Cannot start a process managed after the attempt limit maximum

Similar Questions

• Cannot start my MacBook Pro after the intrusions on the apple Web site to stop pop up ads. S

  Cannot start for hours

  Try SMC and NVRAM resets:

  https://support.Apple.com/en-us/HT201295

  https://support.Apple.com/en-us/HT204063

  Try a safe boot:

  https://support.Apple.com/en-us/HT201262

  It may be helpful if you indicated the EXACT MBP model/year you have.

  Ciao.

• Cannot start installation of recovery after the replacement of HDD - Satellite A10

  I have a satellite a10, I bought a new hard drive on ebay brand new in the package and it's a 40 GB with the Toshiba name thereon. I took the old 30 GB and put in the drive.

  Put in the original recovery CD, I got with the laptop and get the screen: "WEelcome to the toshiba recovery utility" etc, etc. HIT F1 ok but nothing happens,
  Any thoughts?

  Recovery at startup press 1 procedure and not F1 for installation in Standard mode.

• Programs can not be started, or no response after the computer was not awake mode "Eve"

  Dear Sir.

  My lap top is under the VISTA system. Now the problem is that all programs can not be started or no response after the computer was not awake mode "Eve". I have to restart the computer to recover the computer to normal state.

  Please please let me have your advice to return to my email address: * email address is removed from the privacy *.

  Thank you very much!

  Eric

  Hi Eric,.

  You can follow these steps:

  Step 1: perform a clean boot to verify if an application or service is causing the problem.

  See this article for more information on the clean boot:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
   http://support.Microsoft.com/kb/929135

  Steps to perform a clean boot:
  a. click the ORB start on your desktop
  b. type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. in the general tab, click Selective startup.
  d. under Selective startup, clear the check box load startup items.
  e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  f. click OK.
  g. When prompted, click on restart.

  NOTE: Please check that you start the computer in normal mode after a repair. Follow step 7 article.

  Step 2: Configure the power settings for keyboard, mouse, and other devices.

  a. Click Start, click Control Panel, hardware and sound, and then click keyboard.
  b. click on the Hardware tab, and then click the properties button.
  c. click Change settings.
  d. click the power management tab and verify that the allow this device to wake the computer is selected.
  e. If "Allow this device to wake the computer" was not selected, select it and click OK.
  Follow the same steps for the mouse as well.

  If the problem persists, disconnect all non-essential devices (printers, scanners, USB drives). Restart the computer with only the original mouse, monitor, and
  connected keyboard. If this solves the problem of sleep/wake, one of the devices was causing the problem. Replace a device at a time and test to see if the
  problem occurs again. Continue adding devices and testing until you find the device that causes the problem.

  Refer to this article for additional troubleshooting steps.

  
  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista:
  http://support.Microsoft.com/kb/950686

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Photosmart C6280: cannot print on C6280 wireless after the upgrade to Windows 10

  Cannot print on C6280 wireless after the upgrade to Windows 10. Have removed the device, but try to re install the printer when is not found. Can print if I connect USB. Tried to reload the driver using HP Support software help, but when he arrives at the end of the download fails.

  Hi @Ron9871,

  Welcome to the Forums of HP Support!

  I see that you are unable to get your printer HP Photosmart C6280 wireless printing. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I would like to try the steps in this guide, "offline" Status Message printer (Windows 10).

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  • Print a Page of Network Configuration menu of the printer front panel. Note: the IPV4 IP.
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.

  Please restart the router, the printer and the computer in this sequence.

  If you're still having problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  You can try to change your WSD printer port by a Standard TCP/IP port.

  To do this, you will need your current IP address printers.  The Network Setup page shows the parameters of network for the product. To print this page; Press the button of network () on the control panel of the product.

   

• Cannot update Windows XP Pro after the reinstallation of the Message, the website has encountered a problem and cannot display the page you are trying to view. There is no error code displayed

  Cannot update Windows XP Pro after the reinstallation of the Message, the website has encountered a problem and cannot display the page you are trying to view. The error number is 0x8024400A.

  Should I turn off my Anti virus software is what could be stopping my updates? some sites would sugest that I use Kaspersky 2012, if that's the case, then why do all my other programs that are installed to date OK?

  Hello

  Check your level of service current pack...

  • Hold down the Windows (between Ctrl and Alt) key and press Pause break
  • Examine what is listed in the system: section

  If there is no service pack designated first level you must download SP2 from...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=28

  .. .and then run the downloaded program to install SP2.

  Once you have done this, or if you were already in service pack 1, 1a or 2, then install SP3 by downloading and running from...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24

  For both of the above, you can ignore the text that says it's for network installations and also ignore the text advising windows/microsoft update if a single update of a PC.

  So try and get up-to-date with the Windows updates.

  Tricky

• I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  Hello, Pichon,

  If Windows Vista application unexpected activation

  On rare occasions, you may be prompted to activate Windows Vista on a computer that did not previously require Windows Vista activation or has already been activated successfully. For example, this may occur on a computer on which Windows Vista was preinstalled by an OEM installation or Volume licensing and are major hardware changes occurred, such as upgrading the hard disk and memory at the same time.

  If you are prompted to reactivate Windows Vista, you can do this by using the Windows Activation Wizard to:

  1. Click Start, and then click computer.
  2. Click System Properties on the toolbar, and then click click here to activate Windows now in the Windows activation area. If you are prompted for an administrator password or a confirmation, type the password, or click continue.
  3. Select the Windows Vista activation method that you want, and then follow the instructions.

