Internet not working not not despite running system restore every time start computer

Similar Questions

• can not get the system restore to work

  tried to get the system restore back to an earlier time. says I need to get rid of the useless programs.did who. I have also some icons for files, tools or downloads

  In addition to what has been mentioned, consider the following:

  First of all, what is the last time that the restoration of the system worked?

  Check your system restore settings:

  1. Click Start
  2. Right click on my computer
  3. Click on Properties.
  4. Click on System Restore
  5. If system restore is enabled, the column status of a player will show surveillance.
  6. If not, you can delete ""disable the system restore on all drives ' and then click on OK to activate "

  Is both as soon as you try to restore to the most recent available? If so, unless you have specific reasons to keep the previous restore points, clean the rest, so that you have the most recent restore point on the left.

  To do this:

  1. run Disk Cleanup

  2. click on more Options

  3. under system restore, click cleaning of

  4. click on OK

  This will free up the space. System restore needs a minimum of 200 MB of space to work.

  Reference: http://support.microsoft.com/kb/300044

  Hope this helps

  Post back if necessary

  _________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• CC is not opening after system restore

  I have download before and it worked fine, then I have system restore and re installed, no luck I tried to erase the files, nothing I tried to make a new profile and downloading there, nada this my third time here also last time someone said if they can take control of my pc to fix my pc died im here now some can please help me I want to open .it installs fine only when I delete the files the last time I installed it but it's not open, I just fix that Yes this versions trail - help please

  Try once with the steps below:

  Adobe end all processes from the Task Manager.

  Uninstall Adobe Creative Cloud app.

  Using creative cloud | Uninstall the creative cloud desktop application

  Step 1:

  Open the c: drive and navigate to C:\Program Files (x 86)------\Adobe " common files".

  Open the Adobe folder and delete folders named Adobe Application Manager and OOBE.

  Step 2:

  Navigate to C:\Program Files (x 86) \Adobe.

  Open Adobe file and if present the file to remove Adobe Creative Cloud . [* important]

  Impossible to remove? Rename it to Adobe Creative Cloud trees.

  Step 3:

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  AppData

  Then go to the Local > Adobe.

  Open the Adobe folder and delete folders named AAMUpdater and OOBE.

  Step 4:

  Make sure that Adobe Creative Cloud is not listed in the control panel > programs and features. list.

  Then, download and install the Adobe Creative Cloud app and check.

  https://ccmdls.adobe.com/AdobeProducts/KCCC/1/Win32/CreativeCloudSet-up.exe

• After many attempts computer will not allow the system restore. Received message is... Unspecified error occurred restoring the system durning

  After many attempts computer will not allow the system restore. Received message is... Unspecified error occurred restoring the system durning

  Hello

  If you use Norton, which could interfere with the restoration of the system.

  Disable Norton while doing your system restore.

  See you soon.

• I start my computer, but only get blue DELL screen. F12 or F2 gets me anywhere, does not. Put system restore disc, but still no luck.

  I start my computer, but only get blue DELL screen.  F12 or F2 gets me anywhere, does not.  Put system restore disc, but still no luck.

  Hello

  It looks like you have a hardware problem

  link below has the dells F12 diagnostics performance, BUT you can't get in this

  http://support.Dell.com/support/eDOCS/systems/WS340/en/UG/DIAGS.htm

  problem with the dell diagnostics the process and the process of recovery dell contact dell

  This is the diagnosis of the valleys and the recovery process not microsofts

  Dell support

  http://support.Dell.com/

  Dell support forums

  http://en.community.Dell.com/support-forums/default.aspx

• whenever I get the error message and I can not get the system restore or the automatic updates touch

  whenever I try to use the system restore I get the message that it was impossible to restore to dat what I ever try to restore any file were change

  more my automatic updates keep coming up it downloads according to the full upgrade, then the icon disappears, then comes back and he wants

  upgrading again any suggestions

  Hi chuckdutton,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. What is the reason for the execution of the system restore on the computer?

  4. do you have security software installed on the computer?

  5. you receive similar message appears when you try with different restore points?

  There are various reasons for the system restore fail on the computer.

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Also see the article below and check if it helps.

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  http://support.Microsoft.com/kb/302796

  Refer to the article below and try the steps mentioned, check if that fixes windows update icons that appear on the system tray.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

• Key board does not work correctly when you type. Can not get the system restore to work properly, either

  Tried to run the system restore, but it will not restore.

  Hey AnnEdelstein,

  Because you can't get the system restore to work, perform a clean boot on your Windows XP system. The guide to that is here. Which follow, and then try again to Outlook. If it works to the minimum, then boot in the boot, analyse the whole system with your Antivirus and other security you have.
  Also make sure you have the drivers for the keyboard. Search for the manufacturing of the keyboard, and they should have the drivers on their support site. I hope this has been helpful!

