon-Installer installed
attributes of Group Policy DfltGrpPolicy
value of server DNS 192.168.223.41
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list SplitTunnelNets
coyotelabs.com value by default-field
type of remote access service
type tunnel-group SSLClientProfile remote access
attributes global-tunnel-group SSLClientProfile
CoyoteLabs-LDAP authentication-server-group
Group Policy - by default-SSLClientPolicy
tunnel-group SSLClientProfile webvpn-attributes
allow group-alias CoyoteLabs
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:95b7ff58b54e02948a14b225eec1a990
: endThe split tunnel access list must be standard access-list, not extended access list.
You must change the following:
FROM: SplitTunnelNets access-list extended ip to allow all 192.168.223.0 255.255.255.0
To: SplitTunnelNets standard access list allows 192.168.223.0 255.255.255.0You should be able to reconnect again and will be able to access the Internet after you set up the standard access-list split tunnel.
Hope that helps.
-
8.3 (1) ASA Cisco VPN Client and IP Communicator - one-way communication
Community salvation.
I have a strange problem with my setup and I'm sure it's either some type of routing (or NAT) or just missing one rule allows traffic. But I'm now at a point where I would like to ask your help.
I have a few users remote access that have the Cisco IP Communicator (CICC) application installed on their laptops. So:
The VPN with CPIC user <> ASA Firewall <> router voice <> MAC <> IP phone
The VPN works fine for all other traffic. The connection of basis for the IP Communicator works well. He get is connected to the CallManager, is shown as registered and you can even call an internal phone and also external phones. BUT: while you can hear the called party (if the phone internal) it does not work for the other direction. There is no sound from the remote/appellant.
I already understood that it is also not possible to ping from the phone VPN to the internal subnet IP phone. While the VPN user can ping any other device in the network internal, he cannot do for Cisco IP phones. But if the VPN phone calls a phone no-internal (mobile...) - it works!
My thought is that the call cannot be build up properly between the VPN phone and the internal phone.
I found similar situations with google, but they are all for the reverse: call for internal works, but not for VPN.
What do you think?
Hello
Usually ASA lists specific to the customer networks VPN Split Tunnel runs.
This would mean that there is a Split Tunnel ACL used in configurations of the SAA for this VPN connection that needs to have the missing network added to the VPN connection traffic.
-Jouni
-
Hello
I don't know what could be held, vpn users can ping to the outside and inside of the Cisco ASA interface but can not connect to servers or servers within the LAN ping.
is hell config please kindly and I would like to know what might happen.
hostname horse
domain evergreen.com
activate 2KFQnbNIdI.2KYOU encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
ins-guard
!
interface GigabitEthernet0/0
LAN description
nameif inside
security-level 100
192.168.200.1 IP address 255.255.255.0
!
interface GigabitEthernet0/1
Description CONNECTION_TO_FREEMAN
nameif outside
security-level 0
IP 196.1.1.1 255.255.255.248
!
interface GigabitEthernet0/2
Description CONNECTION_TO_TIGHTMAN
nameif backup
security-level 0
IP 197.1.1.1 255.255.255.248
!
interface GigabitEthernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
Shutdown
No nameif
no level of security
no ip address
management only
!
boot system Disk0: / asa844-1 - k8.bin
boot system Disk0: / asa707 - k8.bin
passive FTP mode
clock timezone WAT 1
DNS server-group DefaultDNS
domain green.com
network of the NETWORK_OBJ_192.168.2.0_25 object
Subnet 192.168.2.0 255.255.255.128
network of the NETWORK_OBJ_192.168.202.0_24 object
192.168.202.0 subnet 255.255.255.0
network obj_any object
subnet 0.0.0.0 0.0.0.0
the DM_INLINE_NETWORK_1 object-group network
object-network 192.168.200.0 255.255.255.0
object-network 192.168.202.0 255.255.255.0
the DM_INLINE_NETWORK_2 object-group network
object-network 192.168.200.0 255.255.255.0
object-network 192.168.202.0 255.255.255.0
access-list extended INSIDE_OUT allow ip 192.168.202.0 255.255.255.0 any
access-list extended INSIDE_OUT allow ip 192.168.200.0 255.255.255.0 any
Access extensive list permits all ip a OUTSIDE_IN
gbnlvpntunnel_splitTunnelAcl standard access list allow 192.168.200.0 255.255.255.0
standard access list gbnlvpntunnel_splitTunnelAcl allow 192.168.202.0 255.255.255.0
gbnlvpntunnell_splitTunnelAcl standard access list allow 192.168.200.0 255.255.255.0
standard access list gbnlvpntunnell_splitTunnelAcl allow 192.168.202.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
backup of MTU 1500
mask of local pool VPNPOOL 192.168.2.0 - 192.168.2.100 IP 255.255.255.0
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm-645 - 206.bin
don't allow no asdm history
ARP timeout 14400
NAT (inside, outside) static source NETWORK_OBJ_192.168.202.0_24 NETWORK_OBJ_192.168.202.0_24 NETWORK_OBJ_192.168.2.0_25 NETWORK_OBJ_192.168.2.0_25 non-proxy-arp-search of route static destination
NAT (inside, backup) static source NETWORK_OBJ_192.168.202.0_24 NETWORK_OBJ_192.168.202.0_24 NETWORK_OBJ_192.168.2.0_25 NETWORK_OBJ_192.168.2.0_25 non-proxy-arp-search of route static destination
NAT (inside, outside) static source DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 NETWORK_OBJ_192.168.2.0_25 NETWORK_OBJ_192.168.2.0_25 non-proxy-arp-search of route static destination
NAT (inside, backup) static source DM_INLINE_NETWORK_2 DM_INLINE_NETWORK_2 NETWORK_OBJ_192.168.2.0_25 NETWORK_OBJ_192.168.2.0_25 non-proxy-arp-search of route static destination
!
