Cannot use Illustrator CC 15 after update on Windows 10.

Similar Questions

• Dynadock U3.0 - cannot use the Ethernet port after update 8.1 Win

  Hello world

  I use a u3.0 dock Dynadock with my Vaio PCS 13.
  I'm not able to use the Ethernet port on the Dynadock since I updated my Windows 8.1 device update 1.
  Before that everything worked well.

  I'm not able to re-install the drivers correctly (tried 7.6m0, 7.5m2). While the game driver tries to start, I get an error message, Setup is not able to put a bunch of registry (SYSTEM\CurrentControlSet\Services\DisplayLinkGA\D evice1) keys (up to 0). (Image 1)

  If I ignore these messages and do not install the driver, the Ethernet port will not installed in Device Manager. (Image 2)

  If I try to install the driver manually (DisplayLink network adapter NCM), I'll get an error message that a driver has been found but that access has been denied. (Image 3)
  I started the safe mode and could install the driver. But if I reboot in normal mode, the machine could not be started.

  I also tried to disable UAC and I am logged on as administrator 'real '.

  Please find the attached messaged (in German) error:

  [picture 1]: http://picload.org/image/lcalwop/toshiba.png
  [Picture 2]: http://picload.org/image/lcalwoc/toshiba2.png
  [Picture 3]: http://picload.org/image/lcalwlg/toshiba3.png

  BTW: If I unzip the Installer (7.6m0) and install * inf for the good Fri & dev (4503) it still does not work...

  I put t know what to do anymore...

  Hello

  After upgrade to 8.1 Windows, you should also update the software/driver Display Link
  This is very important!

  The latest version of the driver can be downloaded here:
  http://www.DisplayLink.com/support/downloads.php

  Note: the old version must be removed!

• Cannot use the recovery CD after update BIOS on Tecra 9000.

  Failed to retrieve the system (Windows 2000) after update BIOS on Tecra 9000. Recovery CD says "it's a bad machine. Can I go back to old BIOS? Another solution?

  Hello

  Maybe chain can confirm, but I put t he seems the best idea to mix stuff designed for laptops Americans and Europeans models.

  Can you please confirm if the method described in the previous ad works?

• Portege M700: Cannot use the fingerprint reader after update for Firefox 3

  Hey

  I have a Toshiba Portege M700 Tablet and with the truesuite software on a fingerprint reader and password Bank plugin.

  It's all working fine and dandy with firefox 2.
  Then last night I went and updated for firefox 3 and now I can't log in to Web sites with the fingerprint reader.

  No error messages, nothing. I can say that the truesuite or Bank password software is not detecting firefox 3. I've updated to the latest version that I could find, 2.0.2.0.

  I found this thread by telling me the process of update of firefox it breaks and I should completely uninstall and reinstall firefox, which I did.
  That didn't fix it.

  Then I completely uninstalled and reinstalled truesuite. That did not help either.
  Its still broken.

  Anyone know a workaround or a way to fix this, or should I wait and see if there is an updated version of the password database? (I find it unlikely because this isn't really a standard program)

  Hello

  I think that the new Firefox version is not fully tested and possibly it s not completely compatible with the 3rd party applications.
  I remember the same problems with older versions of firefox. Finally, it has been resolved.

  But why you don t use internet explore? As far as I know the fingerprint works without a problem

  In any case if you want to continue to use the browser firefox 3 so I think that the only solution is to wait for an update.

  Concerning

• Cannot use the FN keys after upgrade of Windows 8

  Hello

  I just upgraded to Window8 and find the FN key does not work and I can not change the brightness of the screen or function keys.

  Please notify

  Read another thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=69003

  You must install VAP to win 8

• iPhone 5 volume cannot be reduced with (-) button after update to 9.3.2

  Volume cannot be reduced with button after update to 9.3.2

  Can increase the volume with button until the max volume.

  Cannot lower volume in any application that has sound.

  This on the iPhone 5 with iOS 9.3.2

  Try a Reset: press and hold the sleep/wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears. -Note: no data will be lost

• Cannot record music on ipad after update to IOS 9.3.

