Portege R830 - screen problems

Similar Questions

• Portege R500 screen problem

  My Portege R500 screen is a light quite leak in the edges and it is impossible to display anything on the sides.
  It is very difficult to watch videos. Black is dark gray.

  Can I have a defective unit?
  Is it possible to fix this screen to warranty service?

  How is your R500 screen?

  Hello

  I'm not quite sure of what could be the problem exactly. There may be something wrong with the FL inverter, but it is my personal suggestion.
  To get a detailed fault diagnosis audit specifications would be necessary.

  > Is it possible to fix this screen to warranty service?
  If you warranty is valid that everything should be done for free just contact the ASP in your country and ask for later handling.

  The technician of the authorized service provider should be able to provide more details and should help you.

  Good luck

• Satellite R830 screen problem - dead pixel

  Hello

  I have a Satellite R830, I haven't used the laptop a lot since the purchase 2 years ago but I have several white spots on the monitor (8 + areas). I suspect that these may be hot spots of pixel, but I've tried all kinds of software and even slight pressure repair but nothing seems to work.

  Someone at - it Advisor on methods to try to resolve this problem or am I resolved to try to get this repaired?

  Thank you

  Hello

  You can not fix it
  In this case the display must be replaced.
  But I guess that the guarantee is no longer valid, so you pay for the replacement.
  I think that it is not worth.

  I also found information on the technology screen and tolerance fault pixel of the LCD poster
  http://APS2.toshiba-tro.de/KB0/TSB9502LZ0000R02.htm

• Portege R500 screen problem - some artifacts appear

  Hello world

  I bought the R500 at the end of August 2008 and from the beginning I had problems with my laptop screen.

  Indeed, after two days of use I see it on the screen an artifact as if something had hit.
  Of course not ;) so I called the support number to replace the notebook (less than a month after buying it).

  I get a new, and I checked the screen immediately. Perfect, no artifacts and everything seems to be good...

  But for 1 month (end of November), I saw again new artifacts! In fact, the artifact are really visible if you don't look at the screen perfectly in front of me. Indeed, in this position, the objects are less visible...

  So my first question:
  -Someone else you have this kind of problem?
  -I have to contact TOSHIBA support to replace my screen once more?

  ... It's really frustrating to buy a laptop more than 2000 at a society that says to had produced solid and have twice the same problem...

  Thanks for you comments and help...
  Concerning
  Renaud

  Hello

  I've got 3 different laptops Toshiba, but something like that never happened to me.

  I think you should contact the ASP from Toshiba (certified partner) and should ask verification of the laptop / screen again.
  It certainly looks like the issue of the material and the affected part must be checked and replaced.

  Good luck

• Portege R400 screen problems when wireless is enabled

  Hello

  I'm a big fan of my R400, but he has a problem, I can't get rid of that.

  When I use it via evry 5 minutes wireless the done screen a total refresh of each window to reset the mouse in the middle of the screen. If I have a few windows open, it can take quitge seconds and almost never ends up on the window, that I am. Really annoying!

  Any ideas how I can stop what is happening?

  Concerning

  Alan

  In this case please proceed as follows:

  -Update your operating system (Windows update)
  -Update ALL your drivers (hardware drivers)
  -Update your installed applications

  Check if the problem persists, if yes, then does a full recovery of the system on your machine.

  Please give feedback on your success.

  Greetings

• Portege R830 had dead blue when the screen connects to wifi or shared internet

  It seemed began as soon as the automatic update from Microsoft on Qualcomm, Atheros, every time when connect to any WIFi, share internet, my portege R830 shows blue screen and the following error message:
  unhandled system_thread_exception (athwb.sys)

  I found that I am not the isolated on the Web site. I tried to remove and stop updates. However, once I connect to the internet, the blue screen comes back.

  Is the problem because of the network adapter? The model is Qualcomm Atheros AR9002WB
  Can solve the problem if I download the new driver of Qualcomm-Atheros site? Or if I replace a new adapter?

  The athwb.sys file belongs to the Atheros wireless driver. Usually placed in C:\Windows\System32\drivers\athwb.sys
  It seems that in your case this file causing the BSOD.

  I found a very interesting detail about this problem and why it seems.

  A user wrote:
  {quote} The issue is due to a database hosted on Linux kernel mapped NAS drives and if the Client for NFS is installed on the windows machine. For some reason, this configuration does not work. If you mount your shares and NFS is installed it tries to use the NFS client and fails miserably. Trick is to disassemble all the shares of logging in Safe Mode and then rebooted and uninstall the NFS client and then mount your shares. {quote}

• Portege R830 blue screen

  Hello

  I have problem in my business with one of notebooks and the problem is that when I connect dynadock on my portege R830 my portege screen flashes a few times and then I get a blue screen. The portege and dynadock are new and the portege has a preinstalled Windows 7 pro. I already reinstall the drivers for the display drivers and dynadock and always some problem.
  you have an idea?