  To avoid this problem in the future, obtain the latest service pack for your version of Windows Vista, either through automatic updates or direct download.

  To update to Windows Vista and prevent this activation problem does not happen:

  1. Click Start, click all programs, and then click Windows Update.
  2. Click find updates.
  3. As soon as Windows Vista found the updates, click the install updates button.

  How to activate Windows Vista

  http://support.Microsoft.com/kb/940315

  Activation fails when you try to activate Windows Vista, Windows 7, Windows Server 2008 or Windows Server 2008 R2 on the Internet

  http://support.Microsoft.com/kb/921471

• The windows 10 ISO file will still work to upgrade my computer to Windows 7 after the date limit to install the free version?

  Original title: upgrade Windows 10

  I made an iso file for windows 10. I am waiting to upgrade until all the bugs are being developed. My question is: will the iso file of windows 10 still work to upgrade my computer to windows 7 after the date limit to install the free version?

  The ISO will work after the date limit, but you can buy Windows 10 after the date limit, if you don't improve and activate it before that date.

  Windows 10 is delivered as a service:

  Windows July 10 release - build 10240

  Windows Update 10 November - build 10586 (with many updates depuis.13,.29,. 36)

  If you want to take advantage of the free offer, you must do so before July 29, 2016.

  If you the newer versions are released before then, you can always download and install when it becomes available.

  You could also install it now then download updates via Windows Update as soon as they are available.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Cannot start Lightroom 6 (standalone) after installation - stuck at the start with scope screen not responding error

  Hi all

  As stated above, I am unable to start Lightroom 6 (standalone) after installation. I am able to launch, but I'm stuck on the boot screen (lightroom logo 6) with bezel does not no error. Would be grateful for any help, thank you very much!

  Just a suite, I use Windows 7 (x 64). I talk with the cat from adobe and I was told to create a new Administrator windows account and reinstall LR by using this new account.

  It worked for me, I am able to successfully access LR 6 using the newly created administrator account. I tried to follow up with another request - I have what patches can implement to my current user account so that I can access LR 6 using that account (and not the new windows user account). Unfortunately, I was told that cat Adobe does not support LR 6 and I am directed to ask my questions here.

  Thanks a lot again!

• RUNDLL - error loading c:\windows\wrypap.dll - specified module cannot be found, this happens after the windows xp registry.

  RUNDLL - error loading c:\windows\wrypap.dll - specified module cannot be found, this happens after windows xp registry

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.

  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.

  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.

  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Cannot start. Don't get the error "no boot sector on hard drive internal.

  Original title: computer does not load.

  After that I turned on my laptop (windows XP) I get a black screen saying "no boot sector on hard drive internal" "no devices bootable-strike F1 to retry boot, F2 for installation; After pressing F1 displays the same screen and if I press F2 Setup screen appears and then I'm lost. Help please!

  Hi Jose_luna47,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?

  Method 1

  I suggest that you perform chkdsk analysis on the computer to check and fix the errors on the hard drive by using the recovery console.

  Chkdsk

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/chkdsk.mspx?mfr=true

  How to install and use the Recovery Console in Windows XP

  http://support.Microsoft.com/kb/307654

  Description of the Windows XP Recovery Console for advanced users

  http://support.Microsoft.com/kb/314058

  Method 2

  If the previous step fails, then you will need to check the settings in the basic input/output system (BIOS) and you need to contact the computer manufacturer for help with basic input/output system (BIOS).

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Smartphones from blackBerry Bold 9900 unusable after the attempt to update software

  Yesteraday I started operating system up-to-date software (from 7.1.8xx to 7.1.2xxx I think).

  After a while, the screen showed "App Error 602" and "Reset".

  Do a reset via the abovementioned display or pop battery option simply returns the device to the same State.

  I tried to download BlackBerry Desktop Software (710_b42), seemed to acknowledge a problem initially and offered to reload the software (at the cost of losing my apps, etc.).  I tried and the procedure failed with:

  "There was an error in your software update"
  "A connection to the device could not be established.  Please ensure that the device is properly connected to the docking station or the USB cable, and the cradle or the USB cable is properly plugged into your computer.  Also to ensure that the device made of start-up operations.  Run the Application loader wizard again. »

  The physical connection is obviously not the problem since Desktop software has been able to detect that it is a 9900 and offered also to reload.

  Assistance would be most appreciated.

  I finally got o/s to reload.  I still don't know why it worked on the third attempt, but not before, but I'm reactivated and now functional.

• No audio (this device cannot start. Code 10) on the D630

  Hello

  I have Windows XP with SP2. Fresh installation, the laptop is new and I have problems

  with my audio device (this device cannot start. (Code 10). From the BIOS, I have after I have Sigmatel 9205

  audio device.

  I have updated the bios to A07, chipset, and later installed audio driver of dell does site already whith no results.

  Suggest what I need to do more?

  10 X,

  ADI

  
  

• Restart ColdFusion 11 Instances starts does not correctly after the server

  Hello, we have after the situation and can't seem to find a fix or a workaround for it. Could you help her?

