Canon MG4260 printer Wireless Installation for PC laptop Toshiba failed

Similar Questions

• How can I install Canon mx920 for windows laptop Toshiba 8?

  How can I install Canon mx920 for windows laptop Toshiba 8?

  Can someone please help? I've never done this before.

  Any help or advice would be especially appreciated, thank you.

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  You can download and install the driver for the printer from the Canon support Web site. You can check the link below:

  https://www.usa.canon.com/internet/portal/us/home/support/details/printers/inkjet-multifunction/mx-series-inkjet/mx922/pixma-mx922/!ut/p/z1/hY_BbsIwEES_pR9g7copKTmaAEqqmAqEwPhSWSgJC8REiakQX48DXBCC7m123mh3QIMCbc0flcbRwZq91ysd_spp0k_SGLOfMR-hkPNFJoM0wFkIy_8A7W18MQLh-wq8yfsPeCNjWYKujdswssUBVN2QdXnTgiK72-aOVce9o-Jo193joKoTa_OG8pbd_G4Tce6DdKoMu4kl6MfrOIu-UITDMIkmA0ynvSdgMfj0QDSMAz7uGtyBNwXrSp0zkSCl4uMCBzKuoQ!!/dz/d5/L2dBISEvZ0FBIS9nQSEh/#drivers_downloads_tab

  Please make sure that you select the correct architecture of Windows 8 (32-bit or 64-bit) while downloading the drivers.

  You can also consult the user manual that you could receive with the printer for the initial Setup.

  Hope this information was useful.

• I plugged a wireless mouse for my laptop, but I can't seem to disconnect the touchpad

  I plugged a wireless mouse for my laptop, but I can't seem to disconnect the touchpad, what should I do?

  Hello Roberto,

  On how to disable the trackpad on a DELL computer, contact DELL.

• Which hard drive buy for my laptop Toshiba Satellite 15.6 "3 GB HD 320?

  After receiving an error of 10-FA12 - 054D and do not recover my laptop to zone out, I believe that I have to buy a new hard drive.

  Which hard drive buy for my laptop Toshiba Satellite 15.6 "3 GB HD 320?

  You can check the Toshiba site for which specifications you need.  A general rule is to buy something at least two times greater than the one that failed, because the data use and therefore the space doubles every 18 months.

  You may want to consider a large enough to allow you to make backups and store in another partition

• HP LaserJet Pro P1102w: HP LaserJet Pro P1102w Wireless Installation - adding other laptops and desktop PC...

  Hello

  I have a question about computers adding more to my HP printer.

  I followed the instructions & so I can print wireless from laptop, I used during the installation (after removing the USB cable).

  I can also print wireless from our various iPads & iPhones (after the change of the printer WiFi).

  But I don't see how I can 'Add' laptop (Windows Vista) daughter & my main desktop computers (Windows XP), so they can print wireless too!

  Does anyone know how to do this?

  I tried to launch the installation of the drive on my laptop HP printer girls. He was able to recognize the printer, but was unfortunately unable to print.

  For any help or suggestion would be appreciated.

  Thank you very much

  Simon B.

  Hi & thanks,

  I also found a solution to install my printer HP LaserJet Pro P1102w wireless & connecting then 2nd, 3rd & subsequent laptop/desktop computers.

  I initially reset the printer to remove any configuration, then I did the following:-

  Install on a laptop using a CD or could start simply by connecting the USB cable to the laptop. Follow the instructions, test the characters etc. (to prove that the wireless network is configured correctly)).

  Check printing wireless since this laptop computer 1 initial works, & also works various iPad/iPhone etc.

  Problems have been met when try to get other laptops/workstations to print wireless (2nd & later).

  The following seemed to work: -.

  On the other portable computers desktop (do not plug printer with USB cable): -.

  (1) the installation of the CD,

  (2) choose the series w1100 - Wireless install,

  (3) choose to install the printer software (& display the Guide of the user if want),

  4) click Add another printer (option 1).

  (5) choose HP LJ P1100w Pro Series.

  (6) choose option 3 (to connect to a network configured wireless (that established earlier),

  (7) following, a lot of software is installed,

  (8) identify the printer by choosing the method to identify it (select in a list),

  (9) side of firewall pinhole (all).

  (10) looking for printer, concludes HP LJ Pro P1102w,

  (11) then the TCP/IP data has been: -.
  IP 192.168.2.46
  Subnet 255.255.255.0
  Gateway 192.168.2.1

  Host Name NPI1C754F

  (12) (stupid 'password required' kept appearing several times - X box to close),

  (13) to enable direct printing,

  (14) then,

  Finally success!  A test prints to computers/idevices like many that I could find.

