Device Manager cannot start or run due to incompatibility

Similar Questions

• Railroad Tycoon 2 on Windows 7 error - setup.exe cannot start or run due to incompatibility with 64-bit Windows versions

  I'm playing the game "Railroad Tycoon 2-Gold edition" on my laptop which is running Windows 7. Whenever I try to install it, he repeats to me - "the program or feature? \G:\_setup\setup.exe cannot start or run due to incompatibility with 64-bit Windows versions"... .and there is nothing I can't do to go around that at all.  Normally with my old games I can at least install, then just then change to be compatible and is not, but I can not here. Any help would be great I want to play this game, it's one of my favorites and I hate how I can't play everything simply because computers are better than them... If this is the case, then they should still be able to support games that are 10 + years older than them, you know? I can add more information if needed, thank you.

  You must contact the manufacturer to see if they have a patch for Windows 7. He would come by the manufacturer and not by Microsoft.

  Thank you

  Marilyn

• "\?? \C:\Windows\Explorer.exe"cannot start or run due to incompatibility with the 64 bit version of windows

  A friend gave me your laptop to watch - there edition family vista (64 bit (I think) on it and when you try to run Explorer he says it does not find or access is denied and something about 16 bit / 64 bit (it has been a few days and I'm not memory clearly until what I try again tonight)

  "\?? \C:\Windows\Explorer.exe"cannot start or run due to incompatibility with the 64 bit version of windows"

  If you try to run a dll / Panel or anything like that, you will get an error message saying that it cannot run some 16-bit process or access denied.

  I did a lot of research on Google and nothing someone he said worked - which "everyone" giving full access to the C:\WINDOWS\Registration, executes a command secedit, a sfc/scannow, do a system restore to the point of older, make a new user account, start up in safe mode...

  So now I'm pretty stuck. I'm SURE I've seen this problem before with reference to 16-bit etc error messages, but in home edition I do not have the MMC users & groups (had to make new user with password renew then that starts in another environment) or the Security tab of the properties of file/folder for permissions NTFS etc (had to use icacls).

  Can someone enlighten us justice on that shiney? : o I don't want to have to redo the entire Setup, I'm sure it is something fixable...

  OK, so for those who want to know the real difficulty? --He came from a guy on the forums of TekTips

  goombawaho (MIS)

  5-13 dec 08:05

  Before charging, tell him from a prompt CMD (Administrator). Go in the the C:/windows/system32 folder and type "Rename verclsid.exe verclsid.old. reset

  I guess that I didn't that I had seen the name "verclsid.exe" in some of these error messages trying to run things.  I looked and saw it was to check the files or something.
  Anyway I couldn't rename even in admin console so I started in a different environment and renamed the copy in system32 and syswow64.
  Now, I've started and bang things seem to be ok! I guess I should try and replace it with a known working version? That or just give back it.
  I doubt that everybody does all c:\windows control total should be too dangerous, right... just?  : P I don't have a way to put permissions by default anyway, so Hey.  Formatting beats!

  Now why everyone here didn't it?  I knew it would be simple!  : p

• Accidentally, I ended windows Explorer using 'process' in Device Manager. How to run again?

  Accidentally, I ended windows Explorer using 'process' in Device Manager. How to run again?

  Ah, found, well, oops

• What should I do when it says "Adobe Reader cannot open protected mode due to incompatibility with your system configuration"?

  What should I do when it says "Adobe Reader cannot open protected mode due to incompatibility with your system configuration"?

  Hi sharronw31229175,

  Please visit the below links for the same thing that it would be useful:

  Protected Mode Troubleshooting | Adobe Reader

  Adobe Reader cannot open Protected Mode due to a problem with the configuration of your system.

  Let me know how it goes.

  Kind regards

  Ana Maria

• Cannot run any application system as anything in the administration tools, network and sharing Center, Device Manager. No problem running the applications Office, IE, etc.