• SERIOUS PROBLEM! Help! Windows not working, Defender update do not update, missing system restore points...

  Someone please help! I am an intermediate user and I can't get windows update to work since December 4. I was on youtube and what you clicked on a link under a video, a Malware Removal window skipped upward and before I could do anything he disappeared since this happened, windows update does not work, (not KB972696) (error 80072efe code). I ran AVG, advanced system care and a multitude of online programs that say they will fix the problem with nothing doesn't. I tried to remove the "winhelp" virus last night by doing the hard and using regedit, but it did not help. I'll do anything to remedy. Can someone help me please. I am at a total loss about what to do next? I get a sign of malware/trojan removal of ad-aware and defender who said "onacokuhupotovun.dll_old" but he says it removed but it comes back. I get a pop-up from windows saying "a service host has stopped working and was closed" but soen can't say that. How can I return update still works once, then update of Defender and system restore points?

  I use an Intel core duo 2, E7500 2.94 ghz, 4gig of ram, Vista professional.

  Help, please!

  Hello
   
  Follow the steps mentioned below and check if the problem persists.
   
  Step 1:
   
  a. I'll get a scanner online using the link below and check if that helps eliminate malware.
  http://OneCare.live.com/site/en-us/default.htm
   
  b. you can also run a scan in SafeMode with networking online, which is known to be more effective in eliminating the virus/malware.
   
  Step 2:
   
  If possible, download and install Windows Security Essentials and run a full analysis of the PC (Personal Computer) in normal mode or safe mode .

  For Windows Update problem, you can follow the methods of the link below and check if the problem persists.

  http://support.Microsoft.com/kb/836941

   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Can not access the system restore.

  After the removal of a virus, no visible icons on desktop except Mcafee on the toolbar at the bottom.  Was able to access the internet by clicking on Mcafee and then update.  When you click Start the only visible program is Mcafee.  Cannot see the control panel or Windows help/support or anything else.  "Run" is not available.

  Someone suggested that if I run the system restore, it could solve the problem.  But the problem is that I can't access it in the usual way.

  Hi Oishi Kuranosuke,

  ·         Are you able to access the system restore in safe mode?

  ·         You get the error message?

  System Restore can bring back the virus.

  Follow these methods.

  Method 1: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 2: Create a new user account.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.

  How to copy data from a corrupted to a new profile in Windows XP user profile

  http://support.Microsoft.com/kb/811151

• Dell V313 does not print after system restore

  My apologies if I should have posted this elsewhere.

  I have a printer all-in-one Dell V313, using Windows 7, 64-bit. I really like the printer.

  I used the "remove IE11 update' to good use, and he continued to print well for about a month, until...

  My father ran a system restore point to solve another problem, and now I can print is no longer. DOH!

  I moved that pesky IE11 updated again, but this does not solve the problem.

  When I "Launch Dell printer at home", instead to open the main menu, a dialog box pop box, asking me if I want to open, save, or cancel the download to a temporary file named "DSX # .tmp", where # change every time.

  I opened it with notepad and this file seems to contain a rudimentary version of this main menu, but of course it is not interactive. (The home Dell printer menu is never responsible.)

  Another interesting note is that when I print something (does not seem to matter what program), the printer status area is not - what appears instead is a html file called jswdialog.html. This file is apparently empty.

  I made Java and run-time environment has been updated, just in case. I tried to remove all traces of the printer (by removing prints, queue, stop/print spooler, printer, uninstall drivers uninstall from compensation), and reinstall everything from scratch, right down to the firmware of the printer, but nothing will print when I ask him.

  Instead, it adds the work in file print, which then comes out after a reboot.

  The scanner function works of the printer itself, although this menu of the printer on the Dell home page will not start.

  Any suggestions? I must be missing something, but I don't know what. My last resort is to reinstall Windows, or reset whenever I want to print something, but I'd rather not.

  Thanks for reading,

  Matt

  Matt,

  Try these teak and see if it prints. If it's not I can guide you reinstall the printer, but printing or tasks that can be frozen in the queue will need to be removed or the problem would remain.

  Start, Control Panel, Manager of devices.

  Go to the section USB controller, and then click the plus sign +.

  Go to each USB hub root and right-click on it, on the left, click Properties, on the left, click power management. Uncheck the allow the computer to turn off this device to save power.

  Restart your computer.

  --------------------------------------

  Start, Control Panel, Manager of devices. Click Network and then right click on your wireless network adapter, on the left, click on properties, power management. Uncheck the allow the computer to turn off this device to save power.

