Cannto run System Restore: 0x8000ffff error code

Similar Questions

• Cannot create 0 system restore point error code 80070057 x

  Hello

  Please help me with this error:

  Today, when I do a manual create a system restore point, I received the following message "could not perform scheduled task for the following reason: parameter is incorrect." I do a sfc/scannow, but the process has frozen the audit of 100% and has not given any results. I have also uninstall the antivirus software and redo the creation but without success. Please let know me what I can do?

  Thank you

  Negis

  Hello

  Sorry for the late post. I don't try to back up or restore. I just want to create a restore point.

  Netherless, I followed the advice on this thread http://social.technet.microsoft.com/Forums/en/itprovistasecurity/thread/37160397-349e-4aa2-992e-1ffe58b5e51e and renamed the SR file in %windir%\System32\Tasks\Microsoft\Windows\SystemRestore to SR.sav and can create restore points successfully. So I create a restore point, a new SR file is created adjacent to the old (SR.sav)

  However, is it to let the SR.sav file remains in the folder or just delete it? Is it possible that renaming some files to offset it later?

  Please kindly answer. Thank you

  Negis

• can not backup files to restore the system to receive error code 0 x 80070005

  Original title: can not save the files in system restore

  > error message... a shadow copy could not be created (0x80070005).

  Hello

  Disable the security software and activation of Volume Shadow Copy and backup service can help in performing a backup.

  Check the steps suggested by Sandeep GNT from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/Vista-Home-backup-0x80070005/4558119a-73d6-4C18-9a95-8ae484678586

  Good day!

  Answer please if you face concerns.

• "Restore failed, error Code 1117

  I'm doing a system restore on a gateway nv 79 with the backup disc, I did when the computer was purchased.  I get all the way up to 86 percent brand and get "restore failed, error Code 1117, not able to perform due to an i/o error."  I can get nowhere excpet the F2 screen, so I don't know what the problem

  Hello

  ·        You did changes to the computer before the show?

  ·        You are able to boot to the desktop in normal mode?

  Method 1: If you are not able to boot to the desktop in normal mode then I suggest to start in safe mode with command prompt and run the disk check to the following address:

  CHKDSK X: /R

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Reference: Startup options (including safe mode) advanced

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Method 2: follow the instructions from the link to fix the problem:

  Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."

  http://support.Microsoft.com/kb/952272

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

• Update for Windows 7 for x 64-based systems KB976264 80242014 error code

  Hello

  I use Windows 7 x 64 system. I have a problem with the "update for Windows 7 for x 64-based systems KB976264" 80242014 error code and the status "pending to be" appear next to him. I think that the update has been installed in part because whenever I'm turning off the computer there is a message "system is preparing for configuration" and when I turn the configuration but still start, it stops when it reaches 35 percent. The computer restarts and then there is another message that the configation was not successful and the changes are in return.

  I tried to install the update manually from the Windows Web page but there is always an error code that the update is not available for my computer, even if I download the version which should be compatible with it.

  Could you please tell me how to reinstall or uninstall the update not to be bothered by my computer restarts every time that I turn it on?

  Thank you

  Hanah,
  Take a look at this article and try the troubleshooting steps in this regard.  Let us know the results.  Also, check the update history and see if there are other error codes.

  You can also perform these troubleshooting beginning steps.
  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations of KB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Restore failed - error code = 0 x 241

  I'm trying to fix Acer Aspire 5552-7803 friend and ended up having to order a set of recovery disc for $20. The problem is that when I try to launch the restore of the default factory, he charges through the first two recovery disks, then on the third, I get an error message that says "restore failed - error code = 0 x 241 (WIMApplyImage impossible to apply the image: Windows cannot verify the digital signature for this file.). A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or that could be... "The rest is obscured by the box and you can't scroll to read.

  I've read several posts that say they had the same problem, but have yet to find a real solution. I completely cleaned the disk and did a 'Clean' on diskpart with a Win7 repair disc. It is possible that the disc is damaged, but with the accounts that I have seen, I would not buy a new drive and then find out that the drive wasn't really the problem.

  I could really use some suggestions. Help, please.