  On all 4 of our Windows Server 2012 R2 servers running on machines with 8 vcpu hearts vitrual each, we have 10 instances running ColdFusion 11 update 6, instances are the same on all servers of 4, 2 servers are used for testing/qa and 2 for production. On all these servers, after restart servers sometimes starts correctly and need to be restarted manually to start working. It seems that, on average, at any time, instances of 2 to 4 starts not and those who are not the same bodies every time. We look at the log files and we believe that we found that the issue is, but not sure how to get around it, or fix it. When proceedings begin, the following error appears in the log files of the bodies that will not start correctly (see the bottom of this post for the actual journal entries):

  13 October 2015 07:52:25 warn org.eclipse.jetty.util.log.JavaUtilLog

  {WARNING: ServerConnector@69f41e78{HTTP/1.1 FAILED} {0.0.0.0:5500}: exception java.net.BindException: address already in use: bind

  As you can see in the logs below, actually startinstances, but when someone goes to CF Admin or try to do something with ColdFusion on these instances, all they see is error 500. Manually restart the instances starts correctly. I think the problem is that the ServerConnector of org.eclipse.jetty.util.log.JavaUtilLog will be started with the port 5500 instead of a random port (in the log files are you see an AVAILABLE argument is used by ColdFusion, when he calls the constructor). I suspect what happens is that when rebooting the server, all services trying to start at the same time and all try the port 5500 first to see if it is available for use. Since there are 8 processor cores, I think some cases on different cores to processors 'meaning' port 5500 is available and try to use it, but pending different instances on core cpu nested calls for actually the port and then others get an exception and cannot recover it. Those manually, restart gives them a new random number as the port 5500 is already used by a single instance.

  The question we have is: can force us ColdFusion instance use different port for this org.eclipse.jetty.util.log.JavaUtilLog of ServerConnector and if not, is there another workaround solution? We tried the underside of things so far, but not of them semm to help. Our tests included stop all instances and try to change settings on a single instance to see if it will use different port for ServerConnectorm of the org.eclipse.jetty.util.log.JavaUtilLog after starting, but he always tries to claim the first 5500 port:

  • Tried to change the jvm for the below arguments. We tried all those who, because we don't know yet which is correct, various documents we found online did not say specifically, this can be done with ColdFusion servers and we are not very familiar with works of the pier or what work is in ColdFusion server. Any of these help to our question:
    -Djetty.http.port = 20003
    -Dorg.eclipse.jetty.http.port = 20003
    -Dorg.eclipse.jetty.server.server.port = 20003
    -Dorg.eclipse.jetty.Server.port = 20003
  • In addition, tried to change the jetty.xml file in the D:\CF11\cfusion\jetty\etc folder (it exists only in the instance main cfusion but other instances), port of the line 139, changed it to 0. There is either no make the difference:
    < name = 'port' > < property name = "jetty.port" default = "0" / > < / Set > "

  This log file is among bodies having a problem during the last reboot of the server:

  13 October 2015 init org.apache.catalina.core.AprLifecycleListener 07:52:02
  NEWS: APR charged base library Apache Tomcat Native 1.1.33 using APR version 1.5.1.
  13 October 2015 init org.apache.catalina.core.AprLifecycleListener 07:52:02
  INFO: Capacity APR: IPv6 [true], [true] sendfile, accept the [false] filters, random [true].
  13 October 2015 07:52:04 org.apache.catalina.core.AprLifecycleListener initializeSSL
  INFO: Initialized correctly OpenSSL (OpenSSL 1.0.1m March 19, 2015)
  13 October 2015 init org.apache.coyote.AbstractProtocol 07:52:04
  INFO: Initializing ProtocolHandler ['http-Apr-8605']
  13 October 2015 init org.apache.coyote.AbstractProtocol 07:52:04
  INFO: Initializing ProtocolHandler ["ajp-Apr-8005"]
  13 October 2015 07:52:04 org.apache.catalina.core.StandardService startInternal
  INFO: Starting service Catalina
  13 October 2015 07:52:04 org.apache.catalina.core.StandardEngine startInternal
  INFO: Starting the Servlet engine: Apache Tomcat/7.0.54
  Journal of the org.apache.catalina.core.ApplicationContext 13 October 2015 07:52:14
  INFO: ColdFusionStartUpServlet: ColdFusion: from application services
  Journal of the org.apache.catalina.core.ApplicationContext 13 October 2015 07:52:14
  INFO: ColdFusionStartUpServlet: ColdFusion: version VM = 25, 60 - b23
  13 October 2015 07:52:25 org.eclipse.jetty.util.log.JavaUtilLog info
  INFO: Pier - 9.0.7.v20131107
  13 October 2015 07:52:25 org.eclipse.jetty.util.log.JavaUtilLog info
  {INFO: started o.e.j.s.ServletContextHandler@3c75e648{/,null,AVAILABLE}
  13 October 2015 07:52:25 warn org.eclipse.jetty.util.log.JavaUtilLog
  {WARNING: ServerConnector@69f41e78{HTTP/1.1 FAILED} {0.0.0.0:5500}: exception java.net.BindException: address already in use: bind
  exception java.net.BindException: address already in use: bind
  at sun.nio.ch.Net.bind0 (Native Method)
  at sun.nio.ch.Net.bind(Net.java:433)
  at sun.nio.ch.Net.bind(Net.java:425)
  at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:223)
  at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:74)
  at org.eclipse.jetty.server.ServerConnector.open(ServerConnector.java:264)
  at org.eclipse.jetty.server.AbstractNetworkConnector.doStart (AbstractNetworkConnector.java:8 0)
  at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:69)
  at org.eclipse.jetty.server.Server.doStart(Server.java:303)
  at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:69)
  at coldfusion.monitor.jetty.server.MonitoringServer.startServer(MonitoringServer.java:109)
  at coldfusion.monitor.MonitoringServiceImpl.startJettyServer(MonitoringServiceImpl.java:196)
  at coldfusion.monitor.MonitoringServiceImpl.start(MonitoringServiceImpl.java:149)
  at coldfusion.server.CFService.setupMonitoringService(CFService.java:486)
  at coldfusion.server.CFService.start(CFService.java:699)
  at coldfusion.server.j2ee.CFStartUpServlet.startCFService(CFStartUpServlet.java:553)
  at coldfusion.server.j2ee.CFStartUpServlet.init(CFStartUpServlet.java:505)
  at javax.servlet.GenericServlet.init(GenericServlet.java:158)
  at coldfusion.bootstrap.ClassloaderHelper.initServletClass(ClassloaderHelper.java:121)
  at coldfusion.bootstrap.BootstrapServlet.init(BootstrapServlet.java:59)
  at org.apache.catalina.core.StandardWrapper.initServlet(StandardWrapper.java:1284)
  at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1197)
  at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:1087)
  at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:5210)
  at org.apache.catalina.core.StandardContext.startInternal(StandardContext.java:5493)
  at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:150)
  to org.apache.catalina.core.ContainerBase$ StartChild.call (ContainerBase.java:1559)
  to org.apache.catalina.core.ContainerBase$ StartChild.call (ContainerBase.java:1549)
  at java.util.concurrent.FutureTask.run(FutureTask.java:266)
  at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:617)
  at java.lang.Thread.run(Thread.java:745)

