Cannot use local shared with replica storage of SSD

Similar Questions

• I downloaded the new version and it says: you cannot use this application with this version of Mac os how can I download the older version?

  I downloaded the new version and it says: you cannot use this application with this version of Mac os how can I download the older version? My os is 10.4.11

  You can read this article: Firefox no longer works with Mac OS X 10.4 or PowerPC processors to read about the EOL for Mac 10.4 support and what the best options going forward.

• Cannot use iTunes Radio with my new Apple ID HELP!

  Help!

  cannot use the radio with my new id

• Cannot create folders shared with VMware Fusion Pro 8

  Just updated to VMware Fusion Pro 8 and having problems of shared folders. Although the Win 7 Pro system is the area of our society, he is unable to see other computers (apart from himself) on the network. I am also unable to share folders the with the Mac OS. I followed the instructions a few times below and failed to make it work:

  Windows

  To configure a shared folder in a Windows virtual machine:

  1 launch VMware Fusion.

  2. turn on the virtual machine.

  3 click on Virtual Machine > settings.

  4. click on sharing.

  5 in Fusion 7.x, select enable shared folders. Molten 6.x, 5.x, 4.x turn files option ON the Shared. In Fusion 3.x, select shared folders on your Mac option.

  6. click on the button +.

  7 navigate to the folder on the Mac which will be shared with the virtual machine and click Add.

  Shared folders are accessible via the shared folders shortcut on the Windows desktop or the network Z: drive VMware.

  Does anyone know how to fix this?

  Thank you!

  Looks like it was too easy to install "VMware Tools". Seems to work now.

• Homegroup in windows 7 32A printer - another PC with win7 64 bit cannot use the shared prinetr

  HP Photosmart C4680 - 1 PC running windows 7 32 bit PC 2 printer and PC 3 I running windows 7 64 bit - this unable to print.

  Special on 3 PC's VmWare workstation - virtual stand-alone created with 32-bit windows - these virtual PC has no problem help

  shared printer to PC 1.

  I have the feeling - bad driver 2 PC and PC 3, bur how do I change driver

  Hi kridres,

  Have you tried to use the base driver for Win 7 64 bits on the link below.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-68434-4&CC=US&DLC=en&LC=en&os=4063&Product=3739150&sw_lang=

  See the following information about the printer share.

  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

• Cannot use recovery DVD with my Satellite Pro A300D

  When I arrived at my laptop set up the way I like it, and I created a recovery disk which took the 2 DVD s.
  Then Vista started to slow down a lot so I decided to use the disc and everything started to go well then he asked for two drive and it came with an error message saying that the file was missing to complete the Setup program couldn't t.

  So now I can t get in the menu to restore it to the State when I had and the disks that I don t work.
  Any help is appreciated.

  Thanks in advance

  Hello buddy

  It is badly located now. Please try to do it once more.
  If the same thing happen there is nothing you can do. I'm not an expert for this kind of thing, but I noticed the image recovery recovery DVD will be copied to the HARD second partition disk) first and then the installation of recovery will go from there.

  If the adaptation procedure is not done on the recovery of end procedure cannot be started.
  Sorry buddy. In my opinion, you can try to contact the nearest authorized maintainer and explain the situation. Take the DVD created as evidence and maybe they will order new media for free.

  Good luck!

• Cannot use the scanner with Lion

  Hi, I just upgraded to Lion, then in v2.1 the All in one C7280 driver using the menu of updated apple softawe.

  The printer works fine but when I swtich to the scanner, it returns the following message:

  HP Scan cannot be opened because of a problem.

  Check with the developer to make sure that HP Scan works with this version of Mac OS X. You may need to reinstall the application. Don't forget to install the updates that are available for the application and Mac OS X.

  I could try to reinstall the driver but I do not know where apparently no longer in the software update list.

  Thank you for your help

  Stone

  Hi Pierre,.

  The HP Scan is not compatible with Lion, currently the scan software is provided by Apple Software Update and will allow you to scan by using the dialog box Print & scan (located under system preferences), Capture of Image or Preview (both located under Applications)

  Please specify if you can scan using these applications.

• Cannot use a pfx with no password file in a KeyManagerFactory

  I have a pfx file that contains a private key and a corresponding self-signed certificate. The file pfx itself is not protected by a password. I can't use this pfx file to initialize a KeyManagerFactory to establish a SSL connection.
  