  Thank you

  I think I finally found the problem. I tried to install an evaluation version of Windows 8 and got a slightly different, but the similar error message and google it. The first instance of the problem that I found was a solution, saying that the guy has discovered that he had a bad memory stick. I removed one and retried the recovery disks and it always failed. I swapped the memory stick and tried again, and now I'm almost finished with the full reload. I think that was the problem and I'm hopeful that we're back in business... Now to make shopping for memory.

• HP Officejet Pro X476dw. Message: problem with the printer or ink system. 0xc6fd0213 error code

  HP Officejet Pro X476dw purchased June 2013.  Windows xp operating system.

  Printer does not.  In a "print order" function, by modem or button copy to printer, gives me the error message: the printer failed.  There is a problem with the printer or the ink system.  0xc6fd0213 error code.

  Sometimes spits out a blank sheet of paper.

  Hi people, as @Bryan_P has said - Please contact the HP support by phone on this error message. The below listed phone numbers...

  http://welcome.HP.com/country/us/en/wwcontact_us.html

  Can you please post back to let us know how you go?

  Thanks, Ciara

• Error code Windows Update 800700 B & System Restore 0x80071A91 error

  Cannot install critical system updates.  Download the update error 800700B.  Manually and through MS FixIt ran the command fsutil resource setautoreset to clear/clean line newspapers.  Has not fixed the problem.  Through research found related error on the system restore.  Am unable to create a restore point and 0x80071a91 error.  A run the command-line recommended by MS to address, cd /d %SystemRoot%\System32\SMI\Store\Machine
  attrib s h *.
  del *.blf
  del * .regtrans-ms

  and get an access error:
  C:\windows\system32\smi\store\machine\schema.dat{d3e605ee-4C71-11de-be3f-001d609310af}. TM.blf
  The process cannot access the file because it is being used by another process

  Any ideas?

  Currently no anit-virus software, but recently (within 2 months) not uninstalled Mcfee... I'll try to get more details from the owner about the software was previously installed Antivirus

  You don't have to bother. This is not good. :(

  See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista#section_3

  After the new installation, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network and before using a USB (flash drive) or the SD card that is not brand new, or has not been freshly formattedotherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application. [1]

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  ==============
  [1] I recommend Avira AntiVir & Microsoft Security Essentials (both free) and NOD32 & Kaspersky Anti-virus (not the "suites").

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Get code error when running Windows Update. Error code: 57.

  Original title: "57 error code"

  When I update my windows vista family premium I get the message
  How to solve this one?

  Hello

  1. did you of recent changes to the system before the show?

  2. What are the news that are listed in the Windows Update?

  Method 1:

  Follow the link below and run the patch tool, check to see if it helps.

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  Method 2:

  Follow the link below, perform the steps and check if it helps.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Important : this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  In addition, check out the link below and check if it helps.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Let us know if it helps.

• Windows 7 backup system Image - 0x8078012D error Code - fails to complete system image backup?

  I seem to have a problem with the Windows backup when a scheduled backup image on a hard drive external fails to finish, although she worked successfully before many times.  Backup Windows reports an error code of 0x8078012D.

  I ran the tool of error checking on the external hard drive with running repair options, but no problem discovered.  The external disk drive seems ok because I use a Norton program to back up data on the same drive with no problems.  Also Windows backup will happily make a 'non-system image' backup on the external drive.

  But it is not an image of the system stand alone, or as an add on the a normal backup.

  Any advice?

  Thank you
  David

  After many tests on the solutions listed here, I found a way to fix my problem. I had continually failure is to say the system could not create a snapshot or that my drive has been a failure. It seems, with Windows 7, you must configure options that are not obvious to the users.

  1. go to control panel/system/System Protection and select your C: drive.

  2. Select "set up" and make sure "Restore system settings and previous versions of files" is on.

  3. the Max use value at least 2%

  4. apply

  5. Select your key USB you will use for backup and configure it again to the protection and the whole file size of at least 18%.

  6. apply

  7. in the control panel go to administrative tools, open Services.

  8 scroll down until Windows backup and make sure it is set to manual and not started.

  9. highlight Volume Shadow and make sure it is also set to manual and not started.

  10 10 aller go to control panel, select backup and restore.

  11. click on "Change settings", and then select the drive you will support up to.

  12 run backup let the system do its thing and everything should work.

