Cannot start, had to use safe mode. Event Viewer, event system properties, error "the device / Device / Harddisk:O / D, has a bad block.

Similar Questions

• Cannot start windows Vista in safe mode.

  I followed these instructions to start Windows 7 in safe mode:

  I tried to start windows vista in safe mode by using the following:

  1. Click on the Windows icon in the left bottom of the screen while Windows is running in normal mode.
  2. Click on the arrow located to the right of the lock at the bottom of the popup menu symbol
  3. Choose "restart".
  4. I restart the computer, press the F8 key and hold.  I tried at the beginning of the sequence to reboot and after that the light appears on the mouse, but still before the windows logo appears.
  5. Restart the computer in normal mode.
  6. I tried the key down and also tried pressing the F8 key several times both giving the same results without success.
  7. To eliminate the possibility of a bad keyboard, I switched from keyboards with the same results.

  Can you tell me what I am doing wrong?

  You tap f8.

  You can have a F-Lock key in the upper right corner of your keyboard.

  http://www.bleepingcomputer.com/tutorials/tutorial61.html

  Read the other way at the link above.

  Table of contents > Vista.

  See you soon.

  Mick Murphy - Microsoft partner

• XP won't start, or go into safe mode. problem w / file system.

  I have XP SP3, and while I was using it today, just to stop randomly and attempted to restart. I had made no changes to any system files or installed anything, etc...

  When he tried to restart, it froze to the logo screen and would not make progress, regardless of how much time was left for her. I tried to start in safe mode, and the usual list of system files and drivers ran to the bottom of the screen, stopping at Mup.sys it froze it there several times. I tried to start the Windows Recovery Console, nothing helps. I could not find my xp cd to try to fix him.

  I replaced my HARD drive died with a new one and now have XP SP3 on a single partition and Ubuntu on the other. I'll also do my data retrieved by Seagate. This problem is now resolved.

• Why can't start my computer in safe mode to do a system restore?

  When I try to go to eyetem restore in safe mode, it will not go. I think I get

  Registration errors can help with this problem?

  It is somewhat similar to the following Technet problem:

  "SP3 hangs at agpCPQ.sys during startup"
   
  who offers this article as a solution:

  "Problems when Windows XP tries to load the Agp440.sys service.
   < >http://support.Microsoft.com/kb/324764 >

  That may help your problem.
  HTH,
  JW

• Why can't I access the internet without using safe mode

  Help cannot access internet without using safe mode

  Hi Dharrington25,
   
  -Remember to make changes to your computer after that this problem started to happen?
   
  As you are able to access the Internet using the safe, put your computer in a clean boot state in order to identify the program causing this problem.
   

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See KB Microsoft article below for more information on how to solve a problem by performing a clean boot in Windows Vista or in Windows 7:How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Windows Vista does not start, not even in safe mode

  I have a HP desktop computer comes with Windows Vista installed on it.  I have no recovery discs, I have a hard disk recovery partition.  I can't start in safe mode.  I ran startup repair, tried restore points and even tried a complete pc restore, nothing works.  I am still unable to start Windows, even in safe mode.  Here are my coordinates of startup repair problem.  Can you please point me in the right direction?

  Problem event name: Startup Repair V1

  Signature of the problem 01: Auto failover

  Signature of the problem 02: 6.0.6000.16386.6.0.6000.16386

  03:6 problem signature

  Signature of the 04:655370 problem

  Signature of the problem 05: installation failed

  Signature of the 06 problem: no boot failure

  Signature of the problem 07:0

  Signature of the 08:0 problem

  Signature of the 09 problem: unknown

  Signature of the 10:1168 problem

  OS version: 6.0.600.2.0.0.256.1

  Locale ID: 1033

  Thank you!

  Traci

  If the HP recovery process does not work, it seems to be a hardware problem.

  And now that you mention have a blue screen.

  If it was a software problem, the process of HP recovery to reinstall the operating system should fix (take it back in new condition).

  And this new condition would exclude any incorrect hardware drivers may have installed the original problem.

  Have you tried HP support?

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  Or assistance HP Forums:

  http://h30434.www3.HP.com/

  See you soon.

  Edit:

  HP recovery process, you get the possibility of a destructive or non-destructive restore. If you use non-destructive recovery option, often have the same problems continue.

  The problem continues when you use destructive recovery too.

