Cannot start normally my Qosmio

Similar Questions

• Cannot start normally after target disk Mode

  I received a 'new' 2015 documents transferring manually, Macbook Pro and I am. media and other elements of my Macbook Air from mid-2012. I put my MBA in disc Mode target to easily transfer files via Thunderbolt, but now I can't start my MBA normally - it's booting into OSX utility. I tried to close a few times, I tried to go up while pressing Option, nothing seems to work. [I am able, start-up by pressing T, to back up in target disk Mode.]

  Am I missing something? How can I get my MBA operate again as a normal computer? Thank you.

  Is it possible that you moved * elements of the MBA to MBP instead of copy them? When one of these "other elements" outside your user folder?

  * This means: hold the command key while dragging.

• Cannot start windows on Qosmio G30

  Hello

  I have a Qosmio G30 and I can't start windows XP MCE. When I start the computer, I see first is the screen "Qosmio" and there is no problem but when Windows starts, I see the logo and the background is filled with white dots. After that, windows logo disappears and the lines is still there. Finally, the screen goes black.

  I formatted the computer and reinstalled windows, everything worked fine until I rebooted. Unfortunately, the problem is still there.

  I can connect to windows if I hit F5 when booting up and then choose "safe mode".

  What can I do?

  Hello

  Have you installed the operating system from the recovery CD delivered?
  I asked because it sounds a little like a graphics card or graphics driver problem.

  > I can connect to windows if I hit F5 when booting up and then choose "safe mode".
  This is possible because the graphics driver is not loaded in windows safe mode and OS uses the common Microsoft driver.

  I would recommend the boot safe mode and then delete the preinstalled graphical driver.
  The new driver can be downloaded from the page of tosh.

  But if this procedure doesn't help and the strange lines appear again, I guess that the malfunctioning of the graphics chip
  In this case the laptop must be checked by a technician

• Cannot start normally infected says windows blaster worm Win32?

  Please help, I'm computer illiterate. I tried the bios I tried recovery tool. I can't even restore to factory settings pls help.

  It is always sensible in this situation to achieve a malware check

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.

  http://www.Malwarebytes.org/

  Download and run SuperAntiSpyware (Free Edition)

  http://www.SUPERAntiSpyware.com/download.html

  Some malware is installing the entries of proxy server redirecting internet connections. If you encounter this problem step 2 see in the following link:

  http://www.myantispyware.com/2011/02/21/how-to-remove-Internet-Security-Essentials-virus/

  Information on safe mode

  http://www.articlesbase.com/operating-systems-articles/using-Windows-in-safe-mode-4119768.html

• Cannot start Windows and "Begin repair of launch" or "Start Windows normally" did not work.

  Original title: need help URGENT

  The normal Windows Vista (Home Premium 32 Bit) updated on my DELL INSPIRON laptop... Cannot start Windows

  'Launch Startup Repair' or 'Start Windows normally' did not work.

  What to do next without deleting my data? Thank you.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  Data recovery, if required

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method depends on your hardware in the computer that failed

• Cannot start Windows 'Normally' or in 'Safe Mode '.

  A lot of problems with USB drivers, I found an answer in the forums here, who directed me to the site to download the appropriate drivers for my chipset from Intel.  Download seemed to go OK; When asked "reboot now?" I selected Yes.  In about 30 seconds, I had a window (similar to the command prompt) asking if I wanted to start the computer in the last good known?  He also had options to start in Safe Mode, Safe Mode with networking, and Safe Mode with command prompt.  I first tried to start normally, but without success.  I then tried the other option (several times), none were successful.  I turned off the computer using the power button and then it starts again, but nothing helped.  The four options have failed once again.  The main thing is I'm unable to get the computer started in any Mode, so that I might be able to fix the problem.  I'm afraid I might have to reinstall Windows, once again.  The computer is running Windows XP Home Edition, SP 3.  I use my wife's cell phone to access the forums.  Any help will be greatly appreciated.

  WOLLAM

  Well, if you some drivers day and now have a problem in your Startup Options menu, you must first choose the option best suited for these kinds of my system does not start after an update types of problems:

  Last good known Configuration

  Last good known Configuration is the configuration XP saved the last time that Windows starts successfully and choosing that option can allow you to start long enough to undo (roll back) what that either got your first distressed system.

  If the system starts with the last known good Configuration, uninstall (restore) the update of the afflicted driver and get the right drivers for your system.

  If you still can't boot from your Startup Options menu, choose the option:

  Disable the automatic restart in the event of system failure

  Then you can see a Blue Screen of Death with information that will help solve your problem.

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Please vote my posts as helpful so I can get a lot of points. I'm saving for a pony! Everybody don't like Raymond.

• Cannot start the operating system preinstalled on Satellite L350-170

  Hello!

  Today I was surfing on the internet on MSN etc and my phone froze. I tried control, alt, delete etc and nothing happened so I finally pushed the power button.

  When I turn on the laptop now I get this:

  * Windows Error Recovery *.

  * Windows cannot start. A recent hardware or software change might be the cause.*

  * If Windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem. If the people was interrupted during startup, choose Start Windows Normally.*

  * (Use the arrows to select your choice.) *

  Launch Startup Repair (recommended) *.
  * Start Windows normally *.

  When I choose the first option (startup to launch repair) a loading bar comes up saying "Windows is loading files...". ': then a loading bar "Microsoft Corporation", then this charge and brings me to a gray screen:

  http://i43.Tinypic.com/23jspqe.jpg

  When I select the second option (start Windows normally), I just get this loading bar for ages, and that the bar is load from the top down, I kept it at least half an hour, a few times and it still remains on the loading below bar:

  http://i43.Tinypic.com/sw3jbt.jpg

  Any help is much appreciated, thank you!

  Hello

  Start your laptop and press F8 to display the advanced startup options.
  Option repair my computer is available?

  If so this option allows to enter system recovery option. There is option called Startup Repair. Try using this option to solve this problem.

  Let me know if this will help.

• Railroad Tycoon 2 on Windows 7 error - setup.exe cannot start or run due to incompatibility with 64-bit Windows versions

  I'm playing the game "Railroad Tycoon 2-Gold edition" on my laptop which is running Windows 7. Whenever I try to install it, he repeats to me - "the program or feature? \G:\_setup\setup.exe cannot start or run due to incompatibility with 64-bit Windows versions"... .and there is nothing I can't do to go around that at all.  Normally with my old games I can at least install, then just then change to be compatible and is not, but I can not here. Any help would be great I want to play this game, it's one of my favorites and I hate how I can't play everything simply because computers are better than them... If this is the case, then they should still be able to support games that are 10 + years older than them, you know? I can add more information if needed, thank you.

  You must contact the manufacturer to see if they have a patch for Windows 7. He would come by the manufacturer and not by Microsoft.

  Thank you

  Marilyn

• Power went off looking at the TV Media Center. Now whenever I try to watch live TV, the program starts normally but freezes as soon as the audio starts.

  Original title: Media Center 2005 Edition

  I was watching TV using Media Center on my PC HP Media Center m7367c PC (running Windows XP Professional Version 5.1.2600 Service Pack 3) when the power went off.   Now whenever I try to watch live TV, the program starts normally but freezes as soon as the audio starts.  The audio works fine, but no picture, the small rotating circle of progress hangs and the screen is frozen.  I can click the X (close Box) and the program closes.   I expect there are only one or two corrupt files that need to be cleaned or replaced.

  HP support is to use recovery discs to clear the system and return it to the original configuration.   Given all the software, data and updates, I have to restore, I don't want to go down this road.

  I tried running SFC/scannow but Windows XP system discs are needed and the PC vendors ceased to provide systems with their PC discs there are many moons.  I bought Windows XP Professional with Service Pack 3, but he came on one drive and requests SFC disk #3 while parsing.

  I go back to the original driver TV tuner and then updated to the more recent but not joy.  I think that the problem is with a program or file Media Center.  Now when I try to configure the TV signal my cable box is recognized and then as soon as the audio lights, MCE 2005 hangs and the tiny TV screen remains black.

  I expect a file Media Center must be cleaned or reset but before I realize FUBAR I thought that he better come on this Microsoft forum and see if someone who knows what they are doing can provide the solution.

  Hi, Rudy386MS,

  Sorry for the late reply.  Do you have the problem solved?

  If Sfc/scannow solicits the disks, then you have corrupt or missing files whose analysis cannot replace or repair.  The alternative is a complete recovery of Windows.

  Open the control panel and select Media Center

  Click on uninstall

  Select the repair option

  Click next

  Click Finish when you are prompted

  See if that helps.  If not, then the recovery process will be needed

  Startup of HP systems to screen recovery (repair) when you reboot and start typing the F11 key.  According to me, that it gives you the choice to 'Fix' that leaves your files intact or 'Recover' system that will put you back to 'out of the box' condition.

  There is a Recovery Manager in the folder all the HP programs which includes Disc Creator.  You can create your own recovery discs.  I suggest using DVD instead of CD - R.  They allow more memory space.