  Cannot record music on ipad after update to IOS 9.3. In the view 'now playing' I could tap on the title that opens a window where I could score 1-5 stars. Now by tapping on the title just changes the display of the album. What can I do? I would be very unfortunate if I could rate is no longer my music while listening to it on the IPad. The 1-5 star rating still works in Itunes, but it is a great help for me. Thanks for help.

  Try this below the steps it will work!

  You must press the title to bring up the option enter a star...

  Once it is visible, touching it will bring back the title most of the time and allow entry only part of the time.

  "need to press the title of music playback and the rating stars will appear."

• ASUS laptop computer: touch screen does not work after update of windows 10

  My touch screen does not work after update of windows 10 in Chrome. How can I fix it?

  Hello

  Welcome to the HP support forum. Asus and Chrome are not HP, touch screen works on my machine HP with IE, Firefox and the new browser Windows 10 called Edge. I think that you need to update to Chrome.

  Kind regards.

• HP Pavilion TouchSmart 14-n013: touch not working after updates on Windows

  Hello

  My touch screen stopped working after updates of Windows on my laptop froze. I went through all the parameters of the pen and touch, and others to resolve this issue, and unfortunately it still does not. I also rebooted the laptop to factory settings and update all the necessary things in the software updated and updates on the HP site recommended and I've updated the BIOS, but still the touch screen does not work.

  I hope you can help.

  Thank you

  According to the message that you have recently published, I want to confirm that this could be a hardware problem and I highly recommend to Contact HP immediately technical support by phone for further assistance immediately to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

  You can also check your warranty here to check the status of the guarantee

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• HP Color LaserJet MFP M176 Pro: No printing on HP Color LaserJet MFP M176 Pro after update of Windows 10 anniversary update

  My HP Color LaserJet Pro MFP M176 does not print after update of Windows 10 anniversary update. I've updated two computers (HP Compaq Elite SFF 8300 and E6320 Dell), Hp with 2013 installed Office and Dell with Office 2010 installed. The printer is connected to my network. The latest "complete solution drivers' HP was installed before the upgrade. Printer does not printer-> Printtest properties, error notification appears and asks me if I want to troubleshoot the error. I can see the printjob in the spooler, but it is immediately deleted. Does not print any programs I've tried, with the exception of the notebook HP Print and Scan Doctor! When I troubleshoot with Windows printtroubleshooter, no problems found. Same thing with HP print and scan the doctor.

  I uninstalled all the drivers and the Hp programs, rebooted and installed "drivers complete solution." Same problem!

  On the Dell computer, I made a new clean install of Windows 10 Anniversery update, from a USB key. Office 2010 installed and 'full pilot solution again'. Same problem!

  On August 18, 2016, I found new drivers on Hp. new downloaded web pages "complete solution drivers still" uninstalled all the drivers and the Hp programs, rebooted and installed "drivers complete solution." Same problem!

  Among the many solutions, I tried turning the firewall. No help.

  I know that brother Corp has sent an email to their customers, there are big problems with their printers/drivers and the anniversary 10 Windows Update. Same problem with Hp printers/drivers?

  Someone who has a solution?

  Hello!

  Thanks for your suggestion of a solution!

  First of all, it fixed my problem of printing when I tried with a new user on both computers. Yet, I was a little confused that two updates and an installstion clean "updated anniversary" should lead to a curropted user profile!

  Then when I did what I always be with new computers/users, to the environment variables 'TMP' and 'TEMP' C:\Temp for the new user. Printing stops again. Extract a little more and found that users on C:\Temp needed to be 'total control '. 'Change' was not enough. Perhaps one of the new things in birthday update?

  In any case, there where the pleasure with your help!

• USB mouse does not not after update. Windows detects that usb is connected

  after update to windows 8 my usb mouse stopped working drivers are up to date and clean. tried turning off then turning, resettlement, but nothing does. After a few minutes that its connected it also plays the "detected usb device" then removed "usb device" ringtone It can be connected to my problem.

  Hello

  Thanks for the info and sorry for the late reply.

  I suggest you to run the Microsoft fixit and see if it helps:

  Diagnose and automatically fix the Windows USB problems

  http://support.Microsoft.com/mats/Windows_USB_diagnostics

  Please reply with the results, in order to help you solve the problem.

