Canon IP4200 printer, shows an error 6500

Similar Questions

• Printer shows an error but printed pdf

  Hi all!

  I have a very annoying problem with my Adobe Acrobat Standard.

  When I print a pdf document, I have the pdf I wanted but the printer down to the right corner of the screen does not go away.

  It is said that there is a single document, which has yet to be printed. And if I open the printer dialog box it means: error - printing and the symbol on the screen does not go away until I have cancel the print job.

  I had the same problem two weeks ago. And because it was so boring, I put my entire windows system.

  After that, the printer worked for two weeks without errors.

  But now, it's the same problem as before. And I'm getting really crazy.

  How can I fix this problem without setting up the entire system again?

  The problem is that I can not only uninstall and reinstall Adobe Acrobat, because it is a part of the software of my laptop and so I have no CD of it.

  The problem appeared in the Version 8.1.4. I have already updated to 8.1.5 but this made no change.

  I hope you can help me.

  Denise

  Sounds like the question now "bog" standard printer Adobe PDF uses one port other than "* My-Documents *.»»» PDF' or ' * Desktop-*.» PDF»

  Watched several times.

  You did not say if you use XP or Vista to verify appropriate locations based on your operating system for the following:

  Look for your Adobe PDF printer in "Printers and faxes" section of the control panel.

  Check the properties of the printer, specifically the port it uses. (On XP right click on Printer Ports tab, select Properties, Adobe PDF).

  If she's not my Documents or desktop (one of them must be verified) it's your problem.

  If you DO see these two ports in option, check one of them and then select 'OK' and you are G2G.

  If you don't see either of these two options, the ports have not been created during installation (you leave until the ports have been created as part of a mess up in the MSI install routine), then you must first close all dialog boxes, open Acrobat and select Repair on the Help menu.

  I hope that the fixed, but if your printer ports are not set after making a repair, you may need to do a little more work.

  Visit this link for more detailed information.

  http://acrobathelp.blogspot.com/2008/01/Adobe-Acrobat-8.html

  S.

• I have a Canon ip6600D printer which only becomes an error 6500, cleared error now no printing

  I have a Canon IP6600D printer and today it started acting.

  First of all, I found it turned off earlier today and I had problem trying to lights up but finally did and received an error message indicating an invalid legacy was plugged in to the printer - remove the device.  Nothing new has been connected to the legacy just usb that connects to my laptop.

  After about an hour of playing with the printer, unplug the unit, unplug the USB cable, turn on / off power with and without the USB cable, the message changed to an error message 6500.

  I played with it for about an hour, trying several things, on and outside, opening the lid with the inks and pressing the power button, etc... saw a message about a reset, which doesn't seem to work at first, but I tried once more to the power of the printer and everything seemed fine.  He showed several inks were out, so I replaced them with new cartridges and now no impression at all!

  I tried to send a word document that is black and white, went by his movements, seemed it was printing, but the page is empty.  I tried to send a picture of the PC - again took time to print the photo, but the page is empty.  I tried to use an SD card to print a photo and even once - took time and sounded like it was printing, but the page is empty.

  I tried to clean the heads, print an alignment page, etc..., all the basic things to correct the wrong impression but still nothing but perfect blank pages - no ink at all.

  Any suggestions?

  Hi Stevenoh,

  It is recommended that you contact the direct technical assistance. There is NO charge for this call. Information in real-time to a technical assistance call live would be very beneficial in this case.

  Please call 1-866-261-9362, Monday - Friday 10:00-10: 00 ET (excluding holidays). A Canon technical support representative will be able to solve this problem more quickly.

• OfficeJet 6500 a Plus: printer shows as a fax machine

  I unplugged my printer about a month ago and when I rebooted and tried to add a printer, it shows just like a fax machine. I've tried different help topics, nothing seems to work.

  Hi @Swissmizz,

  Welcome to the Forums of HP Support!

  I see that your printer of HP Officejet 6500 a more re-won't add to the Mac as a printer, as a fax machine. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution" if I helped successfully will solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand the frustration you are experiencing. HP doesn't have the full functionality of software and drivers for Mac OS X 10.10. Apple has a software update for the HP Officejet 6500 E710n driver, but it is only the print driver.

  That being said. I recommend reset us the printing system and add new printer using the driver update from Apple.

  Reset the printing system:

  To begin, I will have you reset the printing system on your Mac. Please click herefor instructions on how to perform the reset. When the site opens, follow the steps under"Reset printing in OS X Lion system" because the steps are the same for Mac OS X 10.10. This Reset deletes each printer on your Mac. However, it does not uninstall printers. Therefore, if use you other printers on the Mac, once the reset is complete simply make sure printers are attached via a USB cable or connected network and (+) add hide them po do not add your HP Officejet in now.