  Here's some code that shows what I'm trying to do:
  
  InputStream ksStream = ResourceReader.getResourceAsStream ("< pfx-file-location-on-file-system >");
  Char [] password = null; given that the pfx file has no password on it
  Keystore keyStore.load (ksStream, password);
  
  KeyManagerFactory kmf is KeyManagerFactory.getInstance ("SunX509", "SunJSSE");.
  KMF.init (keystore, password);
  
  This operation fails with this exception:
  
  java.security.UnrecoverableKeyException: Get Key failed: / by zero
  at com.sun.net.ssl.internal.pkcs12.PKCS12KeyStore.engineGetKey(PKCS12KeyStore.java:270)
  at java.security.KeyStore.getKey(KeyStore.java:763)
  to com.sun.net.ssl.internal.ssl.SunX509KeyManagerImpl. < init > (SunX509KeyManagerImpl.java:113)
  to com.sun.net.ssl.internal.ssl.KeyManagerFactoryImpl$ SunX509.engineInit (KeyManagerFactoryImpl.java:48)
  at javax.net.ssl.KeyManagerFactory.init(KeyManagerFactory.java:239)
  at jsse.common.JsseSample.createKeyManagerFactory(JsseSample.java:294)
  at jsse.common.JsseSample.createKeyManagerFactory(JsseSample.java:306)
  at jsse.server.Simple.runSample(Simple.java:81)
  at jsse.server.Simple.main(Simple.java:57)
  Caused by: java.lang.ArithmeticException: / by zero
  at com.sun.crypto.provider.PKCS12PBECipherCore.a(DashoA13*..)
  at com.sun.crypto.provider.PKCS12PBECipherCore.a(DashoA13*..)
  at com.sun.crypto.provider.PKCS12PBECipherCore.a(DashoA13*..)
  at com.sun.crypto.provider.PKCS12PBECipherCore.a(DashoA13*..)
  to com.sun.crypto.provider.PKCS12PBECipherCore$ PBEWithSHA1AndDESede.engineInit(DashoA13*..)
  at javax.crypto.Cipher.a(DashoA13*..)
  at javax.crypto.Cipher.a(DashoA13*..)
  at javax.crypto.Cipher.init(DashoA13*..)
  at javax.crypto.Cipher.init(DashoA13*..)
  at com.sun.net.ssl.internal.pkcs12.PKCS12KeyStore.engineGetKey(PKCS12KeyStore.java:251)
  ... 8 more
  
  This code works fine if I set a password for the pfx file, and then use this password to load the keystore and then use in the KeyManagerFactory.
  
  My question is: why can I not use a pfx file that doesn't have a password on it?
  
  Thank you
  R.
  
  Published by: 907570 on January 12, 2012 01:01
  
  Published by: 907570 on January 12, 2012 01:18

  The actual code used to extract the key private key file is in the sun.security.pkcs12.PKCS12KeyStore.engineGetKey () method and the private key decryption code fragment OpenJDK version

                 SecretKey skey = getPBEKey(password);
              Cipher cipher = Cipher.getInstance(algOid.toString());
              cipher.init(Cipher.DECRYPT_MODE, skey, algParams);
              byte[] privateKeyInfo = cipher.doFinal(encryptedKey);
  
              PKCS8EncodedKeySpec kspec = new PKCS8EncodedKeySpec(privateKeyInfo);
  

  There is therefore no conditional autour decryption he always tries to generate a PBE key, even if no key is scheduled and then decrypt with it. Of course, it could be a password less pfx file actually has a default password, there must be a request for change (PKCS12 perhaps) that covers it, but I bet that means really that without encryption is done. Assuming that the PVE in JDK1.7 code differs little of this and that have no password really means that there is no password so that there will be no way in which we can use the Sun provider to access the private key.

  Like you, I found that BouncyCastle can handle this situation but if you really cannot work with BouncyCastle then the only alternative I can think of (that do not required a ton of code to write) is to use OpenSSL to change the pfx to a default password password. If all the machines that use your installed OpenSSL code it could be done within your Java ProcessBuilder using code. Not very attractive, I know, but given that the PVE cannot handle the password less pfx files you have to use a very attractive solution.

  Published by: sabre150 on January 13, 2012 12:28

  To create a new pfx file with a different password seems to take two OpenSSL commands: -.

  OpenSSL pkcs12 - in cert.pfx - by fred
  followed by
  OpenSSL pkcs12-export - in fred-out fred.pfx

• Re: Cannot use remote control with my Satellite P20

  I just got hold of a PSP20E and the remote control (2 of them) does not work, the light blinks but that's all. When I try to set up in the Media Center settings, I get the message unable to detect the remote sensor.

  I was told by the previous owner it was working, the only thing I've done is to adapt to a new DVD (TEAC DV-W28E) player and loads of recommended Windows updates. The BIOS version is 1.6 and I'm under Win XP MCE (sp2). Any ideas would be welcome.
  Either by the way, I write a BIOS updated on a CD, or do I have to buy a floppy drive?

  Hello, Alan

  I used Satellite P20 over 2 years and I never noticed any problem with the small remote control. I guess you bought second-hand laptop and in my opinion, the first things you need to do is install the OS via recovery CD.

  When the laptop to factory settings, you must test the operation of the equipment, in particular the use remote control. Recovery image is designed so that everything should work. If this isn't the case, it may be just because of a malfunction of the equipment. As I've already said I used this laptop long enough and never noticed any problems.

  To be honest I didn t make updates because the BONE was very well set up. As I said, you can test it with recovery image.

  The BIOS update you need floppy drive.