  13 October 2015 07:52:25 warn org.eclipse.jetty.util.log.JavaUtilLog
  WARNING: org.eclipse.jetty.server.Server@340cadfc FAILED: exception java.net.BindException: address already in use: bind
  exception java.net.BindException: address already in use: bind
  at sun.nio.ch.Net.bind0 (Native Method)
  at sun.nio.ch.Net.bind(Net.java:433)
  at sun.nio.ch.Net.bind(Net.java:425)
  at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:223)
  at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:74)
  at org.eclipse.jetty.server.ServerConnector.open(ServerConnector.java:264)
  at org.eclipse.jetty.server.AbstractNetworkConnector.doStart (AbstractNetworkConnector.java:8 0)
  at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:69)
  at org.eclipse.jetty.server.Server.doStart(Server.java:303)
  at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:69)
  at coldfusion.monitor.jetty.server.MonitoringServer.startServer(MonitoringServer.java:109)
  at coldfusion.monitor.MonitoringServiceImpl.startJettyServer(MonitoringServiceImpl.java:196)
  at coldfusion.monitor.MonitoringServiceImpl.start(MonitoringServiceImpl.java:149)
  at coldfusion.server.CFService.setupMonitoringService(CFService.java:486)
  at coldfusion.server.CFService.start(CFService.java:699)
  at coldfusion.server.j2ee.CFStartUpServlet.startCFService(CFStartUpServlet.java:553)
  at coldfusion.server.j2ee.CFStartUpServlet.init(CFStartUpServlet.java:505)
  at javax.servlet.GenericServlet.init(GenericServlet.java:158)
  at coldfusion.bootstrap.ClassloaderHelper.initServletClass(ClassloaderHelper.java:121)
  at coldfusion.bootstrap.BootstrapServlet.init(BootstrapServlet.java:59)
  at org.apache.catalina.core.StandardWrapper.initServlet(StandardWrapper.java:1284)
  at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1197)
  at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:1087)
  at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:5210)
  at org.apache.catalina.core.StandardContext.startInternal(StandardContext.java:5493)
  at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:150)
  to org.apache.catalina.core.ContainerBase$ StartChild.call (ContainerBase.java:1559)
  to org.apache.catalina.core.ContainerBase$ StartChild.call (ContainerBase.java:1549)
  at java.util.concurrent.FutureTask.run(FutureTask.java:266)
  at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:617)
  at java.lang.Thread.run(Thread.java:745)

  Journal of the org.apache.catalina.core.ApplicationContext 13 October 2015 07:52:27
  INFO: CFMxmlServlet: Macromedia Flex Build: 87315.134646
  Departure from org.apache.coyote.AbstractProtocol 13 October 2015 07:52:40
  INFO: From ProtocolHandler ['http-Apr-8605']
  Departure from org.apache.coyote.AbstractProtocol 13 October 2015 07:52:40
  INFO: From ProtocolHandler ["ajp-Apr-8005"]
  13 October 2015 07:52:40 com.adobe.coldfusion.launcher.Launcher run
  Information: Starting the server to Ms 40448

  This log file is second bodies having a problem during the last reboot of the server:

  13 October 2015 init org.apache.catalina.core.AprLifecycleListener 07:52:02
  NEWS: APR charged base library Apache Tomcat Native 1.1.33 using APR version 1.5.1.
  13 October 2015 init org.apache.catalina.core.AprLifecycleListener 07:52:02
  INFO: Capacity APR: IPv6 [true], [true] sendfile, accept the [false] filters, random [true].
  13 October 2015 07:52:03 org.apache.catalina.core.AprLifecycleListener initializeSSL
  INFO: Initialized correctly OpenSSL (OpenSSL 1.0.1m March 19, 2015)
  13 October 2015 init org.apache.coyote.AbstractProtocol 07:52:04
  INFO: Initializing ProtocolHandler ['http-Apr-8607"]
  13 October 2015 init org.apache.coyote.AbstractProtocol 07:52:04
  INFO: Initializing ProtocolHandler ["ajp-Apr-8007"]
  13 October 2015 07:52:04 org.apache.catalina.core.StandardService startInternal
  INFO: Starting service Catalina
  13 October 2015 07:52:04 org.apache.catalina.core.StandardEngine startInternal
  INFO: Starting the Servlet engine: Apache Tomcat/7.0.54
  13 October 2015 07:52:09 org.apache.catalina.util.SessionIdGenerator createSecureRandom
  INFO: Creating instance of SecureRandom for the generation of using [SHA1PRNG] session ID a [141] milliseconds.
  Journal of the org.apache.catalina.core.ApplicationContext 13 October 2015 07:52:14
  INFO: ColdFusionStartUpServlet: ColdFusion: from application services
  Journal of the org.apache.catalina.core.ApplicationContext 13 October 2015 07:52:14
  INFO: ColdFusionStartUpServlet: ColdFusion: version VM = 25, 60 - b23
  13 October 2015 07:52:25 org.eclipse.jetty.util.log.JavaUtilLog info
  INFO: Pier - 9.0.7.v20131107
  13 October 2015 07:52:25 org.eclipse.jetty.util.log.JavaUtilLog info
  {INFO: started o.e.j.s.ServletContextHandler@37fad941{/,null,AVAILABLE}
  13 October 2015 07:52:25 warn org.eclipse.jetty.util.log.JavaUtilLog
  {WARNING: ServerConnector@5c29fc94{HTTP/1.1 FAILED} {0.0.0.0:5500}: exception java.net.BindException: address already in use: bind
  exception java.net.BindException: address already in use: bind
  at sun.nio.ch.Net.bind0 (Native Method)
  at sun.nio.ch.Net.bind(Net.java:433)
  at sun.nio.ch.Net.bind(Net.java:425)
  at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:223)
  at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:74)
  at org.eclipse.jetty.server.ServerConnector.open(ServerConnector.java:264)
  at org.eclipse.jetty.server.AbstractNetworkConnector.doStart (AbstractNetworkConnector.java:8 0)
  at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:69)
  at org.eclipse.jetty.server.Server.doStart(Server.java:303)
  at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:69)
  at coldfusion.monitor.jetty.server.MonitoringServer.startServer(MonitoringServer.java:109)
  at coldfusion.monitor.MonitoringServiceImpl.startJettyServer(MonitoringServiceImpl.java:196)
  at coldfusion.monitor.MonitoringServiceImpl.start(MonitoringServiceImpl.java:149)
  at coldfusion.server.CFService.setupMonitoringService(CFService.java:486)
  at coldfusion.server.CFService.start(CFService.java:699)
  at coldfusion.server.j2ee.CFStartUpServlet.startCFService(CFStartUpServlet.java:553)
  at coldfusion.server.j2ee.CFStartUpServlet.init(CFStartUpServlet.java:505)
  at javax.servlet.GenericServlet.init(GenericServlet.java:158)
  at coldfusion.bootstrap.ClassloaderHelper.initServletClass(ClassloaderHelper.java:121)
  at coldfusion.bootstrap.BootstrapServlet.init(BootstrapServlet.java:59)
  at org.apache.catalina.core.StandardWrapper.initServlet(StandardWrapper.java:1284)
  at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1197)
  at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:1087)
  at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:5210)
  at org.apache.catalina.core.StandardContext.startInternal(StandardContext.java:5493)
  at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:150)
  to org.apache.catalina.core.ContainerBase$ StartChild.call (ContainerBase.java:1559)
  to org.apache.catalina.core.ContainerBase$ StartChild.call (ContainerBase.java:1549)
  at java.util.concurrent.FutureTask.run(FutureTask.java:266)
  at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:617)
  at java.lang.Thread.run(Thread.java:745)

  13 October 2015 07:52:25 warn org.eclipse.jetty.util.log.JavaUtilLog
  WARNING: org.eclipse.jetty.server.Server@5d5db612 FAILED: exception java.net.BindException: address already in use: bind
  exception java.net.BindException: address already in use: bind
  at sun.nio.ch.Net.bind0 (Native Method)
  at sun.nio.ch.Net.bind(Net.java:433)
  at sun.nio.ch.Net.bind(Net.java:425)
  at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:223)
  at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:74)
  at org.eclipse.jetty.server.ServerConnector.open(ServerConnector.java:264)
  at org.eclipse.jetty.server.AbstractNetworkConnector.doStart (AbstractNetworkConnector.java:8 0)
  at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:69)
  at org.eclipse.jetty.server.Server.doStart(Server.java:303)
  at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:69)
  at coldfusion.monitor.jetty.server.MonitoringServer.startServer(MonitoringServer.java:109)
  at coldfusion.monitor.MonitoringServiceImpl.startJettyServer(MonitoringServiceImpl.java:196)
  at coldfusion.monitor.MonitoringServiceImpl.start(MonitoringServiceImpl.java:149)
  at coldfusion.server.CFService.setupMonitoringService(CFService.java:486)
  at coldfusion.server.CFService.start(CFService.java:699)
  at coldfusion.server.j2ee.CFStartUpServlet.startCFService(CFStartUpServlet.java:553)
  at coldfusion.server.j2ee.CFStartUpServlet.init(CFStartUpServlet.java:505)
  at javax.servlet.GenericServlet.init(GenericServlet.java:158)
  at coldfusion.bootstrap.ClassloaderHelper.initServletClass(ClassloaderHelper.java:121)
  at coldfusion.bootstrap.BootstrapServlet.init(BootstrapServlet.java:59)
  at org.apache.catalina.core.StandardWrapper.initServlet(StandardWrapper.java:1284)
  at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1197)
  at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:1087)
  at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:5210)
  at org.apache.catalina.core.StandardContext.startInternal(StandardContext.java:5493)
  at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:150)
  to org.apache.catalina.core.ContainerBase$ StartChild.call (ContainerBase.java:1559)
  to org.apache.catalina.core.ContainerBase$ StartChild.call (ContainerBase.java:1549)
  at java.util.concurrent.FutureTask.run(FutureTask.java:266)
  at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:617)
  at java.lang.Thread.run(Thread.java:745)

  Journal of the org.apache.catalina.core.ApplicationContext 13 October 2015 07:52:27
  INFO: CFMxmlServlet: Macromedia Flex Build: 87315.134646
  Departure from org.apache.coyote.AbstractProtocol 13 October 2015 07:52:38
  INFO: From ProtocolHandler ['http-Apr-8607"]
  Departure from org.apache.coyote.AbstractProtocol 13 October 2015 07:52:39
  INFO: From ProtocolHandler ["ajp-Apr-8007"]
  13 October 2015 07:52:39 com.adobe.coldfusion.launcher.Launcher run
  INFO: Starting the Server MS 39425

  This is a log file of 3rd instance having problems during the last reboot of the server:

  13 October 2015 init org.apache.catalina.core.AprLifecycleListener 07:52:02
  NEWS: APR charged base library Apache Tomcat Native 1.1.33 using APR version 1.5.1.
  13 October 2015 init org.apache.catalina.core.AprLifecycleListener 07:52:02
  INFO: Capacity APR: IPv6 [true], [true] sendfile, accept the [false] filters, random [true].
  13 October 2015 07:52:03 org.apache.catalina.core.AprLifecycleListener initializeSSL
  INFO: Initialized correctly OpenSSL (OpenSSL 1.0.1m March 19, 2015)
  13 October 2015 init org.apache.coyote.AbstractProtocol 07:52:04
  INFO: Initializing ProtocolHandler ['http-Apr-8603"]
  13 October 2015 init org.apache.coyote.AbstractProtocol 07:52:04
  INFO: Initializing ProtocolHandler ["ajp-Apr-8003"]
  13 October 2015 07:52:04 org.apache.catalina.core.StandardService startInternal
  INFO: Starting service Catalina
  13 October 2015 07:52:04 org.apache.catalina.core.StandardEngine startInternal
  INFO: Starting the Servlet engine: Apache Tomcat/7.0.54
  Journal of the org.apache.catalina.core.ApplicationContext 13 October 2015 07:52:14
  INFO: ColdFusionStartUpServlet: ColdFusion: from application services
  Journal of the org.apache.catalina.core.ApplicationContext 13 October 2015 07:52:14
  INFO: ColdFusionStartUpServlet: ColdFusion: version VM = 25, 60 - b23
  13 October 2015 07:52:25 org.eclipse.jetty.util.log.JavaUtilLog info
  INFO: Pier - 9.0.7.v20131107
  13 October 2015 07:52:25 org.eclipse.jetty.util.log.JavaUtilLog info
  {INFO: started o.e.j.s.ServletContextHandler@3c75e648{/,null,AVAILABLE}
  13 October 2015 07:52:25 warn org.eclipse.jetty.util.log.JavaUtilLog
  {WARNING: ServerConnector@69f41e78{HTTP/1.1 FAILED} {0.0.0.0:5500}: exception java.net.BindException: address already in use: bind
  exception java.net.BindException: address already in use: bind
  at sun.nio.ch.Net.bind0 (Native Method)
  at sun.nio.ch.Net.bind(Net.java:433)
  at sun.nio.ch.Net.bind(Net.java:425)
  at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:223)
  at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:74)
  at org.eclipse.jetty.server.ServerConnector.open(ServerConnector.java:264)
  at org.eclipse.jetty.server.AbstractNetworkConnector.doStart (AbstractNetworkConnector.java:8 0)
  at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:69)
  at org.eclipse.jetty.server.Server.doStart(Server.java:303)
  at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:69)
  at coldfusion.monitor.jetty.server.MonitoringServer.startServer(MonitoringServer.java:109)
  at coldfusion.monitor.MonitoringServiceImpl.startJettyServer(MonitoringServiceImpl.java:196)
  at coldfusion.monitor.MonitoringServiceImpl.start(MonitoringServiceImpl.java:149)
  at coldfusion.server.CFService.setupMonitoringService(CFService.java:486)
  at coldfusion.server.CFService.start(CFService.java:699)
  at coldfusion.server.j2ee.CFStartUpServlet.startCFService(CFStartUpServlet.java:553)
  at coldfusion.server.j2ee.CFStartUpServlet.init(CFStartUpServlet.java:505)
  at javax.servlet.GenericServlet.init(GenericServlet.java:158)
  at coldfusion.bootstrap.ClassloaderHelper.initServletClass(ClassloaderHelper.java:121)
  at coldfusion.bootstrap.BootstrapServlet.init(BootstrapServlet.java:59)
  at org.apache.catalina.core.StandardWrapper.initServlet(StandardWrapper.java:1284)
  at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1197)
  at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:1087)
  at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:5210)
  at org.apache.catalina.core.StandardContext.startInternal(StandardContext.java:5493)
  at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:150)
  to org.apache.catalina.core.ContainerBase$ StartChild.call (ContainerBase.java:1559)
  to org.apache.catalina.core.ContainerBase$ StartChild.call (ContainerBase.java:1549)
  at java.util.concurrent.FutureTask.run(FutureTask.java:266)
  at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:617)
  at java.lang.Thread.run(Thread.java:745)

  13 October 2015 07:52:25 warn org.eclipse.jetty.util.log.JavaUtilLog
  WARNING: org.eclipse.jetty.server.Server@340cadfc FAILED: exception java.net.BindException: address already in use: bind
  exception java.net.BindException: address already in use: bind
  at sun.nio.ch.Net.bind0 (Native Method)
  at sun.nio.ch.Net.bind(Net.java:433)
  at sun.nio.ch.Net.bind(Net.java:425)
  at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:223)
  at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:74)
  at org.eclipse.jetty.server.ServerConnector.open(ServerConnector.java:264)
  at org.eclipse.jetty.server.AbstractNetworkConnector.doStart (AbstractNetworkConnector.java:8 0)
  at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:69)
  at org.eclipse.jetty.server.Server.doStart(Server.java:303)
  at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:69)
  at coldfusion.monitor.jetty.server.MonitoringServer.startServer(MonitoringServer.java:109)
  at coldfusion.monitor.MonitoringServiceImpl.startJettyServer(MonitoringServiceImpl.java:196)
  at coldfusion.monitor.MonitoringServiceImpl.start(MonitoringServiceImpl.java:149)
  at coldfusion.server.CFService.setupMonitoringService(CFService.java:486)
  at coldfusion.server.CFService.start(CFService.java:699)
  at coldfusion.server.j2ee.CFStartUpServlet.startCFService(CFStartUpServlet.java:553)
  at coldfusion.server.j2ee.CFStartUpServlet.init(CFStartUpServlet.java:505)
  at javax.servlet.GenericServlet.init(GenericServlet.java:158)
  at coldfusion.bootstrap.ClassloaderHelper.initServletClass(ClassloaderHelper.java:121)
  at coldfusion.bootstrap.BootstrapServlet.init(BootstrapServlet.java:59)
  at org.apache.catalina.core.StandardWrapper.initServlet(StandardWrapper.java:1284)
  at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1197)
  at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:1087)
  at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:5210)
  at org.apache.catalina.core.StandardContext.startInternal(StandardContext.java:5493)
  at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:150)
  to org.apache.catalina.core.ContainerBase$ StartChild.call (ContainerBase.java:1559)
  to org.apache.catalina.core.ContainerBase$ StartChild.call (ContainerBase.java:1549)
  at java.util.concurrent.FutureTask.run(FutureTask.java:266)
  at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1142)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:617)
  at java.lang.Thread.run(Thread.java:745)

  Journal of the org.apache.catalina.core.ApplicationContext 13 October 2015 07:52:27
  INFO: CFMxmlServlet: Macromedia Flex Build: 87315.134646
  Departure from org.apache.coyote.AbstractProtocol 13 October 2015 07:52:40
  INFO: From ProtocolHandler ['http-Apr-8603"]
  Departure from org.apache.coyote.AbstractProtocol 13 October 2015 07:52:40
  INFO: From ProtocolHandler ["ajp-Apr-8003"]
  13 October 2015 07:52:40 com.adobe.coldfusion.launcher.Launcher run
  Information: Start the server in ms 40095

  Here is log file on an instance that really started properly (one of these instances of work entirely using port 5500, the other uses random ports):

  13 October 2015 init org.apache.catalina.core.AprLifecycleListener 07:52:02

  NEWS: APR charged base library Apache Tomcat Native 1.1.33 using APR version 1.5.1.

  13 October 2015 init org.apache.catalina.core.AprLifecycleListener 07:52:02

  INFO: Capacity APR: IPv6 [true], [true] sendfile, accept the [false] filters, random [true].

  13 October 2015 07:52:03 org.apache.catalina.core.AprLifecycleListener initializeSSL

  INFO: Initialized correctly OpenSSL (OpenSSL 1.0.1m March 19, 2015)

  13 October 2015 init org.apache.coyote.AbstractProtocol 07:52:04

  INFO: Initializing ProtocolHandler ['http-Apr-8608"]

  13 October 2015 init org.apache.coyote.AbstractProtocol 07:52:04

  INFO: Initializing ProtocolHandler ["ajp-Apr-8008"]

  13 October 2015 07:52:04 org.apache.catalina.core.StandardService startInternal

  INFO: Starting service Catalina

  13 October 2015 07:52:04 org.apache.catalina.core.StandardEngine startInternal

  INFO: Starting the Servlet engine: Apache Tomcat/7.0.54

  Journal of the org.apache.catalina.core.ApplicationContext 13 October 2015 07:52:15

  INFO: ColdFusionStartUpServlet: ColdFusion: from application services

  Journal of the org.apache.catalina.core.ApplicationContext 13 October 2015 07:52:15