  Check and repair your Mac disk permissions:

  1. Open Macintosh HD and go to Applications
  2. Go to the Utilities folder
  3. Open disk utility
  4. Select the hard disk volume, you use (usually on the left)
  5. Select verify disk permissions
  6. Once this process is complete, select repair disk permissions

  Once the reset complete, restart the Mac.

  Uninstall the drivers and the software (if installed):

  Please click here to find out how to properly uninstall your printer. Once the site opens, select the drop-down list 'Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9' and follow the steps under two method to complete uninstallation.

  Once the uninstall is complete, please continue on.

  Check the Apple updates:

  1. Go to the Apple
  2. Select System Preferences
  3. Select software update
  4. Click update now
  5. Install your available updates
  6. Computer restart

  Add device:

  1. click on the menu of Apple , then Preferences System.

  2. click on Print & Scan and then check if the name of your printer appears in the printer list.

  3. click on the name of your printer, click the sign minus (), then remove the printer.

  4. click on the plus sign (), click Add a printer or a Scanner, click the name of your printer.

  5. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Ensure that the Officejet driver is selected.

  

  6. click Add to add the printer to the list. Do not add the AirPrint driver.

  7. try to print again.

• Error B200 on Canon MP620B printer

  I have a printer canon MP620B but I have error B200 on it cause I tried to plug it into a mac. If you could please tell me how to get rid of this error, it would be incredible! Thank you!

  Moved from feedback

  Original title: device

  Hi Gabriel,

  You can download the drivers on the Canon Web site.

  For assistance please contact Canon or Apple .

• my printer shows error & or shows offline

  my printer shows error & or watch the printer is offline

  Ronald

  What error does show?

  You have the right drivers and software installed?

  You can run this fix it tool to see if it helps with your problem.

  http://support.Microsoft.com/mats/printing_problems/

• uninstall the printer canon IP4200 of W/WINDOWS XP driver

  If I uninstall the driver &, reinstall and hope this fixes the error 6500, repeat hope

  Hello

  To answer your question correctly, I moved your post to the appropriate forum.

  Please wait and moderator of the forum will help you in a moment.

  Thank you!

• Need Canon mf printer firmware

  I have canon imageclass mf4122 multifunctional bw laser printer... It shows an error message "E225" whenever it is turned on. :( I tried to get the firmware of the mf4100 series official website... I have found none... can someone please help me with the file?

  I have canon imageclass mf4122 multifunctional bw laser printer... It shows an error message "E225" whenever it is turned on. :( I tried to get the firmware of the mf4100 series official website... I have found none... can someone please help me with the file?

  http://www.USA.Canon.com/nw3s/CanonUSA/DownloadContents/English/0400002001EN.htm

  Details - imageCLASS MF4150 Firmware Update, error E225 prevention code.

• My canon s200spx printer does not work on windows 7. I can't find a drive

  My canon s200spx printer does not work on windows 7. I can't find a drive

  Hello

  1. do you have a code error message when you try to print?

  2. don't you make changes to the computer before the show?

  3. you are unable to find the drivers for the printer?

  I suggest for the link and follow the steps in the article:

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can also download and install the latest drivers from the manufacturer's website:

  Reference:

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/s_series/S200#DriversAndSoftware

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• C4280 showed the error message "A4 not loaded in any bin" in Windows 8

  I connect my HP Photosmart C4280 all-in-One printer to my new laptop with Windows 8. Paper & I tried to print. However, he showed the error message "No loaded into any tray A4" and not printed.

  More information, I can't have ink cartridge 75 market. If the printer running with cartridge only 74.
  
  Please tell us how to solve the problem.

  I have uninstall & re-install the software. However, it does not work. But I discovered that running in 1 cartridge must be any problem, because it shows he showed as "single cartridge Mode."
  
  After that, I studied the error again & discovered "unloaded... A4. "look like related to digitization. Then, I tried to scan a document. After that, I tried to print a document & it works.

• Canon MX700 printer does not work

  After the update of El Capitan on my iMac, my Canon MX700 printer does not work. UGH!

  Mine has stopped working on Yosemite.  You have an old Mac OS X installed you can test it on?  You can run the test page for the printer itself?  I get the right error messages try to run the printer, and I ended up Canon to accept to sell me a MX922 at a discount.

• My printer shows to be downloaded and ready, but it will not be printed.

  My printer is a HP PSC 1401 all-in-one.  I tried to download a driver to install, and it said: there is already a pilot.  My printer shows as PSC 1400 series and ready, but nothing happens when I send anything to the printer.  It worked until I got a Dell computer.