• Cannot use the webcam with chat programs - Satellite A200-AH7 Vista

  Satellite A200-AH7/Vista Home Premim/Chicony USB 2.0 built in webcam

  I can't understand how get the audio works with built in chicony webcam when in a chat program or any program for that matter. I can record audio and reading later, but this isn't what I want to do. It's probably just something stupid that miss me... but any help would sure be appreciated... I tried with Windows Live and Yahoo messenger, and so far all I can do is wave to people LOL. I was never able to get it to work... any ideas?

  Today I bought a Logitech Quickcam for notebooks in case the problem is with the construction in camera. I don't want to install it unless absolutely necessary and think I would need to uninstall the Chicony to make it work... someone can point me in the right direction?

  I just want to be able to talk to my grandchildren...

  Thanks in advance,
  Sue

  Hello

  He is a Canadian for Toshiba laptop model.
  Please see the Toshiba Canada Web site to get the right webcam software:

  http://209.167.114.38/support/TechSupport/ln_TechSupport.asp

  First remove the old webcam software. Reboot the laptop. Clean the registry and the system using the CCleaner (it of free). Reboot the laptop again one and then install the new software of webcam!

  Welcome them

• Cannot use wireless LAN with my Satellite Pro A100

  Toshiba Satellite Pro A100-830
  NETGEAR DG834G

  Can not use the Wi - Fi connection. When you use "Free Config" to find peripheral wireless the popup "this connection is controlled by other software. I don't know what that means and what software controls the connection. I have other laptop which is duly connected by wireless. I'm ok with wired connection.

  I don't know much about the technical aspects and therefore ask for help so any reader can.
  Thank you
  Kris

  > Can't use the Wi - Fi connection. When you use "Free Config" to find peripheral wireless the popup "this connection is controlled by other software.

  You may not use the ConfigFree for configuring Wlan but own Vista configuration options or the WLan configuration tool like Atheros Clint Utility or Intel ProSet utility. It depends on the WLan card which utility can be used.
  Card Intel-> Intel ProSet utility; Card Atheros WLan-> Atheros Clint Utility

  I guess the message + this connection is controlled by other software + appears because one of the above options controls the WLan.

• Cannot use the mouse with the laptop wireless

  I just bought a laptop. I bought a wireless mouse, but I don't know why it won't let me use it.

  Hello

  1. What is the brand and model of the mouse?

  2. What is the brand and model of the computer?

  3. what operating system you have installed in the computer?

  I suggest you follow the steps described in the methods to solve the problem with the wireless mouse:

  Note: the instructions are applicable to Windows Vista and 7.

  Method 1:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  Bluetooth devices. Bluetooth devices, the steps may be a bit more detail, and you will need to follow the steps listed in the documentation provided with the device. For additional help with Bluetooth devices, see Add a Bluetooth device to your compatible computer deviceand Add a Bluetooth device or other wireless or network device: frequently asked questions.

  Please post back with the result.

• Cannot use Admin mode with the main user.

  One user, no PW with Admin properties but unable to launch the app, Hostess.exe, in administrator mode.

  It is the only program that you have problems with? If Yes, contact technical support of the program. What version of Internet Explorer you have installed? If you use IE8 you should be (IE6/7 are too vulnerable for use anymore), you really don't want in any case, the use of these «file managers» hosts IE8 has tightened security and using a third party host "file manager" as hostess or SpywareBlaster will actually slow things down because IE will need to list all entries first. There are better ways to manage the filtering of the web than to use a hosts file. One of the best ways is to useOpenDNS instead. It's free and extremely configurable. You can choose black and white areas list categories. If you let me know your situation and what you are trying to accomplish, maybe I can give you other suggestions too. Otherwise, contact the technical support of the hostess program or see if they have forums users for it. MS - MVP - Elephant Boy computers - don't panic!

• Cannot share local printer with a remote server via RD?

  I'm on Server 2003 at both ends of that connection. The local printer is a network printer in my office.

  Research on the Internet gives to think I should be able to go to Remote Desktop-> Options-> local resources and enable printer sharing by clicking on the "Printers" box under "automatically connect to these devices the when connected to the remote computer.

  However, this doesn't give me access to my local printer when I'm in a remote desktop session. What Miss me?

  http://TechNet.Microsoft.com/en-us/WindowsServer/default.aspx

  Repost nicely in the Forums to correct server at the link above.

  Here is the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot use the WebGL with PlayBook frame buffer

  I went through the lessons on http://learningwebgl.com/lessons/, but could not get the demo 16 lesson to display on my PlayBook (OS 2.1.0.840). I find myself with an empty white canvas. The demo works fine in Chrome. According to the Documentation of WebGL Blackberry , I think that the functions of WebGL used in the demo are all supported. According to the web Inspector, there is no error on the page.  Does anyone know why it does not display the Web? My guess is that the problem revolves around a problem memory frame buffer that I was not able to get any frame buffer code to render on the PlayBook. Anyone used framebuffers successfully on a PlayBook?

  Thank you!

  Hello.

  Are you a person performs the lessons in the browser or they packaged in an application? I tried here, with the PlayBook on OS 2.0.1.358 and it seems to work well in the browser as shown in the screenshot below. The first was the notification that the page uses WebGL, so I need to give permission and then it worked really well on the device!