Yoga 900 video output

Similar Questions

• IdeaPad Yoga 13 + 0A 33970 ThinkPad USB 3.0 Dock Station + Windows 10 = no video output?

  All connected to the dock station seems to work fine except for the video output, which does not appear.

  Used to work fine under Win 8.1 but decided to move to Win10 yesterday... ugh.

  I tried to update on the latest software/drivers from DisplayLink and the tray icon says 'No DisplayLink devices detected'.

  Someone at - it advice?

  Finally he got to work!
  You had to use the heavy duty removal tool displaylink, unplug the displaylink to prevent resettlement (the instructions don't tell you this!), and then install the latest driver of Lenovo, then reconnect and let it complete the installation. Phew!

• Yoga 900 wakes up from his sleep when picked up by the short edge

  I want to show Aproblematique I had with my 900 Yoga to see if others have had similar problems.

  I discovered this when I put my Yoga, (who was asleep) in my backpack and then subsequently noticed he was awake. It took me a while to understand what was going on, but I finally decided that she had nothing to do with the backpack.

  My 900 Yoga wakes when picked up by the short edge (as I have done to put n my backpack). You can see in the video:

  Yoga 900 wake when picked up

  (BTW - I'm not press the laptop, I'm just taking it as it is necessary to pick it up by the edge.) Press the lid and there is a pressure on the rise on the bottom. It is the pressure on the lid which seems to be the cause of the laptop to wake up)

  Note that Lenovo has been great and sent me a replacement laptop. But I'm curious to know if others see this same problem.

  Is this a common problem with 900 Yoga?

  
  

• Cannot find my Satellite L350 - 10 H - external full HD video output

  Hello everyone.

  I have a problem with my satellite L350 - 10: when I try to join a second external monitor in full HD.
  Actually Im only able to duplicate my laptop with the same resolution (1440 x 900) display.

  I cannot set a Full HD resolution for my Samsung external monitor system.
  I don't think that can be a limitation of the Chipset because I can do that with all my laptop older, I have at home.
  Now the strange thing is that when I try to search for a driver on the Toshiba site, my model just do not exist!

  I put the serial number and the website doesn't recognize the model, and then in the list, this model do not exist.
  It is: * TOSHIBA SATELLITE L350 - 10 H *-WINDOWS VISTA HOME PREMIUM operating system

  Someone also has this model? How can I reach a full hd monitor?

  Hello

  First of all, if you take a glance on the European Toshiab driver page, then you will notice that the driver search engine does not contain the sub model numbers but series numbers this means that you need to check the model number and then could find the right drivers.

  As far as I know the laptop Satellite L350 - 10 H belongs to the series of PSLD0E.
  You can find the drivers for this laptop if you would choose L350 PSLD0E.
  Easy. Isn t it?

  Now, back to your video output;
  As far as I know there is a Mobile Intel GL960 Express Chipset.
  I have the same chipset and I can use the external monitor perfectly.
  But I installed the Intel graphics driver actually the driver preinstalled on my laptop didn t contain some resolutions
  That's why I recommend the Intel page and download and install the driver for the Mobile Intel GL960 chipset.

  After the new reboot, you should check if you can choose the resolution.

  Welcome them

• Two screens external yoga 900

  Hello

  Everyone figured out how to connect two external displays with Yoga 900 using the C USB port? I really want to buy it, but this is a dealbreaker for me.

  You can use a Type C USB adapter DisplayPort in conjunction with a DisplayPort STD hub or a USB Type C appropriate adapter that incorporates a hub of STD.

  If one of the external screens supports chaining, you can use a C of Type USB to DisplayPort adapter to fix the screen on the 900 of Yoga. Thereafter, you must connect the second screen on the first screen DisplayPort output.

• No HDMI output video output mode "DUPLICATE".

  I'm having a problem trying to get this laptop at the video output to the HDMI port mode DOUBLE.  In DOUBLE mode the frame buffer should be displayed on the screen of the computer AND it should display the video on the HDMI port, so it can be seen on a HD TV, and al.  What is strange, is that EXTEND and PROJECTOR ONLY modes work that proves the cable, HDTV, and the video port on the laptop works properly in these modes.  However, duplicate video mode is displayed on the screen of the laptop and no video out the HDMI port.  I know because the HDTV screen is empty with the exception that the HDTV displays the message "No Signal".  I have the latest firmware and installed video drivers.  Anyone who has an idea of what's going on?