  Hi DeannaMcNully,

   

  (1) you get an error message?

  (2) what version of Windows you are running on the computer?

  (3) given that you filed your request in Internet Explorer (IE), this problem is only limited to IE?

  Method 1: Run the fixit available in the link below

  Problems printing and printing errors
  http://support.Microsoft.com/mats/printing_problems/

  Method 2: You can see the steps mentioned in the article below

  You cannot print or print preview Web pages in Internet Explorer on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/973479

  You might want to know

   

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

• I have W XP, SP3. Suddenly, Adobe reader showed the error: Acrobat could not load the DLL base.

  I have W XP, SP3. Suddenly, Adobe reader showed the error: Acrobat could not load the DLL base. Have Adobe reader X (10.0.1) who refuses to be carried away. Other than a drive X (10.1.0) has been reinstalled. Also have Acrobat reader 5.0 is installed from a CD of the Canon scanner slide. The error remains. If anyone can help. Leif Stg

  Hi Leif,

  Where do you get this error message?

  I suggest you to follow the steps and check if it helps.

  Method 1: Uninstall all the instance of Adobe reader and Acrobat reader and install the latest version of one of the drive and check if it helps.

  http://get.Adobe.com/reader/?promoid=DINRS

  Method 2: If the problem persists, perform a system restore and check if that helps.

  How to restore Windows XP to a previous state

• Canon MX922 printer says that it loses power, one a day while being connected to an inverter

  I have a printer Canon MX922 posting once to twice a day that it is unplugged. When you press OK it restarts, wasting a lot of ink and lose all incoming faxes that he would not print in this mode. This isn't the plug power loss as it is connected to an inverter that signals without interruptions in power. The power for the printer shows resistance cable practically zero. Also it started randomly losing its wifi connection which requires a reboot to zero and wastes even more ink. Of more when you try to turn it off it never will be, showing "pending" in the display for as long you disturb not yet.

  It is not only inappropriate, but very expensive. What can we do?

  The solution to this problem is to update the firmware in the menu in the control panel. It solves this problem of interruption false power irritating.

• Windows XP print spooler 1068 error code

  I have an error code 1068 print spooler.
  The fault has happened today 28/04/2012
  I've been using a Canon MP240 printer for 4 years.
  The print spooler is set to automatic.
  I followed the instructions and I have following error messages
  The dependency Service or group was able to start.
  This message appears in LexBceS & Fax
  I am using Microsoft Windows XP,
  Home Edition,
  Version 2002
  Service Pack 3

  As I wrote when you posted this question identical at the end of the outdated threads.

  I don't really know what "instructions" may be followed.  There are a lot of 'instructions' in the old thread.

  It is also important to give the full text of the error messages, rather than paraphrase as you did.

  All I know is that you have a Canon MP240 printer which does not work because the print spooler is not running.  And the reason for which the print spooler is not running is probably because you were at the same time a Lexmark printer (or a badge printer Lexmark Dell) and this printer has been poorly uninstalled.

  I don't know if your printer Canon already worked and if he did, what happened just before it stopped working.

  You might have noted that I asked several questions of the person who initially asked to return in November.  You have answered them yourself to save time.

  Please provide the full error message.

  Do you now or have you ever had a Lexmark or Dell-badged Lexmark printer installed?

  What happened just before the printer who stops working?

  And what version of Windows is installed, including service pack? [You said it; Thank you.]

  Also, I don't know if you have a fax modem that you want to use Windows XP fax services.  I ask this because when you paraphrased the error message you received, you mentioned 'Fax '.

  Normally, the fax service depends on the service print spooler, rather than the reverse.  If the print spooler service does not start, then the fax service also fails to start, so I expect that you might have seen two distinct error messages. .... But I'm just guessing.

  To save time - and with the caveat that this is based on guessing the answers that you have not yet provided - what follows will likely restore your printing capacity.  You WILL need to do the "special procedure for computers that have or had a Lexmark or Dell-badged Lexmark printer" before you start step A.

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Use of the special procedure for printers Lexmark described below and follow in its first Article.  If still no joy, use the alternative method that is linked below.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.

  A special procedure for computers that have or had a Lexmark or Dell-badged Lexmark printer.

  Open a command prompt window (start > run > cmd > OK)

  Type the following in the black command prompt window and press enter

  dependent on the spooler of sc config = RPCSS
  output

  Note that there is no space before the =

  If you want to use a Lexmark or Dell-badged Lexmark printer after having done the above, you will need to reinstall it.

  Alternative to the method of his Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm