Canon Digital IXUS 9015

Similar Questions

• Just bought an old Canon digital Rebel (DS6041) and cannot upload photos on my laptop (Win 10).

  I just bought a Canon Digital Rebel DS6041, opportunity and it all works very well, I don't see the camera when I use the USB connector for my Windows Mobile phone, 10.  It seems no way to download the photos to the computer.  Where can I buy a device I can plug the CF card, and plug the adapter into the SD card on my computer?  Or is there a workaround that would make a direct connection to work like all other digital cameras I've ever used?  I've never had one problem for the computer to recognize any other camers, including Fujifilm, Olympus, Canon or other.  Why this one?

  Card readers solve a lot of problems like software latest leaves aside the necessary drivers for our old devices. Everyone should have a map handy reader because they allow transfers from / to any computer with a USB port.

• Windows Vista does not recognize Canon digital camera

  I have trouble getting Windows Vista to recognize my camera Canon Digital Rebel XT.  I did the following:

  -Update the driver from the Canon - camera website appears in the 'Computer' window as an external hard drive
  -Find the device in the Device Manager under imaging devices like Kiss_N_Rebel_XT EOS 350 d, click right, uninstalled, and turned off the camera.  Turned the camera back on and the drivers were would have been installed correctly.  The device still does not appear as a disk in the window 'computer '.

  How can I access files on my camera?

  Thank you.

  Hello GDB8791,

  Thank you for posting.  The only time where I can think about when a camera come in the 'Computer' window would be if it has a type of storage device that it contains.  For example, a flash drive or memory key/card.  Check if you have the storage card inserted in the camera.  You can also open the Photo Gallery and select Import to see if it will access the camera.

  Please let me know if this helps you. Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Drivers for Canon Digital Rebel XT 350 d on Windows 7 (64-bit) PC

  How to find and install drivers for my camera Canon Digital Rebel X 350 d? I have a Windows7 (64-bit) PC. Canon said that widows 7 PC site doesn't have drivers for my camera.

  Hello

  If the site says ' driver may be included in your operating system or you may not need a pilot ' then you why that you need? Your camera has a port "output" (probably a micro-USB port)? If you can, just plug the camera into your computer, turn on the camera, and it should appear in your file (e.g. Windows Explorer) Manager. It cannot be labelled as Rebel X camera, but something more esoteric like DCIN or other such lettering which is actually the name of your memory card or other less clearly understood.

  If your camera is not a port of 'exit', it is perhaps not able to connect it to a computer (which would be very strange indeed). Thanks for posting here back with more information on your camera, the ports as they are and what, if any, errors you have found. I'll try to help you, but it takes a lot more information to do this.

  Keep me posted and let me know how you fare.

  Kind regards

  BearPup

• Are there any drivers for the canon digital rebel eos 300 d for Windows 7

  Are there any drivers for the canon digital rebel eos 300 d for Windows 7?

  Hello

  Like you need help with the driver for Canon digital rebel EOS 300 d, you will need to contact the manufacturer of the product for the driver. According to the Windows 7 compatibility check, this particular camera is not compatible with 32-bit (x 86) as a 64-bit (x 64) operating system.

  For more information about the Windows 7 compatibility, visit this link: http://www.microsoft.com/windows/compatibility/windows-7/en-us/Search.aspx?l=en-us&s=canon%20digital%20rebel%20EOS%20300D&type=Hardware&page=1&os=32-bit

  For more information about the driver, visit this link: http://www.usa.canon.com/cusa/support/consumer/eos_slr_camera_systems/eos_digital_slr_cameras/eos_digital_rebel?selectedName=DriversAndSoftware

  I hope that helps!

• Canon digital camera is not recognizable to my computer download

  I downloaded the cd from the camera digital canon powershot to my computer. Then the connected camera. I then clicked on browezer zoom on my desk and went to acquire the device settings, then connect the camera. Images downloaded from the camera. But all the images are unrecognizable. Only the colors, lines. quarrel, nothing recognizble. Is something wrong with windows xp, digital camera Canon, zoom browzer, etc..