  Thank you

• will I get support for HP after update of windows 8?

  I want to upgrade to window 8 (64-bit) Windows 7 (64-bit), will get assistance from HP after update of windows 8?

  Hello

  Please see the following article:

  http://support.HP.com/us-en/document/c03451712

  Kind regards.

• Cannot use or restore Vista after SP1 uninstall

  original title: cannot use or restore after uninstalling SP1 Vista - please help.

  In order to perform an upgrade of Vista installation to repair the damage caused by a virus recently, I uninstalled Service Pack 1 (because installation upgrade will not work with SP1). I know there are other things I should have done (a sfc/scannow in theCommandPrompt) or SP1 slipstreamed DVD, but I did not know them at the time, nor did I think there will be problems as a result of an uninstallation of SP1. As the title suggests, I got kind of wrong.

  It all started after uninstallation, which seemed successful. I rebooted, and instead to get Vista without SP1, I get an error code of the variety of the command prompt (just the black screen with white writing). This continues for a couple of times, and after a few remedies attempts that fail miserably, I decide to systemrestore(using the Vista CD, of course) at a point before uninstalling SP1. I think it will work, but the first time, as it gets to the "development of restoration" and how he hung for three hours before, I decided to turn off the computer because he was of course not moveable anywhere. I restart and let the boot from HARD drive upwards to see if maybe something worked, and I get to the login screen of Vista, how I notice none of my devices work. The mouse or the keyboard responds (both are USB) and the attempts with the PS/2 versions don't either. I thought maybe it was a driver problem, so I reinstalled the driver chipset at the disk using my laptop (took thedesktopHARD drive, put in a box outside, then executed the installer of the chipset on my laptop and said to install outside driver), but it could not solve the problem. I also tried other restorations, but invariably they fail after a certain point, which gives me an error message:

  "System restore failed due to an unspecified error. The file could not be opened from a transactional point of view, because its identity depends on the result of a unresolved transaction. (0x80071AA7).

  I googled errormessageand see that most people encounter it while trying to install a service pack, I thought it was a problem with restoring Vista without SP1 to Vista SP1. Thusly, I used the command from theVistaCD command-line option to read my Windows Update log and got the following:

  "2010-07-09 04:44:32:593 664 29 c Misc = logging initialized (build: 6.0.6000.16386, tz:-0800) =".
  2010-07-09 04:44:32:593 664 29 c Misc = process: X:\windows\system32\Rstrui.exe
  2010-07-09 04:44:32:593 664 29 c Misc = Module: X:\Windows\system32\wuapi.dll
  2010-07-09 04:44:32:593 664 29 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 04:44:34:605 664 29 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 04:44:36:617 664 29 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 04:44:38:630 664 29 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 04:44:38:630 664 29 ch. COMAPI WARNING: failed to connect to the service. (hr = 80040154)
  2010-07-09 15:26:30:160 216 12 c Misc = logging initialized (build: 6.0.6000.16386, tz:-0800) =.
  2010-07-09 15:26:30:160 216 12 c Misc = process: X:\windows\system32\Rstrui.exe
  2010-07-09 15:26:30:160 216 12 c Misc = Module: X:\Windows\system32\wuapi.dll
  2010-07-09 15:26:30:160 216 12 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 15:26:32:172 216 12 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 15:26:34:185 216 12 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 15:26:36:197 216 12 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 15:26:36:197 216 12 ch. COMAPI WARNING: failed to connect to the service. (hr = 80040154)
  2010-07-09 16:04:19:912 356 Misc 3 b 0 = logging initialized (build: 6.0.6000.16386, tz:-0800) =.
  2010-07-09 16:04:19:912 b 356 3-0 Misc = process: X:\windows\system32\Rstrui.exe
  2010-07-09 16:04:19:912 b 356 3-0 Misc = Module: X:\windows\system32\wuapi.dll
  2010-07-09 16:04:19:912 b 356 3-0 COMAPI FATALE: unable to connect to service (hr = 80080005)
  2010-07-09 16:04:19:912 b 356 3-0 COMAPI WARNING: failed to connect to the service. (hr = 80080005)
  2010-07-09 16:18:08:745 532 248 Misc = logging initialized (build: 6.0.6000.16386, tz:-0800) =.
  2010-07-09 16:18:08:745 532 248 Misc = process: X:\windows\system32\Rstrui.exe
  2010-07-09 16:18:08:745 532 248 Misc = Module: X:\windows\system32\wuapi.dll
  2010-07-09 16:18:08:745 532 248 COMAPI FATALE: unable to connect to service (hr = 80080005)
  2010-07-09 16:18:08:745 532 248 COMAPI WARNING: failed to connect to the service. (hr = 80080005)
  2010-07-09 16:25:53:894 976 244 Misc = logging initialized (build: 7.4.7600.226, tz:-0800) =.
  2010-07-09 16:25:53:894 976 244 Misc = process: X:\windows\system32\Rstrui.exe
  2010-07-09 16:25:53:894 976 244 Misc = Module: X:\windows\system32\wuapi.dll
  2010-07-09 16:25:53:894 976 244 COMAPI FATALE: unable to connect to service (hr = 80080005)
  2010-07-09 16:25:53:894 976 244 COMAPI WARNING: failed to connect to the service. (HR = 80080005) »

