Error B200 on Canon MP620B printer

Similar Questions

• I have a Canon ip6600D printer which only becomes an error 6500, cleared error now no printing

  I have a Canon IP6600D printer and today it started acting.

  First of all, I found it turned off earlier today and I had problem trying to lights up but finally did and received an error message indicating an invalid legacy was plugged in to the printer - remove the device.  Nothing new has been connected to the legacy just usb that connects to my laptop.

  After about an hour of playing with the printer, unplug the unit, unplug the USB cable, turn on / off power with and without the USB cable, the message changed to an error message 6500.

  I played with it for about an hour, trying several things, on and outside, opening the lid with the inks and pressing the power button, etc... saw a message about a reset, which doesn't seem to work at first, but I tried once more to the power of the printer and everything seemed fine.  He showed several inks were out, so I replaced them with new cartridges and now no impression at all!

  I tried to send a word document that is black and white, went by his movements, seemed it was printing, but the page is empty.  I tried to send a picture of the PC - again took time to print the photo, but the page is empty.  I tried to use an SD card to print a photo and even once - took time and sounded like it was printing, but the page is empty.

  I tried to clean the heads, print an alignment page, etc..., all the basic things to correct the wrong impression but still nothing but perfect blank pages - no ink at all.

  Any suggestions?

  Hi Stevenoh,

  It is recommended that you contact the direct technical assistance. There is NO charge for this call. Information in real-time to a technical assistance call live would be very beneficial in this case.

  Please call 1-866-261-9362, Monday - Friday 10:00-10: 00 ET (excluding holidays). A Canon technical support representative will be able to solve this problem more quickly.

• Canon MX700 printer does not work

  After the update of El Capitan on my iMac, my Canon MX700 printer does not work. UGH!

  Mine has stopped working on Yosemite.  You have an old Mac OS X installed you can test it on?  You can run the test page for the printer itself?  I get the right error messages try to run the printer, and I ended up Canon to accept to sell me a MX922 at a discount.

• Canon mp640 printer and I am running Vista Home Premium. My email is Comcast. I can't print my email address

  original title: Debbie

  I have a Canon mp640 printer and I am running Vista Home Premium. My email is Comcast. I can't print from my email address. The error I get is as follows:

  An error has occurred in the script on this page.

  Line: 2107

  Char: 1

  Error: Unexpected call to method or property access.

  Code: 0

  URL: res://ieframe.dll/preview.js

  Please help me.  I called Canon nothing is done.

  In fact, I already did what you said but it doesn't work. There is a conflict between windows explorer 9 and my canon mp640 printer. Microsoft consumer support figured this out for me.  What we have done is to uninstall internet explorer 9 and returned to internet explorer 8 and since that my printer works fine.

• Replaced fried DLink router with Cisco Valet wireless, internet connection OK but can not print on Canon MX860 printer?

  As in the title, power storm seems to have fried the step-down transformer and router DLink.  Replaced this morning and only took a few minutes to operate wireless router Cisco Valet for wire hard PC and wireless laptops.

  However, it seems that my Canon MX860 printer is not found by the network.  It can be located by control panel of Windows Vista and I have uninstalled and reinstalled twice.  But when I try to print I get the error message "printer not found."

  Help.

  Hello

  If this is a network printer ready to reconfigure the printer to match the new router.

  If it resets in a different IP, you need to set the printer to the computer for the game too (see the manual of the printer).

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Windows Update keeps reminding about driver Canon MP560 printer

  Win Update continues to remind me of an updated driver that I have already installed via Win Update (Canon MP560 Printer driver). Why?

  I get an update Canon MP560 series printer driver is available after I have already installed this driver through Win Update. Installed several times with the same results.

  You should get no 3rd hardware part from Windows Update drivers.

  You should always get them directly from the hardware manufacturer.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Can't print or scan documents with Canon MG2470 printer (2400 series)

  Original title: install a driver for the Canon 2400 series printer

  Hello

  I am currently not able to print or scan documents with my Canon MG2470 printer (2400 series), that worked perfectly until a few days ago.

  I tried to reinstall the software of the printer, including the driver, but the latter does not settle.  The control panel displays a yellow triangle with an exclamation mark against the Canon 2400 printer, but when I "fix" the problem, it remains unresolved.  Accordingly, my 'Cute pdf writer' is set as the default printer that is not of much use.

  Regarding documents scanning with the same printer, I now get the error code 5156.69 to come, but I don't seem to be able to solve this problem either.

  Any help on this issue would be appreciated.

  Norman

  Hi Norman,

  This problem can occur because of corrupt drivers, incompatible drivers, due to the printer settings, missing updates, and problems with the printer.

  Please follow the steps mentioned in the following link:

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I also suggest you try to install the latest version of the printer driver and software from the printer manufacturer website. Consult the following link:

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg2420#DriversAndSoftware

  Please answer us on the State of the question you tio assist also.

• Home premium to Windows 7 64 bit - ip 2700 canon will print is no longer

  This printer will print the test page when prompted, but won't boot with the word perfect or word or documents of any software.

