Cannot use the mouse after installing windows 7

Similar Questions

• Cannot adjust the brightness after installing Windows 10

  Hello. I have a Dell XPS 15 L521X.   Recently updated to Windows 10 and I can adjust is no longer my brightness upwards or downwards.

  Now the screen is quite low.  I'd say about 30-40% brightness.  10 widows I found about 5 different places to adjust your brightness and I made sure all of them have been set to 100%.  I have my power plan to high performance and I went into advanced settings and turned off Adaptive brightness and made sure that the brightness of the screen the two Dim brightness set to 100% on battery & are plugged.  Rebooted and still dim.

  My question is, on Dell laptops, Windows has full access to the brightness control?  Or Dell replaces Windows with their software customized for the display settings?   When I bought this laptop in 2012, the software, at the time, was called Dell QuickSet.  What is the responsible application of brightness of the screen control?  And is it necessary?

  Thank you

  Mike

  I am also having this same problem. My brightness has been set at max after update and it hurts my eyes. I did it... Control Panel > Device Manager > graphics cards > Intel HD Graphics 4000 > pilot > Update Driver > Browse my computer > let me pick. Choose Microsoft Basic graphics card.

  After doing this, my problem was solved, and I was able to adjust the brightness of my screen again. BUT if you play games on your laptop, it will cause display problems in your game.

• Error message: Ethernet is not a valid ip address configuration and cannot connect to the Internet after installing Windows 8.

  Original title: Internet not working after installing Windows 8. Help, please

  I installed Windows 8 a week before, which had Windows Vista. When I was with Vista, I had no problem with the Internet, I had. But shortly after I installed Windows 8, the problem began. The connection is hardly 2 minutes. In addition, it is not navigate beyond my home page. After troubleshooting the result came as Ethernet is not a valid ip address configuration. It makes me really frustrated. After all, I was looking forward to navigate in windows 8, this problem makes me think really bad. If someone could help me, it will be grateful to you.

  Manorajan respected,

  I too had d same problem but I solved it later on myself.
  Here's how to: -.
  1-make sure you have intel network driver I installed your windows it pc. Download (on any other pc and transfer and install in it) and install it in your pc respective windows 8. Here is the link to download:-http://drivers.softpedia.com/get/NETWORK-CARD/INTEL/Intel-Network-Adapter-Driver-172-for-Windows-8.shtml
  Den DOWNLOAD realtek lan driver here to install http://drivers.softpedia.com/get/NETWORK-CARD/REALTEK/Intel-Realtek-LAN-Driver-80030730-for-Windows-8.shtml..if in the installation of theres no error ignore it... do not panic and reinstall... as it is already installed

  2 - unplug your LAN cable and Wi - Fi

  3 - go to network and sharing den center left side d click on change adapter settings clik left on the network card intel

  4-go to "Ethernet Adapter local area connection' properties and Deselect"Internet Protocol Version 6 (TCP/IPv6) "

  "5 - Select" ""Protocol Internet Version 4 (TCP/IPv4) '

  Press the properties button

  6 - Select "use the following IP address:" option and set this ips

  IP = "ip address".

  subnet mask = 255.255.255.0

  default gateway = your ip from the router (you can recheck all say on any other pc having a successful conection even wid tell by checking the properties of dial-up connection or any smart phone like any iphone or android mobile, if it is used as a wifi too in led staus/properties to your respective wifi name)

  7. in the second section select "use the following DNS server address:"

  Set "Server DNS PreferAlternate:" your router ip that entered u in "default gateway of" this. " pinterested ok and try to connect in wireless lan

• Users on the network cannot use the files after upgrade to Windows 10

  When I switch to win 10 people on the network cannot use the files on my computer

  Hello

  Thanks for posting your query on the Microsoft Community.

  With the description, I understand that you have problems with network connectivity and access files on network on your Windows 7 machine. I will certainly help you to the query.

  I would be grateful if you could help me with more information to better understand the problem and a solution:

  1 is this computer connected to a network domain or home?

  2. what exactly happens when users on the network try to use/access files on this computer? Do they get an error message/code?

  In the meantime, I suggest you refer to the below mentioned thread and check if this is useful:

  http://answers.Microsoft.com/en-us/Insider/Forum/insider_wintp-insider_web/Windows-10-network-file-sharing/18fba63e-7b6c-46FE-BA23-575a634fcee8

  Hope this information is useful. Please write us back with the required information for assistance, we will be happy to help you.

• Cannot use the mouse to copy and paste using firefox21

  Hello
  When I use my browser firefox21 and use the mouse to select text
  I would like to copy then right click on the mouse and select copy
  Then, the highlight on the text disappears and won't let me copy and paste using the mouse

  I tried to reset firefox is default - and still have the problem
  I don't have any addons installed - I did a scan for malware using malwarebytes and erase all the shows

  I also did a clean reinstall of firefox and still have the issue of copy and paste

  I tried another browser chrome and has not had the problem with the mouse

  Is this a problem with the browser firefox 21

  Thanks - Steve

  This happens on all sites, or only on certain sites?

  Some sites may have "copy" scripts that change what happens when you right-click. To prevent sites from pre-empting the normal context menu of Firefox, try the third "Advanced JavaScript" setting described in this article: JavaScript and their preferences for interactive web pages settings (uncheck the third).

  Does make a difference?

  (Incidentally, I noticed on the threads in Google groups if you select widely, the selection is cleared when you do a right click, but if you select a little less, it is not clear.) I have not studied the model in detail).

• Computer OS used to start after installing windows 10

  Hello im having problem starting my system after installing windows 10. I did the install and it worked fine since the upgrade to 8.1. But then I tried to format the drive and in the menu format, he's stuck at 2%, and then I restarted the computer. Now it will hang at the hp logo and go back to the same logo. Do I have to replace my hard drive?

  What I understand, if you have completed the 10 Windows Installer and everything has happened until the end, then you are supposed to be able to do a clean install with the download of Windows 10 DVD or USB.  With a working computer, GO to THIS PAGEand scroll down to the button "download tool" selection the 64-bit version.  Once clicked, it will ask you if you want a DVD or USB for the iso.

  Once it's done and you have the DVD or the USB version, see if you can install Windows 10.  If this fails, you may need to replace the hard drive.

• cannot use the CD to install the printer. Series of HP Office Pro 85 A909g

  Cannot use the CD-Rom installation disc to install the printer.  Series of HP Office Pro 8500 has 909 g.  I need to know if I can download what I need to do my printer works.

  Visit the hp product page: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=3752459
  Select the operating system of the computer and download the driver software.

• Strange behavior of the mouse after installing the updated driver

  Hello

  Windows Update suggested that I update the mouse and/or the keyboard driver detection. I don't remember the exact message.

  Also, I find no trace of this update in the box "Installed updates". It seems that the driver updates are not included.

  Symptom: Periodically, the screen scrolls upward around 3 lines, even through I'm even not touching the mouse. It's like the wheel was scrolled beyond a tick.

  This has never happened before this update of detection has been installed.

  Windows 64-bit Enterprise, USB Intellimouse Optical 1.1

  How can I find the update has been installed? How can I remove it?

  Thanks - ankle

  Hi MaskedAnkle,

  Thank you for using Microsoft Windows forum.

  If you want to see the updated story to update try the following steps to check the update has been installed for programs.

  1. open the control panel (all items view), and click the Windows Update icon. (See screenshot below)

  2. click on the link to view update history. (See screenshot below)

  3. to view the details of a single Windows Update-

  (A) select and right-click on a Windows Update list, and then click details. (See screenshot below step 4)

  (B) click on close when finished. (See screenshot below)

  4. to copy the details of an update of Windows unique to Clipboard-

  (A) select and right-click on a Windows Update list, and then click details.

  NOTE: It will be the same details in step 3, but in a text format instead.

  (B) you can now copy the contents of the Clipboard (ctrl + V) in a program such as Notepad or WordPad.

  If you think that the problem occurred after the installation of the update of the driver, you can restore the mouse driver and check if that helps.

  Steps to roll back a driver:

  #Open Control Panel Windows Device Manager.

  Manager #In of devices, look for the device that you want to restore the driver.

  #After find the material you are roll back the driver, right click on the name or the icon of the device and click Properties.

  #In the properties of the device window, click the driver tab.

  #On tab driver, click on the button return to the previous version.

  Note: If the button return to the previous version is disabled, Windows 7 doesn't have a previous driver to roll back to then you will not be able to complete this process.

  #Click the button Yes to the question "Are you sure you want to restore the driver previously installed software?".

  We now find the driver already installed. You should see the button return to the previous version is disabled when the roll back is finished.

  #Click the close button at the bottom of the screen of the device properties.

  #Click Yes in the system settings change dialog box that says: "your hardware settings have changed. You must restart your computer for these changes to take effect. You want to restart your computer now? »

  If this message is hidden, the close window command panel might help. You will not be able to close the Device Manager.
  
  Note: you are according to the device driver roll back, it is possible that you will not need to restart your PC. If you
  do not see the message, consider the complete rear roller.

  #Your computer will now restart automatically.

  When Windows 7 starts up again, it will load with the device driver of this material that you had previously installed

  You can also try the system restore if the problem persists,
  See: http://support.microsoft.com/kb/936212/

  Hope this has helped

  Kind regards
  Aziz Nadeem - Microsoft Support

• Activation of the AHCI after installing Windows XP on Satellite L300-19Y

  So, I picked up this laptop used which has Vista installed on it. I got rid of him, but being not able to install XP I put the laptop in compatibility mode and then installed without problem until I relealised I need to install the SATA drivers as performance was not that great. So I found a way that is similar to many others on the internet just slightly different.

  It works for the controller intel which will have the model in the title. Its the controller ICH9M-E/M that I used this method with.

  # Go to the Intel website and the location of the chipset you have. With this model is the series 4 and select Windows XP as OS. (http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Chipsets& ProductLine = cell + Chipsets & ProductProduct = Intel Mobile + % C2% AE + 4 + series + Express + Chipset + family & ProdId = 2991 & LineId = 1088 & FamilyId = 40)
  # Download the drivers from RapidStore F6. It will come in a ZIP file that you need to extract. There will be a series of files in this
  # Then open device under ATA/ATAPI IDE right-click controllers Manager > properties for your controller. She should have ICH9 in the title. And then click driver > update driver
  # The wizard opens, don't go on the internet, press Next, then select install from a specific location > don't search, I will choose the driver to install. Click Next, and then click Have Disk
  # And then navigate to the folder where you extract the files and select the file iaAHCI.inf. It will bring up a list of driver files, you should select one that suits. For the listed model, it will be pilot ICH9M-E/M that will work. Select it and it will install. If it's the wrong file, you will get the BSOD immediately.
  # Restart the computer, go into the BIOS change to AHCI. Then start Windows, it should start. If you have the BSOD, then return to testing and compatibility mode method, but select the iaStor.inf file again.
  # Once the computer has started, launch the Intel Matrix Storage software to make sure that the power is saved. We can say that you replace the file with an older, just replace it for now, so that the registry database is correctly updated. Then after rebooting, use the Update Driver Wizard using the new driver. This has worked well for that day and will result in that you don't have to reinstall the entire operating system to get the drivers
  I found the computer started much faster. The process is similar for all Chipset Intel machines, you just need to make sure that you are able to choose the correct driver.

  Thanks a lot for this interesting publication, naza911. Nice to hear that enabling AHCI works after XP installation.

  This thread is useful for other users of L300 I think or let's say ;) for all computers with AHCI and Windows XP

• Cannot use the mouse with the laptop wireless

  I just bought a laptop. I bought a wireless mouse, but I don't know why it won't let me use it.

  Hello

  1. What is the brand and model of the mouse?

  2. What is the brand and model of the computer?

  3. what operating system you have installed in the computer?

  I suggest you follow the steps described in the methods to solve the problem with the wireless mouse:

  Note: the instructions are applicable to Windows Vista and 7.

  Method 1:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  Bluetooth devices. Bluetooth devices, the steps may be a bit more detail, and you will need to follow the steps listed in the documentation provided with the device. For additional help with Bluetooth devices, see Add a Bluetooth device to your compatible computer deviceand Add a Bluetooth device or other wireless or network device: frequently asked questions.

  Please post back with the result.

• Cannot use the Bluetooth Dongle with Windows 7

  Hello

  I recently bought a Bluetooth USB Dongle (Esperanza BLUETOOTH v2.1. EA101) (not a best buy, but defiantly a cheep one).

  I can confirm that it is 100% functional and working. As I tested it on the other PC with Windows 7 (x 64) and my Linux machine.

  I can't put it up to work with my PC at home.
  I have goggled. Found that my Bluetooth support Service has been leaning and I started it and set to start automatically rebooted computer and plugging the unit.

  Plug-and-Play installation Bluetooth CSR chip driver. (even can be downloaded from the manufacturing site).

  I'm still not able to use the device. When I enter the Bluetooth settings if I make changes it says that my camera is unplugged.

  While on the other PC I tried to plug and play also installed/implementation following things that were not installed on my PC at home:

  (Heading RFCOMM Protocol TDI) Bluetooth device

  Microsoft Bluetooth enumerator

  Device Bluetooth (personal area network)

  The advice I am missing sth?

  I can provide any other details necessary to demand

  Hello

  Method rather than the above helped.

  After trying them I managed to solve the problem in an invasive way more.

  The solution that worked:

  I have re installed my Windows, updated with all Windows updates and installed the latest drivers.

  (My previous instance of Windows 7 was updated with updates and drivers)
  After that, I started Bluetooth Support Service and set it to automatic. Restart the PC, plug in the device and ALL the drivers installed automatically (including the)

  (Protocol RFCOMM TDI) Bluetooth device.

  Microsoft Bluetooth enumerator,

  Bluetooth (personal area network) device)

  Thanks for your comments

• Unable to connect to the internet after installing Windows 8 Pro

  I installed Windows 8 Pro on my laptop, but I can't connect to the Internet. When I diagnose the problem, it can not find the problem. I use a computer dell laptop. The notification on the corner of the Office says I'm connected. I use a wifi that works fine as I can connect my iPad with it. Can anyone help?

  Hello

  Thanks for posting your question in the Microsoft Community.

  I understand that you can not connect to the Internet after the installation of Windows 8 Pro operating systems. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. you receive an error code or message?

  2. what web browser do you use?

  3. don't you try to connect to a wired connection?

  4. What is the Dell laptop model number?

  Please follow the methods and mark the question below:

  Method 1:

   

  Step 1:

   

  Start the computer in safe mode with network and check if the problem persists by following the link below.

  Start settings for Windows (including safe mode):

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  If the problem does not persists in Mode safe mode with networking, and then perform a clean boot.

  Step 2:

   

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

   

  Method 2:

   

  Follow the steps in the link below.

   

  Wireless and wired network problems:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  Method 3:

  Follow the steps described in the links below.

   

  Why can't I connect to the Internet? :

  http://Windows.Microsoft.com/en-us/Windows-8/cant-connect-to-Internet

   

  A Wi - Fi & networking:

  http://Windows.Microsoft.com/en-us/Windows-8/connect-Internet#1TC=T1

   

  For reference:

   

  Connect to the Internet:

  http://Windows.Microsoft.com/en-us/Windows-8/connect-to-the-Internet

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Cannot use the network after the first time backup volume machine

  Hello

  After the update to OS 10.11.4 my MACs are unable to use the network backup volume more.

  The volume of time machine is a device (RAID of LCM InXtron Taurus-S) external USB connected to a server of iMac (also running OS 10.11.4). Four MACs use this device as a backup time volume machine (all systems 10.11.4).

  What I've done so far has been clear the volume (twice) and rename with different names than in the past. Than I started the new backups for all of my MACs. The fist backup works fine for all machines. After it says, that the first backup is over, and he tries to perform the second backup an hour later, it is said that the volume does not support the necessary functions of AFP.

  I am still able to connect to the volume via afp: / /... If the finder (go to). As long as I use the volume for a single machine works. If I announce a backup from another machine, it evokes this error.

  Any suggestions?

  Thanks in advance.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the 'Start-up' (without the quotes). You should now see messages in the log with the words "departure * backup," where * represents one of the words "automatic", "manual" or "standard".

  Each message in the journal begins with the date and time when it was entered. Note the time stamp of the last 'Start' message that matches the start of a normal backup. Now

  DELETE THE WORD 'Start' TO THE TEXT BOX

  so that all messages are showing and highlight the newspaper at the same time, you noted. Select the time-stamped messages since then until the end of the backup or the end of the log if it is not clear. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  If all you see are messages that contain the word 'Start-up', you clear the text field.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. Don't post any more it is requested.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Satellite A300-1EG: problem with the touchpad after installing Windows 7

  Hello!

  I had a problem with my touchpad since I installed Windows 7 (64-bit version) on my laptop (Toshiba) A300-1EG.

  I tried many different solutions to this problem.
  I checked the alignment of the touchpad (be it on) in the BIOS, I tried to install several drivers (on a site of Synaptics, automatically by Windows) and none of these work. Of course, I tried FN + F9 key combination.
  When I check the alignment of the touchpad in the Control Panel, everything seems fine. It is written, that "device working properly.

  I have Toshiba Software, what may be the cause of the problem?
  But I have no idea where I can find something.

  I'd appreciate any help.

  I hope to be understandable - English is not my mother tongue :) Thank you very much in advance for any ideas. :)

  Hi mate

  I'm not quite sure what problem you have but you should first try to install the necessary drivers touchpad m.
  Maybe you used the wrong driver in the past

  So Sat A300-1EG belongs to the series of PSAG4E.
  The European driver Toshiba page does not provide a special touchpad driver for Win 7 for this device.

  But I noticed that Win 7 64 bit drivers touchpad (Alps & Synaptics) for Satellite L500 PSLS3E series is released on the European driver page.
  Try both drivers Touch Pad for this device and test it!

  Welcome them

• Cannot use the network after using McAfee antivirus with removal tool

  Original title: Mc McAfee antivirus more removal tool damage my network cards after that I use it, what do I do? McAfee tech say that they are not responsible.

  MC McAfee antivirus more removal tool damage my network cards after that I use it, what do I do? McAfee tech say that they are not responsible. After removing the software and restarted, computer cannot connect to the net (device manager shows problems with NIC miniport McAfee mc?).

  Hello

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You can't connect to the network after McAfee antivirus using more the removal tool to remove McAfee software.

  The network drivers is maybe damaged.

  1. What is brand and model computer?

  2. What is error right messagee you receive in Device Manager?

  To confirm that the problem is with the driver, do us reinstall the driver:

  a. click Start, click Run and type devmgmt.msc and press enter

  b. now right click on the network card and uninstall it and restart the computer.

  You can also get the latest version of the driver from the manufacturer.

  I hope this helps. If the problem persists, let know us and we would be happy to help you.