  Thank you very much. I hope the above can help someone else!

• USB wireless adapter for computer laptop problem

  Hello:

  The HP laptop with XP get "Low" signal every time I'm in the other room that is not too much longer off the router, about 60 to 70 feet away from him.  Then, yesterday, I got USB Netgear adapter in the hope of trying to get more signal.  Because, says a guy in the store of the computer installation USB adapter is 'boost' to get decent and more signals.

  When I installed the Netgear adapter for the laptop, there is no signal at all and to appear the following message appears in the middle of the screen.

  NETGEAR 111v3 Smart Wizard, WEP Passphrase to create WG and the key manually

  My question is;

  How to install the USB Netgear adapter for laptop?

  Thank you for your help in advance.

  Hello

  The general idea that a USB adapter is a bit a booster dose is false. I'm not sure that you will get the USB Ant thing you don't get the laptop.

  According to the physical environment, 60 to 70 domestic feet with walls is probably beyond the capacity of the wireless router.

  As for your specific question, it seems that USB is correctly installed but must adjust its password security to your current wireless network.

  In general.

  My wireless is not working - http://www.ezlan.net/wireless.html

  Basic wireless configuration - http://www.ezlan.net/Wireless_Config.html

  Wireless Security - http://www.ezlan.net/Wireless_Security.html

  Extending remote - http://www.ezlan.net/Distance.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• 2542 printer all-in-one: print wireless from my Acer laptop problem

  My printer is about 18 months old. Originally, it worked perfectly when installed everything first, a year ago, he stopped wireless printing. HP support person came on my laptop on the internet and took 45 minutes to make it work again. I didn't do anything, and now a year he stopped again to print wireless.

  My Acer laptop will print with a USB cable

  It will also communicate wirelessly with the levels of ink printer control etc.

  I can print E wireless from my Samsung Tablet and Samsung mobile.

  When I try to print wireless I get error message printer.

  I wouldn't change a thing, but I don't know about microsoft or Norton auto updates

  If you have recently installed Norton Security or received a new patch to update/update for Norton Security, you may need to reconfigure the settings of network devices later.

  Harry

  Norton support

• HP Officejet Pro 8600 N911g cannot print wireless AirPrint or desktop/laptop

  Hello

  My systems are all running Mac OS X 10.8.2 (Mountain Lion). I have a Linksys E4200 configured for 5 GHz Wireless-A and 2.4 GHz Wireless-G. For testing purposes, I have firewall of the router disabled.

  Here's what I CAN do:

  -connect to the Web server for the printer (printer is correctly connected to the wireless network)

  -print using ePrint (printer running mechanically)

  What I can not do:

  -Install the printer in OS X

  -printing of my office/computer systems portable

  -printing of my devices via AirPrint

  I tried the following:

  -reset the network settings on the printer

  -restart the router

  -restart all systems

  Error messages:

  -System preferences print & Scan shows the printer as "near printers: Officejet Pro 8600 [CBE189].

  -in installation "settings until 'Officejet Pro 8600 [CBE189]" configuration of the device... ". "returns with"Unable to communicate with the printer at the moment"and I have to cancel installation

  -When printing using iOS devices, I can choose the printer, but any print job expires.

  Any help would be greatly appreciated!

  Thank you!

  Too bad! Solution found - unplug the power cord, wait 30 seconds, plug it in again. Pop, it works. (So old-school)

• I can plug a desire 5530 printer wireless HP for my HP Pavilion a1610n

  I'm looking to plug the printer wireless to my desktop (2006) older, so we have a connect our laptop and a smart phone all on the same network. I have the cable with a router to operate the laptop and smart tv.  Can hold this office until this printer and if so, a few basic instructions would be great, and if not what printer do you suggest?

  Hello

  You have now several devices/wireless devices, only the old PC is NOT currently on your wireless network. My suggestion:

  b connect the printer to your network home and it will work with your laptop, iPhone, iPad,... you name it.

  (b) connect the old PC to the router using a cable (the old PC has a LAN port) OR if you wish, just buy a PCI Wireless card for your PC and it will become a wireless device. A card that is similar to the next map will do:

  http://www.Dlink.com.au/products/?PID=821

  Kind regards.

• HP Pavilion 15 laptop: Wireless Driver for my laptop HP Pavilion 17

  Hello

  I need to find the right driver wireless for my laptop HP Pavilion 15 (8 64-bit Windows).

  For network controller hardware ID:

  PCI\VEN_14E4 & DEV_4365 & SUBSYS_2230103C & REV_01
  PCI\VEN_14E4 & DEV_4365 & SUBSYS_2230103C
  PCI\VEN_14E4 & DEV_4365 & CC_028000
  PCI\VEN_14E4 & DEV_4365 & CC_0280

  Hardware for the PCI device ID

  PCI\VEN_10EC & DEV_5227 & SUBSYS_227E103C & REV_01
  PCI\VEN_10EC & DEV_5227 & SUBSYS_227E103C
  PCI\VEN_10EC & DEV_5227 & CC_FF0000
  PCI\VEN_10EC & DEV_5227 & CC_FF00

  For PCI Simple Communitcations controller hardware ID

  PCI\VEN_8086 & DEV_9C3A & SUBSYS_227E103C & REV_04
  PCI\VEN_8086 & DEV_9C3A & SUBSYS_227E103C
  PCI\VEN_8086 & DEV_9C3A & CC_078000
  PCI\VEN_8086 & DEV_9C3A & CC_0780

  All the foregoing is present in my other devices category in Device Manager, I don't know exactly who is responsible for the wireless.

  Any help in this regard is highly appreciated!

  Hello:

  You can try these drivers, but if they don't work, you need to connect via ethernet cable, do the updates required for W8 and then get the free update for the Windows store W8.1.

  Network controller:

  Broadcom wireless LAN drivers are required to activate the built-in Broadcom wireless LAN adapter.

  FTP://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69737.exe

  PCI device:

  Download, unzip and run the setup.exe file from the link below... first driver listed.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 15 & PFid = 25 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

  Simple controller PCI of Communitcations:

  This package provides the driver Intel Management Engine components for some laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67047.exe

• Can not find the driver for my laptop Toshiba satellite CD/DVGW TS-L632D ATA MK1637GSX ATA) I can't find it on the site of Microsoft or Toshiba, to download the driver.

  problem to find a driver for my Toshiba satellite laptop that has a CD/DVGW TSST Corp TS-L632D ATA MK1637GSX ATA

  pilot info (which is apparently a published Microsoft driver) for the device in the computer laptop Toshiba Satellite P200-RT5, full info about 2 years is:
  TSST Corp TS-L632D ATA MK1637GSX ATA CD/DVGW
  Windows version: 6.0.6002.18005 created: 21/06/2006;   modification: 04/10/2009;  size: 65.5 KB; Description of the file: SCS1 CD-ROM drive.
  I can't find it on your site or Toshiba. My driver I think is damaged. My Device Manager, in properties, said to me:
  "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Need a video driver that is compatible with WDDM for a laptop Toshiba Satellite P20. My screen, using Windows 7, is a mess.

  Other web sites "might" be able to guide on how to update the drivers for a laptop nVidia.  A 'good' web site is Guru3d.

• HP Deskjet 3000: Problem WI - FI wireless connection for computer laptop-flashing blue light on the printer

  Blue light on my printer is blinking and laptop unable to connect to print

  Hello
  
  Thank you for using the HP forum. You can try the following:
  
  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem
  
  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926 & h_lang = on & h_client = s-h-E016-1 & h_keyword = DG - PDU
  
  Hope that helps.

• How to connect a printer wireless to my XP laptop, the wizard does not allow wireless connections

  I have a Brother MFC-5895CW printer connected to my BT home hub and use it with success from other laptops with windows 7 of Mac operating systems.

  However, I am struggling to connect my XP Edition family Lap top.

  When I try to "add a printer" I don't get the option to install plug-and-play printers and therefore cannot find the printer that is already installed on my network wireless.

  Can someone please help.

  Thank you

  Paul

  Hello Paul,

  Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you with this problem.

  Here are some steps you can try:

  Method 1:

  Run the fixit of the printer and check:

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/en-us

  Method 2:

  Try to download the driver from the following link and check:

  See complete software & driver Package or Add Printer Driver Wizard (Microsoft WHQL certified*) from the following link:

  http://welcome.solutions.brother.com/BSC/public/us/us/en/DLF/download_index.html?reg=us&c=us&lang=en&prod=mfc5895cw_us_eu&dlid=&flang=English&OS=7&type2=-1

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For further reference:

  To connect to a printer on a network

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_connect_net_printerw.mspx?mfr=true

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  Hope this information helps. If you have any questions do not hesitate to answer, we would be happy to help.

• Pavilion dv4: Installer for HP laptop drive

  This laptop came with Windows 7 pre-installed.  The hard disk starts to die.  Is it possible to get a Windows 7 installation disc (OEM I guess) so I can re - install Windows on a new hard drive?  Or do I have to go through Microsoft for this?

  You have created a recovery media using the software on your laptop? This can be used to boot and install Windows 7 on a new hard drive.

  Recovery media creation >Windows 7