• I can only start my computer in Safe Mode - system hangs on startup after installation of updates

  Original title: UPDATES DOWNLOADED PROBLEMS to START NORMAL, MUST LOAD IN SAFE MODE - LOST AFTER 30-40 SECONDS VIDEO

  After the download and installation of updates on my desktop Gateway (FX7020) the computer freezes on me and was forced to shut down hard. After a few attempts to start the computer, I was able to get into safe mode. After some time in the exploration of the event viewer I tried out and re-start of normal BONE. I was unable to make it through the boot sequence and had to shut down hard again. I waited a while and it made back in safe mode, but this time after 25-40 sec. I lost the video, the mouse, the keyboard. Everything was running. I've read a few articles and I hope that I don't have a F... THE OS.

  Thanks any help will be graciously appreciated... RA

  Hello

   
  Method 1:
  You can try restoring the system to safe mode and check:
  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
  You can consult the links for:
  System restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
  
  Method 2:
  If the problem persists, you can refer startup Repair in Windows Vista, which is a recovery tool that can fix certain problems. You can check the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

• I can't start firefox even in safe mode.

  I can't start firefox. It is said that it can not load the profile. The profile files are there, I believer.
  I can't start firefox even in safe mode, by holding down the SHIFT key.
  I stopped firefox when he tried to do a refresh (it took a long time).
  So there is a record of old data that I copied the default profile folder.

  Hmm, also:

  arlener said

  .. There's a data folder I copied the default profile folder.

  If you want to use the content of the profile that you copied return, make sure that they don't are not 'nested' a layer down in the profile folder.

• Can not leave completely insensitive - Firefox, use Safe Mode, reinstall or uninstall

  I installed Firefox less than a month ago. Two days ago, that he left suddenly during the navigation. This does seem like a problem, really - I thought I would just restart - but it REMAINS open. Shows the icon in my dock (on Mac), and the menu bar appears when I click on the icon. I can browse the menu selections but can not choose one.

  I can't:
  -Leave Firefox - from the menu or with Ctrl + Q
  -Open a new fenΩtre
  -Open help
  -Access to "troubleshooting information.
  -Select "restart with modules disabled...". »
  -Use the Safe Mode

  Because I can not use Safe Mode and cannot leave the program, I have IMPOSSIBLE:
  -Uninstall (it refuses to remove, because the program is 'open', as it won't leave)
  -Reinstall (I can't substitute the existing because the program is 'open')
  -Remove my dock
  -.. pretty much anything else.

  I've read many articles dealing with troubleshooting, Safe Mode, reinstall clean, etc, but unfortunately I can't make one of these because Firefox is open but completely insensitive.

  (PS - I tried to install the below troubleshooting information, but, even once, because Firefox is not responding, I couldn't open it lol - there was "no application available" to read it.) I can't go through the manual steps because I cannot access the troubleshooting information in the Help menu and so cannot even begin step 1.)

  If anyone has any suggestions, I would be VERY happy! I thank very you much for your time and help!

  If qutting, it's because of the questions are now trying down option as you click the icon in the dock and choose force quit from the list!

  Also you have tired Fox fire rest functionality (otherwise said if your power to access)
  To do:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

• I can't start my pc in safe mode

  Can any one help I have a windows XP when I boot my computer I want to run in safe mode, to start, it ran windows normally or the safe mode options, but I can't move the selecter until safe mode, I think that the keyboard does not work on startup so I can't choose Safe mode no matter what knowledge is there another way to start in safe mode?

  http://bertk.MVPs.org/html/SafeMode.html
  (Scroll down to the "Alternative method to using the F8 key"...  "But you should understand why you don't have a keyboard at that time).

• Is it safe to use Safe Mod with networking for the use of the computer every day?

  Hi, my computer has problems to start normally and I was wondering, is it safe to use Safe Mod with networking for the use of the computer every day? I use the computer like 10 hours + every day. Is this correct and safe? Thank you

  Hello, Winston,

  It is actually for troubleshooting only.

  Networking Mode safe mode starts Windows in mode safe mode and includes the network drivers and services needed to access the Internet or other computers on your network.

  Some applications may not work properly or not at all if you use safe mode with networking for everyday computing.

  Wireless network adapter may not work when you use the Option "Safe Mode with network.

  http://support.Microsoft.com/kb/305616

  Safe mode disables most of the processes and services running. These services include the Windows Update service. »

• Can only use safe mode and can not access anything except firefox

  Basically, there are a few days all of a sudden, a box came up saying Windows Explorer has stopped working. No matter what I click, it returns constantly to the rear. Because I use firefox, I can't to anything except this, and I can't get him if I use safe mode.
  It is terribly annoying, I have 6000 + photos and other things I need, i.e. duties.
  How can I fix? I can't use the normal mode, and it's annoying.
  Thanks in advance.