  Rick

• My seagate backup more external hard drive not recognized after system restore

  I have a small sony vaio netbook running windows 7 starter edition. I did a system restore recently - saved on an external hard drive usb, nine 1 to seagate backup more - now after fighting with 124 updates hard disk is not recognized. Seagate has say the drivers are pre installed in windows. convenience stores never work - I find the trouble shooters are almost always useless - is this just me?

  It works on my laptop of friends - so im guessing it is the operating system reinstalled - what I do?

  Hello Neil,.

  First of all, we apologize for the late response.

  1. What happens, do not install the updates?
  2. What is the complete error message you get, when the update installs?
  3. What is the update kb article number?

  
  for problems with windows updates, run the tool in troubleshooting Windows Update:
  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter
   
  For the problem with the external hard drive
  Code 28 shows, the drivers for this device are not installed.
   
  Error codes in the Device Manager in Windows
  http://support.Microsoft.com/kb/310123/en-us
   
  Log in as administrator and then try to install the drivers
   
  How can I connect as an administrator?
  http://Windows.Microsoft.com/en-CA/Windows7/how-do-i-log-on-as-an-administrator

  S eaTools for Windows

  http://www.Seagate.com/in/en/support/downloads/item/SeaTools-win-master/

  Additional information:

  "Access denied" or other errors in the access to or work with files and folders in Windows

  http://support.Microsoft.com/kb/2623670/en-us

  I hope this helps. Please get back with the results.

• I can not access my system restore.

  When I click on the system restore, nothing happens. It is not on my Add / Remove programs. What can I do to get it back? Thank you.

  System Restore can be run in normal mode or safe mode.

  It is not located under the Control Panel Add/Remove programs.

  Instead it is located via the button start > all programs > Accessories > system tools.

• Browser crash, restart on its own, can not do the system restore. Help!

  OK, so I tried EVERYTHING I know how to do, and some things I did research.

  Whenever my computer restarts itself, I get an error message saying that there is a faulty driver.

  I checked my drivers with the audit tool, nothing.

  I uninstalled all unnecessary programs I could find (nothing critical, just programs like Glary Utilities, Acrobat, Flash etc..).

  Eventually I got to a point where everything I did was to get worse, and my computer told me that Windows did not start upward.  I rebooted in safe mode and tried to do a system restore.  Cannot restore point to restore I get an error indicating that the system restore was not successful.  I tried FOUR different restore points.

  I'm at my wits end!

  I don't have my Windows XP cd, or one of the disks with the computer came.  This used to be my computer at work, but let me keep as part of my departure, so all the disks are in the old company.

  Please help :(

  Computer: Dell
  Intel Core 2 Duo 2 G of RAM, Windows XP Professional

  (For some reason, the police in your post is a very light gray!)

  Please transmit the full text of the error message.

  You used the phrase "everything I've done." In addition to uninstall unused programs, what else do you have?

  If your company gave you this PC, they should have you good discs too. Fortunately, Dell XP Pro installation CD are ubiquitous and interchangeable. First of all, contact Dell to see if they can issue you a. Otherwise, see if anyone you know has one.

  A number of security (for example, Norton and Zone Alarm) programs interfere with the restoration of the system. If you identify your security programs, we can tell you how you can get the system restore to work. For now, these pages can help:

  http://bertk.MVPs.org/html/srfail.html

  http://bertk.MVPs.org/html/symantecdoc1.html

  You should be able to disable your restarts automatically in this way:

  http://pcsupport.about.com/od/tipstricks/HT/disautorestart.htm

  Finally, what is the status of this PC malware?

• System Restore ends, but my computer is not enter Windows

  The night after a last an update, my computer has stopped you connecting to Vista... it to be driven to a screen black white or said that it cannot be repaired automatically...

  Then, I hit F11 and perform a system recovery and choose a control point last night before the update. He finished and said he managed three times, but I still can't get in Vista...

  I'm not computer savvy, so any help will be appreciated... In addition, I don't have a recovery disk, Vista was already on my laptop when I bought it...

  Thanks again. Any help is appreciated...

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  You can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• all desktop icons not missing, run any command in the start menu, can't create desktop shortcuts

  All the desktop icons are missing, unable to create desktop shortcuts, without run command in the start menu... no info

  If system restore is turned on and you can go back enough, restore the computer to an earlier date using Safe Mode.

  Restart the computer and start typing the key F8, select Safe mode with command option. If you are prompted to select an operating system, use the arrow keys to select the right pair and press ENTER. Log in as administrator or with an account that has administrator credentials. At the command prompt, type % systemroot%\system32\restore\rstrui.exe, and then press ENTER. Follow the prompts to restore your computer to an earlier date.