• Cannot run system restore

  I tried a few hours back to my lap top back to an earlier date using "System Restore". Every time it seems it will work, but it is not however there is an error code I have: oxcooooo22. I tried to search that with no luck at all. I wonder if I'm doing the right to the procedure. If someone would care to give me a hand I sure would appreciate it, I need a method step by step instructions, because I am a novice to this. Thanks in advance for your help and response.

  Sincerely

  gogoplex52

  Hello Gogo,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem can occur because of damaged or missing Windows files, or as a result of a software conflict or drivers.

  I suggest to do a restore of the system in safe mode and check if it helps.
  Reference:
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  If this does not help, run the system file checker (SFC) and then try to restore Windows.
  Reference:
  Use the System File Checker tool to repair missing or corrupted system files
  https://support.Microsoft.com/en-us/KB/929833

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  Note: when you use system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Problem with Audio and cannot restore. Error code 0 x 80070002.

  Have a Gateway FX 6860 under Windows 7 Home Premium.  Audio worked fine in the morning but in the afternoon (no updates being installed), I noticed that the sound speaker in the start bar had a red X.  Thought I had cut the sound, but the button mute on the keyboard had no effect (any more than the volume upward or down keys).  Roll the mouse on the icon gives "no speakers or headphones are connected.  Tried researching this issue after trying to restore the system (System Restore did not complete with each available computer restore point was [gave me every time the error code 80070002 x 0]).  I tried to uninstall and reinstall the device driver (no effect), I tried my repair disc (nothing), run a sfc/scannow (results indicate that there is no corrupted files).  I have connected my ipad for output wire to test the speakers (integrated in HP 2009 monitor) to check the wiring and speakers (they worked).  I ran the antivirus (AVASTI) software with no results.  Before that I have to empty everything and recover the system; is there anything else I could try?  Don't want to go through the entire re - install everything systematics for something simple.  What I forget?

  Hello

  Thank you for the update.

  You can try to install the drivers from the link below and see if that helps.

  Driver downloads &

  http://us.gateway.com/GW/en/us/content/drivers-downloads

  If this does not help then, try to perform the disk check and see if that helps. Run the disk check to find and fix errors on the disc.

  (a) click Start, type cmd, right-click cmd, and then click on run as administrator.

  (b) at the prompt, type chkdsk /f /r and press to enter.

  (c) try to do restore and check the result.

  For more information on 'Check a drive for errors' please visit this link:

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk be lost.

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• How can I get rid of the system DCOM 10005 error code?

  I will be working along and then I get the blue screen. In the event viewer it shows error code 10005 DCOM system and a computer error code of Service Control. This time, the # is 7026. They are different every time. But the DCOM # is always the same.

  Make sure that the Search Service is configured to start automatically in the Services Management Console (type Services.msc in the box run from the start menu).

  John

• cannot update the system... error code 80070005 appears?

  have tried several times to automatic update window system, but windows cannot verify the updates and the aboe error code appears... also tried the fix online tool without success... of advice would be appreciated... thanx

  One of the most common causes of this error code is the Anti Virus and Anti Spyware software running on the computer.

  You can try to disable them, and then try the updates again. Keep the firewall however.

  Recommendations for computers that are running Windows Server 2003, Windows 2000, or Windows XP Antivirus
  http://support.Microsoft.com/kb/822158

  How to reset security settings to default values
  http://support.Microsoft.com/kb/313222

• Internet not working not not despite running system restore every time start computer

  Unexpectedly, the internet has stopped working.  I used the standby computer and the internet went perfectly well.  I have not downloaded from the internet (rarely if ever) and we have McAfee Anti-Virus Spyware (and it showed no virus).  The only thing that gets the job of the internet is running a SYSTEM RESTORE.  But, when I shut down and restart the computer, the internet does not work until I run another restore of the system.  Help!

  Hello

  1 have you set Windows to automatically install updates?

  2. do you get an error message? If Yes, what is the full and exact error message?

  Method 1:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2:

  I suggest you to turn off the automatic update and restart the computer. See if you face the question:

  Activate the update or disable automatic

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-automatic-updating-on-or-off

  If the problem is resolved, try to install the updates manually one by one and restart the computer to see if an update is causing the problem.

  Let us know the results.