  BR, Toma!

  What is a BSOD or just a blue screen?

  What color is the background wallpaper on your pc the value? even in blue white?

• Portege R830 - problems of 3G connection after installing Win 7 32 bit

  Hello

  I went down a Portege R830 Windows 7 64 bit for Windows 7 32 bit with drivers of Toshiba. I put a SIM from my provider.
  In the windows Network Manager, 7 and in the Toshiba Wireless Manager I can see the right provider and HSPA network but when I start the connection, it does not (I don't have a PIN code).

  It is failed with Windows 7 Network Manager and Manager Toshiba wireless (I don't have this problem with the Portege R700 windows 7 32bits)

  But I found a small solution (but I think that's not enough):
  I have created a dial-up connection, with a number * 99 #,.
  I started the connection, it does not happen, but after that, when I raise my first connection is good.

  I don't know why, it's as if the modem is in sleep and the dial-up connection wake-up the modem, because after all is good (win7 Network Manager, Manager wireless Toshiba) so if I reboot the Portege.

  I want to avoid the dial-up connection on my r700 portege with 32-bit windows 7

  Thanks for your help and sorry for my English.
  support for the toshiba told me to reinstall windows 7 64 bit to solve the problem :)

  Hello

  Are you sure that you have correctly configured the connection?
  Here is a nice FAQ that explains step by step how to connect 3G using the Toshiba Wireless Manager:

  + How to configure and set up a 3G connection via the preinstalled Toshiba Wireless Manager +.
  http://APS2.toshiba-tro.de/KB0/FAQ1A037W0000R01.htm

  and here you can find instruction how to create dial upward of connection using own configuration of Windows.

  + How to create a Dial-Up connection with 3 +.
  http://APS2.toshiba-tro.de/KB0/HTD9802OF0000R01.htm

  Recommend check them both!

• Sound when Portege R830 is anchored and display lid is closed

  I have a fairly new Toshiba Portege R830 laptop (PT321E-01E00YEN) who don't use speakers integrated if it is placed in a dock with the closed laptop screen or the microphone.

  This causes problems when you try to work from only an external monitor, but when I flip the lid open, it works fine.

  I am using a replication of port II (PA3916B) and once installed a month ago, all device etc drivers has been updated to the lasted available so I think that there is a software configuration option that just needs to check or disabling.

  No one knows where that might be?

  I test this on an another older duplicator that has been purchased for a R700-15R and have exactly the same problem, so I don't think it is hardware related.

  Any help would be greatly appreciated :-)

  Please don't get me wrong, but to me this behavious seems logical. When you close the lid internal speaker and microphone placed close to the cam are blocked so I don't know how you want to use.
  When the laptop is closed and set aside, it's almost the same as the office. All devices that you need should be connected to the docking station and external devices.

  If you use your laptop on a regular route, but they also appear external to office extension, you can use all the internal devices to your laptop.

  In my opinion the point of berthing of the use of the station of different devices to your laptop, but using the docking station, you can remove the laptop and take it with you without disconnection of all connected devices, including the power supply.

  To be honest, I see here no problem. You can contact Toshiba service nearest and ask for opinions, but I'm sure the answer will be the same.

• Portege R830-10R: No. USB connection after recovery from sleep mode

  Nice day!

  I have experienced the problem depending on my Portege R830-10R for a long time.

  Quite often, when he recovers as soon as "sleep" mode it loses the ability to recognize USB devices and built-in 3G modem does not work as well.

  After awhile, like 10-15 minutes of work (or), the problem is solved by itself, but normally, it is not the case.

  If I try to send the laptop to Hibernate or "standby mode" again, while this problem is active, allows to say, it not put into hibernation and crashes on a midway with a black screen - so I have to stop it manually, and then start again.

  Normally, the only way to solve the problem is to restart, but the issue comes after the next "standby".

  Someone has something like this? Any solution available?

  Hello

  > Quite frequently, when he recovers as soon as "sleep" mode it loses the ability to recognize USB devices and built-in 3G modem does not work as well.

  Have you noticed this behavior from the first day of purchase?

  Only special USB devices assigned as USB flash memory stick or USB HDD or are
  other devices such as the USB mouse or USB keyboard has also affected?

• Portege R830 - use of fingerprinting as part of Windows 8

  I have big problems with two drivers Toshiba on my Portege R830 computer in Win 8 Pro 64 bit upgrade.

  I did a clean update on a reformatted hard drive, then went to install display drivers and that totally crashed my machine out.

  When I put in my IDs of the machine would do a reboot of the force.
  Finally, I am in safe mode (with SHIFT-restart the login screen) and was able to fix it and remove the driver.