  Vista Ultimate, 32-bit, SP2 had worked perfectly for two months. Machine set up to now and when started the first time, no network connection and my video wallpaper stops with an error message that says to reboot. The 2nd restart, I get internet connectivity, no wallpaper at all and no access to system applications that are listed in the title line.

  I can open Documents and navigate around, click computer and see the disks, etc., right click on computer and view the properties, but it shows no RAM and processor. If I click on Device Manager on this window, it crashes just forever unless I have kill with Task Manager.

  I had Windows Live Onecare on this machine and it expired during the period, it was closed. No problem... I plan to install MSE.

  Originally, I installed a smaller version of Vista of CD (still have it) but upgraded to Ultimate online and is not a product for this upgrade CD.

  I need to know where to start on fixing Vista so that it works correctly.

  Thank you.

  Hello

  ·        Where you upgrade the system for full vista?

  It is better that you have the Vista Ultimate DVD, so I suggest you ask the DVD from the dealer.

  I suggest you to check in the Event Viewer logs and let us know the exact error.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  Method 1:

  I suggest you to do a scan of the SFC. File system (CFS) Auditor verifies that all Windows 7 system files are where they should be as they are by default and not corrupted, changed or damaged.

  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  b. click on continue or provide administrator credentials if prompted.

  c. in the type in the following command prompt window and press ENTER:

  d. sfc/scannow

  e. you should see the following message on the screen:

  § Begin the analysis of the system. This process will take time.

  § Beginning verification phase of system scan.

  f. % verification complete.

  g. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  For more information, see the article mentioned below.

  http://support.Microsoft.com/kb/929833

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Mass storage device USB cannot start. Why?

  When I attach a USB to my computer, it is detected, but the driver cannot be found. In drivers and the printer it says troubleshooting.

  It reinstalls the device drivers and shows the rest of the dialog box whenever I run the troubleshooter.
  [Window title]

  Installing the software driver

  [Main instruction]

  Device driver software was not successfully installed

  [Close] [Window title]

  Installing the software driver

  [Main instruction]

  Device driver software was not successfully installed

  [Close]
  Now, in the mass storage device properties, it shows the device status as "this device cannot start. (Code 10) »
  "Rental: Port_ #0002.Hub_ #0004" I also put driver, but it is up to date.
  Driver version: 6.1.7601.17577
  Driver date: 21/06/2006

  Hi Jessica,.

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  I suggest you follow the steps in the link given below which will help you solve this problem.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

• Device Manager cannot recognize Installed AMD Phenom II X 4 955

  Hello

  I have HP Pavilion a6560a Desktop and had 9850 AMD processor running Windows 7 Professional with SYSTEM 7.1 rating. I installed AMD Phenom II X 4 955 CPU but or the windows Device Manager recognize my CPU as 955, it reads with 803 Mhz AMD processor as being unknown and the System CPU rating is down from 7.1 to 3.7. Could you please guide me what should I do for the motherboard to recognize the new AMD 955 processor?

  However Windows 7 is loading and the system works very well. but the system side is low and Manager device and POST do not recognize that the new installed CPU.

  Thank you

  Concerning

  "Is there a way I can update the firmware for this CPU? No, unless you can find someone to change the BIOS, as HP has not.    Perhaps you could make friends with guys to BIOS Mods to ask a mod firmware for the BIOS.

• Opticarc dvd rw ad - 7580 a ata device. Cannot start car

  I have a Dell 1525 laptop and a SATA from Opticarc DVD RW AD 7580 A disc.  When I access the drive through device manager it shows the latest version of the driver is installed (but the list for the reader has a yellow shield with exclamation point).  It does not start and does not appear in windows Explorer.  How can I fix it?

  Most of the time this article solves the problem...

  http://support.Microsoft.com/kb/314060

  .. There's instruction manual and a Fixit. FixIt is not a good reputation on this forum, but maybe it's because we tend to hear only about the time that they do not work!

  Tricky

• Missing J4680 Device Manager - cannot scan

  I had to reinstall my J4680.  But now, I don't see where I can choose the functionality of the PC analysis.   It only shows the printer.  Am I missing a Device Manager?   Where can I find?