• test of strength of dirt the program cannot start because OpenAL32.dll is missing

  test of strength of dirt the program cannot start because OpenAL32.dll is missing

  Hello

  Did you change your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  Check to see if the problem exists in a clean boot state.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: after you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a.Click Startand then click run.

  b.Type msconfig and then click OK.
  The System Configuration utility dialog box appears.

  c the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  d.When you are prompted, click restart to restart the computer.

  Method 2

  If the problem exists, you can uninstall and reinstall the program.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Note: Make sure you have the installationd disk before you uninstall the program

  See also:

  How to manually remove programs from the add tool / remove programs

  http://support.Microsoft.com/kb/314481

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

• webcam works but the software cannot start the capture device

  Original title: webcam problems

  purchased the software igambin movie2 stop motion, as well as a logitech c500 webcam. The webcam works but the software cannot start device capture. The support of igambin seems to think that it might be the interface or something access to webcam all the time. Any ideas out there. Thank you

  Hi reefwatcher,

  1. Did you the latest changes on the computer?
  2. You are able to use the webcam on other applications?
  3. You receive an error message?

  Method 1

  To check if a program is installed on the computer interferes with the software, I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 2

  If fails it above step, try uninstalling and then reinstalling the program, check to see if it helps.

  http://www.ikitmovie.com/15/stop-motion-animation-tutorial.htm

  http://www.ikitmovie.com/free-trial-stop-motion-software.php

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Method 3

  If the previous step fails, then you will need to contact the software retailer for assistance.

  http://www.ikitmovie.com/contact-us.php

• Error message at startup: "cssauth.exe instance cannot start due to an initialization error" and also unable to open help and the file

  Original title: cssauth.exe instance cannot start, help and Support of file disable

  Whenever I connect to my windows XP, it still says cssauth.exe instance cannot start due to an initialization error and I could not open my file help and suppot. Please help me. Thank you before

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. What is the brand and model of the computer?
  4. who help and support files are you referring to?
  5. what exactly happens when you try to open it? You get the error message?

  cssauth.exe is related to the Client Security Solution.

  Step 1: Try disabling startup cssauth.exe in the configuration of the system.

  Here's how:

  1. click on start > run.
  2. type msconfig and press ENTER.
  3. click on the Startup tab.
  4 locate cssauth.exe, and clear the check box for this.
  5 restart the computer and check for the issue.

  Step 2: If you still get the same error at startup then perform the clean boot on the computer.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  I would also ask you to contact the manufacturer of the computer because the problem is with the client security software that is provided by them.

• Ms more recent update for my VISTA plus old (2008 Acer laptop) was the last event, now cannot start PC... recovery tests without success... Help, please...

  Ms more recent update for my VISTA plus old (2008 Acer laptop) was the last event, now cannot start PC... try to recovery without success, a loop back and asking to recover or normal boot...  Attached to jumps, safe to ask if I want to recover...  I never received an OEM of VISTA version, but the first time having problem after all these years...   Help, please...  Would contribute to a boot disk, if so, how can I get a copy?...  Thanks, Dave * address email is removed from the privacy *

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And here's how to use Recovery of Acer.

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. After that the Acer eRecovery Management application is loaded, select your type of restore.
  5. Read the review and then click Next when you are ready.
  6. Click Next to start the restore process. It may take 10 minutes up to an hour fom anywhere to restore.
  7. Once the restore is complete, your computer will restart. After the reboot it will load Windows and start the installation of your software and drivers. Your computer will restart several times during this process. Once they are all completed, your computer will be like it was when you bought it first.

  See you soon.

• Standard VGA driver cannot start (code 10) _

  My graphics were a little bit lately and I noticed that a driver does not want to turn on. I uninstalled and reinstalled but still does not work.

  Device type: display adapters
  Manufacturer: (Standard display types)
  Location: PCI bus 2, device 0, function 0

  This device cannot start. (Code 10)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  Hello

  The system starts in SafeMode ok? If so, then the problem is not with a standard VGA driver, but rather those used by your video card in normal mode.

  At a command prompt, run sfc/scannow. To open a command prompt, click Start and type CMD. Right click on the menu entry that appears and choose "Run as Administrator". Click on continue in the UAC prompt. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• my HP Vista computer cannot start and stay sleeping mode.

  my HP Vista computer cannot start and always stayed at the sleeping mode. Help...

  Hello

  1. is it a desktop or laptop computer?

  2 have you made any changes to the computer before the show?

  3. what happens when you tried to wake the computer from sleep mode?

  Method 1:
  
  Step 1: Safe Mode

  Start your computer in safe mode and check the number.

  
  To start your computer in safe mode
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
  
  Step 2: Clean boot
  
  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  
  http://support.Microsoft.com/kb/929135
  Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.
   
  I hope this helps.