  Then I installed the utility of fingerprinting, this week still downloaded from Toshiba for my machine.
  He even marked as "new".
  That actually worked, in a way, but it caused my login icons user on-screen connection prior to appear as duplicates.

  Took me forever to understand it is the utility of fingerprinting and when I removed the user icons are returned to normal.

  So now the fingerprint reader is useless for me.
  In the hope of a solution soon.

  > So now the fingerprint reader is useless for me.
  > In the hope of a solution soon

  Have a look here:
  * Windows 8 Upgrade - Notes and Restrictions *.
  http://APS2.toshiba-tro.de/KB0/TSB2A03EL0000R02.htm

  Software reader Toshiba fingerprint + _ + _

  _Issue description: _
  Toshiba Fingerprint Software is not supported under Windows 8. Fingerprint records will be lost during the upgrade process.

  * Note: *.
  + Remember your Windows password. You will need to enter after the upgrade. If you have a fingerprint reader, fingerprint records will be lost during the upgrade process, which is connected to the Windows 8 will not be via a fingerprint authentication more. +

• Portege R830 - Windows does not start after I have install Comodo Firewall

  Good afternoon

  I bought today a Portege R830, and after the Windows configuration, the first program that I installed was the popular free Comodo Firewall. After that I restarted, Windows 7 unbootable. It would be stuck on the user login screen and I know it's a problem with the firewall because if I do a system restore to the restore point created by Setup of firewall, windows restarts.

  So I ask if there is any inconsistency between the firewall and software on the Toshiba. A that someone already had this problem? I tried to solve this problem throughout the day with no results. I even re-installed Windows 7 using the Toshiba Recovery and the problem persists. I really like the Comodo and I want this firewall on my laptop, but Windows does not just start!

  Any help would be apreciated.

  Hi jillefsky,.

  Have you disabled the Windows Firewall before you start with the installation of Comodo Firewall? As far as I know, Portege R830 is delivered with preinstalled McAfee security software and you must remove this program before you install other security tools.

  Generally this has nothing to do with Toshiba and it s advisable to contact Comodo directly. They may know about this so they can give you a proper answer.

  But I put t understand why this program is so important to you. Windows already has an internal firewall so that these programs are not necessary in my opinion. Just install a good antivirus like AntiVir and enable the automatic updates of Windows. All that s!

• Portege R830 - Download Cant PT321E value added package driver.

  Hello!
  I can't download the toshiba.eu/support/drivers/laptops/ driver for

  Toshiba Portege R830 - PT321E
  Windows 7 64 bit
  Location - Latvia

  Download keeps failing sometimes to 10% to 50% complete.

  Sometimes the page is inaccessible. Tried to download the driver of different networks.

  Thank you.

  Today, I tried again to download the driver package. Downloaded without any problem.
  Wasn't the best place where to post about him, but I couldn't find it on the page where I can report problem Web page technique.

• Portege R830 - functional keys not working after installing Windows 7

  Hello
  I have Toshiba portege R830.
  I install new windows 7, no recovery - new windows.
  Now, I have a problem because my function keys don't ' t work.
  I can't turn on y wifi with fn + F8.
  I was looking for drivers, but I don't ' get there for my toshiba.

  Originally posted by Tomasz
  

  Hello
  I have Toshiba portege R830.
  I install new windows 7, no recovery - new windows.
  Now, I have a problem because my function keys don't ' t work.
  I can't turn on y wifi with fn + F8.
  I was looking for drivers, but I don't ' get there for my toshiba.

  Have you installed the VAP (value added package)

  That should restore the functionality of your

• Need to check the update of the BIOS Portege R830 without Intel TXT

  Hello Forum,

  I have exactly the same problem as described here 2 years ago:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65519

  I need to update my BIOS, but I can't because the update of the BIOS told me that the Intel TXT is enabled.
  Unfortunately I can not disable it in my bios. Its just not selectable. The 'cursor' jumping just above him.
  I can only 'hide' which does not help.
  I have the same thing for the VT - x and VT - d setting in the BIOS. Is not selectable or editable as well.

  TPM is not active if...
  I installed after infineon and he tells me I need to enable the TPM in the bios to use. :-(

  I have a very old Bios Version 3.1 and I read in the changelog that there are a lot of TPM in v 3.4 and 3.5 related changes...

  In any case...
  A P007Dv360A_EC77V140.zip file has been transferred to 2shared.com who fixed it at the time, a user named Paolo30.
  Unfortunately, that this file has been deleted on 2shared.com

  can someone please provide this file (or an update of the bios later) which resolves this issue?
  Thanks in advance.

  Portégé R830 - 10 p belongs to the series of PT321 if you need the BIOS for Portege R830 PT321

  You can download older versions of pages driver Toshiba BIOS.
  For example: http://www.toshiba-asia.com/sg/support/drivers

  On this page of Toshiba Asia I could find all the BIOS for this Portege model.