  I downloaded the Dominican Republic and all is well.   But when I click on the printer I don't have the option to Scan, he just tells me what is printing.

  I just find HP program.    Thank you

• Windows boot manager / cannot start windows

  I currently have windows vista and at startup, I get the following message. Windows could not start. He recommended I insert the installation disc and restart my computer, but my computer (gateway) came with vista installed.

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.gateway.com/s/software/MICROSOF/Vista/7515418/7515418asi.shtml

  Read the above about gateway Recovery Options.

  See you soon.

  Mick Murphy - Microsoft partner

• Try to install additional Manager - "cannot start the Volumes App Manager.

  I am trying to install a 2nd Manager, the installation went well and the service starts, but landing page displays "boot failure":

  ODBC::error: S0002 (208) [Microsoft] [SQL Server Native Client 11.0] [SQL Server] invalid object name 'svconfigurations '. : EXEC sp_executesql does SELECT TOP (1) [svconfigurations]. * FROM [svconfigurations] ORDER BY created_at DESC'

  I installed the native client SQL 2012 and updated the DSN (x 86 and x 64) to use this instead as a test driver, but it made no difference.  I followed the documentation and unchecked the box replace, so my main Manager is always fully operational.

  Any ideas?

  It was the permissions, but not to the msdb database.  I had set the default for the user [dbo] schema, but what worked was [db_owner] (he always had the db_owner role, btw).  Small change, began services, all systems go.

• Cannot start MS M30 due to damaged files

  Hi people,

  I am a proud owner of a Satellite Pro M30. Way I wanted to start the laptop today he said theres a file damaged \windows\system32\coonfig\system.

  I had a look at the website mocrosofts and found the solution for the problem: How do I recover from a corrupted registry that prevents Windows XP startup
  But the problem is - it does not work with the product recovery CD. I don't know what to do now, I really need help!

  THX

  Hello Seppl

  If you try to repair the OS, I have to say that you will not be able to do using the restore CD. Restore CD contains recovery image and repair option you must use the facilities of Microsoft CD. Maybe some friend of you's original facility Microsoft WXP CD.

  Using the recovery CD, you can do the clean operating system installation.

• lost my controller ethernet and sm bus controllerafter reinstall Windows xp. Device Manager cannot find the drivers. Any suggestions?

  using a computer compaq Intel refurbished. At drivers before reinstalling windows xp. Try to join I have pad and Netflix via a NETGEAR router, but cannot do so without ethernet controller.

  Hello

  Please go to the Microsoft Community Forums.
  Description of the question, we understand that you want to reinstall the Ethernet drivers.
   
  If you could answer a few questions that would help us resolve this problem:
  1. What is the brand and model of the computer?
  2. do you have the CD/DVD driver provided by the manufacturer of the computer?
  3. are you able to connect to the internet?
   
  -We would like to say that you can install the network card drivers from the CD/DVD driver provided by the manufacturer of the computer.
  -In addition, you can download all these drivers on a USB of the computer manufacturer's website and install it on the desktop.
   
  Hope that answers your query. If the problem persists, answer us the answers to the questions above so that we can help you further.

• Svchost.exe cannot be started due to incompatibility with 64-bit windows

  I am getting... The program or feature "\?". \c:\users\John\AppData\Roaming\Microsoft\svchost.exe"cannot start or run due to incompatibility with the 64 bit version of Windows... Someone knows how to fix... I have the Security Tool virus a few days if it matters.

  I am getting... The program or feature "\?". \c:\users\John\AppData\Roaming\Microsoft\svchost.exe"cannot start or run due to incompatibility with the 64 bit version of Windows...

  It's a malware. The original Windows system file is stored here:

  C:\Windows\system32\svchost.exe

  Perform a complete equipped with scanning AntiVirus as well as Microsoft Security Essentials scan your PC with Malwarebytes' Anti-Malware.

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/