  Help, please

  Thank you Tim

  Contact Canon support.

• Where can I find a driver for my Canon digital camera?

  Original title: I have a Canon EOS REBEL XT 350 d Digital SLR Camera, how and where can I find a Driver for my camera? Tried Canon Canada but nothing works. Please someone help me please! Thank you very much.

  I have a Canon EOS REBEL XT 350 d Digital SLR Camera, how and where can I find a Driver for my camera EOS REBEL XT 350 d Digital SLR camera? Canon Canada's I tried but nothing seems not to work. Please someone help me please! Thank you very much.

  Hello

  Please, try this link and download the drivers here.
  http://USA.Canon.com/Cusa/support/consumer/eos_slr_camera_systems/eos_digital_slr_cameras/digital_rebel_xt#DriversAndSoftware

  You get the sort or error messages?

• Canon Digital Photo Professional is not compatible with Windows 8?

  I'd appreciate any help available.  I just bought an HP computer with windows 8.  I got a Canon Rebel t3i for Christmas and you may not use the software that came with it for editing.  It's Digital photo professional.   My computer tells me it's not compatible, but I went to Canon and downloaded the updated version and it still does not work.   The error message comes when I click on to say the Office X program requires a display capable of resolution 1024 x 768 or more (screen area) and colourful or higher settings.   The resolution is defined as recommended in 1920 x 1080 and color seems high.    Very frustrated because my sister says that it is a great program for my camera.   Please respond to all suggestions.   Thanks in advance.

  Moved from feedback

  Original title: program programs Application Applications compatibility

  Hello

  The only thing we recommend is that you contact Canon support for a resolution. Compatibility is the responsibility of the developer software/device.

  Canon U.S.A. - Support Contact:

  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

  Canon user Support Forums:
  http://forums.USA.Canon.com/

  Concerning

• Where is Canon digital camera for installed desktop icon

  Icon photo Canon accidentally removed from the back of the office, how can I get it?

  Find the program in the start menu. All programs. Right-click on it and send to | Desktop (create shortcut).
   
   

• Digital Canon Digital Rebel XT 8 Megapixel DSLR camera

  64-bit Windows will not recognize the device when it is connected.  (already made sure to set the mode correctly on the camera)

  Tuesday, October 16, 2012 13:36:20 + 0000, DanSmith53 wrote:

  64-bit Windows will not recognize the device when it is connected.
  (already made sure to set the mode correctly on the camera)

  You ever need connect your device directly. Buy a card reader for
  the type of flash card your camera uses (they are cheap).
  Place the flash card and plug it into a USB port.

  Personally, I prefer to do it this way. It is easier and does not use
  the camera battery. I have both these card readers - one I keep on
  my desk, close my desktop computer and another that I keep in my
  Bag for laptop to use when traveling.

  Ken Blake, Microsoft MVP

• Lightroom does not recognize Canon EOS350D

  I can import the photos in my Canon 350 d using the Canon EOS Utility provided, but I can't import directly in Lightroom - it appears a message indicating no device is connected.  I get (RAW + jpeg) photos on my computer using the EOS Utility software, then import into Lightroom from disk.
  I know that people recommend card readers, but I did not and do not wish to buy and carry one around. My laptop only accepts SD cards, not CF. I know not that import directly from the camera is supposed to work, so why isn't she?
  I installed the driver WIA and RAW codec for the camera and I can import JPEG sound files in Windows or Photoshop Elements - it's just LR that does not recognize. It does not recognize my compact camera (Canon digital Ixus 75).

  
  Lightroom 2.3
  Windows Vista SP2 (32 bit)
  Canon EOS 350 d

  Go through the menu research of communication protocol, change opposite of what it currently is.

  John, you might have a look at the 20 d for this, I think it is same. Do not remember exactly what he said... PTP and mass storage I think...