  This computer is only 3 weeks.  This is the first time I tried to use the HDMI output on it.

  HP Pavilion dv7 - 6187cl

  Windows 7 64 bit

  I think that I found the solution to the question that I had.  The problem seems to be that the laptop seems to be driving the HDMI output on HDTV with a resolution of 1600 x 900.  This causes the HDTV to not be able to synchronize the signal from the laptop.  As HDTV does not recognize the resolution, the screen on it is empty.  However, even though mode DOUBLE, if you change the resolution of 1366 x 768 laptop, then the laptop and HDTV display video.  Curiously, although the HDTV can manage resolution up to 1920 x 1080 it is impossible to view the output of the laptop when it is set to 1600 x 900 mode DOUBLE.  If the PROJECTOR ONLY mode HDTV work very well in resolution 1920 x 1080.  In addition, when mode EXTENSION the laptop and the extended secondary display can be set to a resolution of 1600 x 900.

• Satellite P100-102 without digital-video output TFT-connection-Port?

  Hello

  We do not understand why mobile phones latest, as the Satellite P100-102 would be produced without digital-port connect TFT´s...

  On the market-enduser TFTs are popular, but it is not possible to use the digital interface with the portable toshiba. We are not interested in the purchase of laptops from other manufacturers, but our time flee.

  Can you give us a tip, then of the next generation Satellites with digital output to connect TFTs will reach the market?

  Best regards
  Sascha

  Hello

  Sorry, but I disagree with you.
  Toshiba designs laptops that support the digital port (D-video output port)
  Check for example the Qosmio of E, F, G series.

• Satellite 5105 and 5205 video output bad piece (US)

  The video output is good on the 5105.

  The image on the LCD will not give a complete picture. Thirdly, the bottom is either hidden or replica the upper third of the image. Most likely, I see a drooping white or gray. This occurred when starting, too.

  I replaced the LCD screen with another of a deceased 5205. This time, only the first third shows an image. The lower 2/3 seem to be blackened.
  In addition, the Toshiba Spalsh screen logo does not appear at startup (maybe it's because it's in the field of electricity failure).
  I have not checked the State of the screen LCD 5205. I also forgot to connect this laptop to external video, when I used the
  5205 LCD.

  I just want to confirm the video cable needs replacing.

  I would like to know how completely detach from the Palm of the lower chassis. I read the instructions provided by the sticky thread. I'm stuck at the point where he seconded the palmrest except for the area around the speakers ' top'. Better yet, should what cables I detach before completely disassemble the palmrest?

  Once this is done, I intend to replace the video cable, but I also see what looks like a metal shield in the middle of the laptop. Any thoughts on treatment that, too?

  Blurred image of 5105: http://img526.imageshack.us/i/toshiba510501.jpg/
  Then the lower part is gradually degraded: http://img29.imageshack.us/i/toshiba510502.jpg/
  and: http://img196.imageshack.us/i/toshiba510504.jpg/
  and go: http://img262.imageshack.us/i/toshiba510503.jpg/

  Then I rebooted the 5105: http://img196.imageshack.us/i/toshiba510505.jpg/

  The 5205 is even more colorful!

  http://img12.imageshack.us/i/toshiba520501.jpg/
  http://img150.imageshack.us/i/toshiba520502.jpg/
  http://img262.imageshack.us/i/toshiba520503.jpg/
  http://img526.imageshack.us/i/toshiba520504.jpg/

  I'm afraid I forgot to test the video output on the 5205.

  I also posted this on Notebook Review.

  Thanks for reading!

  Hello

  I; m afraid; It looks a bit like a graphics card problem...
  If replacing the screen did not help the GPU could be affected.
  In this case, the motherboard should be replaced. It would be the worst case, because a motherboard is the most expensive part for laptop.

  In addition, you will not find any what manual disassembly here on the Toshiba page.
  These manuals are not for use public and created only for the technicians of the ASP.

  But the world wide web contains lot of information and I would recommend to google for some details.

• Tecra 8000 composite video output

  I'm running the video output from my tecra 8000 via yellow composite video connector at the rear of the unit. I thought it was as simple as pluging in both sides of a RCA (one end to the video input of a video recorder) Jack and the other end into the video Tecra.
  I get NOTHING on the screen. What I am doing wrong?