  INFO: ColdFusionStartUpServlet: ColdFusion: version VM = 25, 60 - b23

  13 October 2015 07:52:26 org.eclipse.jetty.util.log.JavaUtilLog info

  INFO: Pier - 9.0.7.v20131107

  13 October 2015 07:52:27 org.eclipse.jetty.util.log.JavaUtilLog info

  {INFO: started o.e.j.s.ServletContextHandler@718d048a{/,null,AVAILABLE}

  13 October 2015 07:52:27 org.eclipse.jetty.util.log.JavaUtilLog info

  {INFO: started ServerConnector@51efa93e{HTTP/1.1} {0.0.0.0:55598}

  Journal of the org.apache.catalina.core.ApplicationContext 13 October 2015 07:52:30

  INFO: CFMxmlServlet: Macromedia Flex Build: 87315.134646

  13 October 2015 07:52:42 org.apache.coyote.AbstractProtocol start

  INFO: From ProtocolHandler ['http-Apr-8608"]

  13 October 2015 07:52:42 org.apache.coyote.AbstractProtocol start

  INFO: From ProtocolHandler ["ajp-Apr-8008"]

  13 October 2015 07:52:42 com.adobe.coldfusion.launcher.Launcher run

  Information: Start the server in ms 42366

  Here is our current, ShadoMX/util/Flex/SDK/bin/jvm.config file which is used on all instances (the difference for each is the path of the instance and for some arguments of Xms and Xmx different, other parameters are the same) :

  #
  # Configuration of the virtual machine
  #
  # Where to find JVM, if {java.home} /jre there are this JVM is used
  # If not then it must be the path to the JRE itself

  Java.Home=D:/Java/JDK1.8.0_60/JRE

  #
  # If no java.home is specified that a VM is located by searching these locations in this
  order #:
  #
  #  1) .. JRE/runtime /.
  Register # 2) (windows only)
  (# 3) JAVA_HOME env var more jre (IE $JAVA_HOME/jre)
  (# 4) java.exe in path
  #

  application. Home = D: /cf11/INSTANCEPATH

  # Arguments to VM
  Java.args=-serveur-Xms768m-Xmx1024m - XX : MaxMetaspaceSize = 256 m - XX : + UseG1GC - Xbatch-Dcoldfusion.home={application.home}-Duser.language=en-Dcoldfusion.rootDir={application.home}-Dcoldfusion.libPath={application.home}/lib-Dorg.apache.coyote.USE_CUSTOM_STATUS_MSG_IN_HEADER=true-Dcoldfusion.jsafe.defaultalgo=FIPS186Random-Dorg.eclipse.jetty.util.log.class=org.eclipse.jetty.util.log.JavaUtilLog-Djsse.enableSNIExtension=false-Dcoldfusion.disablejsafe=true-Dcoldfusion.classPath={application.home}/lib/updates,{application.home}/lib,{application.home}/lib/axis2,{application.home}/gateway/lib/,{application.home}/wwwroot/WEB-INF/flex/j ars,{application.home}/wwwroot/WEB-INF/cfform/jars,D:\\CF11\\Jars\\EAIMessaging , D:\\CF11\\ Jars\\ALLINSTANCES

  Java.class.Path={application.home}/lib/oosdk/lib,{application.home}/lib/oosdk/classes

  # Comma separated list of path for shared library
  /jintegra/bin/international,{application.home}/lib/oosdk/classes/win Java.Library.Path={application.home}/lib,{application. Home} / jIntegra/bin, {application. Home}

  Hi Pawel,

  I note on a system CF11 runs several instances I was looking at a ColdFusion11\INSTANCE\lib\jetty.xml.

  Part of said jetty.xml:

  0.0.0.0

  5500

  300000

  When I edit thrown 'port' section on my localhost CF11 to 5501 jetty.xml and start the coldfusion - error.log says CF11 part:

  October 14, 2015 08:27:18 org.eclipse.jetty.util.log.JavaUtilLog info

  INFO: Pier - 9.0.7.v20131107

  October 14, 2015 08:27:18 org.eclipse.jetty.util.log.JavaUtilLog info

  {INFO: started o.e.j.s.ServletContextHandler@15a081f{/,null,AVAILABLE}

  October 14, 2015 08:27:19 org.eclipse.jetty.util.log.JavaUtilLog info

  {INFO: started ServerConnector@d02caa{HTTP/1.1}{0.0.0.0:5501}

  After changing port 5501 I note CFadmin > server settings > settings summary > save as PDF button works well.

  HTH, Carl.

• Cannot start Adobe Application Manager

  I can't open the Adobe Application Manager. I tried to run setup.exe in the Adobe Application Manager 7.0 folder I downloaded. It is said that it will update the first time. After the first time I ran it, Adobe Application Manager is not yet "in my program list. Then, if I try to run again, I get an error. I tried tuning Adobe Support Advisor, but he tells me that it cannot find the questions. So, I can't run my Adobe application manager and I need to get my InDesign to the new version that uses the rest of society!  Windows 7, Adobe Creative Cloud

  Help!

  Justin MacCreery

  < deleted by the moderator >

  Hello

  Please follow these steps to solve the problem.

  Download and run Creative Cloud installer from this location.

  http://www.Adobe.com/support/contact/cscleanertool.html

  Once please download Creative Cloud Desktop Apps from this location.

  http://www.creative.Adobe.com

  After the creation of the clouds is installed, then you can download and install Indesign CC.

  Please let me know if it helps.

  Kind regards

  Abhijit