• getMetadata: CRLF in XMLTYPE after 2000. caracter

  Hello

  I use 12 c with APEX 4.2 where I have the following table:

  CREATE TABLE LETS_PICTURE
    (
      PICTURE_ID  NUMBER CONSTRAINT NN_PICT_PICTUREID NOT NULL ,
      CASE_ID     NUMBER CONSTRAINT NN_PICT_CASEID NOT NULL ,
      FILENAME    VARCHAR2 (500 CHAR) ,
      DESCRIPTION VARCHAR2 (500 CHAR) ,
      PICTURE     BLOB ,
      PREVIEW     BLOB ,
      MIMETYPE     VARCHAR2 (500 CHAR) ,
      CHARSET         VARCHAR2 (500 CHAR) ,
      EXPOSUREDATE DATE ,
      ADDRESS      VARCHAR2 (200 CHAR) ,
      POSTCODE     VARCHAR2 (10 CHAR) ,
      CITY         VARCHAR2 (50 CHAR) ,
      REGION       VARCHAR2 (50 CHAR) ,
      COUNTRY      VARCHAR2 (50 CHAR) ,
      LONGITUDE    NUMBER (9,6) ,
      LATITUDE     NUMBER (9,6) ,
      EXIFDATA     XMLTYPE ,
      CREATEDBY_FK NUMBER ,
      CREATEDON    DATE ,
      ISDELETED    CHAR (1 CHAR) DEFAULT 'N' CONSTRAINT NN_PICT_ISDELETED NOT NULL
    ) ;
  

  With an element of APEX file browser, I load a JPG file directly in this table. Because the first file browser element inserts the file and make then one update to all other columns, I create the preview of the image with the following trigger:

  CREATE OR REPLACE TRIGGER TRG_BEF_UPD_PICTURE
      BEFORE UPDATE
      ON LETS_PICTURE
      REFERENCING OLD AS OLD NEW AS NEW
      FOR EACH ROW
  DECLARE
      thumb BLOB := NULL;
      oiimage ordimage := NULL;
      oithumb ordimage := NULL;
     metav XMLSequenceType; 
  BEGIN
      IF nvl(length(:NEW.PICTURE),0) > 0 AND LOWER(:NEW.MIMETYPE) LIKE 'image%' THEN  
          dbms_lob.createtemporary(thumb, true, dbms_lob.call);
  
          oiimage := ordimage(:NEW.PICTURE);
          oiimage.setproperties();
          oithumb := ordimage(thumb);
  
          oiimage.processcopy('maxScale=200 200', oithumb);
          :NEW.PREVIEW := oithumb.getcontent();
      
          metav := oiimage.getMetadata('EXIF'); 
          :NEW.EXIFDATA := metav(1);
      
          dbms_lob.freetemporary(thumb);
      END IF;
  END;
  /
  

  I downloaded the file again and compared to the original - the file and its data EXIF is quite ok - so the question of file browser does not destroy any information.

  But the XML data in the column EXIFDATA have a linebreak after 2000. character:

  <exifMetadata xmlns="http://xmlns.oracle.com/ord/meta/exif" xsi:schemaLocation="http://xmlns.oracle.com/ord/meta/exif http://xmlns.oracle.com/ord/meta/exif" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
     <TiffIfd>
        <Make tag="271">Canon</Make>
        <Model tag="272">Canon EOS 400D DIGITAL</Model>
        <Orientation tag="274">top left</Orientation>
        <XResolution tag="282">72.0</XResolution>
        <YResolution tag="283">72.0</YResolution>
        <ResolutionUnit tag="296">inches</ResolutionUnit>
        <DateTime tag="306">2013-10-29T10:33:43</DateTime>
        <YCbCrPositioning tag="531">co-sited</YCbCrPositioning>
     </TiffIfd>
     <ExifIfd tag="34665">
        <ExposureTime tag="33434">0.016666668</ExposureTime>
        <FNumber tag="33437">5.0</FNumber>
        <ExposureProgram tag="34850">Normal program</ExposureProgram>
        <ExifVersion tag="36864">0221</ExifVersion>
        <DateTimeOriginal tag="36867">2013-10-29T10:33:43</DateTimeOriginal>
        <DateTimeDigitized tag="36868">2013-10-29T10:33:43</DateTimeDigitized>
        <ComponentsConfiguration tag="37121">YCbCr</ComponentsConfiguration>
        <ShutterSpeedValue tag="37377">5.906891</ShutterSpeedValue>
        <ApertureValue tag="37378">4.64386</ApertureValue>
        <ExposureBiasValue tag="37380">0.0</ExposureBiasValue>
        <MeteringMode tag="37383">Pattern</MeteringMode>
        <Flash tag="37385">
           <Fired>Yes</Fired>
        </Flash>
        <FocalLength tag="37386">70.0</FocalLength>
        <FlashpixVersion tag="40960">0100</FlashpixVersion>
        <ColorSpace tag="40961">sRGB</ColorSpace>
        <PixelXDimension tag="40962">3888</PixelXDimension>
        <PixelYDimension tag="40963">2592</PixelYDimension>
        <FocalPlaneXResolution tag="41486">4433.2954</FocalPlaneXResolution>
        <FocalPlaneYResolution tag="41487">4453.6084</FocalPlaneYResolution>
        <FocalPlaneResolutionUnit tag="41488">inches</FocalPlaneResolutionUnit>
        <CustomRendered tag="41985">Nor
  mal process</CustomRendered>
        <ExposureMode tag="41986">Auto exposure</ExposureMode>
        <WhiteBalance tag="41987">Auto</WhiteBalance>
        <SceneCaptureType tag="41990">Standard</SceneCaptureType>
     </ExifIfd>
     <InteroperabilityIfd tag="40965">
        <InteroperabilityIndex tag="1">R98</InteroperabilityIndex>
     </InteroperabilityIfd>
  </exifMetadata>
  
  

  So, as you can see on line 36 file XML is not valid more. For this reason, I can't access the XML with any operation XMLTYPE data.

  When I stop the trigger and remove the linebreak by updating the following statement EXIFDATA works:

  DECLARE 
    myXMLType XMLType;
  BEGIN 
    SELECT EXIFDATA
    INTO myXMLType
    FROM lets_picture
    WHERE picture_id = 1;
  
    DBMS_OUTPUT.PUT_LINE('Namespace: ' || myXMLType.getNamespace() );
    DBMS_OUTPUT.PUT_LINE('Root Element: ' || myXMLType.getRootElement() );
  END;
  

  But not this one:

  SELECT t.picture_id, x.*
  FROM lets_picture t,
    XMLTABLE ('/exifMetadata/TiffIfd'
              PASSING t.exifdata
                COLUMNS Make VARCHAR2(200) PATH 'Make',
                        Model VARCHAR2(200) PATH 'Model') x
  WHERE t.picture_id = 1;
  

  So my questions are:

  1. How can I avoid the linebreak in the EXIF-XML data after 2000. character?

  2. why the XMLTABLE in the last SELECT statement works only when the element root in the XML contains no attributes like this:

  <exifMetadata>
     <TiffIfd>
        <Make tag="271">Canon</Make>
        <Model tag="272">Canon EOS 400D DIGITAL</Model>
  ...
  

  I'm looking for a really long time to fix this, so I hope someone can help me.

  Best regards, Christian

  Christian,

  I do not reproduce the problem on my db. Metadata is created OK.

  Are you sure that's not a problem with your client tool?

  Could you try in SQL * Plus, with these settings:

  SQL > set lines 200

  SQL > set 200 pages

  SQL > set long 5000

  SQL >

  SQL > select xmlserialize (document metaexif dash) metaexif

  2 from photos

  3 where id = 1;

  METAEXIF

  --------------------------------------------------------------------------------

  "http://xmlns.Oracle.com/ORD/Meta/EXIF" xsi: schemaLocation = ".

  http://xmlns.Oracle.com/Ord/meta/EXIF http://xmlns.oracle.com/ord/meta/exifxml «»

  NS:xsi ="http://www.w3.org/2001/XMLSchema-instance" > ".

  Canon

  Canon DIGITAL IXUS 850 IS

  at the top left

  180.0

  180.0

  inches

  2013 12-25 T 15: 11:59

  centered

  0,00125

  2.8

  0220

  2013 12-25 T 15: 11:59

  2013 12-25 T 15: 11:59

  YCbCr

  5.0

  9.65625

  2.96875

  0.0

  2.96875

  Model

  NO.

