Canon ip4000r wireless printer no. Longer answers after WRT54G2 Firmware Upgrade

Similar Questions

• My Canon MG5200 wireless printer will not respond

  I recently bought a new Canon MG5200 series printer wireless which is supposed to be a really excellent printer with photo printing and a lot of different options, however when I try and print just a normal file (doc) he used to feel. I think it must be something to do with the wireless connection, but I followed all the steps and helps out and he won't answer. On the screen of the printer, it gives only the option to print "PDF Document" which is a problem as well? Thank you.

  Hello
   
  1 have. what troubleshooting measures you tried to solve the problem?
   
  2 have you installed the latest drivers for the printer?
   
  Follow the steps mentioned below and check if that helps.

  Step 1:

  Follow the steps in the article below and check if it helps.

  Solve printer problems

  Step 2:

  This may occur if the print spooler requires other services, and these services are not running. To resolve this issue, follow these steps:

  a. Click Start, type "Services" in the search box

   
  b. in Services, right-click on print spooler and then click Properties.
  
  c. click the Dependencies tab. The first box list all system services that must work for the print spooler start. These are dependencies.
  
  d. take note of each service, click OK, and then restart each service on which the print spooler is dependent, if the service is not already started. If a service is not started, right-click, click Properties, and then make sure that the startup type is automatic.

• OfficeJet Pro 8500 a: printer no longer works after reset wireless network

  OfficeJet Pro 8500 has, MacBook Pro, running the Mavericks.

  For 3 days, when we added a password and blocked our router wireless (modem ATT UVerse), our printer is "offline" print jobs queued, but do not print.  When I go and check it says "printer offline".  Or in the print queue, it is something like "looking for printer."

  He worked briefly when we found a power cord and plugged into the laptop, but will not work wireless, which he did before.    No changes except to repeat password for the network.

  I have the manual and you have turned off everything, then return in the order recommended (router, printer, then laptop).  Always offline.   Can someone please?   Thank you!

  Hello @LindaGrace,

  Welcome to the Forums of HP Support!

  I understand that since to add a password to your wireless router your HP Officejet Pro 8500 has e-All-in-One Printer not communicate wirelessly with your computer Mac OS X 10.9. I would like to help you today with this problem of wireless communication.

  Now, make a change to your network, as an addition to a password or change a password, translates into having to reconfigure your printer on the wireless network. At this point your printer is to be 'blocked' access to your network wireless because of the change you made. To correct this problem, you simply raise the Setup wireless for your printer to "say" the printer network name and password. Once the wireless installation runs successfully all will continue to work for you according to the normal.

  To run the Wireless Setup Wizard on your printer, please follow the steps below.

  1. On the touch screen of the printer, press the right arrow key () to display the second navigation screen.
  2. Press network () to open the network Menu.
  3. Touch Wireless.
  4. Press the Wireless Setup Wizard, and then press continue.
  5. Please wait while the printer is looking for the routers that are nearby. Appears in the menu Select Network (SSID) .
  6. Scroll the list of network names until you find the name of your network.
  7. Tap the name of your network.
  8. If you are prompted, enter the WEP or WPA key. This is the password for your wireless network. The password is case-sensitive.
  9. Wait for the printer to connect to the network

  -Source

  Once your printer is connected to your network again, please try to print. If printing still fails, you need to add the printer to your Mac because of the connection of network new printers. Please follow the steps below to add the printer to the Mac.

  1. click on the menu of Apple , then Preferences System.

  2. click on Print & Scanand then check if the name of your printer appears in the printer list.

  3. If your printer is already listed, remove and re-add the printer to check the communication with the Mac. Click on the name of your printer, click the minus sign (), and then delete the printer

  4. click on the plus sign (), click Add a printer or a Scanner, click the name of your printer

  5. click Add to add the printer to the list.

  Now that the printer is properly configured on your network and added to the Mac, please try again to print wireless.

  Please reply to this message with the result of your troubleshooting. Good luck!

• Unable to connect my laptop to the new wireless printer - error "installation failed" after entering my password/security key (WPA)

  I just bought an Epson printer. I went through the installation process on my laptop but I get the "Failed to install" error message after entering my password/security key (WPA). I am with BT and my home hub I have "Wireless Key", "PIN WPS wireless" and "Admin password" - which is it? I tried all three and not joy. Help!

  It is almost certainly looking for your "wireless key".

  The WPS Pin is only used if the printer supports "Wi - Fi Protected Setup" - which it probably isn't, and the "Admin" password is used to access your BT home hub to make configuration changes.

  In addition to identifying what wireless Epson printer you have, you can either

  • b changes to the configuration of the printer from a screen on the front or
  • (b) to connect to the printer by an Ethernet cable or
  • (c) to connect to the printer with a USB cable?

• Wireless connection no longer works after that the virus

  First a browser both stopped working for a month or two, and finally Internet worked from my laptop (although it worked all my other devices). Now after trying to fix my internet system works when it is plugged directly, but is no longer detects wireless connections, and the light doesn't light even when I switch 'on' the wireless switch. Help, please! Thank you!
  Mike

  It's a laptop?  With built in the wireless?   Assuming that so-

  Usually the unit must be included in the same device manager if there is a driver problem.   I suggest you check the BIOS.  The wireless is displayed there?  Turned on?
  I suggest that you update the chip set driver and also try to download and install the driver wireless from your computer manufacturer.   We'll see from there.

• HP wireless printer no longer works when I READ swithcd to uverse.

  using a speedstream modem and a Linksys broadband router.

  Hello

  You need to reset the printer once again, as you did initially. Check with the help of HP, their online
  documentation and drivers and ask in their forums.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I'm trying to connect my Canon MG5200 wireless printer to my new HP laptop with Windows 7 Home Premium.

  The printer is connected to my office and is a part of my network. However, I tried both the printer installation and troubleshooting (which is what he says, he need next to the State of the printer on the network) and none of the options worked. Suggest me you think I try?

  You do that?

  "Program to load the CD supplied with the printer. This CD should be installed in each computer or laptop that needs access to the printer. Once the CD program is installed, the router connected to the main computer will allow each computer or laptop to locate the signal of the printer. »

• Wireless Networking no longer work after reinstallation of Windwos 7

  My Acer must have reinstalled Windows 7 and now I can't use it in wireless mode

  My Acer must have reinstalled Windows 7 and now I can't use it in wireless mode

  Sorry, I don't recognize the problem. Please provide more information on your problem make it easy for technicians to solve. 

  Method [1]: Make sure that Windows recognizes the driver

  • Click on the start menu and select run...
  • In the text box, type the following: compmgmt.msc
  • In the left pane, select the device under System Tools Manager
  • In the right pane, verify that you can see your name of the driver under "network adapters". If this isn't the case, then your not maybe probably not installed driver. (You can see an exclamation mark beside the pilot. If you do not see the brand, then Windows could not detect that the pilot has been attached to the system)

  Please note that some laptops / motherboards come with a CD/DVD that contains the drivers installed on the laptop / motherboard. Sometimes, these drivers are included with the Windows CD that appears with the laptop. You must insert the CD/DVD that came with your laptop to be able to use the drivers that it contains. You may also problems with the sound card, VGA card and the cards network.

  You can search the Internet for drivers if you do not find your CD/DVD.

  Thank you
  I hope that was helpful :)

• Built-in camera no longer works after update firmware 7CCN35WW

  7CCN35WW applied on the 34 firmware. VeriFace stopped working, said that even if the camera is present in Device Manager there is no camera present. Skype does not either, says camera is used by another process, even after a fresh reboot.

  Fixed it by going into the BIOS and save the existing configuration. Camera works again.

• OfficeJet K7100: The printer does not not after the OS upgrade and the previous operating system.

  Upgrade to Windows 10, officejet K7100 has stopped working, I went back to windows7 and cant feel as driver for printer not found.

  He settled the. Had to re - install the printer using a CD, who had a friend of a friend.

  'Reliable' buddy is chugging along quite well now.

  Thanks a mill for your help.

• What 3115cn error code 117-363 average after a firmware upgrade failure?

  Hello

  I just got a replacement 3115cn after the former we failed in the warranty. I noticed that the firmware was old so just tried to update using the USB port and the printer is now saying to call assistance with error code 117-363. No power glitches or a bad power / data cables etc. He copied through the fine then just failed to complete startup after reboot.

  The only relevant fact that I can think is that the MPC had the latest firmware above as it has been transplanted across from the old, but the base firmware was older than the protocols supported in the CPC. That's why I tried to upgrade in the first place, I had lost a bunch of new features only have the old version of the installed base.

  I'll be the appellant first thing, but I wanted to ask if anyone knew in advance. (It would be a great help if each error code was listed on the web site of Dell, so I could get myself.)

  Kind regards

  Paul

  Message edited by paul_a_hill on 02/25/2008 17:39
  
  

• Showing files is no longer under Windows since firmware Upgrade a.35

  Hello

  I have upgraded from 2.01.32 to 2.01.35 and even if I see my music files in the drive, when I connect to windows he sees space is taken, but see as hidden files. Anyone know how to view or access?

  Help!

  Info. on the USB MTP and MSC modes:

  http://en.Wikipedia.org/wiki/USB_mass-storage_device_class

  http://en.Wikipedia.org/wiki/Media_Transfer_Protocol

  You can also do a search here, using the search box at top left.

  Basically, the MSC and MTP modes are 2 ways your Clip can connect to your computer for the same purpose: transferring files (and to see what is stored on your Clip).  MSC mode is the older (and often less problematic) mode, in which your Clip is seen as an external drive such as a USB key.  MTP mode is more recent and requires a driver found in Windows Media Player 10 and above (this is why you need WMP on your computer if you use MTP mode).

  Works in mode, and you can use the one that you like.  But note that if your drive is connected to your computer in MSC USB mode, your computer sees only the files that had been moved to the drive when the drive is connected in MSC mode.  Similarly with regard to the MTP mode.  However, all the files appear and can be played on your player, under some USB mode setting.

  A reason why some people prefer to set the USB Mode on their player to MSC or MTP: setting Auto, the Player tries to connect in MTP mode but then you will return in MSC mode if the connection of the MTP does not; as a result, you can have a mixture of MSC and MTP mode transferred the files to your drive, making some of them isn't visible on your computer without going to the other USB mode.

  Because MSC mode is more universal (playing with a wide range of operating systems, including Linux and on Mac, and without the need for Windows Media Player on the computer), some people prefer MSC mode.  However, note that the DRM (digital rights management) files need MTP mode - they will not transfer enough (the DRM license will not transfer) in MSC mode.

• How to print from my HP laptop for my Canon Wireless printer?

  I have a Canon MX410 Wireless printer is currently connected to my HP desktop computer through a USB port.  I would also like to add this printer to my laptop but it can not know!  I tried the Office of the instillation of the printer, but it did not work.

  Most wireless printers turn off wireless when the printer is connected by USB.

  I could not actually find a statement to that effect in the Canon documentation I've come briefly, but I suspect that is what is happening.  Unplug the USB cable and see if you can now get the printer works wirelessly with the laptop.

  If it works, re - configure the installation on your desktop to access the printer through a "Standard TCP/IP Port". It may be easier to simply uninstall the printer on the desktop and reinstall it by selecting "print via network" or whatever the Canon calls it during the installation process.

• Help! Computer connection issues / printer after Windows 7 upgrade

  I HOPE THAT SOMEONE HERE CAN HELP ME!  I am frustrated beyond belief.

  I have upgraded from Vista to Windows 7.  My computer is a hp dv5 pc, 64-bit.  My wireless printer is a hp OfficeJet J4680c.  Before the upgrade, wireless printing was perfect.

  Since the upgrade, when I try to print, two things will happen:

  (1) when I try to print, there is a mistake that the document cannot print.

  OR

  (2) when I try to print, the printer icon appears that the document will print, but nothing happens.  When I right click and open the Active printer, it shows that it is "printing", however the number of pages displayed is n/a.  After 2-3 minutes, the document simply disappears from the print screen, as if it printed.

  I went through the troubleshooting steps on my hp PC help & support, I have read the forums for hours and tried various fixes, I went through the center of solutions hp printer troubleshooting steps...

  The final diagnosis is that the computer is unable to 'find' the printer. Here is some additional information:

  I was able to print occasionally during the troubleshooting process (see below for more information)

  All the drivers are up to date.

  Computer and the printer are connected to the same network wireless in my house.

  Whenever I have manually print the "HP Network Configuration Page," it shows that the printer is "ready".

  Windows defender is OFF

  The Windows Firewall is DISABLED

  3rd party firewall Vipre has been RUNNING, with the same results to be

  What follows can offer anyone a clue as to the problem:

  Four times during this process of troubleshooting, I completely uninstalled printer and then reinstalled using the updated driver and instructions on the hp Web site.

  Whenever during the installation process, the computer does not find the printer, and I have to manually enter the IP address of the printer.  Then, the computer does not find the printer, and the installation continues.  Until he comes to the end, when it is completed at 98%. Then, I get a message:

  "Rediscovery printer detected problems. Maybe your PC is not able to track changes in the online status of your printer. If you use firewall software, make sure the port UDP 427 is unblocked from your printer at 192.168.0.5 for your PC. To resolve the problem, try to feed your printer market. »

  (of course checked summer port and the printer power is turned and the...) I followed all steps completely).

  Then, I give myself a choice or continue installing the software without connecting to the printer, or to continue with the installation of the printer.

  When I tried the first choice, install the software without the printer, then I went back later to install the printer. During the installation of the printer, I'm at the same point at 98%, with the same message.

  I also tried to install the printer in any case and it ends up all right, and then the printer worked for a day or two. But after a day or two, I'll be once more cannot print, and I will either receive the error message, otherwise it is not only print (SEE the BEGINNING OF THIS POST).

  I've tried everything I know to do and no message forum or troubleshooting is now offering me any new information.

  Can you help me???

  Have you tried the 'updates' on this page?  There is a couple who look like they would help.

• OfficeJet Pro 8500 has ceased to print after update firmware for LRP1FN1231AR

  I've updated the firmware in my work perfectly 8500 has and now the printer will not finish a print job after few minutes of no activity.  The fax is the same thing.  This all started AFTER the firmware upgrade completed successfully!  Now I'm stuck with an anchor of a printer.  Looks like it prints print and fax jobs in the buffer if I open and close the door of ink cartrage.  The unit currently cartrages to ink HP not installed and those that have been installed at the time of the upgrade.  I got a message warrning that using ink not HP may void the warranty.  Is it a time bomb that HP put in the new firmware to cause me to have to return a new printer?  All possible solutions?

  I installed an old set of "Genuine" HP cartrages that have been spent and the printer seems to work now.  I stayed alive all night without the message "printing" terminal hidious.  Very disappointed that the update didn't warn me on this subject and now I need to buy all the new ink cartrages.