  Then download your data either by:

  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

  2. you can start the target computer with a Bart PE (if you use XP) or a Linux live CD like Knoppix and retrieve the data in this way. General information about the use of Knoppix for this are:

  You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with sufficient capacity to store your data, OR an external hard drive formatted USB FAT32 (not NTFS) *. Download Knoppix .iso image file and create your bootable CD. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or the free ImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created, and Knoppix will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.

  * My understanding is that you can now write on NTFS from Linux partition. If you wish to do this, Google for instructions on the use of the NTFS driver.

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  Then do a restore clean factory/install of Windows.

  I want to emphasize that you should not take what I wrote as a definitive diagnosis. I can't see or test your computer from here. I give you my opinion on your computer based on my experience as a computer tech and what you have written. If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). MS - MVP - Elephant Boy computers - don't panic!

• I can't reboot my laptop computer in the start menu, but in safe mode, I can?

  Please help I have Windows 7 and when I try to restart or shutdown from the start menu, it is not the screen well come and say stop just but it stays like that and will not be closed. When I'm in safe mode, restart it or a stop on the start menu, it will be, please help thanks

  Try this link and if that does not work then you will probably want to contact the manufacturer of your computer. I will also include links to contact information for support of the brand from the other computer. By the way you are welcome. One last thing, if you don't have a security software on your computer, I recommend you put it on there. I'll also include a link to download Microsoft Security Essentials if you don't have a Security Center on your computer.

  Hope that all these information are useful and good luck... If you happen to still have trouble, I'll try to help you...

  Response to the problem of link:
  http://au.answers.Yahoo.com/question/index?QID=20110531023958AAYoXAO

  Download Microsoft Security Essentials link:
  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials
  
  Links to the brand of computer media:

  HP Support link:
  http://WWW8.HP.com/us/en/contact-HP/contact.html

  Toshiba Support links:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact&PF=true

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  http://www.toshibadirect.com/TD/B2C/home.to?src=MAXG&cm_mmc=SEM_Direct_Google&gclid=CNu-9YyFzbICFYeDQgodhmgAnQ

  Dell Support links:
  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support

  http://support.Dell.com/support/index.aspx?~CK_=_pn

  Compaq Support link:
  http://www.Compaq.com/country/cpq_support.html

  Sony VAIO support links:
  http://eSupport.Sony.com/us/p/select-System.pl?model_type_group_id=10

  http://eSupport.Sony.com/us/p/select-System.pl?Director=contact

  Samsung Support link:
  http://www.Samsung.com/us/support/

• iMac, 2012, 27″, will not start, not even in safe mode

  IMac my wife, 2012, 27″, El Capitan, will not start, not even in safe mode. The problem started during the installation of Mac Office 365 (2016), although the installation on my machine worked fine.

  The following two photos are sure Mac verbose mode. (Photos are from consecutive boots, that the camera did not focus, but the behavior of the Mac is constant in boots attempts.)

  http://www.jdawiseman.com/2016/20160218_230538_mac_wont_boot.jpg

  http://www.jdawiseman.com/2016/20160218_230059_mac_wont_boot.jpg

  Disc utilities reported an error. Although fsck - fy is not.

  Please, kind of people from the communities of Apple support, what should I try then?

  Thank you.

  Have you tried to boot into recovery mode. Combinations of keys start for Mac - Apple Support

  Select disk utility, then check the disc. Resolve startup issues and perform maintenance on disk with disk utility and fsck - Apple Support

  How much free disk space hard do you?

  What is the error Disk Utility has.

  Kim

• I can only start my computer in safe mode, what can I do?

  Hello

  I can only start my computer in safe mode and my security settings are turned off, what do I do?

  I tried to download an anti virus scan, but it does not work?

  Hello

  1. what happens when you start your computer in normal mode?

  2. what version of Windows is installed on your computer?

  3 are you aware of any changes made to the computer, before the show?

  Assuming you have Windows Vista or Windows 7 is installed on the computer,

  Method 1:

  Perform a clean boot and check for the issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.

  Method 2:

  Check if your computer is configured to start only in safe mode.

  a. Click Start, type msconfig and press ENTER.

  b. click on the Startup tab.

  c. under Start Options, uncheck safe startup.

  d. click on apply and OK.

  I hope this helps.