network obj_any object
dynamic NAT interface (inside, backup)
Access-group interface inside INSIDE_OUT
Access-group OUTSIDE_IN in interface outside
Route outside 0.0.0.0 0.0.0.0 196.1.1.2 1 track 10
Route outside 0.0.0.0 0.0.0.0 197.1.1.2 254
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
Enable http server
http 192.168.200.0 255.255.255.0 inside
http 192.168.202.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
monitor SLA 100
type echo protocol ipIcmpEcho 212.58.244.71 interface outside
Timeout 3000
frequency 5
monitor als 100 calendar life never start-time now
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
backup_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
backup of crypto backup_map interface card
Crypto ikev1 allow outside
Crypto ikev1 enable backup
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
!
track 10 rtr 100 accessibility
Telnet 192.168.200.0 255.255.255.0 inside
Telnet 192.168.202.0 255.255.255.0 inside
Telnet timeout 5
SSH 192.168.202.0 255.255.255.0 inside
SSH 192.168.200.0 255.255.255.0 inside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 15
SSH group dh-Group1-sha1 key exchange
Console timeout 0
management-access inside
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal group vpntunnel strategy
Group vpntunnel policy attributes
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list vpntunnel_splitTunnelAcl
field default value green.com
internal vpntunnell group policy
attributes of the strategy of group vpntunnell
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list gbnlvpntunnell_splitTunnelAcl
field default value green.com
Green user name encrypted BoEFKkDtbnX5Uy1Q privilege 15 password
attributes of user name THE
VPN-group-policy gbnlvpn
tunnel-group vpntunnel type remote access
tunnel-group vpntunnel General attributes
address VPNPOOL pool
strategy-group-by default vpntunnel
tunnel-group vpntunnel ipsec-attributes
IKEv1 pre-shared-key *.
type tunnel-group vpntunnell remote access
tunnel-group vpntunnell General-attributes
address VPNPOOL2 pool
Group Policy - by default-vpntunnell
vpntunnell group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns migrated_dns_map_1
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the migrated_dns_map_1 dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:7c1b1373bf2e2c56289b51b8dccaa565
Hello
1 - Please run these commands:
"crypto isakmp nat-traversal 30.
"crypto than dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 Road opposite value.
The main issue here is that you have two roads floating and outside it has a better than backup metric, that's why I added the command 'reverse-road '.
Please let me know.
Thank you.
Maybe you are looking for
-
I lost the option to save pictures that are emailed to my Ipad mini
When I open the contents of my hotmail on my IPad mini, I have now the possibility to record the content of the photo
-
Suddenly, my Facebook page is miniature, may not even read.
I have used the 'aid' change features & FF going just to several tabs. In addition, at the outset, I have windows popping up everywhere in the screen. Thank you!!
-
Migration of files between the profiles of IMAP
I created a new profile, when I had to change your web host provider. I can't my old messages on the original profile and in the news. Both are IMAP, and I followed the instructions, downloaded Add-ons, etc., recommended in the Ezine of Mozilla knowl
-
H8-1214: upgrade of the H8-1214 cpu cooler
I'm trying to upgrade the processor 6100 fx to fx-8150, but I'm having a devil of a time finding a CPU cooler that fits the card mother angelica. what most people don't understand, is that the card mother angelica uses am3 + socket mount Intel cpu co
-
Why when I backup after selection keep only last system only the old image image is maintained?