Cannot switch from catalogues

Similar Questions

• T510 4313CTO 3100 M Nvidia cannot switch from integrated and discrete?

  T510 4313CTO Nvidia3100M cannot switch between integrated and discrete?

  I only have the Nvidia card on my T510. I didn't know you could have both. When I ordered, it was one or the other. ???

• Cannot switch from Windows Vista to Windows 7 because have to uninstall Launcher welcome

  When upgrading from Vista to Windows 7, I get this message:

  "The upgrade of Windows will affect the devices or programs below:

  These programs may not work properly after the upgrade. We recommend that you uninstall these programs before upgrading. Cancel the upgrade, open Control Panel and search for "uninstall a program". (Note: programs marked as * can be reinstalled securely after the upgrade.)
  • "WelcomeLauncher *"

  WelcomeLauncher is not listed under programs.  Where to find it?

  Hello

  What brand / model of the computer?

   
  Let us try both methods listed below to uninstall the Launcher welcome.
  Method 1.
  Check out the link and use the Fixit to find the welcome launcher and uninstall
  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall
   
  Method 2.
  You can navigate to the programs folder and uninstall this program from there. See the article below for more information.
   
  Uninstalling programs: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/uninstalling-programs-frequently-asked-questions
   
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
   
  And if you use a Sony's Vaio computer you can also see the thread below.
  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/6545f2b3-e822-4C8D-b4a9-6a4d63d9957f

• cannot switch from php to actionscript 3.0 variables

  I use CS3 and I write the following code to pass the variable to Flash from PHP

  ActionScript

  var myLoader:URLLoader = new URLLoader();

  myLoader.dataFormat = URLLoaderDataFormat.TEXT;

  var myRequest:URLRequest = new URLRequest ("http://localhost/moodle/value.php");

  myLoader.load (myRequest);

  myLoader.addEventListener (Event.COMPLETE, onCompleteHandler);

  var myValue: String;

  function onCompleteHandler(e:Event):void {}

  var $myvariable: URLVariables = new URLVariables (e.target.data);

  myValue = myvariable.values;

  trace (MyValue);

  }

  PHP file

  <? PHP

  ECHO ('values = 8');

  ? >

  But I always have the error and can not get the values using trace();

  Until I try to use 'myLoader.dataFormat = can;' I still get the same error.

  : Error #2101: the string passed to URLVariables.Decode must be a query string URL-encoded containing name/value pairs

  to Error$ /throwError)

  at flash.net::URLVariables/decode()

  at flash.net::URLVariables$iinit()

  at flash.net::URLLoader/flash.net:URLLoader::onComplete()

  Can someone help me?

  Rewrite your PHP...

  <>

  echo "values = 8;

  ?>

  edited: deleted information about different display

• Cannot switch from start screen

  Regardless of how, whenever I try to open an old file or creates a new file, Photoshop flips always return to the start screen.

  This is the case if I start on the start screen, Essentials or photograph - a short film of the image and then back to the start screen.

  I disabled start screen as defect in general preferences, but it did not help.

  I can't use Photoshop in my work at all.

  I will be extremely grateful for any help.

  -Frédéric

  Hi Terri,

  Sorry to bother. I think this was my mistake. Did not have the screen resolution set, he was flicking off the power.

  -Frédéric

• Dictionary for spell check in Outlook Express is in French. Cannot switch to English. Any ideas?

  Dictionary for spell check in Outlook Express is in French. Cannot switch to English. Any ideas?

  You no longer have the correction spell checking capabilities in some languages in Outlook Express 6.0 after you install the Microsoft Office 2007 or Office 2010 system
  http://support.Microsoft.com/kb/932974
   
  Outlook Express cannot use the check spelling of MS Word in Office 2007 or newer. A free spell-checking the download is the easiest way to get around this.
   
  Vampirefo spell check.
   
  Download from Major Geeks:
  http://www.MajorGeeks.com/download.php?Det=2952
   
  Or upload it to SnapFile:
  http://www.SnapFiles.com/get/spelloe.html
   
  You wanted TinySpell or. (Check spelling while typing).
   
  Download it here:
  http://www.tinyspell.M6.NET/ 
   
  Australian English spell checking
  (Also suitable for other English speaking countries).
  http://www.justlocal.com.au/clients/oespellcheck/ 
   
  If you have an earlier version of Office, see this:
  http://www.Outlook-tips.NET/archives/2006/20061228.htm

• How can I switch from 9.3 to 10 iOS iOS? I m getting an error when I install it

  How can I switch from 9.3 to 10 iOS iOS? I m getting an error when I install it

  Kareems, how are you trying to install? Live? Or from iTunes. You can connect your phone to your computer and launch iTunes and have iTunes download and update the phone.

• If I switched from IE to Mozilla Firefox should I keep IE installed on my computer?

  I switched from Internet Explorer to Mozilla Firefox browsers. I need to uninstall unnecessary programs to increase space on my computer. I can uninstall IE without losing important documents? All my favorites seem to have passed on, however I'm not sure because it has not been done manually. Is this possible?

  Hello, DESA, you seem to be windows xp ad - internet explore is integrated deeply into the operating system, so it is not possible to remove it at all (this option was only added by microsoft in later versions of windows).

• Cannot restore from a backup

  I cannot restore from a backup and don't know why.

  I have a Crucial SSD of BX100 in my mid 2010 MacBook Pro. It is divided into two partitions. I got Snow Leopard on a partition and Yosemite on the other. For some reason any I've never understood the Snow Leopard guarded beachballing partition. This happened if often that I decided to wipe the disk and reinstall from my backup, do it before the beachballing began to occur.

  But I can't restore. I wiped the drive of a Snow Leopard system, repaired and reformatted. The drive is not Core Storage, this is Mac OS extended (journaled). When I try to restore the restore on it works for about two minutes and then stops. Finally, I get a message saying that the disc has been ejected incorrectly.

  I noticed that when I receive information on the drive, an element appears different from other readers and which corresponds to the element, owners enabled: no each other drive I've seen says owners enabled: Yes. Is it all just because there is no system on the partition?

  Also "ignore ownership on this Volume" must be checked or unchecked?

  Suggestions welcomed, I am baffled by this.

  Snow Leopard erase and install

  1. Insert the Snow Leopard DVD in the optical drive and restart the computer.
  2. Immediately after hearing the chime hold down the C key.
  3. Release the button when the Apple logo appears and wait for loading to complete.
  4. After the installer loads, choose your language and click on the continue button. When the menu bar appears select utility drive in the Utilities menu.  After disk utility charges select the entry out-bumpy in the list aside (mfgr. size ID and disc drive.)  In the right side of the disk utility window, click the Partition tab.  Set the number of sheets to (1) on the menu drop down. Click the Options button and select GUID, click on OK, the value of the Mac OS Extended journaled format type. Finally, click on the apply button.
  5. Once the format is complete, quit disk utility.  Continue with the installation of OS X and follow the directions.
  6. Once installation is complete, the computer will restart in the installation wizard. After completing the Setup Wizard, you will use a new installation of Snow Leopard. Open the software update and install updates recommended.
  7. If you plan to sell or to give to your remote computer, then proceed as follows: once you reformat your hard disk and reinstall Snow Leopard, the computer restarts with a welcome screen. To leave the Mac in a State OOTB (Out Of The Box), do not continue with the Setup program. Instead, press the command and Q keys to stop the computer. The installation wizard will guide you the new owner through the installation procedure, after that it turns on the computer.
  8. Download and install Mac OS X 10.6.8 v1.1 updated Combo. If necessary. It is not necessary if you are selling or giving your computer away.

• HP Pavilion 500-210 QE cannot boot from any hard drive.

  Good evening. As you can see on the subject, my computer just cannot boot from any hard disk that I put on it. I tried swapping the power supply, SATA cable, reset the BIOS, allowing the start legacy, changing to AHCI to IDE and RAID...

  When I get to the BIOS Setup, I see the hard drive and its features, but it will not start or show when I am trying to install a new OS. I'm not an expert, but I think that the problem could be in the motherboard SATA ports, but I'm not sure. Just to be sure, I tried another harddrive and it did not work as well.

  I was also thinking to buy a HDD external and installation of my OS on it, but I don't even know if it is possible and I would really like to have my computer working again.

  Thank you for your attention!

  Ok. That doesn't say that it is very likely that the motherboard has problems.

  Contact HP for warranty repair.

• Can satellite M40x-183 - I switch from XP to Windows 7?

  Is it possible to switch from Windows XP to Windows 7 on my Toshiba Satellite M40X-183?

  Hello

  Theoretically, you can do everything, but you know how old your laptop is? In my opinion Windows 7 isn't the first choice for good old classic. It of designed for Windows XP and you should be satisfied with this OS.

  In my opinion, Windows XP is the best choice for old books, that they are not designed for Windows 7.

• Cannot print from Firefox 3.6.13

  Cannot print from Firefox. 3.6.13. says it's printing, but only a blank page comes out of the printer. Safari works fine, but I like Firefox. With the help of Mac 10.6.5.

  Probably caused by a Bug in Firefox, which is supposed to be fixed in versions of Firefox 4.0. Until Firefox 4 is out, my suggestion is to use the preview before printing and if the preview is empty use Safari to print this page. This extension will allow you to click right into Firefox and open the same page in Safari, so you don't have to copy' only paste the URL.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/open-in-Safari/

• Sony Vaio VPCY2190X. Can I switch from Windows 7 to Windows 10 factory?

  Sony Vaio VPCY2190X. Can I switch from Windows 7 to Windows 10 factory? Page Web de Sony info is not clear to me on the issue of whether I can do it again.

  On the right side, he is saying

  DO NOT UPGRADE YET.

  To ensure that your VAIO PC works with Windows 10, it is strongly recommended that you wait to upgrade your PC until the drivers are ready.

• Satellite A200 - cannot boot from the recovery disc - code 1

  I have Vista business and my laptop is running slow and is full of rubbish.
  I have in the past used my drive recovery to completely re - install vista and start from a fresh version.

  However, I tried this once and it says that it cannot boot from cd - code 1.

  Can someone tell me what it is and how to reinstall vista?

  Hmm. strange.
  Are you sure you have the right recovery disk?
  Are you abele to boot using another drive as MS Win XP CD or Linux CD bootable?

• Satellite M45: Cannot boot from the CD-ROM or HARD drive

  I get the following messages...

  WHEN BOOTING FROM HDD: "Invalid partition table".

  At the START of the CD: "No Bootable CD in ATAPI CD-ROM.
  By so, even though I have the recovery CD and the computer can not read them.

  I tried to change the order of boot without result. Created a bootable CD Bart, who works in my other computer, but not in this laptop. Are there special drivers, I need for this CD?
  I'm out on this one.

  Thank you

  Hello

  I think that your partition on the HARD disk is damaged and so you cannot boot from the HARD drive.
  In this case, the HARD drive must be formatted completely and then you could try to install the OS.

  It seems also that your drive cannot recognize the CD bootable (WinXP?) and, therefore, it of not possible to boot from the drive.
  Well, it really stupid s :_| situation really stupid!

  However, did you try to boot from another CD? For example Microsoft Windows original CD?
  If not I recommend you to do and eventually the reader will be able to read the CD.
  If this isn't the case, so I think that the reader must be checked. Possibly it also corrupted s.