  Thanks in advance

  Hello

  normally, you have to pass the video signal in the composite connection.
  For this (on newer models at least) by pressing FN + F5.
  This combination toggles the 'next' display/device combination
  If the videodevice primary and standard is the internal TFT, pressing FN + F5 once going to signal internal both TFT and RGB (monitor connector). Next time you press it, it will only in RGB, and next time, again, it should go to the TV output (composite).

  Try it!

  BR
  Tom

• Video output distorted on Qosmio F10

  Hello

  Until recently, my video output on my Qosmio F10 function works beautifully. When I connect my laptop to the TV the other day, using an s-video cable, the image had turned very distorted. The TV picture flickers and sometimes disappears completely.

  My laptop has the graphics card Nvidia GeForce FX Go5700 and I changed no settings what so ever of the point in time when the video output was working properly.

  To debug, I bought a new s-video cable and an adapter SCART. The use of these I've eliminated that the s-video TV in the port is the problem. It seems to me that if something is wrong with the signal from the graphics card.

  I would be very grateful for a diagnosis on this issue.

  Thank you and best regards,

  Johan

  If you are quite sure that the cable is ok, so it could also be a problem with the connection. Maybe lose plug or something like that.
  However, as a first step, you may try to update the page Toshiba graphics card driver.

  It would be very interesting to know if such question will appear on the new OS recovered

• Equium A200 - 1V0 DVD Player error impossible of video output to an external device

  Hello
  I use my Equium A200 1V0 laptop with Vista Home Premium, and whenever I try to watch a DVD using the preinstalled Toshiba DVD Player software, I get the following error...

  "Unable to video output to an external device. Please spend your
  display the buttons on the unit by pressing the Fn + F5 after the end of the application. »

  I do not have an external monitor, and have never had a. (By pressing the Fn + F5 buttons does not work, because...) I have not attached external devices!)
  The software used to work properly, and I have not changed the settings at all.

  I have now tried to reinstall with the latest download from Toshiba, but the problem remains.

  Any thoughts would be accepted with gratitude.

  Bufster

  Hello

  I found a boyfriend of the solution.
  How?

  I searched simply here in the forum and found this thread!
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=114726

  Jack Black has posted a link to a useful Toshiba doc that says that this error is related to the Realteck sound driver.

  Update the audio driver and you must solve this problem!

• Satellite 1800-100: video output does not work

  Jen
  I just installed windows XP on my old Satellite 1800-100, but now my video output no longer works. So I just downloaded the latest version of the driver, but there is no way I can get it installed. According to Windows the new driver is more recent, so it won't let me update. And when I try to uninstall the display driver, I have to restart for the taking of effect and wile it restart automatically installs the standard driver again.

  Can someone help me?
  Welcome,
  Daan

  Hello

  You say TV out port, or monitor the port? As far as I know, this unit is pre-installed with Windows XP Home edition at home and all the drivers can also be used for WXP Pro.

  You preinstall your own OS (no recovery image)?

• Satellite 1135-S1553 without S-Video output Port - how to connect a TV

  I have a portable Satellite 1135-S1553, how to connect it to the TV without having the S-video output Port in my laptop?

  Are you sure that your computer laptop doesn t support port s-video OUTPUT to 100%?
  According to [this page | http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_tourView.jsp?moid=434998&rpn=PS113U&ct=PT&so id = 660059] portable Saturday 1153-S1553 supports this port at the rear.

• Tecra S3 Advanced Port Replicator III more: video output, analog & digital

  I have a Tecra S3 in association with Advanced Port Replicator III.
  I can't get the two graphics cards to work together.

  The analog and digital video output should work together.

  It works on a Tecra S2, but not on the S3?
  Does anyone have an answer?

  Hello

  You want to use both outputs DVI and VGA on Advanced Port Replicator III graphics more simultaneously?

  Advanced Port Replicator III more supports the use only if the computer system unit laptop itself also supports the simultaneous use of RGB & DVI.

  So that would mean that the backs of Tecra S3 not supported this feature

• Video output port does not work on Tecra 8000

  My Toshiba Tecra 8000 screen has cracked and I realized this was a video output port, but it does not work.

  Can someone help me?

  Hello

  What video output port can you hear? The VGA port or the output port RCA-video? In both cases, the external display you seek, should give a picture.
  If this isn't the case, it should at least be configurable in windows.

  Please specify your question and tell more details on exactly what you want.

  Welcome them