  No function Strobe return

  Auto

  Yes

  NO.

  4.6

  0100

  sRGB

  3072

  2304

  13653.333

  13633.136

  inches

  Area of the colors of a chip

  DSC

  Normal process

  Auto exposure

  Auto

  1.0

  Standard

  R98

• Windows Vista does not see my Canon G12 digital camera

  I tried to upload photos today of my Canon G11 digital camera and has encountered a problem.
  I used this camera and other cameras on this computer before and had no problem connecting to the cameras.  Today, I'm having a problem.
  (1) I plug in the camera and a small window at the bottom right of my screen jumps to the top of the poster "install device driver".
  "(2)"new hardware found"window that reads,".
  Windows needs to install driver software for Canon digital camera»
  There are three choices:

  • Locate and install driver software
  • Ask me later
  • Do not show the message for this device

  (3) I click "locate and install driver software" and I get a updated driver software - error of digital Canon camera that reads, "Windows has encountered a problem installing the software driver for your device."  Windows found driver software for your device but encountered an error trying to install it.
  Digital camera
  An error occurred during the installation of the device:
  Cannot install the driver because he is only not digitally signed properly.  Contact your hardware vendor. »

  I tried to reboot several times, and I tried to uninstall the device from Device Manager and reinstall the device. None of these worked.  |

  AFAIK there are no drivers for this device on the Canon website.  How can I get my Windows Vista computer to recognize my Canon G11 camera?

  Thank you
  John

  a screen pops up announcing that a new device has been detected.

  The drivers for this device are not installed. (Code 28)
  To reinstall the drivers for this device, click on reinstall.

  Yes there is no drivers for the device. The software supplied with the camera must be installed. The camera window should open when the camera is connected to the computer. Try using another USB port or use another cable, it can go bad too.

  In the Device Manager expand Universal Serial Bus controllers, search for the connected camera or something as a mass storage device. Right click above and uninstall, then restart, it needs to be reinstalled. If does not uninstall everything under USB controllers and then restart your computer.

• Cannot transfer images from digital Canon to Windows Vista. received message "save file not found" "Cameras Windows DC. default download folder is "my images".

  I have been transferring pictures from my Canon Digital via the Canon software in a Windows "My pictures" file for about 2 years with great success.  Today, an attempt to transfer was interrupted with the message 'Save folder not found' "Cameras Windows DC.  I noticed that was missing the file "my images".  I added one, I reinstalled the Canon software, I tried to download the image using the "Windows Photo Gallery", but got the same message as above.  What can I do to be able to download the photos again?

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two (he may have started before that you have noticed).  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If this does not work, please transfer your question in images and video Forum at: http://social.answers.microsoft.com/Forums/en-US/vistapictures/threads where the people who specialize in issues related to the image will be more than happy to help you with your problem.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Lightroom, officers shot and Canon 350 d Digital

  Hello

  I am designer of jewelry and I try to take some pictures of my work.

  I want to attach my Canon Digital 350 d to Lightroom, so I can easily see my photos on a large format without having to constantly plug and unplug my camera to my computer.

  I have real problems get Lightroom to recognize that my camera is fixed. I checked that my camera is supported and the internet seems to suggest that it is.

  Can someone help me? My lack of knowledge of the camera and the computer makes me want to throw it all out of the window! I can't find a set of infallible step by step instructions on how to connect the camera to the software. and here, I've noticed that a lot of people just get directed to the troubleshooting provided by Adobe, but this page is has not helped me so far.

  Any help will be greatly appreciated. I lost all day to tinker without result

  Thank you

  Rachel

  If you are referring to this page you receive all the necessary information on the attachment.  Adobe documentation on this page for the attachment has become essentially worthless.

  A list of cameras that can be attached to Lightroom.

  Look at this page and you will see your camera support has been removed after Lightroom 4.1 (that's the legacy link)

  List of cameras that can be attached to Lightroom

  Pretty poor documentation to attach, about as bad as their quality control programming lately.