My printer shows to be downloaded and ready, but it will not be printed.

Similar Questions

• Epson Workforce 645 appears as the default on my computer and it says 'ready', but it will not be printed.

  Original title: printing problems

  I am facing a problem with the printer - or maybe a computer problem.  I can't pinpoint the problem.  My printer (Epson Workforce 645) appears as the default on my computer, and it says 'ready', but it will not be printed.  My documents will in Quebec, but after about 30 seconds, the State spends printing, error.  I've tried everything.  (Occasionally), it will display a test page.    Any ideas?

  Hi Julia,

   

  Thanks for posting the question in the Microsoft Community!

   

  You are unable to print and get the error message.

   

  I imagine the frustration you feel when you are unable to print.

  This can happen due to connection problems, malicious content or third-party programs.

   

  1 have you tried all the Troubleshooting steps?

  2 is the computer, or a printer attached to a domain network?

  3. are you able to print from Notepad?

  4. what documents do you speak?

  5 is the full error message?

   

  To check if it's because of connection problems malware content follow the steps mentioned below:

   

  Method 1: Run the troubleshooter

   

  See the site:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-in/Windows7/open-the-printer-Troubleshooter

   

  Method 2: Scan the computer to remove all possible malicious content

  See the site:

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx .

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 3: Clean boot

   

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

  See the site:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135 .

   

  Note: once you are done with the boot, follow step 3 in the article to restore your computer to normal startup.

   

  Note: If in case you are connected through a wireless connection and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check see topic wireless are turned on (Enabled).

   

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• I am trying to download adobe reader, but it will not complete the download because there is a "drive not valid error 1327: J:\. "box that appears

  Original title: I have windows xp.  What does "drive not valid error 1327: J:\. "means and how to fix it?

  Hello

  I have windows xp and I am trying to download adobe reader, but it will not complete the download because there is a "drive not valid error 1327: J:\. "box that appears. I have no idea what this means or what to do.  I didn't know that there was such a unit, because I can not find it. I hope someone can help.  Thank you.

  Hello

  1. are you able to download another program?
  2. you have any program installed download accelerator?
  3. what browser do you use?

  Read the following article that may help you resolve this problem.
  Error 1327. "Invalid drive" | Install | CS4, CS5, Acrobat, Reader
  http://kb2.Adobe.com/CPS/404/kb404946.html

• I gave my brother my old iPhone I brought a new and my brother has already forgotten the password. I plugged in on my laptop and restored, but it will not accept any password. What should I do next?

  I just bought an iPhone 6s and decided to give my brother my old iPhone 5. less than 5 minutes my brother forgot his password so I plugged into my mac and restored, but he does not accept the original password. It will connect now on my mac with out typing me in an access code. What should I do next?

  The following link has instructions for all methods: If you have forgotten the password for your iPad, iPhone or iPod touch, or your device is disabled - Apple supports

• I have a windows xp computer, I try to download adobe reader, but it will not allow me, so I can't open any files I download?

  It is said all the downloads are completed but when I try to open one, it goes to the box to open it, then when I do, I get a blank screen and says new tab!

  Hello

  -Did you change on your computer due to which the question has begun?
  -Which version of Adobe reader you are trying to install?
  -What web browser do you use to download programs?

  I recommend you follow the steps in these articles.
  The problems of download
  Impossible to download, to install Reader | Quick fix

• Windows 7, the printer Dell Photo All - in - one 922; Win7 says it has the most recent drivers, can see the printer, but tells me that the printer needs to "help out." interfacera not; updated drivers downloaded from Dell, but Win7 will not identify them.

  Well, it's a long story, but EDH to; I had problems with my printer works with Win XP. The same problem as now with Win 7.  I have e last driver of Dell, but Win7 says that drivers are up-to-date.  The printer appears in the Device Manager, but has the yellow triangle with (!) to score on this subject.  When I go to troubleshoot, it says it can't find the updated driver on the internet or the CPU.  Win7 says that the printer says that's not covering, check USB port, etc... I uninstalled the driver, let W7 update, and the printer still does not work.  What is the reference for this? Thank you... Corn

  http://support.Dell.com/support/downloads/index.aspx

  You get your Dell printer drivers; NOT through Windows Update.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7, 64-bit OS AM and I tried to download addons/themes, but they will not install in Firefox

  I tried to download (successfully), addons and themes however Windows 7 tells me that there is an error and it does not recognize the software and cannot open it. So can not change or add to Firefox. AM also using Word 2010 sxo don't know if this is causing the problem.

  If download you the XPI file, then you can use file > open the file to install the extension.
  
