cannot start start - used

Similar Questions

• Cannot start using AutoPlay cd

  Using windows 7.  Do not have the ability to launch a CD from my D drive. I enter the files on the CD and run like that.

  At this work correctly before? Check your Windows 7 Autoplay settings:
  http://www.techtalkz.com/Windows-7/516004-how-configure-AutoPlay-settings-Windows-7-a.html

• Pavilion G6-2213 nr: cannot start using HP system recovery disks

  Hi all

  I have a laptop of Pavilion G6 2213 nr and I had problems and ran diagnostics from the system on it and he failed the hard drive of the short dst test, so I ordered HP recovery discs and a new hard drive on ebay. I have put in the new drive hard, pop in the first recovery disc in the drive, and when I try to boot from the cdrom drive, it says 'press any key to boot from the CD or DVD... ». After pressing a button, it goes on the page 'selected boot image could not authenticate. So I searched online and found in this case, I should turn on legacy mode and turn off secureboot. So I make this change in the bios and go out with gain and he enter a four digit code + enter to make the change in legacy mode. After you have entered the code, the computer restarts and wonder at new "press any key to boot from the CD or DVD...". ». I press a key, and then it takes me to a page in black/white with only a blinking cursor and never does anything else. With the new drive hard in, I ran the memory and the hard drive a broad diagnosis and pass the two tests.

  Does anyone have any suggestions? What is the DVD player? Or sata controller (not that I really know what that means, I just read in a post somewhere in a case similar to what is probably the DVD drive or a SATA controller).

  Any help is appreciated!

  KyleDWilly wrote:
  

  I'll try that. Thank you.

  You are quite welcome.

  You will need to have a hard drive replacement, which is at least 160 GB of capacity!

  A 120 GB hard drive (or SSD) will not work with the Recovery Manager.

  The usb recovery media is the image recovery factory in about an hour and it is a sustainable product. If there is a scratch on the side of the label of a recovery disk, the entire set of recovery disks becomes unusable.

  A factory image recovery with recovery disks can take two hours or longer time to complete.

• Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Hello

  I suggest to refer to this link and follow the steps in this link and check if that helps:

  http://support.Microsoft.com/kb/943104

  It will be useful.

• I tried Windows 10 and after 10 days of hell, I asked them to uninstall.  But went with is my old Acrobat Reader.  I tried to use it, but it says that my browser plug is missing and that it cannot start because MSVCP120 is missing on the computer too.

  I tried Windows 10 and after 10 days of hell, I asked them to uninstall.  But went with is my old Acrobat Reader.  I tried to use it, but it says that my browser plug is missing and that it cannot start because MSVCP120 is missing on the computer too.  A friend told me that I have to uninstall and then re-install again.  I am a 71 years who does not know what to do.  Help

  Hi jimm13886845,

  Of course I'll help you get this problem is resolved.

  Run this cleanup tool to uninstall any old version of Adobe Reader Download Adobe Reader and Acrobat tool - Adobe Labs.

  Restart your computer and then installer you old version of Adobe Reader using this link Adobe - Adobe Acrobat Reader DC Distribution.

  Let me know if you encounter a problem, we will be happy to help you.

  Kind regards

  Nicos

• Cannot start the database the R12 DR Oracle EBS of RAC 10 g R2 using SRVCTL

  Hello
  
  I've implemented Oracle 10g R2 RAC data DR Guard for main server Oracle 10 g R2 RAC for EBS R12 (12.0.4).
  I followed Note + ' Business Continuity for Oracle Applications Release 12 on Release 10 gr 2 - Single Instance Database and RAC [452056.1 ID]. +.
  After you configure DR DG, I added DR Database to the Configuration of the Cluster. But I'm not able to start the DR Database via SRVCTL. But able to start the DR Database through Sql * more. I have already mentioned Note: + troubleshooting when srvctl cannot start the RAC instance, but sqlplus can start [ID 844272.1] + and tried to solve the problem but without success.
  
  , I opened SR but still, the problem is not resolved. Are there steps I need to do that is not mentioned in Note 452056.1.
  
  Rgds,
  Thiru

  Have you reviewed these docs?

  CRS - 215 srvctl cannot start ASM, listener, %ORACLE_HOME%/bin/ resources RDBMS with error [740319.1 ID]
  Could not start the Instance with Srvctl, no Info in the newspapers of Imon [ID 741212.1]

  Thank you
  Hussein

• Cannot start emctl to use Oracle Enterprise Manager

  I'm trying to start emctl service to be able to use the web interface to Oracle Enterprise Manager: http://Server_host_name:5500 / em
  
  
  
  Here is what I get when I try to start emctl:
  
  
  
  # < strong > emctl start < facilities >
  
  < em > TZ value US / Central
  
  The MA Configuration problem. /Oracle/product/10.2.0/db_1a/server_host_name_orcl not found. < /em >

  EmcA allows to configure everything first.

  Do start using emctl.

  Published by: jaideepdba on November 6, 2008 07:14

• Tecra S5 - adapter to display cannot start - Code 10

  Hello

  I have a problem with my laptop (Tecra S5 series).
  Every time when I start or restart my laptop, the screen moves too slowly, it has yellow bands and sometimes is flashing.
  When I open the Device Manager I see the graphics card (NVIDIA Quadro NVS 130 M) with yellow circuit with a brand extension. When I go inside it is said: the device cannot start. Code 10.

  Then I have to go Safe Mode, uninstall the drivers for NVIDIA Quadro NVS 130 M, reinstall and restart. I noticed that when this video adapter is OK, so I don't have problems with my laptop screen.

  Can someone help me?

  What operating system do you use?
  I put t know since when you have this problem, but if this happens again and again I recommend you to install original OS that you got with your laptop. It contains the original, including the display driver drivers, and something like that should not happen.

• Cannot start the satellite M35X

  Hi all.

  Cannot start my Satellite.
  When I push the power button, it turns on, the blue led is ok but the HDD led blinks 1 or 2 times or it happened when it is not clear at all and put the laptop off, but the power button remains lit.

  However, from time to time, it starts up, shuts down load the XP but after 1 minute.

  I have reinstaled recently the WinXP, and I did a bios update. Before that, the laptop didn't have this behavior, however, the XP raported me that the hard drive is faulty.
  I figured it is something related to the HARD drive.
  What should I do?

  How can I be sure that the HARD disk is wrong?

  Hi mate,

  If your HARD drive has bad sectors, you must exchange it ;)

  For example before doing this, you can check for bad sectors using specific diagnostic tools HDD as Drive Fitness Test:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  Here, you can download an image file to create a boot disk. Then boot from it and to start the test, it is quite easy! ;)

  If your HARD drive is faulty, this tool should recognize this.

• Portege Z930 cannot start with installed RAM module

  My laptop Toshiba Portege Z930-108 has stopped booting with any module of RAM installed in the support.

  If I remove RAM module, laptop computer starts and works fine, but if I install any module of RAM (4 GB 1600 original or a new 4 1600 CL9 or 1600 8 CL11) the computer cannot start.

  The screen stays black and power led flashing two green and two orange and a few seconds later, 3G indicator also on blue.

  This is the only problem I have with this computer, but it's strange.

  I updated the BIOS to the latest version and the problem is not resolved.

  I tried to reset the hardware (http://aps2.toshiba-tro.de/kb0/TSB3B03J90000R01.htm), also I tried to reset the equipment with power button 30 seconds without battery but button without success.

  Any idea on this problem of strage?

  Kind regards
  Lito.

  I guess you used bad RAM or not fully compatible modules.
  It's the only plausible explanation.

  I recommend you to order the RAM modules recommended by Toshiba that are:

  4 GB DDR3 - 1600 PA5037U-1M4G

  2 GB DDR3 - 1600 PA5037U-1M2G

• Outlook cannot start because DCIMAN32.dll is missing

  Whenever I want to open Microsoft outlook the following textbox is displayed. * The program cannot start because DCIMAN32.dll is missing on your computer. Try reinstalling the program to fix this problem *. Then when I click ok, Outlook opens. Also when you use Internet Explorer, the window open flashes quickly, any suggestions?

  Thank you for your help

  Hey,.

  And have you tried to reinstall Outlook, such as mentioned in the error message?

• Re: Satellite A210 - cannot start and how can I backup my data?

  Hi, after installing some software of spyware on my vista A210 (spysweeper) I rebooted my laptop, restart it went straight to the Boot Manager and load insert me my recovery disc and follow the instructions in an effective way. The only options I have with this disc to format my hard drive, it seems to indicate that it will erase everything (that would include things on my partitioned drive?).

  No there is no way to start the PC in safe mode? I tried using the F8 key, but couldn't get the SafeMode menu by using the recovery disk to start my machine. So when I chose to start windows in safe mode it loaded the disc in place.

  This sounds like a familiar problem, if so someone knows how can I restore the last parameters of weeks without access to windows?

  I'll have to swallow and format my drive, on the partition that I have a few photos, etc. that I've not saved yet a trip last week so I want to only do this as a last resort?

  Would I be able to go buy a copy of vista and fix it using the CD? My laptop came with windows vista installed but no windows disk.

  Any help is very appreciated!

  Thank you.

  If you are not able to go into the F8 advanced boot menu, you cannot start in safe mode. It's done.
  I think the only way is to reinstall Vista.

  The reason why the laptop came without installation disk is the disk HARD on the second partition a folder called "HDDRecovery". This folder contains the factory settings and you can restore it if you go to the menu of advanced, boot repair my computer and then you can select the Toshiba Recovery feature.
  In addition, you always get a reminder message that you must burn this image to a DVD:
  + Important INFORMATION +.

  + your system is equipped with a hard drive recovery system. If you need repair.
  + your computer in the restaurant to original factory State, you can do it directly.
  + HDD (press F8 when you start your computer, choose "Repair your computer" +)
  + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

  + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
  + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
  + Gets severely damaged.

  However, now it is too late to burn the recovery disc.
  In your case, I would order a Toshiba Recovery disk directly. Then, you can reinstall the laptop and the Toshiba drive already contains all the drivers and tools.
  Here you can order: [https://backupmedia.toshiba.eu/landing.aspx]

  If you use the recovery disk Toshiba that the whole HARD disk will be formatted. You should back up your data before doing this.
  To do this, you can buy an external HARD drive enclosure. Remove the HARD drive from the laptop, put it in the case and plug it into another PC or laptop. Then, you are able to save your data.

  I hope I could help you.

• Satellite Pro A60: Windows XP cannot start isapnp.sys driver missing or corrupt

  I had a Satellite Pro A60 for about 3 years without problems.

  Last week Toshiba touchscreen developed vertical lines of the bleeding and I got error message "Windows XP cannot start because of the missing or damaged driver isapnp.sys. I tried using the recovery disk, but it loads OK, but it fails to make a difference. Hard drive seems to work OK as slave to another computer.

  No matter what wil suggestions appreciated!

  Thank you

  Found this Microsoft Knowledge base article:
  You receive a "Windows didn't start because the following file is missing or corrupt: Isapnp.sys" error message at startup

  http://support.Microsoft.com/kb/315311/en-us/

  Can it help

• Delete the Linux partition and now cannot start PC

  Hiya,

  I had partitioned my HD to a disk of windows xp and linux by car. I deleted the Linnux partition using the application for the removal of a partition in windows. I cannot start my computer now. When I turn on my PC, I get the screen toshiba with all the small icons and then what follows:

  Intel Boot Agent GE v1.2.45
  Copyright (C) 1997-2007. Intel Corporation

  PXE - E61 Media test failure. check the cable
  PXE - M0F: exit Intel Boot agent.
  error: no such partition.
  grub rescue >

  I do not have my recovery as I am overseas at the moment. What can I do? I use a friends pc to write this. The sick PC is a laptop.

  I'm not very computer chip - so if you are kind enough to answer for me, please speak slowly and use easy words ;-)

  Van
  Shaari

  Hello

  You can download the Setup from the Microsoft page of WIindows disk:
  http://support.Microsoft.com/kb/310994/

  Then you could install the Microsoft recovery console that helps you use the commands * Fixmbr and Fixboot * to fix the Boot Manager:
  http://support.Microsoft.com/kb/307654/

  I think this should help other rational use the Live like BartPe or WinPE disc to boot up the laptop.

• Satellite L300 - 16L: bootmgr image is corrupt. the system cannot start

  Bootmgr image is corrupt. the system cannot start

  Why is this?

  Have we lost all files etc on the laptop?

  Its a Toshiba L300 - 16L 'versatile Base '.

  Any help would be great - thanks

  Wayne

  Well, the system on the HARD drive seems to be corrupted.
  Who knows why, but it happens sometimes, it s nothing unusual and, therefore, it s always recommended to backup the data always

  The files are not lost, but you are not able to start the unit.

  What you can do?
  Well, you can grab the laptop again.
  By using the HARD drive recovery option (press F8, repair my computer, drive HARD recovery) or by using the recovery disk

  But this will format the HARD drive and you will lose data.
  If you want to get access to the data, I recommend booting of live CD WinPE and BartPE.

  Google for more details...

• Re: Satellite L310 - cannot start from the HARD disk

  Hello

  My L310 just died on me yesterday. My system just can not start, not even in Safe Mode. And it keeps trying to start using my network card, not through hard drive.

  I put the BIOS default settings, but it does not help.

  And she has this tone to loud continuous beep when it tries to start using the network card. A continuous beep, even on the screen of the BIOS and in safe mode.

  I chose the hard drive manually, but he keeps trying to start through the network adapter.

  And the laptop does not meet the keyboard. Even with a keyboard external usb. When I sometimes managed to boot my system on the rare occasion, I get to the login screen and cannot button my password.

  Does anyone have similar problems?

  Let me know. Thank you!

  Looks like your HARD drive is defective. BIOS recognize it?
  You should test the disk with Drive Fitness Test. Download the CD image, burn it to a CD and boot from it:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT

  Check this box and give us feedback. Maybe the HARD drive needs to be replaced.

  On the keyboard issue it is not easy to say what are the causes of the problem, but in the worst case that he should be replaced also. :(