  This printer print for 1 day. Canon has been contacted and updated drivers have been installed.
  A check of the log of application for printing services services - identifies a spooling print error 2114 - could not share printer on the network. This error started with a connected printer earlier and continuing with this printer.
  Can someone help

  Try to run the troubleshooting of the printer utility.
  Click Start.
  In the search bar, type troubleshooting.
  Select the printer in the list and click Next.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
  Step 2:
  Also update the printer drivers in the Device Manager. Click Start and in the bar search devmgmt.msc and press ENTER.
  Step 3:
  Accounts of comments WE turn on both computers.
  Step 4:
  Configure file sharing / print:

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Turn on WE network discovery
  Turn ON file and sharing printers
  Put IT in the section sharing public folder
  Turn ON password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, running on Windows 7 sharing files and printer as above will take care of this for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine. With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. Don't STOP FIREWALLS; CONFIGURE them PROPERLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT CREATE PASSWORDS, EVEN IF ONLY the MOST SIMPLE . If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  D. Si one or more of the computers on your network are XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. In Windows 7 I usually share the Desktop of the user and the Public directory.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers.

  Troubleshoot network printer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
  For your reference:
  why cant I print http://Windows.Microsoft.com/en-us/Windows7/
  http://Windows.Microsoft.com/en-us/Windows7/printer-a-part
  http://Windows.Microsoft.com/en-us/Windows7/Install-a-printer-on-a-home-network
   
  PIXMA iP2700 - replacing a FINE cartridge

  Contact Canon for more help.
  Canon Europe - contact US

• My canon s200spx printer does not work on windows 7. I can't find a drive

  My canon s200spx printer does not work on windows 7. I can't find a drive

  Hello

  1. do you have a code error message when you try to print?

  2. don't you make changes to the computer before the show?

  3. you are unable to find the drivers for the printer?

  I suggest for the link and follow the steps in the article:

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can also download and install the latest drivers from the manufacturer's website:

  Reference:

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/s_series/S200#DriversAndSoftware

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Problems with error 1053 and start my printer spooler

  Hi, I also got an error 1053 come when I am trying to install my new Canon MP250 printer to my laptop with Windows 7 installed.

  Can anyone help?

  Hello

  A 1053 would occur if the service does not correctly record his status as started with the service control manager.

  Difficulty for the spooler service dependency information from and then restart the print spooler service and check if it helps.

  Step 1: difficulty for the spooler service dependency information

  Click Start, run and type the following text:

  CMD /K SC CONFIG SPOOLER DEPEND = RPCSS

  Alternatively, to achieve this by using the Registry Editor:

  1. click on start, run and type Regedit.exe
  2. navigate to the following branch
  HKEY_LOCAL_MACHINE-SYSTEM-CurrentControlSet-Services-spooler
  3. in the right pane, double-click the DependOnService value
  4. remove the existing data and then type RPCSS
  5. close Regedit.exe

  Important This method contains steps that tell you how to modify the registry. However, serious problems can occur if you change the registry
  incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then, you can
  restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to display
  the article in the Microsoft Knowledge Base:

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry  

  Step 2: restart the spooler service print;

  Follow the instructions below to start the Printer Spooler service.

  1. click on start.
  2. type services.msc in the search to start.
  3. right click on the Printer Spooler service and click Start.
  4. on the general tab, next to startup type, make sure that automatic is selected.

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  You can also check this thread for more suggestions:

  http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/38b019cf-44BF-4123-A39E-09c025f89da9/

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Z3100 Wide Format Printer: error 86:01 on a printer Hp DesignJet Z3100 44 "

  Hello

  I get an error 86:01 on my printer. I replaced the belt because he was worn out but get this error code. He would suggest a paper jam but after inspection, this isn't the case.

  The trolley stops above the Service area with the showing error code suggesting (according to Hp service manual) which could be the problem area. Suggestions?

  Thank you

  Roger

  Hello

  Probably the socket transport is broken.

  Extract the carriage and take a peek.

  Also, make sure that the belt and cable leakage are correctly installed

• I'm unable to connect a Canon wireless printer to my Time Capsule / Airport utility

  Looking for advice on how to connect to a Canon wireless printer to my wireless (Time Capsule).  Airport utility does not see an option to add a WiFi printer.

  If you are referring to the method of adding a printer WPS...

  Open AirPort Utility

  Click on the image of the time Capsule

  Click the Edit button in the window that appears

  Click on the menu of The Base Station ... up where you see the icon Apple, file, window, help and other menus at the top of the computer screen top

  Click Add a WPS printer

  

  There are two methods available... . First of all try (which is identical to a button press the Time Capsule) and PIN, using a code. Choosing the right method according to the instructions provided in the installation Guide for your printer.

• El Capitan is compatible with Canon Pixma printer?

  The new Mac OS is compatible with Canon Pixma printer

  It is compatible with my 3 printers Pixma Canon's (MP830, MX922, Pro9000)

• How can I find Canon CP910 printer drivers for use with OS10.11.3?

  How can I find Canon CP910 printer drivers for use with OS10.11.3?

  Download the player package Cannon from Apple or get your driver from the Canon support site.

  V3.3 Canon for OS X printer drivers

  Canon Laser Printer Drivers for OS 3.1 X

• Canon MX850 printer not verified by El Capitan

  Hi - I have El Capitan and tries to install my wireless Canon MX850 printer. I installed the latest drivers for Canon (11.7.1.0) and put in place the printer in printers and drivers. However, when it comes to test the printer, it does not. The printer is connected via wifi. Router is fine, other computers can access. I tried the fixed IP address - but that doesn't work either. It is simply not to find it. Any ideas?

  This means you enter wrong IP address in the configuration dialog box, you select a communication protocol that does not support the printer or the printer is inaccessible on the network. If you try to use a shared printer from another computer or from a device such as a router, verify that the printer is actually shared. OS X printer sharing could be disabled without your knowledge.