  It is easier to install the extension directly on the site with a left-click instead of save the file.

  See also http://kb.mozillazine.org/Installing_extensions

• Can someone help me get my printer to print? The State indicates printer ready, but it will not be printed.

  I have a wireless Dell V515W printer. Currently it is USB connected because the wireless isn't good in my area. I tried to print from yesterday. I can make copies but can not print anything from my message or incoming mail at all.

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• I have updates for microsoft office and works, but they will not update it comes back with an unknown error 80070641

  Updates fail everytime my computer try to install

  Hello

  1 are you facing this problem with this update alone?
  2. which edition of Microsoft Office you have installed?
  Please follow the links below to help solve the
  Method 1
   
  How to resolve problems connecting to Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/818018/
  Method 2
   
  You cannot install some programs or updates
  
  http://support.Microsoft.com/kb/822798
   

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

   
  Method 3
   
  You can run the system preparation tool to help resolve the issue:
  
  Update for Windows 7 system tool

  http://www.Microsoft.com/download/en/details.aspx?ID=20858

  I hope this helps.

• I download the file but it will not be installed

  Had trouble with the slow operation. Support MAC says reload disk from osx. Who and now I 10.6 but I lost 10.6.8. Can't seem to get it back. I tried to down load the 10.6.7 but it won't install.

  Mac OS X 10.6.3 update

  Start here and then upgrade to 10.6.8.

• bought LR5 and installed, but it will not load the catalog or not work at all; get the message ' year error occurred when trying to exchange of modules.

  had the same problem with the trial version.  Have need/ability iMac with Mt. Lion.

  On the cat line of no use, or help files.  Thank you!

  HR

  Follow the procedure below.

  Click on Finder and hold command + SHIFT + G keys on your keyboard.

  To go to the folder window type exactly ~/Library and click Go

  Open the Application Support > Adobe and right click the Lightroom folder and select Get Info

  Under sharing and permissions Click on lock and unlock

  Click on add your username and the administrator if not added

  Then give permission to read and write to Admin, system, everyone and (your user name)

  Click the gear icon and choose apply to attached article

  Then click on lock

  Launch of Lightroom and check.

• The Epson Workforce 600 is connected via a usb cable, the other is a wireless network. I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it does not list

  I have two printers installed on my laptop, only appears.  The Epson Workforce 600 is connected via a usb cable, the other is a wireless network.  I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it is not the list when I go to print something.  When I select "Find a printer", it gives me a list of computer icons.

  Hello

  Check with Epson support, their documentatiion online and drivers. As it's Epson OEM
  responsible for the proper functioning of the printer and their drivers provided.

  Good luck, you need to update or reinstall the latest driver.

  Epson - Support us.
  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes

  Epson - support from Europe
  http://www.Epson.co.UK/support

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I downloaded Open Office, but it does not show in my Applications. Only an icon shows on my desktop

  I downloaded Open Office, but it does not show in my Applications. Only an icon shows on my desktop and when I stop I have to re - download.

  Where did you put it after installing it, it should have been in the Applications folder, was it?

• Ive downloaded the software but its was not and do not know why. Help me?

  Ive downloaded the software but it has not installed on my mac and don't know why

  Are what software you referring?

• I downloaded the last Adobe Flash - it is said to be successful but will not work. What he says "Manage plugins but the plugin says it is enabled, but it will not work." I have tried disabling and then enabling - without success.

  I downloaded the last Adobe Flash - it is said to be successful but will not work. What he says "Manage plugins but the plugin says it is enabled, but it will not work." I have tried disabling and then enabling - without success. Help, please!

  There are two different versions of Flash. ActiveX for IE version and the version of the Plugin for other browsers. Have you installed the correct version? This forum software is not thing that Flash is installed for Firefox or the Plugin is disabled.

  1. download the file of configuration Flash from here:
  
  Adobe Flash - Plugin version.
  
  Save it to your desktop.

  2. close Firefox using file > exit
  
  Then check the Task Manager > processes tab to make sure that firefox.exe is closed.
  
  {XP: Ctrl + Alt + Delete, Vista: Shift + Ctrl + ESC process tab =}

  3. then run the Flash configuration from your desktop file.

  4. run Firefox and test your installation here: https://www.adobe.com/software/flash/about/

  • On Vista and Windows 7, you may need to run the installer of plugin as administrator by starting the installation program via the context menu if you do not get a UAC prompt for permission to continue (that is to say that nothing seems to be happening).

  See this:
  
  http://vistasupport.MVPs.org/run_as_administrator.htm