  I can't interpret it, although it seems to confirm my suspicions the transition from other than the SP1 and SP1 is causing issues. If someone else could interpret this?

  Basically I have a non-functional operating system, I can not restore it to a State of operation, nor access the input devices because it does not work on the login screen. Anyone all proposed solutions to the problem, short of a clean install of Vista? I don't want to reformat unless absolutely necessary.

  This is the forum Vista install.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/threads

  You can try the repair Forum.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot share contacts via SMS after update to IOS 10.0.2. Can only share w contact email. Any suggestions for a fix so I can share contacts via text msg?  Have 6SPlus

  uogradee iOS 10.0.2. The new 6SPlus. Cannot use "share contact" w. "Share contact" text works only E-mail w. Any suggestions on how to get "share contact" "I work text msg w? Worked before detected to 10.0.2 last week great.

  Hi gpp123,

  I understand that you are not able to select the 'Message' option after choosing the option of 'Sharing of Contact' in the Contacts application. I'm more than happy to help.

  If you haven't done so already, please restart your iPhone and this new test to see if you are still unable to choose the option of sharing via a message. You can find more information on it here:

  Restart your iPhone, iPad or iPod touch - Apple Support

  Once you have finished, try to test with other contacts to see if you can reproduce the problem. It can also help to try to create a new contact to test with. Once you're done, let us know the outcome of the tests.

  See you soon!

• OfficeJet 5745: Cannot print after update of Windows 10

  I've updated to Windows 10 and now have problems printing.  Help!  I've done all the troubleshooting, coil status stuff!  I'm used to be able to print from the internet, scanning to my computer or email and print wireless from my phone.  I now can not print anything!  I tried to install Windows updates.  Should what printer I configure default network or regular?  Use the printer pdf microsoft thing?  I am desperate... saved my bank statement online (pdf) to my documents and it would not print the Bank or my documents!  Before this I had problems after that my hard drive crashed and I got a new hard drive.   When my hard drive crashed I was using WINDOWS 10 and everything on the big printer worked; they sent back with new hard drive on windows 8.1 and I had I thought that the upgradew would solve the questions.   I could print and scan but no wireless for my phone on the new HDD in windows 8.1 and upgrade to 10 thought would solve my problems, but now it's worse... Help!

  Hi @savra,

  If your computer is connected to the printer on a wireless network, you do not want to send print jobs to the network printer.

  Here is a support document to help with printer after Windows 10 upgrade problems - after Windows 10 Upgrade, printer problems occur.

  Aside to make sure Windows updates are up to date, there are a few other updates that can help with printing.

  Microsoft has released an update that is supposed to help with wireless printing - Cumulative Update for Windows 10.

  There was also an update for Adobe Flash Player in Internet Explorer and Microsoft Edge who can help get this impression of your bank's site - Update for Adobe Flash Player.

  Please let me know how it goes.

  If this helps you find a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!